Used Maho Mh 500 C for sale (463)

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 10915551234, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, total height: 2,900 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 9,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, mount diameter: 40 mm, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Rated current: 100 A Connection: 48 kVA Rapid traverse in B-axis: 40 m/min Rapid traverse in C-axis: 50 m/min Measuring system: Resolution in C, B, X, Y, and Z axes: 0.001 mm Position tolerance in C, B, X, Y, and Z axes: 0.010 (with direct measuring system) Travel range B-axis: 0-161.955° Travel range C-axis: 360° Max. tool diameter without free adjacent positions: 80 mm Max. tool diameter with adjacent free positions: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight for automatic tool change: 6 kg NC rotary table with swivel axis (C-axis) Clamping surface (rotary axis): 500 x 380 mm T-slot pitch: 63 mm/14h7 Centering bore: 30 mm diameter h6 Hjdpfx Afoxninqjijfn Max. torque rotary axis: 1491 Nm Max. table plate speed: 50 rpm B-axis: Max. swiveling torque: 1864 Nm Swiveling speed: 40 rpm Swivel range: 0-161.955° Load capacity: approx. 420 kg Max. load positioned in table center: 200 kg Including zero-point clamping system by SCHUNK and clamping rail Rail length: 490 mm Jaw width: 90 mm Including chip conveyor, extraction filter by SARA PICK-UP INFORMATION: Pick-up must be scheduled firmly between December 10th and 12th FCA Winterlingen, loaded onto truck

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, General Data Measurements width 2530 mm Measurements depth 2050 mm Measurements height 2650 mm Machine weight 5500 kg Main Drive Spindle speed range 10000 Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Rapid Traverse 25–30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 25–30 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 25–30 m/min Table Table load 600 kg Tools Number of station 20 Max tool diameter 80 mm Max tool length 300 mm Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. Hfsdpfx Afexnd I Seien Application Types Milling

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 650 mm z-travel 550 mm Control Mill Plus auto power on hours ca. 45.000 h turning speed range - main spindle 30.000 min/-1 Hodpfxevdufdj Afiofn tool taper HSK 50 E In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2004, x-travel 600 mm y-travel 700 mm z-travel 600 mm Hfedpsw Rrcqofx Afijn Control HEIDENHAIN TNC 530 Tool taper SK- 40 Tools changer 120 fach number of spindle speeds 12.000 U/min/rpm Machine on 32.224 Spindle hours 10.850 h weight of the machine ca. 9,5 t dimensions of the machine ca. 5,45 X 3,53 X 2,63 m

Condition: excellent (used), Year of construction: 2005, CNC machining center DECKEL MAHO DMF 220 Year: 2005 Control: Siemens 840 D Technical data: Travel (axes): Hfedoxm Umpopfx Afion X: 2200 mm Y: 560 mm Z: 720 mm Speed range: 20–12,000 rpm Table size: 2600 x 600 mm 30 tool magazine positions SK 40

Year of construction: 1996, condition: good (used), A used machining center of the company DECKEL MAHO equipped with: - MillPlus CNC control - Rigid angular table - coolant system - lighting system Hfodpfxehzt Tho Afijn - tool changer 25-fold - documentation traverse X/ Y/ Z 800/ 650/ 550mm spindle speed 20- 6300rpm tool holder SK 40 Further tech. Data: see pdf. document Tech. Data and dimensions: Errors excepted.

Condition: good (used), functionality: fully functional, machine/vehicle number: 71.708181, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: SIEMENS, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, table width: 500 mm, table length: 700 mm, table load: 200 kg, overall weight: 2,500 kg, spindle speed (max.): 9,000 rpm, number of slots in tool magazine: 16, mount diameter: 40 mm, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Rated current: 35 A Connection: 17 kVA Position measuring system X, Y and Z-axis: 0.001 mm Position tolerance X, Y and Z-axis: 0.010 mm with direct measuring system Max. tool length from spindle nose: 290 mm Hfjdpfx Asxm Uacofion Max. tool weight for automatic tool change: 6 kg Max. total tool weight in magazine: 50 kg Rotary table with swivel axis Rotation range: 360° Table plate clamping: mechanical Swivel range: +95/-10° COLLECTION INFORMATION: Collection must take place, without exception, between December 10 and 12. FCA Winterlingen, loaded onto truck

