Used Manual Band Saw for sale (21,537)

Condition: good (used), roll diameter 420 mm throat 405 mm workpiece height 380 mm cutting speed 16 - 2200 m/min table surface area 615 x 615 mm saw band length 3450/3650x6-20x0,9 mm work height max. 955 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 470 kg dimensions of the machine ca. 1250 x 1000 x 2100 mm From a training workshop Good condition (!!) Features: - Robust, vertical band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel Nledjxf Nahopfx Af Sog - IDEAL belt welding system, with shears and grinding motor - Swivel table 15°/45° - Machine base - Swiveling machine lamp

Condition: ready for operation (used), Year of construction: 1998, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: flat 230 x 200 mm capacity 60 degrees: round 175 mm capacity 60 degrees: flat 170 x 100 mm cutting speed 18 - 110 m/min vice max. 350 mm dimensions of saw-band 3370 x 27 x 0.9 mm engine output 1.5 / 1.8 kW weight of the machine ca. 880 kg range L-W-H 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 Nedpfx Aeyy A Hyjf Sslg . possible in automatic mode - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame * with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mm Equipment: Nljdpfx Aexaarkof Sog - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm Nedpoxaatbofx Af Sjlg capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: good (used), Year of construction: 2011, cutting diameter 290 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 240 x 150 mm capacity 45 degrees: round re 240 mm capacity 60 degrees: flat re 150 x 180 mm capacity 60 degrees: round re 150 mm capacity 45 degrees: flat li 240 x 100 mm capacity 45 degrees: round li 240 mm turning speed range: 20 - 100 m/min saw band length 3100 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 570 kg range L-W-H 1800 x 950 x 1550 mm Current list price: approx. 12.000 euros Special price upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron rotary table * For miter cuts from 45° left to 60° right - Hydraulic cutting feed Material clamping - Continuously variable band speed (Model "F") - Ergonomic control panel - Micro-spray lubrication system (spray oiler) - 2x PEGAS roller conveyor - Operating instructions in German * Semi-automatic work cycle: After the cycle starts, the vise closes automatically; Nodszv Ulwopfx Af Selg the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: round 120 mm vice 285 mm turning speed range: 36 / 72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 370 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable Nledpfxjxaa H Is Af Seg - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: ready for operation (used), Year of construction: 2018, cutting diameter 300 mm saw band length 3660 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: round 290 mm capacity 45 degrees: flat 260 x 280 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 180 x 170 mm coolant capacity ca. 100 l Control SPS total power requirement 2.4 kW AC weight 904 kg range L-W-H 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Njdpoy Uy S Aofx Af Selg Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) * Fully automatic with automatic material feed * Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit * 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Stepless adjustment of the mitre angle - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Stepless speed adjustment of the saw blade - Coolant device - Operating instructions for machine + control system * Special accessories included: - 1x PEGAS chip conveyor

Condition: excellent (used), Year of construction: 2017, cutting diameter 350 mm saw band length 4780 x 34 x 1.1 mm capacity 90 degrees: flat 500 x 340 mm capacity 45 degrees: round + 350 mm capacity 45 degrees: flat + 380 x 340 mm capacity 60 degrees: round 230 mm capacity 60 degrees: flat 220 x 340 mm capacity 45 degrees: round - 350 mm capacity 45 degrees: flat - 220 x 340 mm coolant capacity ca. 100 l band speed 20 - 100 m/min Control SIEMENS voltage 3x 400 V Nodpfxezqgf Ss Af Sjlg total power requirement 3.0 kW AC weight 2150 kg range L-W-H 3030 x 3150 x 2000 mm In very good condition Demo machine from the manufacturer PEGAS With a wide range of special features Original price about 60.000 euros Special price upon request - in checked conditions - machinevideo - ?v=dv_wXIT9BaQ Features: - Robust, highly efficient electro-hydraulic miter band saw * Fully automatic (INDUSTRIAL) = with automatic material feed * Model: Two-column band saw * Maximum stability and vibration damping during cutting * Powerful saw band drive with a 3.0 kW motor - Material feed unit with ball screws * "Longstep feed gripper" for a maximum feed length of 1.000 mm - Includes SIEMENS PLC control unit * Selectable semi-automatic or fully automatic cycle * 200 programs, each with 99 programmable cut lengths and quantities * When the remaining length is 500 mm, the machine interrupts the sawing cycle * Protection against damage or jamming of the material - For angles from 0° to 60°, with a ball-bearing rotary table * Programmable CNC adjustment of the miter angle * Right (0° to 60°) and left (0° to 45°) * Stepless adjustment of the miter angle * Adjustment via a robust gear train - Saw blade guides made of carbide plates - Saw feed infinitely adjustable via a fine-adjustment knob - Sturdy machine bed and torsion-resistant saw frame - Infinitely variable speed adjustment of the saw blade - Coolant system - Operating instructions for the machine and control system

Condition: good (used), Year of construction: 2016, cutting diameter 300 mm capacity 90 degrees: flat 320 x 290 mm Nodpfxjzv Ul De Af Sjlg capacity 45 degrees: flat re 300 x 280 mm capacity 45 degrees: round re 300 mm capacity 60 degrees: flat re 190 x 200 mm capacity 60 degrees: round re 200 mm capacity 45 degrees: flat li 270 x 200 mm capacity 45 degrees: round li 270 mm turning speed range: 20 - 100 m/min saw band length 3660 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 650 kg range L-W-H 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Special price available upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron turntable * For miter cuts from 45° left to 60° right - Hydraulic feed mechanism Material clamping - Ergonomic control panelâ??front right, swiveling - Coolant system - Operatoration manual * Semi-automatic work cycle: After the cycle starts, the vise closes automatically, the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: good (used), Year of construction: 2006, cutting diameter 335 mm capacity 90 degrees: flat 500 x 335 mm saw band length 4400 x 34 x 1.1 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight 250 kg/m coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. 1800 kg range L-W-H 2000 x 2200 x 1900 mm current list price: approx. 45.000 euros Special price available upon request Nsdpezy Sd Esfx Af Solg Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only - Automatic material feed - Continuously variable lowering speed 0â??300 mm/min - Band saw speed controlled by frequency-regulated AC drive (15â??150 m/min) - Automatic cutting pressure and feed monitoring - Hydraulic full-stroke material clamping - Automatic movement of the clamping blocks - Operatorâ??s manual

Condition: ready for operation (used), Year of construction: 2007, cutting diameter 320 mm saw band length 3400 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 400 mm capacity 45 degrees: flat LI 320 x 280 mm capacity 45 degrees: flat RE 320 x 260 mm capacity 60 degrees: flat RE 320 x 140 mm band speed 35 + 70 m/min work height max. 930 mm voltage 400 V total power requirement 2.67 kW weight 950 + 250 kg well-maintained condition (!!) current new price incl. accessories ~ 40.000 Euro special price on request Nodpfx Asym D Drjf Solg - in checked conditions - machinevideo - ?v=AHgMDxAcpgE Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - miter cuts are carried out fully automatically * electro-hydraulic miter adjustment left right - Up to 99 cutting programs - Central operation of all machine functions from the front - Loading also possible from above - Precise positioning thanks to accurate measuring system - electro-hydraulic miter adjustment left right - Electro-hydraulic material clamping - electro-hydraulic infeed from the saw arm * steplessly adjustable (cutting pressure control) - Operating instructions (PDF) * Special accessories included : - BAUER material feed unit - Micro-dosing device (spray oiler)

Condition: new, roll diameter 520 mm throat 520 mm workpiece height 310 mm cutting speed 25 - 500 m/min table surface area 600 x 500 mm band length 3.880 x 3-16 mm mm Table tiltable up to 15° Grad work height max. 1000 mm total power requirement 1,5 kW weight of the machine ca. 500 kg. dimensions of the machine ca. 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results Nodpfx Aexaazxjf Sslg - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min Nodpozkbn Usfx Af Sslg vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Plaintiff: Kläger VBS 405 S Vertical bandsaw / metal bandsaw Nedpfszy Stgox Af Solg Manufacturer: Kläger Type: VBS 405 S Condition: used, very good Year of manufacture: 2006 Cutting width: 400 Table tilt right/left 45°/15° Table size: 607 x 607 mm Saw band width: 3-20 mm Saw band length: 3300-3400 mm Band speed: 15 - 300 m/min Length: 1120 mm Width: 740 mm Height: 1930 mm Weight: 510 kg - Ideal saw band welding device - Original documentation - Machine feet

