Screening machine

ASCO SD Compact + BC + DEC

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Blsdpfxsn Tpmue Adrsi

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, power: 261 kW (354.86 HP), Lindner Urraco U75 D on wheel axle with magnet and remote control, fully refurbished. Tools: 6-piece set, 7/7 discs in Hammel design (condition: 85%) Total operating hours: 9800. 2024: New gearbox, new hydraulic pump, new hydraulic motors installed, now approx. 600 operating hours. Bjdpfx Adsytdkfsrsli Discharge conveyor overhauled, magnet unit replaced. Tools 85%. Service newly performed. New paintwork. Immediately ready for use.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Bljdpow Am Nqsfx Adroi Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Central lubrication system for rotor bearings Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request.

Condition: excellent (used), Year of construction: 2002, 1 used steam boiler ----- - frame-mounted - - with integrated economiser - Manufacturer: LOOS, Gunzenhausen Model: UL-S 4000 Heating surface approx.: 80 m² Output: 4,000 kg/h Permissible operating pressure: 16 bar Increased test pressure: 30.4 bar Water content at nominal level approx.: 5,930 l Total water content approx.: 8,020 l Year of manufacture: 2002 Equipped with Weishaupt combination burner (gas/oil), RGL 10/1-D, version ZMD, 500 – 4,100 kW, gas control line, separate control cabinet, feed water pump, and existing coarse and fine fittings. Blsdpfxoy H Irus Adrji

Year of construction: 2012, condition: ready for operation (used), Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available. Bledpeucw S Sjfx Adrei

Condition: used, mileage: 663,035 km, power: 368 kW (500.34 HP), first registration: 02/2012, overall weight: 26,000 kg, fuel: diesel, Year of construction: 2012, Container grab with current inspection certificate Type: R500LB6X4HSA dead weight: 14960kg Techn. permissible total weight: 30000kg Maximum speed: 89 km/h Bsdpjulg Dqjfx Adrsli used, without warranty

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Bedpfsua Tbwjx Adroli Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Year of construction: 2023, condition: new, Rental system Hosokawa Alpine AS 200 Baseline. TECHNICAL DATA Chamber diameter 200 mm Blodsm Nbnrepfx Adrsi Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without aspirator) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 23 μm 33 kg/h Nifedipine 90% ᐸ 2.4 μm 8 kg/h Progesterone 90% ᐸ 9 μm 20 kg/h Diosmin 90% ᐸ 4 μm 8 kg/h Omeprazole 99% ᐸ 5 μm 3 kg/h Cosmetic powder 90% ᐸ 10 μm 15 kg/h A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2026, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. Bledoq I Nxdspfx Adrji 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Technical Specifications (Typical MINGYUAN Series) Model Category,Max Feed Size,Capacity (t/h),Motor Power (kW),Rotor Speed (rpm) Small (PC-400), ≤100mm, 5 – 10, 11, "1,000" Medium (PC-800),≤200mm, 20 – 50, 55, 750 – 900 Heavy (PC-1200),≤350mm, 80 – 110, 132 – 160, 600 – 750 Heavy Hammer,"≤1,200mm", "500 – 1,000+ ","400 – 1,000" ,Variable

Year of construction: 2022, condition: like new (used), Rental unit Blodpfxjd S D Uuj Adrji A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc. and can be exchanged on the same platform at any time. Dry grinding and classifying Depending on the function module, 1 or 2 identical high-speed motors are used for dry grinding and classifying, except the Piconizer. Wet grinding The wet mill uses a slower running motor with high torque. The drive controller of the motor is located in the platform. Mixing and particle design The batch mixer and the high-energy mixer for particle design use the same slow-running motor with high torque. The motor drive controller is also housed in the platform. THE ACCESSORIES Depending on the operating mode (continuous, discontinuous) and the batch size, numerous peripheral devices such as agitator vessels, dosing devices, product separators, external blowers or barrier pressure systems are available as an option and are designed for specific applications. The machine was operated as a pilot plant. There are also many modules and many accessories available for purchase or rent.