Condition: used, Year of construction: 1999, x-travel 800 mm Hedjxmtvcspfx Afiefn y-travel 700 mm z-travel 600 mm Control Heidenhain TNC 426/ 430PB total power requirement 15 kW weight of the machine ca. 8,4 t

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Number of axis 3 Movement X-Axis Movement 900 Y-Axis Movement 650 Hfjdpfjwgf D Iox Afisn Z-Axis Movement 600 This 3-axis DECKEL MAHO DMU 80T vertical machining center was manufactured in 2002. Ideal for precision machining, it offers robust construction and reliable performance. Consider the opportunity to buy this DECKEL MAHO DMU 80T vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, Immediately available from toolmaking in Switzerland: 5-axis milling machine Deckel Maho Type: DMU 35 M Year of manufacture: 2000 CNC control: Heidenhain TNC 310 M Electronic handwheel Table: 400 x 280 mm Table load up to 100 kg Travel X/Y/Z: 350/240/340 mm Stepless spindle speeds: 0 – 5000 rpm Taper: SK 40 Rapid traverse: 5 m/min Servomotors for X/Y/Z axes Swivel range: 360° Hjdpfxexn R Dts Afiofn Table clamping: +105/–150° Weight: 2 t Tool holders, hydraulic vise Price: EUR 6,500 plus VAT ex works location.

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC 426M Heidenhain turning speed range - main spindle 20 - 9.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 57 / 82 Nm tool taper ISO 40 DIN 69871 table diameter 700 x 500 mm swivellable B: 105° (-10°/+95°) man. rotatable 360° man. max. table load 200 kg Hfjdpfx Afsxmag Usijn number of T-slots 7 T-slot - distance 63 mm T-slot - width 14H7 mm center hole 30H7 mm number of toolpositions 16 pos. tool taper ISO 40 DIN 69871 max. tool length 290 mm max. tool weight 6,0 kg max. total weight 50 kg feed speeds max. 10.000 mm/min rapid traverse 12 m/min input unit 0,01 mm total power requirement 17 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - MachiningCenter Univresal DECKEL MAHO - DMU 50 T - 5 Axis (3 + 2) - Swivel-Rotary-Table incl. Angle-Specification (manual Axis B+C via Handwheel)

Condition: good (used), Year of construction: 2001, Dear Sir or Madam, below we offer you a 5-axis CNC machining center 'DECKEL MAHO' DMU 50 eVo, used, in good condition. Hfodpfx Afjw Axahjien

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11035534144, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment term is one week after purchase of the machine! Bidding obligates the buyer to collect the machine on time between 17.11.2025 and 21.11.2025! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate in X, Y, and Z axes: 10,000 mm/min Maximum spindle speed: 9,000 rpm Tool holder: SK 40 Hodpfxjxm T I Ej Afijfn Max. tool length from spindle nose: 290 mm Max. tool weight with automatic tool changer: 6 kg Max. total tool weight in magazine: 50 kg Clamping area: 700 x 500 mm Rotary range: 360° Swivel range: +95/-10° Permissible worktable load: 200 kg MACHINE DETAILS Control model: SIEMENS SINUMERIK 810 D Dimensions & weight Dimensions (L x W x H): 2,300 x 2,000 x 2,300 mm Total weight: 5,000 kg EQUIPMENT 16-position tool changer Rotary table with swivel axis Mechanical table plate clamping Note: The machine vices shown on the table are not included in the scope of delivery.

