Used Mazak Integrex 200 Sy for sale (363)

Condition: used, YOM 2004 Mazatrol PC Fusion 640 M Axis X 1660 mm Axis Y 510 mm Axis Z 510 mm Table length 2000 mm Table width 510 mm Max. part weight 1000 kg Number of tool pockets 30 Djdpfxev Ax Uyj Afkjup Spindle taper CAT 40 Max. spindle speed 10000 rpm Spindle motor power 18.5 kW

Condition: used, Year of construction: 2008, Mazak QTN-100MSY Year: 2008 X/Y/Z/B: 185/100/455/460 mm Max. turning diameter: 280 mm Bar capacity up to 51 mm diameter Main spindle Speed range: 6000 rpm Main drive power: 11 kW Duedpfx Ajxn Svdjfkop Max. torque: 184 Nm Spindle bore diameter: 61 mm C-axis spindle positioning: 0.001° Second spindle Speed range: 6000 rpm Drive power: 11 kW Max. torque: 89 Nm Indexing: 0.001° Tool turret Number of tool stations: 12 Driven tools Speed range: 4500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel paths X-axis: 185 mm Y-axis: 100 (+/- 50) mm Z-axis: 455 mm W-axis: 460 mm Toolsetter Parts catcher Chip conveyor, right side Coolant pump Barfeeder interface

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 265864, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, feed rate X-axis: 30 m/min, feed rate Z-axis: 33 m/min, torque: 233 Nm, distance table center to spindle nose: 687 mm, Equipment: documentation/manual, Mazatrol Smart Control. Spindle speed 5000 rpm. X/Z travel 195mm/560mm. Dsdpfx Afovfm H Aekeup Fitted with 215mm diameter. 3 jaw-powered chuck 12-station turret. Tailstock. Tool setter. Part catcher.

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 26 KW 22 KW Max. Torque 465 Nm turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed Dujdpfx Afetugggjkep - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Condition: good (used), Year of construction: 2001, Data will follow.... Dodpjx Tgznjfx Afksup

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, empty load weight: 8,400 kg, Submission of a bid obligates timely collection in calendar week 1 or 2 of 2026! Lathe with gantry loading! Duedpfx Afjxzubpskjp MACHINE DETAILS Weight: 8,400 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning diameter: 380 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, bar passage: 77 mm, CNC Lathe with Loading and Unloading Robot and Chip Conveyor! TECHNICAL DETAILS Travel X-axis: 230 mm Travel Y-axis: 100 mm Travel Z-axis: 575 mm Maximum machining diameter: 380 mm Maximum cross slide swing diameter: 675 mm Maximum distance between spindles: 541 mm Maximum bar capacity: 77 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 21 m/min Rapid traverse Z-axis: 33 m/min Main Spindle Dujdpfx Aoxxl S Tefksp Speed: 4,000 rpm Motor (100% / 30 min): 22 / 26 kW Spindle bore: 88 mm Sub Spindle Speed: 6,000 rpm Motor (25% duty cycle): 7.5 kW Travel: 585 mm Tool Turret with Live Tools Number of stations: 12 Maximum speed: 4,500 rpm Motor: 5.5 kW Tool shank height: 25 mm Tool shank diameter: 40 mm MACHINE DETAILS Operating hours: approx. 66,000 h DIMENSIONS & WEIGHT Installation area (L x W x H): 285 x 187 x 187 cm Machine weight: 5,400 kg EQUIPMENT Mitsubishi RV-12SL-S12 loading and unloading robot Interface for bar feeder Automatic parts catcher Automatic door High-pressure cooling, 5 bar Chip conveyor

Condition: excellent (used), Year of construction: 2022, For sale I offer a Mazak QT-COMPACT 300MSY L CNC lathe from 2022. The machine is in perfect technical and visual condition, used occasionally, fully functional, ready to work immediately. Specification: - Year of production: 2022 - Model: Mazak QT-COMPACT 300MSY L - Control: MAZATROL SmoothG - Y axis and main and counter spindle - Spindle passage: 80 mm - Bar passage: 65 mm - Tool turret with Y axis (12 positions) - Max. turning diameter: 380 mm - Max. turning length: 600 mm Dujdpfx Afev T Tiyekep - Cooling through the spindle (CTS) - Bar feeder - Well-maintained, used in industrial conditions, regularly serviced. Possibility of issuing a VAT invoice. The machine can be viewed on site by appointment. We help with loading and organizing transport. If you have any questions, please contact us by phone or via OLX message.

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 153493, functionality: fully functional, operating hours: 29,189 h, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS X-axis travel: 1,660 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Dusdpfx Ajwixtbsfkjp Control: Mazatrol 640M Rapid traverse: 30,000 mm/min Feed rate: 8,000 mm/min Spindle Spindle mount: 7/24 taper, No. 40 Speed range: 40 - 10,000 rpm Power (continuous operation/30 min/10 min): 7.5 / 11 / 15 kW Table Table area (right/left): 2,000 mm Table area (forward/backward): 510 mm Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot spacing: 100 mm Max. table load: 1,000 kg Distance spindle to table: 180 - 690 mm Spindle center to column: 530 mm Table height: 750 mm MACHINE DETAILS Weight: 9.1 t EQUIPMENT - Spindle cooling

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 240 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 495 mm, bar diameter (max.): 51 mm, TECHNICAL DETAILS Machining diameter: 320 mm Turning diameter over slide: 320 mm Machining length (chuck workpiece): 180 mm Bar capacity: 51 mm Travels and feeds X-axis travel: 240 mm Y-axis travel: 100 mm Z-axis travel: 495 mm X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 10 m/min Z-axis rapid traverse: 33 m/min Dujdowi Na Sopfx Afkop Spindles Number of headstocks: 2 Main spindle speed: 5,000 rpm Main spindle motor power (30 min / 100%): 22 / 15 kW C-axis resolution: 0.001° Spindle bore: 61 mm Counter spindle speed: 5,000 rpm Counter spindle motor power (30 min / 100%): 22 / 15 kW C-axis resolution: 0.001° Tool turret Number of tool positions: 2 x 16 Tool shank height: 25 mm Boring bar shank diameter: 40 mm Turret: with driven tools Driven tools Speed: 4,500 rpm Drive power: 3.7 kW MACHINE DETAILS Spindle chuck: Kitagawa B-208 (210 mm) Control: Mazatrol 640T Machine weight: 8,400 kg EQUIPMENT - 2 x 16-station tool turrets - CNC option package EIA / ISO programming - Air purge device on the chuck - Flex GL 150F gantry loader with pallet conveyor - Tool-Eye - Partition wall - High-pressure cooling 70 bar - Chip conveyor Mayfran ConSep 2000 II

Condition: excellent (used), Year of construction: 2007, operating hours: 2,770 h, machine/vehicle number: 199581, Mazak Vertical Centre Nexus 510C-II (2007) 4th axis Serial number: 199581 Low working hours: 2770 Matrix Nexus control Kitagawa 4th axis EIA/Mazatrol Control Mazatrol tool length measuring system Through coolant CAT40 tooling Djdpfev D E Iijx Afkjup 12,000 rpm main spindle Full set of manuals This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: used, machine/vehicle number: 33548, turning diameter over bed:533 mm turning diameter over slide rest:340 mm turning length:2000 mm centre height:270 mm turning diameter in the gap:720 mm spindle bore:80 mm :12 turning speed range:25 - 1500 U/min feeds::76 travel of compound slide-rest:110 mm Duodpfx Afscxxucjksp spindle travel:360 mm taper MK:4 bed width:370 mm weight of the machine ca.:2,87 t dimensions of the machine ca.:4,1 x 0,95 m

Condition: used, Year of construction: 2007, Main data Dedpeygipgjfx Afkoup - X travel (table longitudinal travel): 1050 mm - Y travel (table transverse travel): 530 mm - Z travel (spindle vertical travel): 510 mm Spindle - Spindle motor: AC 18.5 kW (5 min rating) - Rapid traverse X / Y / Z: 36 / 36 / 36 m/min - Tool magazine: 30 stations - Spindle taper: ISO 40 - Spindle bearings: Ø 70 / 110 mm - Speed range: 12,000 rpm - Number of speed ranges: Direct drive - Max torque: 95.5 Nm X-axis - X travel (table longitudinal travel): 1050 mm - Guides: Linear ball guides Y-axis - Y travel (table transverse travel): 530 mm - Rapid feed: 36 m/min - Working feed rate: 1 – 36,000 mm/min - Guides: Linear ball guides Z-axis - Z travel (spindle vertical travel): 510 mm - Spindle nose to table top distance: 150 – 660 mm - Distance from column to spindle center: 576 mm

Condition: used, Year of construction: 2005, Mazak VC Nexus 510C Mazatrol 640M Nexus Year of manufacture: 2005 Table: 1300 x 550 mm X: 1050 mm Y: 510 mm Dsdpfx Aexqltzjfksup Z: 510 mm 12,000 RPM/18.5 kW spindle: ISO-40 ATC: 30 positions tool measure, CTS 15 bar Performance CNC optional package YOM: 2005 Table: 1300 x 550 mm Y: 510 mm X: 1050 mm Spindle: ISO-40 Z: 510 mm ATC: 30 positions

