Used Maho 400 E for sale (432)

Condition: used, Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Credpez Nx Hwefx Aiiei Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

Condition: used, CNC tool milling machine MAHO, type MH 400 E Machine no. 43072, year of manufacture 1989 Travel distances X: 400 mm, Y: 250 mm, Z: 375 mm Table size 700 x 270 mm Distance spindle nose / table max. 410 mm Tool holder ISO 40 with draw bolt type B Spindle speed 80 - 4000 rpm, 18 steps Feed rate 1-1500 mm/min, stepless Rapid traverse (X, Z and Y) 2.5 m/min. Quill travel, vertical 50 mm Spindle drive 2.2 kW Power connection 400 Volt, 50 Hz, 19 kVA - swiveling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping system - pivoting device for the vertical milling head - splash guard cabinet as a table enclosure with 3 fold-up doors - electrical control cabinet fixed to the machine - V24 (RS 232) interface for data transfer Crodpfxsh Ic Ufs Aiiji - 52470 operating hours, main switch on - fixed angular table - coolant system with coolant pump located next to the machine - central oil lubrication system Vogel - operator's manual, electrical wiring diagram Space requirement L x W x H 2250 x 1800 x 1850 mm Weight approx. 1.5 tons good condition

Condition: ready for operation (used), Maho double gripper for MAHO MH 600 E including accessories, see photos, used, normal signs of wear, 100% functional, scope of delivery as per photos Crjdjrv Ta Rspfx Aiiji

Condition: used, Year of construction: 1989, Universal CNC Milling Machine MAHO MH 600 E2 Travel X: 600 mm Travel Y: 400 mm Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Cone SA40 Spindle speed: from 20 to 4000 RPM Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Depth: 2400 mm Total height: 2000 mm Crjdpfxjz Nx Hqj Aiiji Weight: approx 3,5 T

Condition: not inspected (used), Year of construction: 1992, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 3 m/min, table width: 700 mm, table length: 1,250 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 3,200 rpm, Vertical Machining Center Manufacturer: MAHO Model: MH 1000 E Year of manufacture: 1992 Technical details: X-travel: 1000 mm Y-travel: 500 mm Z-travel: 700 mm Table clamping surface: 1250 x 700 mm Spindle speed: 20 – 3,200 rpm Main drive motor: 22 kW Quill stroke: 100 mm Distance spindle head to table (min./max.): 138/600 mm Feed rate (X / Y / Z): 3,000 mm/min Rapid traverse (X / Y / Z): 60/50/60 m/min Total power requirement: 27 kW Used; sold without warranty Machine transport dimensions (LxWxH) approx.: 3900x2560x2550 mm Transport dimensions pallet/sheets (LxWxH) approx.: 1500x12000x600 mm Accessories, tools, and clamping devices shown are included in the scope of delivery Codpfx Ajzz S Rheiisri only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,000 kg, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, Commissioned in 2013 with RS 3 circular tool magazine (3 pallets) Control system: Heidenhain iTNC 530 HSCI Approx. 60 tools - SK40 IKZ (internal coolant supply) Heidenhain infrared probe Blum laser measuring system 3D Quickset Air cleaner Credpfx Ao Agnwdsiiji electric handwheel

Condition: good (used), Year of construction: 1991, functionality: fully functional, CNC sinker EDM machine MAHO HANSEN, Type: HS 500 E, Year of manufacture: 1991, with electrode changer (without electrode holders) and accessories. Control system: EROCOM 20 (Heidenhain). Crodjzcmanepfx Aiiei Technical data: see data sheets. From a toolmaking department; all documentation available, in good condition.

Condition: used, Year of construction: 1999, operating hours: 43,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, total height: 2,400 mm, total width: 2,600 mm, total length: 2,600 mm, type of input current: three-phase, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 500 kg, number of slots in tool magazine: 24, number of axes: 3, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used Deckel Maho DMU 80 E machining center, manufactured in 1999, for sale. Serial number: 1109.0001113 Year of manufacture: 1999 Cjdpfsz E Dl Nsx Aiisri Can be inspected while powered on Control system: Heidenhain 426m with internal hard drive If you have any questions or require further information, please do not hesitate to contact us via message or phone. The machine can be disassembled by the buyer. No direct sales to countries outside the EU. We will not handle customs clearance.