Condition: used, Year of construction: 1997, operating hours: 10,227 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, table width: 540 mm, table length: 1,000 mm, overall weight: 4,500 kg, spindle speed (max.): 12,000 rpm, For sale is a machining centre from Deckel Maho, model DMU 60 E. The machine is fully functional and ready for immediate use. Particularly noteworthy are the low program run hours. Technical data: Year of manufacture (estimated): 1997 Control: HEIDENHAIN TNC 426PB Control ON: 8,283 h Machine ON: 31,148 h Program run: 10,227 h Total power requirement: approx. 26 kVA Travel X-axis: 600 mm Travel Y-axis: 525 mm Travel Z-axis: 500 mm Clamping surface: 1,000 x 540 mm Max. table load: 350 kg Spindle speed range: 20 - 12,000 rpm Tool holder: SK 40 Feed speed: 20 - 10,000 mm/min Rapid traverse X/Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min Tool changer: 25 positions Dimensions (L x W x H): approx. 2.95 x 2.1 x 2.26 m Hedpfxsw I R I He Afiefn Weight: approx. 4,500 kg Transport and loading can be organised throughout Europe at additional cost, upon request. All prices are subject to VAT. Inspection possible by appointment. Contact us — our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2008, Main Drive Number of axis 5 This 5-axis DMG DECKEL MAHO DMU 70 eVo was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO DMU 70 eVo universal machining centre. Contact us for more information. Application Types Hfedpfew E Rnpsx Afien Milling

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex location: CNC machining center Deckel Maho Type: DMC 70 hi – dyn Year of manufacture: 2001 Heidenhain TNC 426 Spindle hours: 2,400 SK 40 Spindle speeds up to 18,000 rpm Tool changer with 30 positions Table: 900 x 550 mm Hfedjxn Rz Sepfx Afijn Table load: 800 kg Travel X/Y/Z: 700/550/500 mm Spindle power: 25 kW Chip conveyor Weight: 7,500 kg Price: EUR 9,750 plus VAT, ex location

Condition: used, Year of construction: 1999, x-travel 1.250 mm Hfedpfsxmagnex Afijn y-travel 880 mm z-travel 800 mm control TNC 430 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 60 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T

Year of construction: 1997, condition: good (used), A vertical machining center from DECKEL MAHO, used in good condition. Equipment - CNC control PHILIPS DIALOG 112 - Direct path measurement (rulers) - tool magazine - Electronic handwheel - Central lubrication - Spindle cooling - documentation Travel X/ Y/ Z 700/ 550/ 500 mm spindle speed infinitely variable 15.000 rpm table dimensions 900 x 550 mm table load 800 kg Hfsdpoi Dt Dksfx Afijn working feed X/ Y 1 - 10000 mm/min rapid traverse X Y Z 30 m/min rapid traverse Z 20 m/min tool magazine 30 places Tool holder SK 40 Rated power 50 KVA Rated current 70 A Compressed air supply 6 bar Transport dimensions L x W 3.3 x 2.4 m Machine height 2,6 m Weight of the machine 7000 kg Technical data and dimensions: Errors excepted.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 2881-0191, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS DIALOG 112, spindle speed (max.): 8,000 rpm, No reserve price – guaranteed sale to the highest bidder! Payment is due one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL SPECIFICATIONS Travel X-axis: 700 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Feed rate X, Y, Z: 1 - 10,000 mm/min Rapid traverse X, Y: 30 m/min Rapid traverse Z: 20 m/min Setup mode speed X, Y, Z: 1 - 2,000 mm/min Table width: 550 mm Table length: 900 mm Table load: 800 kg Max. setup height: 600 mm Distance spindle nose to table: 150 - 650 mm Max. spindle speed: 8,000 rpm Tool magazine positions: 40 Holder diameter: 40 mm Hfedpoxm Ty Ijfx Afien Tool holder: SK 40 Max. tool diameter for standard tools: 80 mm Max. tool diameter for special tools with free adjacent slots: 140 mm Max. tool diameter for boring heads with free adjacent slots: 200 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 12 kg Control model: SIEMENS DIALOG 112 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,300 x 2,900 mm Total weight: 8,000 kg EQUIPMENT Documentation/manual Chip conveyor Note: The magnetic clamping plate shown on the table is not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2002, CNC MACHINING CENTER DECKEL MAHO DMC 64 V LINEAR 2002 Heidenhain iTNC 530 Technical Specifications: X-AXIS MOVEMENT: 640 MM Y-AXIS MOVEMENT: 600 MM Z-AXIS MOVEMENT: 500 MM SPINDLE SPEED RANGE: 12,000 RPM TOOL HOLDERS: SK 40 OUTER LENGTH: 850 MM Hodpfxowgk Dgo Afiofn OUTER WIDTH: 630 MM MAX. TABLE LOAD: 600 KG

