Used Measuring Machine for sale (85,363)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Hjdpsxyungjfx Ah Nong Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control.

Condition: good (used), functionality: fully functional, For sale is a Zeiss measuring machine including accessories. TYPE C100 413508 Serial number: 574203951 Last calibration: 22.06.2021 Hedpfx Ahjxyhhmj Nsng Weight: 375 kg Measuring plate dimensions: L2 m x W1.10 m x H0.7 m Dimensions with measuring stand: W1.50 m x H2.60 m Inspection possible by appointment in 71139 Ehningen.

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 50 kg, warranty duration: 12 months, total height: 1,950 mm, type of input current: AC, total width: 1,900 mm, total length: 2,020 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, overall weight: 5,800 kg, input voltage: 230 V, compressed air connection: 6 bar, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Reference Measuring Device Mahr OMS 1000 Multisensor The all-round measuring device for the broadest range of components or pallet measurements Factory-refurbished premium multisensor measuring center with warranty, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or freight forwarding, worldwide. Online or on-site demonstrations with customer parts available, application-specific consultation by accredited Profitech metrology laboratories during project planning. Full service possible: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Customized training and education programs also available as online courses. Rental, hire-purchase, or financing possible directly through Profitech and without a financial institution. Measuring device can be configured individually to customer requirements. Measurement accuracy: E1 = 1.3 + L / 400µm E2 = 0.9 + L / 600µm E3 = 2.2 + L / 300µm Measuring range: approx. 1000 x 1000 x 350 mm Includes optical sensor (camera & laser) Renishaw TP200 probe system incl. Standard Force Module CNC control incl. hand control panel 27-inch flatscreen monitor Evaluation station incl. Windows 10 operating system (Windows 11 available on request) New Opticheck 3D 5.0 software Active vibration damping (pneumatic) suitable for production-related measurements Optical sensor: • Pure grayscale image processing • Fast, digital image processor • Automatic feature and edge filter • Error documentation via program-controlled video image storage • Multifunctional multi-window technology • White telecentric transmitted light • Coaxial reflected light • 3D multi-sensor head Laser Sensor: Laser preparation for laser autofocus. Software-controlled intensity regulation for adaptation to different materials. Software: • Full version WITHOUT subscription model or maintenance contract Hedpfexbpgtex Ah Nsng • User-friendly, interactive programming • Symbolic representation of the program structure • Multitasking enables parallel measuring and evaluation • Powerful basic editor for customer-specific programs • Automatic sensor calibration • Geometry elements: point, line, circle (envelope, best-fit and circumscribed circle), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Form & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, perpendicularity, inclination, position, symmetry, concentricity, run-out, total run-out, flatness run-out, total flatness run-out • Maximum material condition (MMC) • Up-to-date tolerance tables according to common DIN standards • Software module for creating any factory-specific tolerance tables

Condition: excellent (used), Year of construction: 2022, Also for direct use on the processing machine. RRP approx. €50,000 Documentation -Laptop including software -Measuring device with table and camera -Measuring probe -Tripod for measuring in the machine or for large workpieces -Charger including spare battery for measuring probe Hnodpfxev N Dzrj Ah Njg

Condition: defective spare-parts repository (used), Table size: 1300 x 950 mm Hedpsicnk Ejfx Ah Nsng The device is not functional! Chassis for sale,

Condition: good (used), - x-coordinate: 0 ... 250 mm - y-coordinate: 0 ... 125 mm - z-carriage with measuring head: 190 mm - max. height of measuring object: 170 mm - permissible mass of measuring object: 50 kg For all further technical data, please refer to the images starting from image 5. Hodpfjxr Ap Nsx Ah Nsng

