Machining Center - Vertical

DECKEL MAHO DMC 835 V New Design

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Technical data shown on pictures. Iodpfxeuxrv Hs Akxotf

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place Itedpfxew A I Uuj Akxjf spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

Condition: used, Year of construction: 1976, cone distance min./max. 0/108 mm Pitch angle min/max 5°/84° Ijdpfx Aoyh Rmtokxetf Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm speeds: 98-286 weight of the machine ca. 6577 kg dimensions of the machine ca. 1560 x 2140 x 2200 mm Equipment/accessories: -Cutting tools -Spacer angle -Technical documentation

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,000 g, number of axes: 3, This 3s HAAS VF-2SSYT CNC Vertical Machining Center manufactured in 2024 features a maximum spindle speed of 12,000 rpm and a robust tool changer with a capacity of 30+1 tools. The machine has been lightly used and is in excellent condition, offering travels of 762 mm in the X-axis and 508 mm in both Y and Z axes. Consider the opportunity to buy this HAAS VF-2SSYT vertical machining center. Contact us for further details. • Spindle nose to table (max/min): 610 / 102 mm • Table: • Size: 914 x 457 mm • T-slots: 3 • T-slot width: 15.9–16 mm • T-slot center distance: 125 mm • Spindle: • Max torque: 122 Nm @ 2000 rpm • Drive: Inline Direct-Drive • Taper: CT40 / BT40 / HSK-A63 (depending on configuration) • Bearing lubrication: Air/Oil injection • Tool changer: • Type: SMTC • Capacity: 30+1 tools • Max tool diameter: 64 mm (127 mm with adjacent pocket empty) • Max tool length: 279 mm • Tool-to-tool: 1.8 s • Chip-to-chip: 2.4 s • Feedrates: Itodpoykrz Hefx Akxef • Max cutting feed: 21.2 m/min • Rapids (X/Y/Z): 35.6 / 35.6 / 35.6 m/min • Axis motors (thrust): • X: 8,874 N • Y: 8,874 N • Z: 13,723 N • Electrical: • Input voltage (low): 220 VAC, 70 A full load • Input voltage (high): 440 VAC, 35 A full load • Coolant: Capacity 208 L • Air requirements: • Air required: 113 L/min @ 6.9 bar • Minimum pressure: 5.5 bar • 4th-axis ready Additional equipment • Mist/vapor extraction system • Automatic water and oil dosing system for coolant • Integrated coolant oil separator • Renishaw probe system • 2 vises • Complete set of high-quality toolholders, end mills, and drills

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Iedjwm Rqaspfx Akxotf Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Condition: used, Year of construction: 2002, CNC milling machine Manufacturer: Hermle Model: C600U Year of manufacture: 2002 CNC control: Heidenhain iTNC 530 Travel (X/Y/Z): 600 x 450 x 450 mm NC swivel rotary table Rotary range: C-axis 360° Spindle speed: 30,000 rpm Tool holder: HSK40 Ijdpfxsyzirfo Akxjtf Tool changer: 30 positions Operating hours: approx. 22,000 16426

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm z-travel 460 mm c-axis 360 ° b-axis -50 / +110 ° Iodpexap Eajfx Akxotf distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 500 kg spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar voltage 400 V total power requirement 35 kW weight of the machine ca. 10,0 t dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

Condition: ready for operation (used), Year of construction: 2007, operating hours: 620 h, Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Iedpfx Akjw Dfhzsxotf

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Iodpfxouyk N Ie Akxetf

Condition: new, Year of construction: 2022, IN STOCK -- The ARG 235 plus is a manual metal bandsaw with high cutting accuracy. This machine allows miter cuts from -45° to +30° continuously (swivel range left 45° and right 60°) Technical Specifications: ● Cutting range: - 90° round: 235 mm / square: 230 mm / rectangle: 280 x 180 mm - 45° Right round: 165 mm / square: 145 mm / rectangle: 185 x 180 mm - 30° Right round: 115 mm / square: 80 mm / rectangle: 115 x 80 mm - 45° Left round: 185 mm / square: 160 mm / rectangle: 185 x 100 mm ● Drive Power Saw Blade: 0,9 / 1,4 kW / 400 V / 50 Hz ● Saw Blade Speed: 40 and 80 m/min ● Saw Blade: 2710 x 27 x 0,9 Standard Equipment: ● Powerful saw blade drive ● Stepless adjustment of the cutting feed from the control panel ● Manual clamping of the workpiece, movable clamping stock with dovetail guide Isdpfemftv Rox Akxjtf ● Easy adjustment of the saw for miter cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in different sizes or versions!