Used Measuring Machine for sale (67,220)

Condition: ready for operation (used), Year of construction: 2005, X-axis: 505mm, y-axis: 405mm, z-axis: 405mm, number of M8 threaded holes: 9, max. workpiece height: 545mm, max. table load: 180kg, accuracy: ISO 10360-2, resolution: 0.1µm, guide system: air bearings on all axes, traverse speed CNC mode: 8-300mm/s (max. 520mm/s), joystick rapid traverse: max. 80mm/s, slow: 0.05mm/s, measuring speed: 1-8mm/s (CNC), acceleration: 0.13g (max. 0.23g), measuring table material: granite, table dimensions: 638x860mm, compressed air consumption: approx. 50l/min at 0.4MPa, length: 1122mm, width: 1082mm, height: 2185mm, weight (incl. table and control): 515kg. An on-site inspection is possible. Dsdpjy Duq Eofx Albscl

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Dcjdpfx Ajxyungjlbol Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 1999, condition: excellent (used), Technical Data Year of construction: 1999, upgraded for CNC capability in 2005 1 column pair Table is a single piece and self-supporting Total weight: approx. 12 tons Max. axial speed: 150 mm/s Measuring table X = 7000 mm Y = 2850 mm Dodpfoff Eaqox Albecl Z = 600 mm Measuring volume X = 6200 mm Y = 1600 mm Z = 2100 mm Measuring accuracy Test report dated 20.04.2017: E = 50 + 40 µm/m, max. 120 µm EM = 70 + 40 µm/m, max. 140 µm P = 50 µm Accessories Control panel Dynalog P2 incl. stand Control system C99 2 RDS CAA swivel heads with CAA file 2 sets of RDS plate connectors Zeiss RST Other Boreholes for positioning system: several pilot holes Ø 22 mm in the rows Y+- 300 in a 300 mm grid in the rows Y+- 700 and Y+- 900 in a 200 mm grid Electrical power supply for machine: 230 V System requires 6 bar compressed air The machine can be upgraded with new software according to customer requirements. Price: on request! Installation and commissioning possible! We will gladly prepare a detailed offer for you!

Condition: used, Year of construction: 2020, x-travel 800 mm y-travel 700 mm z-travel 700 mm Control Wenzel max. workpiece weight 0 kg accuracy Renishaw SP 25 M Measurement inaccuray 2,6 µm Djdezgibzopfx Albscl repeatability 1,6 µm Longitudinal uncertainness MPE: 3,5 + L/0 µm (standard) Longitudinal uncertainness MPE: 3,5 + L/0 µm (extended)

Condition: good (used), machine/vehicle number: 565301951 / 565201951, Accessories Indexing tables BWF SII, 40 pieces Travel measuring system Renishaw Measuring plate 1 X = 8100 mm Y = 1750 mm Z = 300 mm Measuring plate 2 Dcjdodfddzjpfx Albol X = 8100 mm Y = 2000 mm Z = 300 mm Measuring volume X = 7300 mm Y = 1600 mm Z = 2800 mm The machine can be modernized with new software according to customer requirements. Price: on request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! (Changes and errors in the technical data, specifications, and prices, as well as prior sale, are subject to change!)

Condition: excellent (used), Year of construction: 2020, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Professional handheld measurement system for precise 3D measurements directly in production environments. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a dedicated measuring room, complex setup, or special CMM expertise. The device is ideally suited for manufacturing operations, quality assurance, initial sample inspection reports (ISIR/PPAP), in-process controls, as well as for reverse engineering. Technical Data – KEYENCE XM-C1000 / XM-H1000 (XM Series) Measuring System (General) Specification: Measurement range (XYZ): approx. 600 × 300 × 200 mm (depending on setup) Measurement accuracy: ±(8 + L/80) µm (L = measured length in mm) Repeatability: ±3 µm (typical) Resolution: 1 µm Measuring principle: Optical tracking with camera-based detection Calibration: User calibration with calibration sphere possible CAD Comparison: Directly on the device (STEP, IGES, etc.) Export formats: PDF, Excel, CSV, DXF Tolerance analysis: Automatic with color mapping XM-C1000 – Control and Evaluation Unit (Controller) Component: Display: 15” touchscreen Connections: USB, LAN, HDMI, power Storage options: Internal + USB export Software functions: Measurement, CAD comparison, report generation Operation: Touchscreen + pushbutton operation Languages: Multilingual (including German) XM-H1000 – Handheld Probe Specification: Probe type: Handheld with pressure button Feedback: LED status indicator, vibration signal Probe tip: Interchangeable, various tips available Tracking: Detected via controller’s camera system System Characteristics Specification: Operating temperature: 10 – 35 °C Power supply: 100–240 V AC, 50/60 Hz System dimensions (complete): approx. 800 × 600 × 800 mm (depending on setup) Total system weight: approx. 25–40 kg (depending on configuration) Mounting: On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld probe XM-C1000 (Controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & Delivery: Shipping via freight forwarding Dcodezii Dnjpfx Albel Collection by appointment possible. International shipping available on request. If you have any questions, need further information or wish to arrange a viewing appointment, please feel free to contact us. (Subject to changes and errors in the technical data and information!) We are also happy to answer any further questions by phone.

