Used Manual Edm Machine for sale (71,618)

Condition: used, Year of construction: 2019, Wire EDM Machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS - Optical Drive System Tubular direct drives on X and Y axes Linear scales on X and Y axes Kedpsxpfy Sefx Akxodk Intelligent AT - Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic fine hole detection function 5 controlled axes – prepared for expansion PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler ä16426

Condition: good (used), Year of construction: 1991, machine/vehicle number: 18402, Offer 26114 Technical Data: Ksdoy D Rxrepfx Akxsdk - Bending operation is performed manually, assisted by counterweight - Clamping of the upper beam via side eccentric lever and foot pedal - Max. working width: 2040 mm - Max. material thickness St 40: 1.00 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of upper beam: approx. 70 mm - Max. adjustability of bending beam: 10 mm - Space requirement: approx. W 2800 x H 1200 x D 900 mm - Weight: approx. 520 kg - Various bending rails as depicted

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Kodpfx Aksyzw I Ijxedk Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 250 rpm, spindle speed (max.): 2,500 rpm, total height: 1,600 mm, total width: 1,200 mm, total length: 1,450 mm, lifting speed: 130 mm/s, hone diameter: 50 mm, overall weight: 830 kg, stroke length: 160 mm, power: 0.75 kW (1.02 HP), This easy-to-use manual honing machine is characterized by high stability and precision, and can be adjusted via stepless electronic speed control. The honing diameter ranges from 3mm to 50mm, with lengths up to 160mm. Easy to operate and simple to adjust. Due to its compact footprint, it is highly flexible in terms of placement. Kedew Upzxspfx Akxodk

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 1,700 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 400 mm, table width: 380 mm, overall weight: 1,150 kg, table length: 650 mm, empty load weight: 1,150 kg, warranty duration: 12 months, input voltage: 400 V, The EDM32 wire electrical discharge machine is a precision device designed for electro-erosion machining of electrically conductive materials. It is ideal for the production of tools, molds, and components requiring high accuracy and surface quality. The machine enables efficient cutting of complex shapes in both single-piece and serial production. Thanks to its stable construction and well-optimized operating parameters, the EDM32 ensures high productivity and repeatability of the machining process. The device allows cutting at angles up to ±6°, increasing its technological versatility. The use of wire with a diameter of 0.12 to 0.25 mm enables precise machining of even highly demanding components. The machine provides good surface finish quality at the level of 1.6–2.5 Ra, reducing the need for additional processing. High cutting efficiency and stable wire speed ensure optimal performance. The robust construction and maximum table load of up to 400 kg allow machining of heavier workpieces without loss of accuracy. Kdjdpfx Aoy A N Ezekxok Technical data Table travel: 440 × 350 mm Table size: 380 × 650 mm Max cutting height: 400 mm Wire diameter: 0.12 – 0.25 mm Taper cutting: ±6° Max cutting efficiency: 120 – 150 mm²/min Surface roughness: 1.6 – 2.5 Ra Machining power: 2 kW Wire speed: 11 m/s Max table load: 400 kg Weight: 1150 kg Machine dimensions: 1650 × 1150 × 1700 mm Applications Mold and die production Toolmaking industry Precision metal machining Production of complex geometry parts

Year of construction: 2014, condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 600 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 500 mm MAX ELECTRODE WEIGHT: 50 Kg MAX  PIECE WEIGHT: 2000 Kg MAX PIECE SIZE: 1200 x 800 x 350 mm TANK SIZE: 1280 x 850 x 390 mm CONTROL UNIT: VISION 5 WEIGHT: 5500 Kg OVERALL DIMENSIONS: 1800 x 2900 x 3200 mm ACCESSORIES: C-AXIS Kodpfx Akoyy Th Isxodk NOTE: POSSIBILITA' DI AGGIUNTA MAGAZZINO CAMBIO ELETTRODI.

Condition: used, Travel: 260x160x180mm Work-place: 600x900mm Complete with belongings Ksdpox Igc Usfx Akxjdk - Documentation available: Yes - CE certificate present: No - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2001, Travel X / Y / Z: 220 x 150 x 150 mm Z-axis device: standard equipment (= 5th axis) Kdodpfjg Icdyjx Akxjk Max. taper angle: 15° (for workpiece 100 mm thick) Taper machining unit: standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 - 0.25 mm dimensions L x W x H 1900 x 2345 x 2060 mm Weight 3500 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 18950 Std Verfahrwege X 350 mm Y 220 mm Kodjwzyvhepfx Akxsdk Z 220 mm U 350 mm V 220 mm Year 2005

Condition: good (used), Year of construction: 2003, In good technical condition and in working order. Year of construction 2003. X-axis 350 mm. Y-axis 250 mm. Z-axis 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Kjdsu Tq Hwjpfx Akxedk Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Machine weight approx. 2600 kg.

