Used Mesh Waving Loom for sale (793)

Condition: new, Year of construction: 2021, Mesh shelf/support shelves for pallet racking Data: - 3-part, galvanized, for 270 x 110 cm shelf ( 99 € net ) - 4-part, galvanized, for 360 x 110 cm shelf ( 132 € net ) - New from stock - Load capacity: 1000 kg per grid, with evenly distributed load -MULTIPLE AVAILABLE! Price: 99,00 € net + legally valid VAT. Ledpfx Adsya U Egj Nerg You will receive an invoice with VAT shown. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning and ordering to installation. Delivery is available on request at a reasonable price.

Condition: new, GRATINGS FOR PALLET RACKING 270CM/110CM SHELVING BAYS Gratings for pallet racking 270 cm x 110 cm bays Data : - Length per module : approx. 890 mm - Width per module : approx. 989 mm - total width : approx. 2670 mm - total depth : approx. 1095 mm - suitable for 2700 x 1100 mm shelf bays - 1 level consists of 3 pcs. Gratings - Edging : T-profile 42 mm - Mesh size : 80 x 40 mm - Load capacity: 1000 kg per grating, with evenly distributed load - Surface : hot-dip galvanized - New from stock -AVAILABLE SEVERAL TIMES! Price: 189,00 € net plus legally valid VAT. Lsdjya U D Nopfx Ad Njrg You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Year of construction: 2001, condition: used, Combined rinser and filler for 0.5 litre, 1.0 litre and 1.5 litre PET bottles. Output: 24,000 bottles/h A chlorine dioxide dosing unit and a sterile water supply are connected to the rinser. The filler is equipped with a screw capper. The filling quantity is controlled via flow measurement. Liquid nitrogen dosing is possible via a mobile system. Additional title: PET bottle sanitising and filling system Capacity: 24000 b/h Formats: 0,5 l, 1,0 l und 1,5 l PET-bottles Running direction: left -> right Lsdpfx Adjx T Ando Njrg Operation / Control: Touch-Panel / Simatic S 7 Material: mainly stainless steel Position: free standing Features: Stainless steel enclosure, plexiglass protective screen opening upwards; 70 rinsing valves on the rinser; 80 filling valves; filling quantity recording via IDM; Alcoa capper 28 mm Bericap; Prominent chlorine dioxide dosing; filtration system for sterile water, mobile liquid nitrogen dosing; pneumatic screw cap feed (approx. 25 m); 2 basements for a total of 3 mesh box pallets with screw caps

Condition: refurbished (used), Year of construction: 1992, operating hours: 3,998 h, functionality: fully functional, machine/vehicle number: 100175, We are selling a used Franke drum washing system for washing bulk goods, primarily for turned and milled parts. Facilities of the facility: Tanks made entirely of stainless steel 600 liter washing tank with 18 KW heating 600 liter flushing tank with 18 KW heating Insulation of both tanks Weekly timer for the heating Washing drum can be switched via rotary button, 360° rotation or standstill when washing and rinsing including speed sensor Exhaust fan with 900 m3/hr. Oil separator over large disc skimmer with pan and ball valve automatic water dosing / Geka coupling at the rear 2 washing baskets 530 x 300 x 200 mm with tension lid, mesh size 6x6 mm 50 kg load per washing basket Pneumatic door opening and switching from washing to rinsing To be attached to the front frame as a basket support with 4 M12 screws Drain taps for washing and rinsing tanks as well as two large maintenance hatches Good accessibility on all sides, 2 x folding doors at the front and the remaining side walls can be removed using quick-release fasteners Rexroth pneumatics Grundfos stator pump in the washing and rinsing tank 63 A Mennekes plug with 5 meter cable Rital control cabinet with accessories inside operation manual Machine ready for immediate use Delivery and commissioning possible after consultation and cost assumption Lsdpfx Adeqwnypj Njrg If you have any further questions, please write or call

Year of construction: 1986, condition: good (used), screen deck: approx. 2.000 x 7.000 mm incl. 30 kW E-motor incl. springs and spring support incl. screen meshes Lodpenub N Tofx Ad Nsrg