Condition: excellent (used), Year of construction: 2012, Mitutoyo measuring bench in excellent condition, located in a climate-controlled room at 20°C. Calibrated by Mitutoyo on na regular basis. Availability: 10/2026 Dedpfx Alozd R D Ejbocl SP25M motorized measuring head with PH10MQ probe Tactile and scanning measurement Scanning precision within 2.3µ Measurement precision within 1.7µ +0.4µ per 100mm Max. workpiece weight 1,200kg Granite table dimensions LxW Maximum height under bridge 800mm Software Mcosmos 3 and MiCAT

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Dedpfx Alow H Auqjbecl

Year of construction: 1995, condition: excellent (used), Technical Specifications Manufacturer: Brown & Sharpe Type: DEA Mistral Year of Manufacture: 1995 Measuring Range X = 1500 mm Y = 1000 mm Z = 900 mm Equipment Probe head: Renishaw PH10M Probing system: TP200 + probe changer with 6 storage locations Software: PC-DMIS Version 4.2, updated in 2008 PC (Windows XP), monitor, inkjet printer, computer desk The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! Dcjdpfxef Dvzcj Albol We will be happy to provide you with a detailed offer. Note: Our offer is exclusively for professional customers. (Subject to changes and errors in the technical data, information and prices, as well as prior sale!)

Year of construction: 2000, condition: used, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control WENZEL WPC 2040/FW31.351 total power requirement kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Dcodpfx Aljt Hw Nysbel Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus

Year of construction: 1986, condition: used, x-travel 2400 mm y-travel 1600 mm z-travel 1800 mm total power requirement kW Dedpfxet Hwxne Albecl weight of the machine ca. 3300 kg dimensions of the machine ca. m

Condition: good (used), Year of construction: 1991, functionality: fully functional, Coordinate measuring machine DEA Gamma 1203 Year of manufacture: 1991 Measuring range: X = 1500 mm Y = 1000 mm Z = 660 mm Dcjdozlqf Ejpfx Albjl Measuring software: PC DMIS 3.7 Renishaw rotary indexing head PH10M Probing system: Renishaw TP20 Vibration-damped measuring table Accessories: 4 additional probing heads TP20 Extensions Various probes Calibration sphere Condition: The measuring machine is in good condition. It is serviced and calibrated every two years, and any pending repairs have been carried out by our service provider. The machine is still in use and is used for sample testing of our manufactured parts. It can be inspected during operation by prior arrangement. Delivery from our location.

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t Dsdpjcxxrgsfx Albecl dimensions of the machine ca.:0,7 x 1,0 x 1,05 m surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc.

Year of construction: 1998, condition: used, x-travel 0 mm Dcedpfx Ajt Hwx Uolbjl y-travel 0 mm z-travel 0 mm total power requirement kW weight of the machine ca. 3500 kg dimensions of the machine ca. m

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1393, arm reach: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! Includes notebook and PCdemis 2016 software! TECHNICAL DETAILS FP2 Mobility Pack: included Measuring software: PCdemis (2016) Notebook: DELL M 6800 with a 17-inch screen and Windows 10 Dedszrd R Uspfx Albecl Tripod: Brunson heavy-duty rolling tripod, type 230 FIX Measuring range: 2,500 mm Accuracy class: 5 Number of axes: 6 Target single-point deviation: 0.020 mm Target volumetric accuracy: ±0.029 mm Arm weight: 8 kg Probe set: Probe with ruby ball 3mm, 6mm and with steel ball 15mm EQUIPMENT - Carbon fiber double-tube construction enables separation of stability and measurement - AbsoluteArm series can start measuring directly without referencing - Probing system with automatic probe recognition - Mounting plate with magnet - FP2 Mobility Pack - Transport case - Magnetic tripod - Test bar L = 700 mm - Test sphere D = 25 mm - Power supply with connecting cable - USB cable measuring arm - notebook - Dust cover - New pressure cylinder installed - Relabeling of the measuring arm before calibration 2023 - ISO 10360 acceptance with certificate 2023 is included Shipping conditions - Ex works, without additional packaging (measuring arm in case and notebook in protective cover) and Brunson rolling tripod – i.e. 3 parts - If the buyer arranges collection via a shipping company, the seller recommends special packaging (approx. 160 x 70 x 70 cm cardboard box on a pallet, with bubble wrap inside) and a Euro pallet (Brunson rolling tripod) at a price of €250, secured with strapping to the pallet.