Year of construction: 2011, condition: good (used), Additional equipement not included. Kdsdpfxjpxnwzs Akxok

Condition: used, FANUC Robocut C 600 iA is a wire cutting EDM designed for precision, high accuracy and reliability. Working table 600×400 mm; max workpiece 1050×820×300 mm; table load 1000 kg; travels X600 Y400 Z310 U200 V200; wire from 0.1 mm. Power supply 50 Hz 3x 400 V; total power 11 kVA; machine weight ~1500 kg; overall 1800×1600×2000 mm. Accessories: lamp, automatic wire threading, Daikin cooling unit, automatic sliding door, glass rulers X,Y, rotating spindle Hirschmann F. Enables tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Kdedpfx Asyxprtekxek

Condition: excellent (used), Year of construction: 2017, travels: x 400 mm y 300 mm z 220 mm Kjdom Uyuxjpfx Akxodk Wear-free tubular direct drive Water bath incl. cooler Automatic wire threading

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Electrical Data: 400V; 21.5A Weight: 3500 kg Water Tank Size: 750 x 780 mm Kodpfjyxfqrox Akxsdk Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Width: 1320 mm Depth: 1460 mm Height: 1360 mm Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: ready for operation (used), Manual sheel metal bending machine MSW Type MSW-PBR-1270 Manual box and pan brake Operation: manual clamping system (hand operated) Heavy duty welded steel frame Specifications Max bending length 1250-1270 mm Kedpfx Akjyy Nxvjxsdk Max sheet thickness 1.5 mm (mild steel) 2.0 mm (aluminum/soft materials) Max clamping height, ca. 40-50 mm Bending angle (degrees) 0-155 Bending system: manual folding beam (lever operated) Clamping system: Hand lever activated upper beam Adjustable bending clearance for different sheet thicknesses Weight, ca. 300 kg

Condition: excellent (used), functionality: fully functional, We are offering a used System 3R-217-1 Marco Block here. The chuck is in very good condition and fully functional. Viewing by appointment possible. Shipping and viewing available! Ksdpfx Aksxphvcexedk

Condition: new, Year of construction: 2026, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Kjdpogculvsfx Akxsdk Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 400 mm Y-AXIS TRAVEL: 300 mm Kdjdsyvlxwepfx Akxsk MAX ELECTRODE WEIGHT: 100 Kg MAX  PIECE WEIGHT: 800 Kg MAX C-AXIS WEIGHT - STATIC/DYNAMIC: 50-10 Kg MAX PIECE SIZE: 220 x 400 x 220 mm TANK SIZE: 900 mm TABLE SIZE: 550 x 400 mm TOOL MAGAZINE: 5 POS CONTROL UNIT: TECHNO 60 WEIGHT: 3000 Kg

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total length: 1,050 mm, total width: 650 mm, workpiece height (max.): 250 mm, AGIECUT Excellence 3 eCut Year of manufacture: 2005 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Submerged tank machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Ksdpfsyu Iq Ejx Akxjdk Including AGIEJOGGER hand box for convenient machine setup Including AGIESETUP 3D AGIEVISION control system AGIE IPG generator with eCut technologies Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Optional services available on request: - Transport - Commissioning - Chiller unit - Clamping devices

Year of construction: 2007, condition: excellent (used), Makino SP 43 CNC control MGW-R Travels X: 450 mm Y: 300 mm Z: 320 mm Kdodpeiv H Dqsfx Akxek U/V axis: +/- 101 mm table: 730x580 mm tub: 890x850 mm max.workpiece weight: 900 kg dimensions approx: LxWxH 3000x3000x2300 mm weight approx: 3400 kg

Year of construction: 2000, condition: ready for operation (used), Cutting Erosion Machine MAKINO EU 64 X=600 mm Kjdpfogwp Eqsx Akxedk Y=400 mm Z=260 mm workpiece dimensions WxDxH max 940x650x260 mm Workpiece weight max 1500 kg Service due before commissioning !!! Current service report from Makino can be sent on request

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF Kodpfx Akoytkdrjxjdk X-AXIS TRAVEL: 750 mm Y-AXIS TRAVEL: 500 mm Z-AXIS TRAVEL: 410 mm U/V-AXIS TRAVEL: ± 100 mm RAPID FEEDS X-Y-Z: 1,3 m/min MAX  PIECE WEIGHT: 3000 Kg MAX PIECE SIZE: 1300 x 1000 x 405 mm TABLE SIZE: 1100 x 875 mm DRAFT ANGLE / DRAFT HEIGHT: ± 15 °; 360 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,20-0,36 mm CONTROL UNIT: MITSUBISHI 3D Advance WEIGHT: 5700 Kg OVERALL DIMENSIONS: 3495 x 3143 x 2633 mm NOTE: CNC Z AXIS; WIRE CRUSHER; LINEAR SCALES ON X and Y AXIS; 20 Kg REEL OF THREAD UNIT

Condition: like new (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Manual Lisec 2k sealing machine for Polisulfide, year 1998, will be competely overhauled prior delivery (will look and work as new). Until middle of March it's also possible to purchase as it is. After this the overhaul works will start. Currently the machine needs some professional cleaning as well as a pump service. Electrically the machine is 100% in function. Kdsdpfx Ajywdwnokxsk The overhauled machine will be available from end of April.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 80,000 h, machine/vehicle number: 571718, Ingersoll Gantry 800 solid electroerosion machine. Curve: (X,Y,Z,C) 550 / 850 / 450 mm , 360 degrees Machine dimensions: 2,4 x 2,65 x 2,68 m Axis resolution: 0.001 mm Dielectric tank stroke: 440 mm Number of electrodes in magazine: 20 Maximum electrode mass allowed: 15 kg Kdodpop Eclrsfx Akxek Multipulse generator: max 70A The machine is in working condition. If needed I can provide a video with it machining. I have the user and maintenance manuals, machine parameters and many accessories: EROWA device, electrode holder, tweezers. For more pictures, including a video, please contact me. The machine will come with a lot of accesories. Transport is not included in the price. The price is without VAT.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: manual, Maximum bending length: 2000 mm Maximum sheet thickness: 1.5 mm Segmented upper bending edge. Manual adjustment of the bending angle up to the stop. Bending: manually operated Kdjdpfx Akoyr Rcfexek Manually adjustable rear stop. Weight: 990 kg