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Coordinate measuring machine Mitutoyo EURO M 574 in excellent condition for sale. without computer and software Hodpou E Uzxefx Ah Njng year of manufacture: 1998 without PC!!! X - axis 500 mm Y - axis 700mm Z - axis 400 mm resolution: 0.0005 mm Measuring table material Granite Renishaw MH 20i probe head, Granite bed size 850 mm x 1160 mm, length standard: high-precision linear encoder centering microscope: mitutoyo CF-10 fixing and fine adjustment: one-touch air clamp for each axis continuous fine adjustment throughout the entire stroke range of each axis. effective size: 680x1160 workpiece clamping method: threaded insert M8X1.25 workpiece: Dimensions between columns 720 mm, maximum height: 480 mm maximum weight: 160 kg without PC Length measurement uncertainty ISO 10360 E = [3.5 + 4.0L/1000] µm in the temperature range of 18 ... 22 °C machine weight: 450/540kg

Condition: good (used), functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, Optical Multisensor Measuring Machine HEXAGON OPTIV CLASSIC 321 GL tp Excellent condition, available for inspection at a specialist company for industrial metrology – commissioning, calibration etc. can be arranged upon request! - Year of manufacture: According to Hexagon, likely 2015 - Machine number: 7F001-7 - Condition: Good - Delivery terms: Loaded free on truck (unpacked) - Location: 66127 Saarbrücken - Availability: Immediately (subject to agreement) - Payment terms: Advance payment by bank transfer - Internal No.: OCU Available for inspection under power: YES Technical data: - Metrology software: PC-DMIS Vision - Vision sensor for non-contact measurement of very small and precise components - CCD camera with 6.5x motorized CNC zoom - DC servo motors - Modular probe changer: TESASTAR - Linear guides on all axes - Coaxial LED top light (white LED) - LED backlight (green LED + diffuser disc) - Multi-segment LED ring light - Maximum feed rate in X, Y, Z axes: 160 mm/s - Maximum workpiece weight: 20 kg - Measuring resolution: 0.05 µm - Measuring accuracy in X, Y axis (optical sensor): Ex, Ey = (1.6 + L/250) µm - Measuring accuracy in XY axis (optical sensor): Exy = (2.0 + L/250) µm - Measuring accuracy in Z axis (optical sensor): Exy = (3.9 + L/200) µm - Measuring accuracy in X, Y axis (tactile probe system): Ex, Ey = (2.0 + L/250) µm - Measuring accuracy in XY axis (tactile probe system): Exy = (2.5 + L/250) µm Hodpfx Asxfagroh Njng - Measuring accuracy in Z axis (tactile probe system): Ez = (2.9 + L/200) µm - Measuring range (optical sensor) X 300mm Y 200mm Z 150mm - Measuring range (tactile sensor) X 230mm Y 200mm Z 150mm Scope of delivery: - PC including measurement software PC-DMIS Vision - Documentation / manuals - Clamping devices / stops for workpieces to be measured Probes: - 3 x stylus holder HP-TM-SF - 1 x stylus holder HP-TM LF - 2 x stylus Ø1 x 10 - 2 x stylus Ø2 x 12 - 1 x stylus Ø3 x 20 - 2 x stylus Ø1.5 x 20 - 1 x stylus Ø2 x 20 - 1 x stylus Ø2 x 10 - 1 x stylus Ø3 x 10 - 1 x disc stylus Ø6 x 1.2 x 10 - 3 x extension Ø3 x 10 - 1 x extension Ø3 x 20 - 1 x angle piece (individually adjustable) - 1 x stylus rack for holding 4 styli Dimensions & weight: - Installation dimensions (L x W x H) approx.: 705 x 986 x 890 mm - Weight approx.: 170 kg ℹ️ If you have any questions or wish to arrange an inspection, please contact us. ⚠️ Additional notes: ► The goods are sold under exclusion of any warranty ► Technical data subject to change ► Prior sale reserved ❗ Sale to businesses only ❗