Condition: used, Year of construction: 1991, table length 780 mm table width 500 mm ampere 60 / 120 A Crjdpfxjzwg Rns Aiioi Control Heidenhain total power requirement 14,0 KVA weight of the machine ca. 4,0 t dimensions of the machine ca. 3,0 x 2,0 x 2,1 m Sinker EDM machine Control: Heidenhain / Erocom Table: 780 x 500 mm

Condition: used, Year of construction: 2000, operating hours: 27,825 h, functionality: unexamined, machine/vehicle number: 1093 0001613, Equipment: documentation/manual, used DMU 80 TNC 430. Crsdpfet Skhyjx Aiisi According to photos Without tools or vice complete operating instructions Reviewed annually. Bought used. 1-shift operation Always avaliable

Condition: ready for operation (used), Maho tool holder for Maho MH 800 C machine with Parker CJJ-HMRES23MC cylinder, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Crsdpfxjz Tbf Rs Aiioi

Condition: used, Year of construction: 1988, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Quill travel: 80 mm Work table Table size: 1,000 × 400 mm Spindle Spindle speed: 20–3,000 rpm Spindle mount: SK 40 Feed rate and rapid traverse Automatically programmable feed rate: 1–4,000 mm/min Rapid traverse: 6 m/min Control system Cjdpfez S Iz Nox Aiieri CNC control: Philips 432 Performance data Drive power: 12 kW Total power consumption: 15 kW EQUIPMENT Rotatable V-head Coolant pump Hydraulic tool clamping Automatic central lubrication Machine light Chip collection tray Splash guard enclosure

Condition: ready for operation (used), Milling head for Maho MH 800 C machine, without housing and with 1 sensor broken off, used, in good condition, 100% functional. Scope of delivery as shown in the photos. NOTE: Please request a separate quote for packaging and shipping costs! Crodpfx Aie Aaxgwjioi

Condition: used, Year of construction: 1997, operating hours: 10,227 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, table width: 540 mm, table length: 1,000 mm, overall weight: 4,500 kg, spindle speed (max.): 12,000 rpm, For sale is a machining centre from Deckel Maho, model DMU 60 E. The machine is fully functional and ready for immediate use. Particularly noteworthy are the low program run hours. Technical data: Year of manufacture (estimated): 1997 Cedjw I R I Hopfx Aiieri Control: HEIDENHAIN TNC 426PB Control ON: 8,283 h Machine ON: 31,148 h Program run: 10,227 h Total power requirement: approx. 26 kVA Travel X-axis: 600 mm Travel Y-axis: 525 mm Travel Z-axis: 500 mm Clamping surface: 1,000 x 540 mm Max. table load: 350 kg Spindle speed range: 20 - 12,000 rpm Tool holder: SK 40 Feed speed: 20 - 10,000 mm/min Rapid traverse X/Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min Tool changer: 25 positions Dimensions (L x W x H): approx. 2.95 x 2.1 x 2.26 m Weight: approx. 4,500 kg Transport and loading can be organised throughout Europe at additional cost, upon request. All prices are subject to VAT. Inspection possible by appointment. Contact us — our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, overall weight: 10,700 kg, Control unit defective, can be used as a source of spare parts. For self-collection. Details see attachment and available upon request. Crsdpfx Ajz Atpnoiiei The following parts have been removed: Axle control module PCU Control unit for cooling system

Condition: excellent (used), Year of construction: 2004, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller model: CNC Heidenheim ITNC 530, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 18,000 h, number of slots in tool magazine: 94, Equipment: chip conveyor, documentation/manual, Technical specifications Travel ranges: X = 750 mm, Y = 600 mm, Z = 520 mm Speed range: 20–18,000 rpm Tool interface: HSK 63 Tool magazine with 92 tool positions Laser tool measurement system integrated in the machine High-pressure internal cooling through the spindle center, 40 bar Crods Ahxzqjpfx Aiioi 3D probe Band filter General overhaul in 2021 The following work was carried out during the general overhaul: Replacement of hydraulic lines Replacement of linear guides and ball screws of the X, Y, and Z axes, including associated bearings and timing belts Replacement of scrapers and bellows Work carried out most recently in 2026 Repair of the Z-axis servo motor Replacement of the hydraulic unit for lubrication Replacement of the AC servo controller of the X-axis

Condition: ready for operation (used), Maho milling table for Maho milling machine MH 700 S, milling table for interchangeable pallets 500x630 mm, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for costs of packing and shipping! Crsdox Dw Iwepfx Aiisi