Condition: used, Year of construction: 2004, Mazak Multiplex 6300 Mazatrol 640T YOM: 2004-11 approximately 20 pcs tools Duedpjv Tvkaefx Afkop Mazak Flex-GL200F More information is coming soon.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640 Nexus, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 410 mm Travel Z-axis: 510 mm Table dimensions: 900 mm x 410 mm Spindle speed: 12,000 rpm Tool holder: SK40 Number of stations in tool changer: 30 Djdpfxeymzmkj Afksup Internal coolant supply: 15 bar MACHINE DETAILS Control: Mazatrol 640 Nexus Machine weight: 5,010 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, table load: 1,200 kg, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis: 1,660 mm Y-axis: 760 mm Z-axis: 660 mm Table size: 760 x 2,000 mm Max. table load: 1,200 kg Tool holder: SK 40 Tool changer: 2 x 24 Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket free: 110 mm Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min Dedpfsymw Nhex Afkeup MACHINE DETAILS Control: MAZATROL M-PLUS Dimensions & Weight Required space: approx. 6.0 x 4.0 x 3.5 m Machine weight: approx. 8.1 t Total power requirement: 32.8 kVA The machine has been serviced regularly.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 25,769 h, machine/vehicle number: 159687, laser power: 2,500 W, travel distance X-axis: 3,335 mm, travel distance Y-axis: 1,545 mm, travel distance Z-axis: 420 mm, swivel angle A-axis (max.): 360 °, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 3335 mm Travel Y-axis: 1545 mm Travel Z-axis: 420 mm A-axis: ±360 ° B-axis: ±135 ° Maximum workpiece dimensions: 3050 x 1525 x 22 mm Maximum table load: 810 kgf MACHINE DETAILS Laser power: 2500 W Laser model: YB-L250A8M NC control: Mazak & Fanuc L-64 Dimensions & Weight Machine dimensions: 7,525 x 2,875 x 2,300 mm Chiller dimensions: 920 x 1,600 x 1,780 mm Extraction unit dimensions: 850 x 850 x 930 mm Machine weight: 14.6 t Operating hours: 25,769 h EQUIPMENT Chiller Extraction unit Dujdpeymfmbefx Afkjp

Condition: ready for operation (used), Year of construction: 2006, operating hours: 45,559 h, functionality: fully functional, machine/vehicle number: 183519, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, overall weight: 11,350 kg, TECHNICAL DETAILS Worktable: Pallet size 500 x 500 mm Max. workpiece dimensions: 800 x 1,000 mm Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 740 mm Spindle diameter: 215 mm Feed rate: 1 – 60,000 mm/min Rapid traverse max.: 60 m/min Spindle speed range: 35 – 12,000 rpm Internal coolant supply: 70 bar MACHINE DETAILS Duodpfx Afsyn I Scskjp Control model: Mazatrol PC Fusion CNC 640M Operating hours: 45,559 h Machine weight: approx. 11,350 kg EQUIPMENT Renishaw measuring probe Chip conveyor Tool magazine: 160 equipped positions + approx. 60 additional tools Palletech high-bay pallet system: 16 pallets + 2 loading stations

Condition: used, Year of construction: 2013, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix Nexus, workpiece weight (max.): 700 kg, total height: 2,814 mm, total length: 4,690 mm, total width: 2,330 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,000 kg, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre CNC Control Mazatrol Matrix Nexus Pallet table size 500 x 500 mm Number of pallets 2 Duodoytc Nmepfx Afkep Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Spindle taper CAT 40 Spindle speed 18.000 1/Min Spindle motor 30/22 kW Magazin capacity 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,355 mm, total length: 5,250 mm, total width: 3,573 mm, table length: 3,500 mm, table width: 820 mm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 35 rpm, table load: 2,500 kg, Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Table size 3500 x 820 mm Table load 2500 kg Dusdpfx Ajytb Tqofkep Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° B-axis travel ± 110° Spindle speed 35 - 18.000 R/min Spindle taper HSK-A63 Spindle motor 35-26 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, 1 unit CNC turning and milling center with two spindles and two turrets MAZAK MULTIPLEX 620 MARKII, including tool cabinet and various contents, 1x desk 110x70x87cm, 1x tool cabinet 50x50x110cm, 1x computer, 1x monitor, 1x keyboard, as per images and inspection, self-dismantling. Condition: used. Storage location: production hall / left. Payment method: advance bank transfer. Shipping: Collection only – shipping is not offered for this item! Duodsyr Ianspfx Afkop

Condition: used, 1 unit CNC turning center MAZAK SUPER QUICK TURN 15M MARKII. Max. turning diameter approx. 300 mm, max. turning length approx. 528 mm, spindle speed up to 5,000 rpm, 12-station turret. Travel paths: X-axis approx. 180 mm, Z-axis approx. 575 mm. Including tool cabinet and various accessories as per photos and inspection, self-dismantling. Dimensions (L/W/H): 70x55x105 cm. Condition: used. Location of goods: Production hall / left Payment method: Advance payment by bank transfer Dodoyr H Tyepfx Afksup Shipping: Collection only – No shipping offered for this item!

Condition: used, 1 unit CNC lathe MAZAK QUICK TURN 8NSP Max. turning diameter: 160mm, max. swing over bed: 300mm, spindle speed: 4,500 rpm, with various accessories and 2x material cabinets, as per photos and inspection, self-dismantling required Dimensions (L/W/H): 120x45x77cm Condition: used Storage location: production hall / right Dusdpeyr H Rxefx Afkop Payment method: advance payment by bank transfer Shipping: pickup only – shipping is not available for this item!

Condition: used, Year of construction: 1996, 1 pc. CNC turning center MAZAK SUPER QUICK TURN 15M MARKII with tool cabinet and various contents, as per photos and inspection, self-dismantling Year of manufacture: 1996 Dimensions (L/W/H): 70x55x105 cm Condition: used Duedpfxjyr H Dlo Afkjp Storage location: Production hall / left Payment method: Advance payment by bank transfer Shipping: Collection only – shipping is not offered for this item!