Screening machine

ASCO SD Compact - 2024

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 1,500 kg, total length: 3,340 mm, total width: 2,360 mm, total height: 2,925 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD Compact is built for recycling, construction, soil processing, biomass handling, and material preparation, delivering efficient screening of soil, gravel, wood chips, waste, and chip bundles. Its modular design, high flexibility, and multi-fraction capability provide maximum productivity, low operating costs, and fast adaptation to any site. Gbsdpfxjw Skkcs Agbog Key Features: • Modular drum system for up to four fractions in one segment • Adjustable drum rotation speed and screen inclination • Optional bunker expansion +50% input capacity • Quick-change drum & bunker system • Vibration support, cleaning brush & two-wheel drive Tech Highlights: L 3.34 m · W 2.36 m · H 1.95/2.92 m (with support) · Mesh Ø6–Ø100 mm · Drum Ø 1.3 m · Drum L 2.1 m (usable 1.7 m) · Screening area 7 m² · Qmax 20–50 t/h · Hopper opening 2.24 × 0.85 m · Filling height 2.55 m · System capacity 5–20 rpm · Power 5.5 kW (opt. 7.5 kW) / 400 V · Weight 1500 kg

Year of construction: 2012, operating hours: 6,000 h, condition: used, functionality: fully functional, For sale is a Terra Select T5 trommel screen, year 2012, with approximately 6,000 operating hours. The machine features a 55kW Perkins diesel engine and a two-part fine grain conveyor belt. It comes with one good 40mm drum, as well as a worn 20mm drum and a worn 15/12mm drum. The machine can be inspected and test-run on site. Gedpfx Asw N Hmusgbjbg

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Godpoff Sbisfx Agbsbg Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC. Gsdoghgd Ispfx Agbsbg These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed. The pipe is fed into a closed feed trough in which the pipe is pressed against the rotor by means of a hydraulic ram. The pre-shredded material is then fed from the shredder to a granulator via a conveyor belt. The granulator grinds the material into a directly processable regrind. The entire plant is operated automatically via a central control unit. Another advantage of the plant is the low energy requirement, the avoidance of power peaks, and the minimization of accident risks during pre-shredding.

Year of construction: 2023, condition: new, machine/vehicle number: 6YXXX23, SINC FEROX is the must have machine in scrap business, to reduce the volume or to prepare scrap for baling or just to get it in to size for melting. FREOX alligator shears are available from 300mm up to 1000mm cutting size, as longer the cutting blade, as higher the cutting force. Gbsdpfx Agjmqku Uobog The machines are able to operate with pedal, semi-automatic and full-automatic. The option to set the cutting opening is easy solved with the manual limitation. The machines are designed for to have minimal service needs; the blades are reversible to be reused on all four edges.

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Gsdpfolhqd Rjx Agbsbg Machine weight 16 to Place: Austria Aviable: 30.01.2025

Condition: new, functionality: fully functional, 8X4 (2.4 X 1.2M) DOUBLE DECK SCREEN Godpfjin E Hqox Agbsbg 2.2KW DRIVE MOTOR WEIGHT 1800KG LENGTH 5000MM WIDTH 2000MM HEIGHT 2300MM 4.5M FINES CONVEYOR 3KW GEARBOX DRIVE GASOLINE 8.5KW ONBOARD GENERATOR AGRI OR ROAD LEGAL WHEELS Worldwide delivery available, dealer enquiries welcome,

Condition: excellent (used), Year of construction: 2008, Horizontal conveyor belt URBAN - TBA26/38 HQR 7 pieces for sale Sale also possible individually Gbsdpjtr Eqfefx Agbsg

Condition: excellent (used), Year of construction: 2021, operating hours: 5,000 h, functionality: fully functional, Scissors. Guillotine. Set consisting of 2 pieces. Approx. 5000 hours (to confirm). For cutting: Textiles, foil, PP strips, non-woven fabrics, fishing nets and ropes, big bags, etc. Several videos on request. Working width 600 mm Total width 1470 mm Godpfx Ajtq Uc Njgbjbg Total length 4590 mm Cutting width 600 mm Cutting speed 220 rpm Installed power 22.5 kW Capacity 1000 - 3000 kg/h Net weight 3200 kg Cutting sizes 5 - 36 mm The guillotines are a 2-piece set, set in letters L, and can only be sold as such. The 2 machines are equipped with LCD touch control panels on which several languages are installed: English, German, Polish. The total power installed in the machine is 22.5 kW. Operating instructions - English. The video here presents the same machine and does not belong to us. More, our videos are available on your request.

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Gedpomqi Akofx Agbjbg