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 280 mm, cutting width (max.): 280 mm, total height: 1,590 mm, total length: 2,680 mm, total width: 2,540 mm, overall weight: 1,750 kg, Equipment: chip conveyor, rotational speed infinitely variable, The KASTO SBA 280 AU is a powerful horizontal bandsaw automation system for the precise and economical cutting of solid and profile materials in general mechanical engineering as well as in series and single-item production. With a cutting diameter of up to 280 mm and a cutting range of 280 x 280 mm at 90°, the machine is particularly suitable for the reliable cutting of various materials and cross-sections. The robust design in combination with a continuously adjustable cutting speed of 17 – 90 m/min enables optimal adaptation to the respective material and ensures clean, dimensionally accurate cutting results. The feed unit allows feed lengths of 600 mm (single) or up to 5400 mm (multiple) – for an efficient, largely automated material flow with minimal scrap length from 30 mm. The core of the system is the proven KASTO Compact Control, which offers intuitive operation, simple programming of cutting lengths and quantities, and a high level of process reliability in automatic operation. The integrated coolant system ensures optimal cutting conditions and a long service life of the saw blade, while the chip conveyor ensures clean and trouble-free chip removal. With a compact footprint of approximately 2.68 x 2.54 x 1.59 m and a machine weight of approximately 1.75 t, the SBA 280 AU offers high stability and smooth running, which has a positive effect on cutting quality and service life. Overall, it is a reliable and versatile bandsaw automation system that combines precision, performance and economy in industrial production. --- Optional Accessories A conveyor belt in lengths of 310 cm and 420 cm can be purchased separately to match the machine – for an optimized material flow and comfortable handling of the cut material. --- You are welcome to inspect the machine in our factory while it is running. If you are interested, we will gladly send you demonstration videos of the machine. Nlodpfxjzk Hacs Af Sjg Upon request, we offer delivery and commissioning of the machine as a comprehensive, all-inclusive package. You are in the best hands with us – professional, reliable and with a passion for machines! PS CNC Service Germany GmbH & Co. KG

Condition: excellent (used), CATALOG NUMBER 7050 TECHNICAL DATA - Wheel diameter: 800 mm - Table dimensions: 1100x800 mm - Angle-adjustable table - Motor: 5.5 kW - Max cutting height: 340 mm - Throat/clearance (blade to frame): 680 mm Nedpfxszrlfmo Af Sjlg - Extraction port diameter: 90 mm - Dimensions (L/W/H): 1500x950x2600 mm - Weight: 987 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 8,900 PLN Net price: 2,120 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Horizontal thin-cutting band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. Nledpfezy H Dyjx Af Sog 80 mm blade width Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: used, Year of construction: 1978, machine/vehicle number: 1010, Roller diameter: 1,000 mm Band saw blade length: 7,100 mm Nedpfshzgnzjx Af Selg Maximum cutting width: 960 mm Maximum cutting height: 620 mm Motor: 5.5 kW Table size: 1,450 x 1,030 mm Dimensions (L x W x H): 1,900 x 1,160 x 3,130 mm Sold as is Ex works, from the Seevetal location Excluding freight and packaging Subject to prior sale

Condition: good (used), Year of construction: 2000, functionality: fully functional, Equipped with a roller conveyor. Cutting capacity: Ø 400 mm. Machine weight: 2,850 kg. Nlsdpfx Afoz Ap Exj Seg

Condition: ready for operation (used), functionality: fully functional, Manufacturer: Cosen Model: NC4038H Horizontal Dual-Column Band Saw Rectangular Capacity (Height): 401.32 mm Rectangular Capacity (Width): 381 mm Nlodpfxoz Ap A Dj Af Sog

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, power: 7.3 kW (9.93 HP), input voltage: 400 V, roller diameter: 700 mm, total height: 2,270 mm, total width: 800 mm, overall weight: 500 kg, table height: 900 mm, Equipment: motor brake, robust band saw BSM 700, manufacturer FAMA, Nledpfxezizu So Af Sjg year of manufacture 1983, 7.3 kW motor, foot brake, band length 5,150 mm.