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 2,000 mm, type of input current: AC, total width: 1,000 mm, total length: 800 mm, overall weight: 800 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 400 Multisensor Measuring Device equipped with camera and Renishaw touch probe system Fully functional with factory acceptance before delivery! Comprehensive maintenance history Measuring range: 400x200x200 mm Maximum workpiece weight (glass plate): 15 kg Instrument weight: 800 kg Control cabinet weight: 90 kg External dimensions: 800x1000x2000 mm Maximum traverse speed: 150 mm/s Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measurement length in mm) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt 2025. Includes the latest software update for Windows 10 (Windows 11 upgrade and OptiCheck3D 2025 available as options), including free lifetime software hotline and user support. Optional: Delivery via factory service or forwarding agent, worldwide. Optional: On-site commissioning & calibration Optional: Training service Online and on-site demos available with customer parts, application consulting by accredited Profitech metrology laboratories during project planning. Hnedpfxow Slafs Ah Njg Available complete service: – Delivery, installation, commissioning, acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and education programs also bookable as online courses. Creation of your measuring programs for direct operation with the device is also possible. Rental, lease-purchase, or financing possible directly via Profitech without any financial institution. The measuring device can be individually configured to customer requirements (within the EU). Reference number: 01814-1-ms400 (Please always include this with inquiries)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: SN 102687, The Zeiss UMC 850 coordinate measuring machine shown in the pictures is for sale in working condition. Please feel free to contact us if you have any questions. Hedpfx Ahjxvzzfo Nsng

Condition: ready for operation (used), functionality: fully functional, repeat accuracy: 0.002 mm, table load: 50 kg, rotary table diameter: 500 mm, The offer consists of the following components: VL-770 Probe Head – High-resolution optical 3D scanner VL-700 Control Unit – Control and evaluation unit, including software interface VL-C35 Cover – Light protection hood VL-A3D Software Package – Measurement and evaluation software (German) OP-88145 Calibration Plate – Reference plate VL-H3G Module – Geometric dimensioning and tolerancing (GD&T) module VL-H3R Module – CAD conversion module VL-B1 Accessory – Calibration ball gauge OP-99031 Cable – AC power cable TECHNICAL DETAILS Repeatability (σ): 2 µm Measurement accuracy: ±10 µm Measurement resolution: 9 million measurement points Measuring range Low magnification: Ø300 × H200 mm High magnification: Ø70 × H50 mm Work Table Rotary table: 500 mm Rotation mechanism: 360° XY movement of object stage: Ø200 mm Tilting mechanism: up to 45° Maximum load capacity: 50 kg MACHINE DETAILS Weight Weight of control unit: 3.7 kg Weight of object table: 26 kg Weight of cover: 5.5 kg Hnodpfx Aexvyygeh Nog Weight of measuring unit: 19.6 kg EQUIPMENT Original software and manuals Calibration plate Protective hood Monitor, PC, keyboard, and accessories

Condition: used, Year of construction: 1998, Technical details: x-travel: 870 mm y-travel: 870 mm z-travel: 800 mm table surface area: BxT: 1.260 x 1.050 mm distance between columns: 1.260 mm Laser measuring system with ZETT3D geometry program The table is made of granite and has 48 mounting holes M6 integrated. With interface module Renishaw type P14-2 On machine is currently installed a shaft with probe pin 60mm (without extension) Probeset Renishaw type PH-1 stored in a wooden box. Operation manually, operated control panel with 2 control knobs, keyboard and 4-line LCD display. Accessories: various probe tips and extension, calibration ball Printer Hnedsu N At Rjpfx Ah Neg Computer (Software Windows NT) Last calibration was at 06/2006. *

Condition: like new (used), Year of construction: 2017, functionality: fully functional, measuring range X-axis: 460 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 420 mm, workpiece weight (max.): 227 kg, total height: 3,380 mm, type of input current: AC, total width: 1,030 mm, total length: 1,300 mm, overall weight: 275 kg, input voltage: 230 V, compressed air connection: 5 bar, year of last overhaul: 2025, ambient temperature (max.): 35 °C, ambient temperature (min.): 13 °C, temperature: 20 °C, pressure: 4 bar, 3D CNC measuring machine of the compact class. It fits in any office, as it has an installation height of 3.38 m. Innovative H3CT Hexagon controller with FDC protocol. New PC-DMIS CAD version 2025.1. Hnjdpfx Ahjw Dqpdj Neg 6-position probe changer, 3 modules, automatic rotary/swivel head with 5-degree increments. New NJB jogbox. The photos say it all. Runs like new and has been inspected by us.

