Universal Milling Machine

MAHO MH 400 P

Condition: used, Year of construction: 1986, x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 600 x 300 mm quill stroke 50 mm spindle taper ISO 40 spindle turning speed range 50-400 , 400 - 3150 U/min CNC-control TNC 135 Hnjdoxc Nwnepfx Ah Njg voltage 380 V / 50 Hz feeds X+Z = 5 -1000 mm/min rapid traverse X+Z = 2,4 m/min feeds Y = 5 -670 mm/min rapid traverse feeds Y = 1,6 m/min measuring system resolution capability 0,005 mm total power requirement 3,7 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 1,8 x 1,70 m • HEIDENHAIN TNC 135 control,

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Hedpfx Ahjgf H Sas Nong Chip conveyor Total power requirement 4 Kw Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Hnjdpfx Aertd Uwoh Njg Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: new, Bernardo Universal Turning Machine Master 360 Pro Peak 1000 mm Peak height 180 mm Orbital diameter via bed 360 mm Orbital diameter via creation * 502 mm Orbital diameter via paddling sled 220 mm Bed width 185 mm Spindle hole 52 mm Spindle intake A4 55029, D1-5 Speed range (8) 70-2000 U/min Area Longitudinal Pros (32) 0.052-1,392 mm/U Area of planning precurs (32) 0.014-0.380 mm/U Hsdpfx Ahod I H Izj Nsng Metric threads (26) 0.4-7.0 mm Customs thread (34) 4-56 Gg/1 " Pinol diameter 42 mm Pinoline path 100 mm Pinol intake MK 3 Engine drop-off power S1 100% 1.5 kW (400 V) Engine recording power S6 40% 2.2 kW (400 V) Machine Measurement (B x T x H) 1825 x 750 x 1600 mm Weight about 576 kg * Bed length removable: 205 mm Delivery • 3-axis digital display i200 with LCD display • 3-baking lining DK11-200 mm/D5 • Planboard 200 mm/D5, according to A4 55029 • Fixed bezel-passage diam. max 70 mm • Running bezel-passage diam. max 60 mm • Coolant equipment • First filling with Shell Tellus 46 • Extractable late newfir • Tension 280 mm • Quadruple steel holders • Protection device for quadruple steel holders • Slip clutch • Micrometer longest strike • Thread watch • LED machine light • Reducer sleeve • Changes • 2 centering tips • Foot pedal with braking function according to CE • Engine with magnetic brake according to CE standard • Unterdesigned with drawers • Operating tool

Condition: used, Year of construction: 1955, Technical details: turning diameter over bed: 420 mm turning diameter over support: 240 mm turning length: 1100 mm turning dia. in gap: 600 mm range of revolution per miute: 24 - 900 / 8 step U/min spindle bore: 41 mm range of feed in x - axis: 0,0120 - 0,1000 mm/U range of feed in y - axis: 0,0062 - 0,0302 mm/U tailstock quill taper MT: 3 tailstock quill adjustment: 220 mm total power requirement: ca. 4,0 (ohne Gewähr) kW Hnedpou Ix D Aefx Ah Nsg weight of the machine ca.: 1,2 t dimension machine xH: 2,3 x 0,9 x 1,3 m Equipment: 3-jaw chuck Ø 200mm Tool holder 4-way, swivelling 30° right/left T-slot for copying device Driving disc *

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice Hnedothd Shspfx Ah Njg E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Hnodpfx Aema Snxeh Njg

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Hnedpfx Ahsxftqdo Neg Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: excellent (used), honing diameter 1,5 - 165 mm stroke 80 - 160 mm spindle turning speed range 200 - 2500 U/min stroke speed - under load 80 - 310 Hub/min total power requirement 0,9 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 1,0 x 1,6 m Hnodpswva Rnefx Ah Njg

Condition: used, Year of construction: 2003, x-travel:930 mm y-travel:400 mm z-travel:406 mm turning speeds:9-6750 1/min Hnodpjt U Rm Isfx Ah Nog table::1370 x 254 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,15 mm/U bore capacity in steel:32 mm feed range:19 - 890 (x) mm/min spindle cone:SK 40 column arm:200 - 680 mm total power requirement:4 kVA weight of the machine ca.:1,15 t dimensions of the machine ca.:1,5 x 1,45 x 2,2 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)