Condition: good (used), Year of construction: 2001, Travel X/Y/Z: 500mm/420mm/380mm, Table dimensions X/Y: 500mm/380mm, Max. table load: 200kg, Spindle speed: 18,000 rpm, Tool holder: SK40, Tool positions: 30, Rapid traverse: 50m/min, Machine dimensions: approx. 3400mm/2400mm/2500mm, Weight: approx. 6000kg. Equipment: 30-position tool changer CNC control: Heidenhain MillPlus Hsdpjwi H E Ejfx Afiofn NOTE: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and proper installation – all from a single source. Billing according to individual terms and duration. Contact us for your personalized offer.

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex-site: Deckel Maho CNC Machining Centre Type DMC 125 hi–dyn Control: Heidenhain Millplus Travel paths: 1250/800/880 mm Tool holder: HSK 100 60-position tool changer Spindle speeds up to 10,000 rpm Drive power: 25/38 kW Pallets: 2 Hedpfx Afsxn Rzxjijfn Pallet size: 1000 x 800 mm Table load: 1,500 kg 360-degree rotary capability NC rotary table Pallet changer Clamping hydraulics: setup station 1 x double-acting, 1 x single-acting; workspace 1 x single-acting IKZ (internal coolant supply) Chip conveyor Weight: 15 t Overhauled for €120,000 in the last 3 years Price: €24,500 plus VAT, ex-site

Condition: used, Year of construction: 2001, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, nominal power (apparent): 17 kVA, torque: 82 Nm, controller manufacturer: Heidenhain, controller model: Mill Plus, total height: 2,450 mm, total length: 4,000 mm, total width: 2,200 mm, table width: 700 mm, table length: 500 mm, table load: 200 kg, overall weight: 3,500 kg, We are offering here a Deckel Maho DMU 50 T with Heidenhain Mill Plus control for sale. Hfedow Dfbhopfx Afijn

Condition: not inspected (used), operating hours: 28,461 h, functionality: unexamined, machine/vehicle number: 28850008692, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK 810 D, table load: 500 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline is one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL DETAILS Travel X-axis: 630 mm Travel Y-axis: 500 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Feed rate X-axis: 0–30,000 mm/min Hfjdpfsxm Tu Esx Afijn Feed rate Y-axis: 0–30,000 mm/min Feed rate Z-axis: 0–30,000 mm/min Tool holder: SK 40 Number of tool positions: 24 Table width: 500 mm Table length: 800 mm Max. table load: 500 kg Loading height: 850 mm MACHINE DETAILS Control model: SIEMENS SINUMERIK 810 D Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,400 x 2,400 mm Total weight: 8,000 kg Operating hours: 28,461 h

Condition: used, Year of construction: 1997, Immediately available from training workshop: Hodpfx Afoxn Rzloiofn CNC 5-axis milling machine Deckel Maho Type DMU 50 T Year of manufacture: 1997 Control: MillPlus SK 40 Spindle speeds: 20 – 9,000 rpm Travels X/Y/Z: 500/400/400 mm Table: Swivel rotary table 700 x 500 mm Manually tiltable B 105 (–10/+95 degrees) Manually rotatable 360 degrees Max. table load 200 kg Tool changer with 16 positions Max. feeds 10,000 mm/min Rapid traverse 12 m/min Drive 17 kW Weight 3 t Extensive accessories: hydraulic vice, tool holders, milling cutters Price: EUR 7,500.—plus VAT ex location