Condition: excellent (used), Measuring range X-Y-Z 600 x 600 x 250 mm Table size 697 x 758 mm MARCELS MASCHINEN AG Hsdpjxpug Iefx Ah Njng

Year of construction: 2019, condition: excellent (used), image guided 3D coordinate measuring machine Manufacturer: Keyence Type: XM-1200 Series Year of manufacture: 2019 Control: Keyence Technical Data: ----- - Camera chip: 4 MP CMOS - Measuring range: 600 x 300 x 200 mm Hodpsih R Uxofx Ah Nong - Smallest display unit: 1 µm - Smallest angle: 0.0001 - Repeatability (locked): ±3 µm - Max. table load: 25 kg - Display: 15" TFT - Weight: 40 Kg Accessories: ----- - manuals - analog delivery condition (data sheet attached)

Condition: like new (used), Year of construction: 2024, Equipment: type plate available, The device is less than one year old. Sale is from the current location, transportation must be arranged by the buyer. Sale excludes any form of warranty and is only to commercial buyers. The purchasing company must sign a purchase contract and provide proof of its beneficial owners; the authorized signatory must complete Postident verification. Hodpexckv Sofx Ah Neng

Condition: excellent (used), Year of construction: 2012, Werth Scope-Check 300x200x200 3D CNC coordinate measuring machine TECHNICAL DATA Hjdpfxsvffcpo Ah Nong Measuring capacity (X x Y x Z): 300 x 200 x 200 mm Work table, load capacity: 20 kg Magnification: X5 Resolution: 0.5 micron Weight: Approx. 300 kg No responsibility is taken for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 2003, Technical Data Manufacturer: Zeiss Model: Carmet Year of manufacture: 2003 2 measuring arms Measuring plate Mounted grid plate Width: 3,100 mm Depth: 2,000 mm Accessories PC unit (FTSD0026) Joystick control 2 x 24" monitors, make Eizo Keyboard Mouse Hnodpfoxnru Hjx Ah Nsg Price: on request! Note: Our offer is intended exclusively for professional clients. (Subject to change and errors in technical data, specifications and pricing, as well as prior sale!)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 980 kg, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Hnjdpfxju E U Hbe Ah Nsg Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle The Z-axis support column is made of silicon carbide, which increases rigidity. DC servo motors, air bearings on all axes, free-floating linear scales with 0.1 µm resolution.

Year of construction: 2010, condition: excellent (used), Werth Scope Check 400 multi-sensor coordinate measuring machine Year of manufacture: 2010 X-axis: 400 mm Y-axis: 200 mm Hedsnk U E Aspfx Ah Njng Z-axis: 200 mm Max. Measuring piece weight: 20 kg Max. Measuring piece height: 200 mm No responsibility is taken for the correctness, completeness and topicality of the information.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 149616, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 2,500 mm, Equipment: type plate available, Technical Data Manufacturer: Zeiss Model: Pro T Compact S/N: 149616 Year of manufacture: 2008 2 measuring arms Measuring table Width: 3,000 mm Depth: 6,000 mm Travel ranges Y-axis: 1,600 mm Z-axis: 2,500 mm Hodpfxoxnrumo Ah Nsng Equipment 2 x control PCs (FTSD0026; FTSD0029) 4 x 24" monitors, make Eizo 2 x keyboard 2 x mouse Misc. accessories Price: on request! Note: Our offer is directed exclusively at professional customers. (Modifications and errors in the technical data, information and prices as well as prior sale remain reserved!)