Year of construction: 2002, condition: good (used), functionality: fully functional, doubledeck screen box: 1.000 x 5.000 mm Lrodjlxzkkjpfx Ad Neg squared meshes on both screen decks E-motor 4 kW steel-construction and outlet chutes

Condition: good (used), functionality: fully functional, Screen area: approx. 1,100 x 3,000 mm Upper deck: 40x40mm square mesh screen Lower deck: 4x4mm plastic screens Piping and water spraying on both decks Lrjdpeu Dhigsfx Ad Nog 5.5 kW electric drive Semi-mobile steel construction with access on both sides, bypass platform and railing

Condition: used, net cooking length ± 12.500 mm Ledpfx Adsx Tp Ece Nsrg belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyork washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 electric power : 26 kW 400V

Year of construction: 2026, condition: new, The PT-400 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Capacity: up to 500 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 0.8 kW, 230 V Dimensions L × W × H (mm): 1940 × 1000 × 1250 Weight: 500 kg Belt width: 400 mm Belt speed: adjustable Juice collection tray with sieve, mesh size Ø 1 mm Ledofgl Hfopfx Ad Norg Juice pump

Year of construction: 2026, condition: new, The PT-1000 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Lodpfsfglxxjx Ad Nerg Capacity: up to 900 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 1.5 kW, 230 V Dimensions L × W × H (mm): 2230 × 1190 × 1250 Weight: 700 kg Belt width: 500 mm Belt speed: adjustable Juice collection tray with sieve, mesh size Ø 1 mm Juice pump

Condition: used, empty load weight: 1,020 kg, maximum load weight: 1,480 kg, overall weight: 2,500 kg, loading space length: 3,700 mm, loading space width: 1,800 mm, loading space height: 2,390 mm, tire size: 195/65R15, Alufelgen, Year of construction: 2025, Elegant design, rot-proof as it is wood-free and comprehensively equipped - that is the CARLINER-L horse trailer. When selecting the material, the manufacturer was certain that it could only be a noble all-poly horse trailer. The material must not absorb moisture so that the body does not rot and the trailer must be extremely stable, especially for horse transportation. This is how the elegant CarelinerL models without wood came about. The floor is a sandwich panel made of plastic and aluminum. The walls and tailgate are made of polyester with a hard foam plastic core inside. An overview of the extensive standard equipment of the all-polyester horsebox for two horses. All-poly body wood-free, panoramic roof for more brightness in the interior, plastic floor, large entrance door, ramp flap with lifting aids, rubber mat on flap with step bars, rubber mat on floor, black aluminum rims, pivoting and removable center post partition wall, interior light, step protection, side padding, height-adjustable stall bars, mesh roller blind, BodyProtect+ chassis with coil springs, 3rd brake light, 100 km/h shock absorber, 100 km/h brake light, 100 km/h shock absorber. brake light, 100 km/h damper and approval, automatic support wheel, sturdy hot-dip galvanized frame and V-drawbar. The very large tack room is equipped with a pull-out holder for two saddles, extra door to the interior, bridle holder, crop holder, storage compartment, mirror, luggage net, shovel, broom, two feed buckets and it is lockable. Like the basic equipment, the horse trailer accessories are also very comprehensive to suit you and your horse. Here you have the choice of the following additional equipment such as drawbar protection cover, anti-theft device and a scratching mat is also available. Lsdpfetzki Asx Ad Norg The body is splash-proof.

Condition: new, empty load weight: 900 kg, maximum load weight: 1,500 kg, overall weight: 2,400 kg, loading space length: 3,450 mm, loading space width: 1,700 mm, loading space height: 2,390 mm, tire size: 195/65r15, alufelgen, Elegant design, rot-proof as it is wood-free and extensive equipment - that's the CARLINER-M horse trailer. The extensive standard equipment of the full-polyester horse transporter for two horses at a glance. Full-poly construction, wood-free, walls in dark gray and roof in black, panoramic window, synthetic aluminum floor, large entrance door, ramp flap with lifting aids, rubber mat on flap with steps, rubber mat on floor, partition wall can also be removed, interior light, kick protection, side cushions, aluminum rims, height-adjustable box bars, mesh roller blind, chassis with 100 km/h damper and approval, automatic support wheel, stable frame hot-dip galvanized and V-drawbar. The large tack room is equipped with a pull-out holder for two saddles, bridle holder, whip holder, two storage compartments, mirror, luggage net, shovel, broom, two feed buckets and it is lockable. The structure is splash-proof.  ----- You can also find all of our low-cost offers on our homepage Delivery throughout Germany (except islands) possible! Please feel free to ask us about the prices. ----- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Lsdpfx Adef Ew Tco Nsrg Pick-up times: Monday - Friday – 9.30 a.m. – 6.30 p.m. Pick-up is not possible on Saturdays!

Year of construction: 2001, condition: refurbished (used), functionality: fully functional, with safety system for solvent-based substances according to DIN 1539, including exhaust air fan, supply air cage filter, as well as concentration monitoring and recirculation filter wall in the interior Completely overhauled, 12 months warranty -Internal dimensions (WxDxH): 1000 x 1000 x 1500 mm -External dimensions (WxDxH): 1900 x 1430 x 2315 mm -Volume: 1500 liters -Max. temperature: 300°C -Eurotherm Controller 2404 (20 programs, each with 16 segments) -Eurotherm data recorder -Connected load: 29 kW -6 mesh shelves included, as well as V2A support brackets -Minimum exhaust air volume flow: 360 m³/h -Maximum permissible solvent quantity: 36 g at nominal temperature of 300°C -with concentration measurement -Window seals renewed -Approximate net weight: 1200 kg -Including documentation, CE Declaration of Conformity Viewing possible by appointment in our warehouse. We supply new and used industrial furnaces. Contact us! Oven, drying oven, kiln, heat oven, heating cabinet, industrial oven, paint dryer, tempering oven, heating oven, annealing oven, temperature oven, drying cabinet, chamber oven, curing oven, recirculating air drying cabinet, recirculating air oven, solvent oven Lsdevcb U Ajpfx Ad Njrg

Condition: good (used), Permanent magnet with Prism for waves from a 70 mm diameter Ledpfedf Ra Dox Ad Nsrg Height 220 mm Width 340 mm 185 mm deep

Condition: new, machine/vehicle number: 087c7b6bc0c6118a84279fb46, empty load weight: 4,100 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the center for fastening the winch cable 12 lashing eyes centrally embedded in the floor, 5 tons each, (not included in Incl. rear sloping) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. In each case 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m Lrodpfx Aei Riytsd Nsg control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension belts. Ramp tip offs

Condition: new, machine/vehicle number: c78894767223a51dd199030f3, empty load weight: 4,600 kg, Further information Ledpfjk Unitex Ad Nsrg Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4105 mm and 3rd to 4th axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the middle for fastening the winch cable 12 lashing eyes centrally embedded in the floor, each 5 to. (not included in Inkl. rear slope) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. Each with 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 192378-16-001, total length: 6,000 mm, total width: 2,400 mm, total height: 2,750 mm, overall weight: 6,000 kg, Equipment: type plate available, Contact Oven "Hitec", type BG 600-3600 E continuous grilling line All stainless steel with lower and upper belt: lower and upper heating Belt temperature adjustable separately Mesh length: 3,600 mm Belt width: 600 mm Lrsdpfx Adswxvqpj Nsg Electrically heated 136 kW Belt washing system Temperature range from 50 to 260°C Adjustable speed Dimensions (L x W x H): approx. 6,000 x 2,400 x 2,750 mm year: 2021 Condition: Like new

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Lodpfxexmt Eqo Ad Njrg

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: Lsdsxl Dbtspfx Ad Nsrg • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Year of construction: 2016, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21384 Specifications: Approx. 2016 model Screening area: 5.6 m² 3-deck unit Comes with four screen meshes Lrodpfx Adsxx H Rke Nsg Stationary Fully functional Video available Description:Circ-Bear screening plant from around 2016.The machine has been in regular operation since installation, with services carried out as scheduled.It’s a 3-deck screen but has mainly been used for two fractions.Includes four screen meshes. Delivery by agreement. Own weight: 111 Model: Fleximat PPM

Condition: used, Year of construction: 2019, operating hours: 11,169 h, Serial number: 18xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18852 Specifications: Year: 2019 Hours: approx. 11,200 Weight: ~49,000 kg Power: 310 kW Lsdpevg A D Tofx Ad Nerg Full service history (Pon Equipment) Fine cone crusher Integrated screening unit Includes screen meshes Output fractions: 0–4 mm, 4–8 mm, 8–16 mm Large feed hopper with conveyor Lights Ready for delivery Description:High-capacity Metso LT220D cone crusher with integrated screen.Compact, mobile and easy to set up – takes approx. 30 minutes after transport.Can handle: 0–160 mm material through the screen 32–160 mm material directly into the crusher Well-maintained through service agreement with Pon.Includes several screen meshes and spare parts.Ready for immediate delivery. Hours: 11169 Own weight: 49000 Total Weight: 49000 Kw: 310 Model: Lokotrack LT220D Finknuser m/ sikt, matekasse og transportbånd

Condition: like new (used), Year of construction: 2004, Retrofitted: 2026 Lodpfx Aeu T S Dwed Nerg Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 5600 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmVertical capacity (VC): 450 / 1450 mmDistance between columns: 2700 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 25000 kgMachine weight approximate: 56000 KgMachine dimensions approximate: 13200 x 5425 x 5350 mm Accesories Guarding: 2 sliding doors and new perimetral wire-mesh security omatic tool changer: OptionalChip conveyor: 1 transversal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features

Condition: like new (used), Year of construction: 1996, Retrofitted: 2026 Lredewfunyopfx Ad Nsg Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 6000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mmY axis traverse: 3800 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm (direct exit)Distance between columns: 3100 mm Milling head Universal head UM40 (Body B: manual / Body C: 3º auto-indexing) Direct spindleTool clamping system: HydraulicTaper nose: ISO50 (DIN-69871)  /  Pull stud: DIN-96872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 50000 KgMaximum weight on table: 15000 kgMachine dimensions approximate: 14740 x 5330 x 5050 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceHead changer: automatic with lateral hinge/support in columnChip conveyor: 2 longitudinal palletsElectronic handwheel: New HR-510Coolant: External Internal high pressure through spindle (internal only with direct exit head) Sales conditions Guarantee: 6 months mechanical spare partsSale conditions and price: On request View all technical features

Condition: like new (used), Year of construction: 2010, Retrofitted: 2026 Lredpfx Asxlliljd Njg Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 8500 x 2500 mmNumber of T slots: 17T slots dimensions: 22 mm Traverses of axis X axis traverse: 8000 mmY axis traverse: 3800 mmZ axis traverse: 1500 mmVertical capacity (VC): 168 / 1668 mmDistance between columns: 3100 mm Milling head Auto-indexing differential head UAD (every 0,02º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871) / Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 35000 kgMachine weight approximate: 79000 KgMachine dimensions approximate: 22700 x 7660 x 6800 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceAutomatic tool changer: ATC-60Chip conveyor: 2longitudinal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features

Year of construction: 2011, condition: like new (used), Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Lodpfxexwzxto Ad Nsrg Technical features Dimensions Table dimensions: 12500 x 2250 mmNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 11500 mmY axis traverse: 1500 mmZ axis traverse: 2000 mmVertical capacity (VC): 150 / 2150 mm (adjustable) Milling head Head type: Universal Auto-indexing UDG (2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y-Z): 30000 mm/min Weight and dimensions Maximum weight on table: 15 T/m2Machine weight approx.: 62000 kgMachine dimensions approx.: 18494 x 8412 x 5290 mm Accesories Guarding: front doors and new edge wire safety mesh fenceAutomatic tool changer: ATC40Chip conveyor: 1 longitudinal rear hinge typeExternal coolant high-pressure coolant through spindleElectronic handwheel: HR-410 Sales conditions Warranty: 6 months mechanical partsSale conditions: On request View all technical features