Condition: used, Year of construction: 2011, operating hours: 26,476 h, functionality: fully functional, workpiece height (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) Codpfx Aiez Dku Usiori RENISHAW Measuring probe Automatic door Machine running times Under power: 43774 Spindle Working: 26476 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: used, Year of construction: 2003, DMG DECKEL MAHO DMU 70 eVolution – 5-Axis CNC Universal Milling Machine Manufacturer: DMG / DECKEL MAHO Model: DMU 70 eVolution Year of Manufacture: 2003 Machine Type: CNC Universal Machining Center / 5-Axis Milling Machine Control System: HEIDENHAIN iTNC 530 Codpfx Aj Ah I A Uoiijri Condition: Used Technical Data Working Area and Axes Number of Axes: 5 Travel in X-axis: 750 mm Travel in Y-axis: 600 mm Travel in Z-axis: 520 mm NC Swivel Rotary Table with B and C axes Table Size: 700 × 500 mm Main Spindle Manufacturer: Kessler Motor Spindle, Year of Manufacture 2022 Installed by DMG MORI Service: March 2023 Spindle Operating Hours since Installation: approx. 2,100 h Maximum Spindle Speed: 18,000 rpm Tool Holder: HSK-A63 Tool Changer Automatic Tool Changer Tool Magazine: 60 positions Control System HEIDENHAIN iTNC 530 Electronic Handwheel Operating Mode 4 Coolant System Through-Spindle Coolant (TSC): 40 bar Coolant Tank: 600 liters Programmable Coolant Nozzles Flush Gun Equipment and Accessories NC Swivel Rotary Table (B/C axis) Automatic 60-position Tool Changer Kessler High-Frequency Motor Spindle Chip Conveyor Oil and Emulsion Mist Separator Infrared Measuring Probe HEIDENHAIN TS 641 Electronic Handwheel Through-Spindle Coolant with 40 bar Programmable Coolant Nozzles Flush Gun Not Included in Scope of Supply: Zero-Point Clamping Plate Vise Condition: Used: See Video and Pictures Positive: In March 2023, a new Kessler motor spindle (year of manufacture 2022) was installed by DMG MORI Service. Since installation, the spindle has only accumulated approximately 2,100 operating hours. RMS Safety System The machine is equipped with a retrofitted MORI SEIKI RMS system (location/relocation safety). Terms of Sale Sale as used Inspection possible by arrangement Dismantling, loading, and transport for an additional charge Sale exclusively to commercial businesses Sale with exclusion of liability for defects, as far as legally permissible Invoice with VAT shown.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: TNC430, overall weight: 6,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 32, Rapid traverse rate X/Y/Z: 50 m/min Tool holder: SK 40 Table: max. load approx. 200 kg Coolant system Codpfe Agm Tbjx Aiijri Chip conveyor Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Disassembly, transport and proper installation – all from a single source. Billing based on individual terms and conditions and duration. Contact us for your personal offer.

Condition: ready for operation (used), Maho milling head (Maho milling machine MH 700 S), used, normal signs of wear, 100% fully functional, scope of delivery as per photos. NOTE: Please enquire separately for costs of packing and shipping! Crsdpfjx Dw Iqjx Aiisi

Condition: ready for operation (used), Maho turntable for MH 800 C without motor and encoder - Height: 59cm / Width: 61cm / Length: 90cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Cjdpfx Aiotvct Hjijri

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Universal milling machine DMG FP4M Special Edition Codpfx Aijzung Eoieri With 3-axis digital display ND7013 by Heidenhain, in new condition, Made in Germany, CE compliant!!! Technical data: >> Year of construction 2022 >> Fixed angular table, clamping area 480x800 mm >> Spindle drive, speed range 25-3000 rpm, stepless adjustment with input on the control panel >> Controlled main drive 6 kW >> Vertical milling head, swiveling +- 90 degrees (180 degrees) >> Linear axes, feed range 6-500 mm/min >> Rapid traverse 1500 mm/min >> Space requirement (W+D) approx. 2.2 x 1.9 meters >> Weight approx. 1600 kg Accessories and equipment: >> Heidenhain digital display ND 7013 >> Coolant system >> Minimum quantity lubrication >> Central lubrication >> Machine feet >> Operating manual, etc. About the machine: Offered is a universal milling machine DMG FP4M Special Edition with a 3-axis digital display by Heidenhain ND 7013, in new condition. A reliable and user-friendly machine, Made in Germany. An oil change has been performed. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered on.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 2,000 kg, overall weight: 24,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 60, Completely overhauled by DMG in 2011. Tool holder: SK50 with tool storage for 60 tools. Credpfj Agaznex Aiioi IKZ (internal coolant supply). Max. spindle speed: 8,000 rpm. 30 kW spindle with swiveling milling head (B-axis). Infrared measuring probe. NC rotary table with pallet changer.

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min Crodpfxju Hkb Re Aiioi X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided