Used Mchale F 550 for sale (9,499)

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Bedpfowxtcpjx Acysdi Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: refurbished (used), Year of construction: 2019, S&F Oscillating Screen | Screening Machine Type ASM-200 reconditioned | refurbished with new bearings and tested universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2019 Screening capacity: approx. 25 - 30 m³/h (for wood chips, depending on material) Bsdpfxjw Sppqe Acyodi Fractions: 3 Screening area: 2.0 m² per screen mesh size Screening decks: 2 pieces Mesh size of the screen: - 1st screening deck: punched perforated plate screen, D = 40 mm - 2nd screening deck: punched perforated plate screen, D = 5 mm Drive power: 2.0 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 6011 Reseda green Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: ready for operation (used), Year of construction: 2001, With documentation, an inspection is possible. Bdedsf Ddrlspfx Acyji

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Bodpow Au H Rjfx Acyodi Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Condition: new, ➡️ BUSCH R5 VACUUM PUMP ➡️ RA 0040 F 503 ➡️ NEW ➡️ Bdedpfx Acjwdkl Eoyoi

Condition: used, Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: F-Tron -Type: 2498219.1 -Art. No .: 881-01026 -Number: 1x control cards available -Price: per piece Bedpfx Aecugp Uecyodi -Dimensions: 270/220/H45 mm -Weight: 1.4 kg

Condition: used, Year of construction: 2017, Overview The semi-automatic KEG filler was built in 2017 by the German company m+f KEG-Technik and fills 50-60 KEGs/ h into various containers. It is still in operation and can be inspected.  Technical data Capacity: 50-60 KEG/h Formats: 20l, 30l  Containers: KeyKeg, Dolium-KEG, PETainer, KEG  Filling head made of stainless steel  Pressure control by pressure switch (controls hot water and steam pressures for flushing the filling head) Sight glass for product feed line Dimensions (LxWxH): 1.150mm x 800mm x 2.150mm ±50 Control: Siemens S7  More pictures, videos and technical documentation available on request Bodpfel Hx Nrex Acyjdi

Condition: as good as new (ex-display), Year of construction: 2025, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Bdedpfx Acow I R Rnoyei Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Year of construction: 2021, condition: ready for operation (used), There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible. Bedpom Nckfjfx Acyjdi

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Bdedjwywcispfx Acyji Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: MA / 03 - 718, PRODUCTION LINE FOR THE PRODUCTION OF 330 X 330 MM ¼ AND 330 X 420 MM 1/6 FOLD NAPKINS PRICE: PRINTING MACHINE Producer: S-d-f Model: Omega Plus 8/500 09/2004 Bedpfewnx N Hsx Acyedi Serial number: MA / 03 - 718 Production date: 2004 EQUIPMENT 1. Single shaftless unwinder for reels up to: 1500 mm with lift • intake for roll core R 76 mm • single motor drive with multi-V-belt • drive speed controlled by dancer • automatic machine stop at reel end • dust removal system 2. Calendering Unit • for equalizing the tissue thickness, reducing of dust, and improving the printing quality • single motor drive • hardened and ground cylinders • Web tension measuring roller for single drive control with mechanical stop 3.Web Aligner No. AND • BST web aligner positioned in front of printing station 4. Flexographic Printing Press • 2 printing tower frames for max eight (8) printing units • s-wrap pull rollers and guide roller • moveable operating platform for operating the printing units • touch panel operator • range format 330 mm 2 • single drive for each printing unit • motorized 360° radial register • angle synchronizer • quick-change device for plate cylinder (with spherical valves) • integrated quick-change device with air support for printing plate sleeves • automatic register pre-adjustment ('Make-Ready') • ceramic coated anilox roller • 2 sets mounting cylinders – for 330mm (Lunch) and 420mm (Buffet) napkins formats • ink level detector with acoustic or visual alarm • lifting and dropping of ink trays • protection covers, safety switches 5. Web Inspection Device Type BST 6. Infrared Drying Equipment • two drying infra-red cassettes • drying cassettes separately adjustable • cassette cooling by integrated fans (with temperature control) • automatic shut-off and lifting upon printand machine stop 7. BST Web Aligner No. II for embossing 8. Double embossing station • two-position embossing station • two sets rollers for embosiing – Formats: Lunch 330x330mm, Buffet 330x420mm) 9. Folding frame 10. ¼ Folding Head 11. Manual product transfer to the packaging machine. 12. Electrical Equipment TECHNICAL DATA Max printing speed: 300m/min Real speed printing: 230m/min Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Control – Siemens S7 Max Power: 93 KW 3 PACKING MACHINE Producer: Senning Model: 522 SE/M Serial number: 71,660 Production date: 2004 Formats: • Lunch 330 x330 mm ¼ folded • Buffet 420 x 330 mm 1/6 folded • minimum package height 18mm • maximum package height 40 mm. TECHNICAL DATA Maximum packing speed: 60 packs/min Standard packing speed: 40 packs/min Foil material: • Polyethylene (PE) – 35-40um • Polypropylene (OPP) – 22-28um • Polypropylene (PP) 35-40 um. • Core from foil diameter – 76 mms ELECTRICAL DATA Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Max power: 20 KW.