Condition: good (used), Year of construction: 2010, 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC TECHNICAL DATA Manufacturer: Werth Model: Video-Check-IP 400×200 3D CNC Function: 3D Coordinate Measuring Machine Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 250 mm Max. workpiece weight: 30 kg Drives: Ball screw drives with servo motors Measuring systems: Incremental scales with 0.1 µm resolution Guides: Precision ball guides on all axes Illumination: Transmitted light, bright field and dark field reflected light with LED Optics: Zoom optics with zoom factor 0.2x–100x Camera: High-resolution CCD black-and-white camera Electrical connection: 230 V AC, 50 Hz Current consumption: max. 10 A Hnsdpfx Ahjxfluue Njg Power: max. 1.5 kVA Noise level: < 70 dB(A) SCOPE OF DELIVERY Including (not limited to): 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC Control panel Probes Fiber optic and reference standard sets Exact scope of delivery according to photo documentation The Werth Video-Check-IP 400×200 3D CNC is a high-precision coordinate measuring machine for optical and tactile metrology. With a measuring range of 400 x 200 x 250 mm, it offers versatile application options for quality assurance of a wide variety of components. The combination of high-resolution CCD black-and-white camera, powerful zoom optics and LED lighting ensures precise image capture and reliable results. Precision ball guides and servo drives guarantee high repeatability. The device comes with extensive accessories and is ideally suited for precise 3D measuring tasks in industrial and manufacturing environments. No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 158750, measuring range X-axis: 5,000 mm, measuring range Y-axis: 2,600 mm, measuring range Z-axis: 2,100 mm, Technical Data Manufacturer: Zeiss Model: Carmet II Duplex Serial No.: 158750; 157854 Year of manufacture: 2012 2 measuring arms Measuring plate Centrally installed grid/adapter plate Width: 2,600 mm Depth: 4,800 mm Platform installation Measuring range X-axis: 5,000 mm Y-axis: 2,600 mm Z-axis: 2,100 mm Hnsdsxnrugepfx Ah Nog Accessories 2 control PCs (FTSD0026; FTSD0029) 4 x 24" monitors, make Eizo 2 keyboards 2 mice Price: on request! Note: Our offer is addressed exclusively to professional customers. (Subject to changes and errors in technical data, information and pricing as well as prior sale!)

Condition: good (used), Year of construction: 2010, Technical Specifications Manufacturer: Werth Messtechnik GmbH Hnjdpfx Aexfly Deh Neg Model: Video-Check 800x400x200 3D Year of manufacture: 2010 Measuring range: 800x400x200 mm Control system: Operator console with joystick and function buttons Voltage: 230 V AC Frequency: 50 Hz Current consumption: max. 10 A Camera: High-resolution video technology Probes: Renishaw measuring probe Multi-sensor technology: Combined optical and tactile measurement Construction: Solid granite base SCOPE OF DELIVERY Includes, among others (list not exhaustive): • 3D measuring machine Werth Video-Check 800x400x200 • Operator console with joystick and function buttons • Probes Exact scope of delivery as per photo documentation The Werth Video-Check 800x400x200 is a high-precision 3D measuring machine for versatile applications in quality assurance. With its large measuring range of 800x400x200 mm, it is suitable for small to medium-sized components. The machine features multi-sensor technology that allows both optical and tactile measurements, offering maximum flexibility. The robust granite construction ensures the highest measurement accuracy and long-term stability. Thanks to the Renishaw probe, video camera, and convenient control via operator console, complex measuring tasks can be performed efficiently and reliably. No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: used, Year of construction: 2007, machine/vehicle number: 134418, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Equipment: type plate available, Technical Data Manufacturer: Zeiss Type: Accura 12/18/10 S/N: 13418 Year of manufacture: 2007 Measuring Plate Hard stone measuring plate Width: 2,400 mm Depth: 1,700 mm Height: 400 mm Measuring Range X-axis: 1,200 mm Y-axis: 1,800 mm Z-axis: 1,000 mm Accessories Control panel PC unit 2 x 27" monitors, brand BenQ Keyboard Mouse Accessories Stored in a two-door metal cabinet Hedpfx Ahexnruas Nong Price: on request! Note: Our offer is aimed exclusively at professional customers. (Subject to change and error in technical data, details and prices as well as prior sale!)