Used Maho Mh 400 for sale (443)

Condition: used, Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Rjdezg Ibmspfx Aahsw Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

Condition: good (used), Year of construction: 1987, Travel X/Y/Z 400/250/375 mm, 18 speed 80 - 4000 U/min, motor 2,2 KW, spindle SK 40, control MAHO CNC 232, table size 700x270 mm, hydraulic tool clamping, coolant device, spash guard, 20 tool holders with tools, tool setter, machine vice GOODJ 125 N, clamping set, machine feet, several tools, manual Rodpjlu Hpgsfx Aahjw

Condition: used, CNC tool milling machine MAHO, type MH 400 E Machine no. 43072, year of manufacture 1989 Travel distances X: 400 mm, Y: 250 mm, Z: 375 mm Table size 700 x 270 mm Distance spindle nose / table max. 410 mm Tool holder ISO 40 with draw bolt type B Spindle speed 80 - 4000 rpm, 18 steps Feed rate 1-1500 mm/min, stepless Rapid traverse (X, Z and Y) 2.5 m/min. Quill travel, vertical 50 mm Spindle drive 2.2 kW Power connection 400 Volt, 50 Hz, 19 kVA - swiveling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping system Rjdpfx Aeh Ic Ufoahow - pivoting device for the vertical milling head - splash guard cabinet as a table enclosure with 3 fold-up doors - electrical control cabinet fixed to the machine - V24 (RS 232) interface for data transfer - 52470 operating hours, main switch on - fixed angular table - coolant system with coolant pump located next to the machine - central oil lubrication system Vogel - operator's manual, electrical wiring diagram Space requirement L x W x H 2250 x 1800 x 1850 mm Weight approx. 1.5 tons good condition

Condition: good (used), x-travel 400 mm Rsdpjxl E Sysfx Aahew y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - operating instructions

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 40167, Auction of a MAHO universal milling machine! Redpfox Ngkzjx Aahew

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Rjdpfxexf Ur Nj Aahew

Condition: used, Technical details: Rodpfxszibabo Aahew x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm control: Heidenhain TNC 121 spindle taper ISO: SK 40 quill stroke vertical: 120 mm spindle head swivable left - right: je 90° ° turning speed range: 40 - 1.600 U/min throat of the milling spindle: 200 mm table surface area: 1.050 x 627 mm table swivable approx.: +45/ -45 Grad table rotating: 360 Grad table movement - horizontal: 200 mm table feed: X/Z 5 - 5.000 mm/min table feed: Y 2,5 - 250 mm/min total power requirement: 8 kW weight approx.: 3,2 kg dimension machine xH: 2,3 x 2,0 x 1,850 m

Condition: used, overall weight: 1,500 kg, This deck-type Maho milling machine, model: type: MH 700 C, will be auctioned off online in our industrial auction / machine auction by Kusch+Co GmbH – including painting booths – milling and drilling machines – industrial sewing machines – grinding machines – workshop and office equipment. You can find this and many other items on our platform. Rodpfezfig Iex Aahjw

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Redpfx Aszg Ti Aeahow Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Weight 1600 kg Adapters Hydraulic vise Price: €3,000 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Rjdpszg Tivefx Aahew Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: used, total power requirement 7 kW weight of the machine ca. 3500 kg Redoy Nnyqepfx Aahsw dimensions of the machine ca. 2300x1900x2000 mm

Condition: used, Universal Milling Machine MAHO MH 800 Travel X: 700 mm Travel Y: 450 mm Travel Z: 450 mm Spindle SA 40 Spindle exit : 125 mm Spindle speed: from 32 to 1600 RPM Table size: Length 1050 mm x Width 620 mm Manual table travel: 225 mm Table rotation at 360° Swivel table at +/- 30° Scale 3 axes ACU-RITE Sensory drilling Feeds spindle not working Clutch speed used Lubricant pump Voltage: 380 V Width: 2000 mm Depth: 2100 mm Redpfozg Ickox Aahsw Height: 2500 mm Weight: 3 T

Condition: used, Year of construction: 1989, Universal CNC Milling Machine MAHO MH 600 E2 Travel X: 600 mm Travel Y: 400 mm Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Rsdezg Ib Hopfx Aahew Cone SA40 Spindle speed: from 20 to 4000 RPM Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3,5 T

Condition: used, Year of construction: 1985, For sale: MAHO MH 1000C milling machine Redpfezgu Iyox Aahjw Factory number 11429 BKW GmbH, model S.05ES Year of manufacture: 1985 18 bar; Volume: 1.6 m3/h; 3000 1/min; kW 0.36; 50/60 Hz; V 190-240; A 2.85; Net price: 700 EUR.

Condition: ready for operation (used), Year of construction: 2015, X-axis: 1600mm, Y-axis: 800mm, Z-axis: 800mm The base machine was manufactured in 1990, but was completely rebuilt in 2015 by MMD Bad Emstal, including a control system upgrade to iTNC530. (Guide rails ground and scraped, ball screw drive new or overhauled, bearings new, etc.) The machine was in NEW condition in 2015. *iTNC530 *IKZ (internal cooling) for air and water through the spindle center Rsdpfx Aaezgr Tgshew *Rotoclear *Chip conveyor *SK 50 chain, 32 teeth *Transport traverse *Crane loading possible *The machine is temporarily connected to the power supply and can be inspected by arrangement.