Condition: used, Tool holder, milling holder, milling tool, cutter head, milling arbor -Manufacturer: W&F, milling adapters SK50 18 pieces -9 pieces: Drm. 16 x 100 mm -2 pieces: Drm. 20 x 100 mm -3 pieces: WE 14x120 Z -1 piece: WE 14x160 Z -1 piece: Drm. 12 x 120 mm -1 piece: Drm. 18 x 160 mm -1 piece: Drm. 18 x 160 mm -Various types: see photos, more pictures can be sent -Price / fee: complete Bjdpfjhd Rqxsx Acysdi -Dimensions: 600/400 / H220 mm -Weight: 69.1 kg

Condition: new, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Bodpjw Ad Rrjfx Acyodi Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: ready for operation (used), Year of construction: 1993, A wrap-around tray packaging machine A+F for cheese packages is available. Nominal output: 10kW, PLC system: Siemens 115 U. Documentation available. On-site inspection is possible. Bdedswynvaepfx Acyei

Condition: excellent (used), Year of construction: 2013, First commissioned: 2013 Control: Heidenhain iTNC 530 including HR 520 handwheel Machine hours Machine under power: approx. 40,700 h Spindle hours: approx. 17,100 h Spindle hours of current milling spindle: approx. 150 h X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Working table Clamping area: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives X/Y/Z axis feed rate: up to 60 m/min X/Y/Z axis acceleration: up to 5 m/s² The machine is currently set to the following default values because there was insufficient power available on site! X/Y axis feed rate: up to 40 m/min Z axis feed rate: up to 30 m/min X/Y/Z axis acceleration: up to 2.5 m/s² Connection data Connected load: 190 kVa Back-up fuse: approx. 315 A The machine can be reset to its original values at any time if sufficient power is available. The following reduced connection values apply: Connected load: 130 kVA Back-up fuse: approx. 250 A Dimensions, weight Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Color Enclosure, gantry, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 fluorescent green Description: Additional equipment - Coolant supply with belt filter system Bdodewa T Hkopfx Acyei - 50-station chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system from LTA Optional for an additional charge: - Renishaw RMP60 wireless touch probe - BLUM Control NT Condition of the machine Fully functional, in very good condition. Already disassembled and stored.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 01 - 346, year of last overhaul: 2025, PRODUCTION LINE FOR THE PRODUCTION OF 330 X 330 MM AND 250 X 250 MM ¼ FOLD NAPKINS 1. Single shaftless unwinder for reels up to: 1500 mm with lift • intake for roll core R 70 or 76 mm • max roll weight 350 kg • single motor drive with multi-V-belt • drive speed controlled by dancer • automatic machine stop at reel end • dust removal system 2. Calendering Unit • for equalizing the tissue thickness, reducing of dust, and improving the printing quality - Ø 254 mm • single motor drive • hardened and ground cylinders • Web tension measuring roller for single drive control with mechanical stop 3. Web Aligner No. AND • BST web aligner positioned in front of printing station 4. Flexographic Printing Press • 2 printing tower frames for max eight (8) printing units • s-wrap pull rollers and guide roller • moveable operating platform for operating the printing units • push-button operator panel • maximum format range 500 mm 2 • single drive for each printing unit • motorized 360° radial register • angle synchronizer • quick-change device for plate cylinder. • integrated quick-change device with air support for printing plate sleeves • ceramic coated anilox roller • 2 sets mounting cylinders – for 330mm (Lunch) and 500 mm (cocktail) napkins formats • ink level detector with acoustic or visual alarm • lifting and dropping of ink trays • protection covers, safety switches 5. Web Inspection Device Type BST with S-VGA Monitor 6.Infrared Drying Equipment • two drying infra-red cassettes • drying cassettes separately adjustable • cassette cooling by integrated fans (with temperature control) • automatic shut-off and lifting upon print end machine stop 7. BST Web Aligner No. II for embossing 8. Double embossing station • two-position embossing station • two sets rollers for embosiing – Formats: Lunch 330x330mm, cocktail 250x250mm 9. Folding frame 10. ¼ Folding Head 11. Manual product transfer to the packaging machine. 12. Electrical Equipment Bdodpfx Acewnxgljysi TECHNICAL DATA Max printing speed: 300m/min Real speed printing: 200 – 230 m/min Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Control – Siemens S7 Max Power 93 KW. 3 PACKING MACHINE Producer: Senning Model: 522 SE/M-30 Serial number: 71,155 Production date: 2002 Formats: • Lunch 330 x330 mm ¼ folded • cocktail 250 x 250 mm 1/4 folded • minimum package height 18mm • maximum package height 40 mm. TECHNICAL DATA Maximum packing speed: 30 packs/min Standard packing speed: 30 packs/min Foil material: • Polyethylene (PE) – 35-40um • Polypropylene (OPP) – 22-28um • Polypropylene (PP) 35-40 um. • Core from foil diameter – 76 mm ELECTRICAL DATA Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Max power 20 KW.