Condition: used, Used machine Nledezy Dzpspfx Af Ssg Equipment and technical data:

Condition: excellent (used), Year of construction: 2014, Equipment: CE marking, Heavy-duty, semi-automatic band saw for cutting steel plates and blocks - including coolant system - including chip conveyor - including stepless cutting speed control - including stepless, hydraulic feed rate control - including hydraulic band tensioning Technical data: Nljdpfx Afjzhlcds Ssg Cutting range H=600 mm; overhang=660 mm; L=2,500 mm Saw band dimensions 6,140 x 54 x 1.6 mm Saw band speed up to 20-80 m/min Saw motor power 7.5 kW Table height approx. 1,475 mm Cutting length max. 2,500 mm Dimensions 5,320 x 2,200 x 3,200 mm Weight approx. 7,500 kg including various clamping devices

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 20 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 500 mm, control type: PLC-controlled, roller diameter: 80 mm, pivoting range: 90 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,522 mm, total length: 2,030 mm, total width: 3,700 mm, overall weight: 3,235 kg, table height: 800 mm, year of last overhaul: 2026, saw blade length: 6,200 mm, saw blade width: 41 mm, type of cooling: water, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, PEGAS 540 CALIBER A-CNC Automatic Two-Column Metal Band Saw ✓ Machine sold directly by the manufacturer ✓ Manufacturer's showroom demonstration machine ✓ Now available for sale ✓ 6-month warranty ✓ Service and spare parts provided directly by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty industrial construction ✓ Inspection and test run available before purchase ✓ Available for immediate delivery Technical Specifications Maximum cutting capacity (round): 550 mm Maximum cutting capacity (rectangular): 550 × 520 mm Straight cutting (0°) Fully automatic CNC operation Variable blade speed: 20–120 m/min Main motor power: 5.5 kW Saw blade dimensions: 6200 × 41 × 1.3 mm Automatic hydraulic material clamping Nsdszhm Uzjpfx Af Sslg Automatic servo-driven material feeder Mitsubishi PLC control with colour touch-screen Hydraulic blade tensioning Automatic blade load control Coolant system Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 3,700 kg Manufacturer's Showroom Machine We are the manufacturer of PEGAS band saws, and this machine has been used exclusively as our showroom demonstration unit. It has been professionally serviced by our own technicians, carefully maintained, and kept in excellent working condition. The machine is now available for sale as part of our showroom renewal programme. This is a unique opportunity to purchase a manufacturer-maintained demonstration machine with a full service history and immediate spare parts support. Built for High-Volume Industrial Production The PEGAS 540 CALIBER A-CNC is a highly productive, fully automatic two-column band saw designed for demanding industrial applications and continuous production. It is engineered for straight cutting of solid bars, tubes, profiles and bundles made of carbon steel, stainless steel, tool steel and other metallic materials. Its rigid construction and advanced CNC control ensure maximum productivity, outstanding cutting accuracy and long-term reliability. The machine features a servo-controlled automatic material feeder with programmable cutting cycles. The Mitsubishi PLC control system with a colour touch-screen allows the operator to store up to 100 cutting programs, each with multiple cutting lengths and quantities, making it ideal for serial production. Automatic positioning, material feeding and cutting significantly reduce setup time and increase production efficiency. The robust two-column design minimizes vibration during cutting and provides exceptional rigidity. The continuously variable blade speed, hydraulic blade tensioning and automatic blade load control optimize cutting performance while extending blade life. The machine is also equipped with automatic coolant delivery, powered blade cleaning and a fully enclosed guarding system for maximum operator safety and reliable operation in demanding production environments. Inspection and Test Run The machine can be inspected and tested under working conditions at our manufacturing facility in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine, answer any questions, and provide additional technical information.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 820 mm, total width: 1,010 mm, total height: 2,030 mm, For sale is a bandsaw from C.E. Reich. Type: Industrie 500 Year of manufacture: 2018 Saw band dimensions: 3800 mm x 16 mm Nljdpfjz Aibtjx Af Ssg Band speed: 30 m/sec. The Reich Industrie 500 bandsaw is a bandsaw with a fixed, welded table, portion stop, material pusher, and sliding table, suitable for cutting food products such as meat, bones, sausage, cheese, or fish. The food products can be processed fresh or frozen.