Condition: used, functionality: fully functional, CNC Machining Center MAHO MH 600 C – fully working, under power For sale CNC machining center MAHO MH 600 C, manufactured by MAHO AG (Germany). The machine was used in production and was operating until recently. It is fully functional and can be demonstrated under power. Control system: Grundig / Philips CNC 532 Serial number: 661999 Equipment: • Philips / Grundig CNC 532 control • automatic tool magazine (30 positions) • rotary table (4th axis) • coolant system • full machine enclosure Technical data: Rjdpfxjzgcifo Aahjw • X travel: 600 mm • Y travel: 450 mm • Z travel: 450 mm • spindle taper: SK40 • spindle speed: up to approx. 6300 rpm • tool magazine: 30 positions • machine weight: approx. 3.6 t Condition: • fully operational • used in production until decommission • available for inspection under power

Condition: used, Year of construction: 1991, x-travel 1200 mm y-travel 600 mm z-travel 600 mm total power requirement 25 kW weight of the machine ca. 11,5 t M A H O (Germany) CNC Controlled Bed Type Universal Machining Centre Model MH 1200 S (120012) Year 1991 * Partially reconditioned in Year 2007 by MMD Company _____ Table travel: X axis, longitudinal 1,200 mm Y axis, vertical 600 mm Spindle head Z axis, cross 600 mm Rotary Table size 1,000 x 800 mm Distance between spindle and column, max. 900 mm Spindle taper SK 40 Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm Max. weight of workpiece 1,000 kg Feeds / quick feeds, X, Y and Z Axes 1 – 4,000 / 12,000 mm/min Feeds / quick feeds, B Axis 1 – 1,500° / 10 rpm Spindle drive 15 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 11,500 kg Dimensions of machine 2.75 x 5.10 x height 2.90 / 3.40 m Accessories / Special Features: * MAHO Continuous Path Control, Model CNC 432, for 5 axes, with colour monitor, graphics, and all the usual subprograms and cycles. Mobile manual control unit with RS 232 Interface Entry for external data communication. * CNC rotary table (B Axis) in conjunction with the CNC Controlled swivelling milling head allows machining in 5 axes, Resolution 360.000 ° * Vertical, rotating milling head with hydraulic tool clamping. * Horizontal milling spindle with hydraulic tool clamping. * CNC controlled tool changer with 36 positions. Tool life supervision and tool breakage supervision. With RENISHAW Measuring Probe. * Separate coolant device (no internal coolant supply) * Complete covered working area with sliding doors. * Chip conveyor. Oil cooler for the hydraulic system. Condition : Very good. Can be inspected under Power here in our stock. This is a very stable machine suitable for heavy cuts. It was partially reconditioned in 2007 by MMD Company: geometrically measured, and mechanic and electrics were tested - Redpfx Ast Hwqwsahsw a beautiful machine for the “ Conaisseur”. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1991, x-travel 1000 mm y-travel 500 mm z-travel 700 mm table surface area 1250 x 700 mm spindle taper ISO 50 spindle turning speed range 20 - 3200 U/min quill stroke 100 mm semi-automatic operated Phillips 432 Number of working hours 62.340 h main drive motor 22 kW total power requirement 27 KVA weight of the machine ca. 7,7 t base area 3,8 x 4,1 x 2,4 mm accessories: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Rjdpfjtv Ii Ijx Aahew Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Rotary axis as 4th axis with housing of the working area

Condition: used, x-travel 400 mm y-travel 400 mm Rsdexv D Uzjpfx Aahew z-travel 300 mm rapid traverse 1,2 m/min feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 stroke v60 h70 mm table - universal ca. 620 x 320 mm table vertical adjustable 350 mm weight of the machine ca. 1200 kg Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment

Condition: ready for operation (used), Maho milling table for Maho milling machine MH 700 S, milling table for interchangeable pallets 500x630 mm, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for costs of packing and shipping! Rsdsx Dw Iwopfx Aahjw

Condition: ready for operation (used), Maho milling head (Maho milling machine MH 700 S), used, normal signs of wear, 100% fully functional, scope of delivery as per photos. NOTE: Please enquire separately for costs of packing and shipping! Rodpsx Dw Iqofx Aahow

Condition: ready for operation (used), Maho double gripper for MAHO MH 600 E including accessories, see photos, used, normal signs of wear, 100% functional, scope of delivery as per photos Rjdsrv Ta Rspfx Aahjw

Condition: ready for operation (used), Maho turntable for MH 800 C without motor and encoder - Height: 59cm / Width: 61cm / Length: 90cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Rodpfx Aaotvct Hehew

Condition: good (used), Year of construction: 1995, operating hours: 28,099 h, functionality: fully functional, machine/vehicle number: 662280, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: DECKEL MAHO, controller model: CNC 425, total height: 2,000 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 480 mm, table length: 900 mm, overall weight: 2,000 kg, number of slots in tool magazine: 16, mount diameter: 40 mm, input voltage: 400 V, power: 20 kW (27.19 HP), input frequency: 50 Hz, input current: 50 A, DECKEL MAHO MH 600 W CNC Vertical Machining Center Rjdpfxsy I Tgye Aahsw - Tool holder: SK 40 - Table with 7 T-slots - Incl. rotary table from WALTER, type: TANIP125NEG, year of manufacture: 2010 Attention: The item must be collected between August 24 and August 27, 2026, on a date to be agreed upon. FCA D-61352 Bad Homburg - loaded onto a truck.

Condition: good (used), Second-hand machine in good condition Control type: Conventional active digital Location : 35708 Haiger Price : 13.500€ excl. Technical data: Digital display 3-axis digital display HEIDENHEIN TNC 134 Travel X-axis 500 mm Travel Y-axis 350 mm Travel Z-axis 380 mm Tool holder Vertical milling head SK 40 with hydr. tool clamping DIN 2080 ring groove Table type Fixed table Table clamping surface 800 x 360 mm T-slot size 14 mm Rsdpfx Aoigv Ipsahow Weight 1,600 kg Dimensions 1500 x 2000 x 1900 mm Accessories - Central lubrication - coolant system - Operating instructions