Condition: new, Year of construction: 2025, Drum chipper series ATH 220 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm Bjdpfx Aswbv Erjcyjdi - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Bdsdpfxovy A Tne Acyoi Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Condition: new, Year of construction: 2025, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content Bdodpfxjuz Hmxj Acysi - Low maintenance - Flexible use - Customised production

Condition: excellent (used), Year of construction: 2013, First commissioned: 2013 Control: Heidenhain iTNC 530 including handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Bsdpfxovy A Tbs Acyjdi Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH20 Spindle power: 45 kW Spindle speed: max. 25,000 min-1 Torque: 67 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y, Z axes: up to 60 m/min Axis acceleration X, Y, Z axis: up to 5 m/s2 Connection data Connection power: 180 kVa Pre-fuse: approx. 290 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Description: Additional equipment - Coolant supply with belt filter system - 50-way chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system from LTA Optional for an additional charge: - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Condition of the Machine Fully functional, very good condition. Already dismantled and stored.

Year of construction: 2025, condition: new, Oscillating screen ASM series S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity Bdedpfx Acsin Ey Seyoi - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: refurbished (used), Dear customers, currently we offer you deflection rollers as well as drive rollers for profile belt sanding machines of the brand F. Zimmermann. The rollers were newly coated, with a more robust material for better durability, then crowned sanded and newly stored. The rolls fit the following machine types:Zimmermann PS0, year of manufacture independentZimmermann PS1, year of manufacture independentZimmermann PS1/2, year of manufacture independentZimmermann PS S, year of manufacture independentWhen ordering, please always specify the machine type and which rolls you require and in what quantity. We have everything in stock and can deliver at short notice, if you have any further questions please do not hesitate to contact me! Bdsdpfed S Eb Asx Acyoi

Year of construction: 2025, condition: new, Screening plant for loading wood pellets, stationary Bdedpoinkw Ajfx Acysi New production Screening capacity: 10 - 50 t/h (depending on design) consisting of: - Modul-Silo type M-300 (45 °) - Oscillating screen type ASM - Conveyor belt type MFB incl. magnetic separator - Veralde set // MODULFLEX loader - Pipe screw conveyor (option) - Dust extractor (option) Functional description and mode of operation: The pellets are fed into the modular silo by means of a wheel loader. The pellets then pass through the ASM oscillating screen. The screen separates the pellets into two size classes (pellets and dust). The screened pellets are loaded into the silo vehicle by means of a conveyor belt and loading equipment. Thanks to the integrated level indicator in the loading set, the system switches off automatically when the silo vehicle is sufficiently full. The dust fractions are discharged by means of a screw conveyor. To minimise the dust load, it is possible to equip the screening plant with an additional dust extractor type NE. The capacity of the screening plant (depending on the design) is between 10 - 50 t/h (70 m³/h) for wood pellets. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you. We look forward to your feedback!

Year of construction: 2025, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Bodpfxjin Ewlj Acyodi Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Year of construction: 2025, condition: new, Screening plant for loading wood pellets, semi-mobile New production Screening capacity: 10 - 50 t/h (depending on design) consisting of: - Trough belt conveyor type TFB - Screening machine type ASM - Troughed belt conveyor type MFB incl. magnetic separator - Veralde set // MODULFLEX loader - Pipe screw conveyor (option) - Dust extractor (option) Functional description and mode of operation: The pellets are fed into the trough belt conveyor (incl. bunker attachment) by means of a wheel loader. The pellets then reach the oscillating screen type ASM. The screening machine separates the pellets into two size classes (pellets and dust). The screened pellets are loaded into the silo vehicle by means of a trough conveyor belt and loading equipment. Thanks to the integrated level indicator in the loading set, the system switches off automatically when the silo vehicle is sufficiently full. The dust fractions are discharged by means of a screw conveyor. To minimise the dust load, it is possible to equip the screening plant with an additional dust extractor type NE. The capacity of the screening plant (depending on the design) is between 10 - 50 t/h (70 m³/h) for wood pellets. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance Bedpfxsiux Tfs Acyjdi - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.