Condition: used, Technical details: space requirements of the machine approx.: 2x Boxen: 0,85x0,55x0,40 / 0,10x0,55x0,4 m Aramis 3D Camera = robust design for high-end applications with high-resolution 3D sensor. Dedpfx Alsu N Auhsbjcl Camera resolution 1936 x 1216 pixel Frame rate (fps) 130 fps at full resolution; 24 fps at 1/2 image height; 450 fps at 1/4 image height: Aramis Adjustable = modular and flexible measurement system for research and industry with user-friendly application. without software (only via manufacturer ) *

Condition: like new (used), Year of construction: 2021, Keyece Lasertracker WM 3000, year 12/2020 Complete with notebook and handheld probe. Dedpfx Aley Nx Hhebocl Includes tripod and carrying case.

Condition: good (used), Year of construction: 1992, Measuring Range X – axis 700 mm Y – axis 600 mm Z – axis 450 mm Accuracy acc. ISO 10360 E = [4,0 + 5,5L/1000] µm at temperature range 18 … 22 °C wax. workpiece weight 500 kg base material granit Djdpfx Alohrulkobjcl fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm DCC Controller Mitutoyo CMMC-3S DC motors all axis Guideways air bearings Tilt&swivel head Renishaw PH1 (PH10 on demand) Probesystem Renishaw TP200 Computer Windows 10 Workstation Software MCOSMOS-1 V3.5

Year of construction: 1993, condition: good (used), Measuring Range X – axis 700 mm Y – axis 1500 mm Z – axis 600 mm Accuracy acc. ISO 10360 E = [4,0 + 5,5L/1000] µm at temperature range 18 … 22 °C wax. workpiece weight 800 kg base material granit fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm DCC Controller Mitutoyo CMMC-3S Dcodpogvg I Tsfx Albel DC motors all axis Guideways air earings Tilt&swivel head Renishaw PH1 manual, PH9 or PH10M as option Probesystem Renishaw TP200 Computer Windows XPP Workstation Software MCOSMOS-1 V2.4

Condition: excellent (used), Year of construction: 1997, Measuring Range X – axis 500 mm Y – axis 600 mm Z – axis 300 mm Accuracy acc. ISO 10360 E = [3,0 + 4,0L/1000] µm at temperature range 18 … 22 °C max. workpiece height 440 mm wax. workpiece weight 250 kg base material granit dimension measuring table 640 x 1280 mm fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm DCC Controller Mitutoyo CMMC5 Djdofmp Ttspfx Albjcl DC motors all axis Guideways air earings Tilt&swivel head Renishaw PH9 Probesystem Renishaw TP200 Probe Changer SCR200 Computer Workstation (Windows 10) Software MCOSMOS-1 V2.4

Year of construction: 2002, condition: used, z-travel 200 mm Clamping diameter of the cutter heads max. 550 mm Max. permissible cutter head weight 150 kg Mounting plate diameter for cutter heads 360 mm Mounting cone for cutter heads Nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the Djdjy A S U Sjpfx Albjcl cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: ready for operation (used), Year of construction: 2020, An optical 2D coordinate measuring machine Werth is available. Measuring range X/Y: 400mm/200mm, electrics: VDE 0113, magnification: 0.2x. Machine dimensions X/Y/Z: approx. 800mm/600mm/1200mm, weight: approx. 200kg. Including two computers, software, and one replacement glass pane. Documentation available. An inspection on site is possible. Dcodpfsyxq U Asx Albel

Condition: used, Year of construction: 2010, Mobile measuring arm for measuring machine, measuring device Manufacturer: Zett Mess Type: AMPG 2400 Precision Year of manufacture: 2010 – unused Measuring diameter: 2,400 mm Djdpswu E D Refx Albscl 22726

Condition: ready for operation (used), Year of construction: 1992, X-axis: 3000mm, y-axis: 1200mm, z-axis: 1500mm, touch probe: PH10, probing system: TP 20mm, probe diameter: 4mm, probe length: 25mm, completely overhauled in 2018. An on-site inspection is possible. With documentation. Dsdpfx Aoxt Rluolbecl

Condition: good (used), Year of construction: 2013, Coordinate measuring machine HEXAGON Optiv Classic 321 GL, serial number 6K012-3, with computer DELL Precision T3500, Intel Xeon processor, TESA Bugnon 38 remote control, purchased in 2013, last calibration 09/2017. Dcsdpfeztc A Sjx Albsl