Used Maho Mahomat 600 for sale (450)

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 CNC Control: Heidenhain TNC 530 with DMG-specific MillPlus IT user interface Spindle taper: SK40 Operating hours: 54,981 h Travel distances: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Dcodpfx Aoxxamxjkcjg Additional equipment: NC rotary table (Nikken) Large NC rotary table Tailstock Handwheel Inspection An inspection under power can be arranged at any time by appointment. Condition: Used condition consistent with age and prior usage Known defects: X-axis ball screw worn / overhaul required Y-axis suspected cable or motor damage Repairs completed: 2017 – Handwheel retrofit kit 2022 – Replacement of chip conveyor auger 2024 – New cylinder/ linear guide for tool magazine 2024 – New screen Further defects cannot be ruled out Important note / exclusion of liability The machine is explicitly sold as defective, without warranty, without guarantee and under exclusion of any liability for material defects. All technical information has been provided to the best of our knowledge but is non-binding. No liability is assumed for completeness, correctness, or up-to-dateness of the information. The sale is made as inspected and any subsequent negotiations are excluded.

Condition: excellent (used), Year of construction: 2010, operating hours: 13,362 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Siemens 810D, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, overall weight: 4,250 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 13,362 h, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2010 - Condition: good, used - Control: Siemens 810D - Table: 1200 x 560 mm - Travels: 1,035 x 560 x 510 mm - Spindle speeds: 20 - 8,000 rpm Dsdpoyf Hymofx Akcocg

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine Deckel Maho DMU 80 T Control: Heidenhain TNC426 Spindle speed: 20-6300 rpm Feed rate X, Y, Z: 20-10000 mm/min Rapid traverse X, Y, Z: 15000 mm/min Work envelope: X: 800 mm, Y: 650 mm, Z: 550 mm Tool holder: SK40 DIN 2079 Draw bolt DIN 69 872 Tool changer: Dsdpfx Akox Tapfecscg 25 positions Max tool diameter: 160 mm Max tool extension from spindle nose: 315 mm Work table: Dimensions: 1100x600 mm T-slots: 9 x M14 Permissible workpiece weight: 500 kg Transport data: Weight: 5800 kg Dimensions (L x W x H): 3.05 x 2.40 x 2.45 m

Condition: used, Year of construction: 1975, Universal milling machine MAHO MH800, year approx. 1975 Spindle mount ISO 40 Djdpfxeyvr Eqo Akcecg X-800 mm with universal table. Y axis feed not working? Weight approx. 3 t. Machine documentation available.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 79,500 h, functionality: fully functional, machine/vehicle number: 11710000713, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, controller model: HEIDENHAIN iTNC 530, workpiece weight (max.): 600 kg, The machine spindle was replaced according to DMG in 2022. A measurement protocol for the machine is included! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 700 mm Travel Z-axis: 700 mm Spindle speed: 18,000 rpm Spindle torque: 110 / 84 Nm Spindle power: 34 / 28 kW Tool holder: SK 40 Tool changer: 180 positions Pallet size: 500 x 500 mm Max. workpiece weight: 600 kg Rapid traverse: 60 m/min MACHINE DETAILS Dcedeyvp Dkopfx Akcog Control: HEIDENHAIN iTNC 530 Total connected load: 68 kVA Dimensions & Weight Space requirements: 9.5 x 7.5 x 3.4 m Machine weight: 10.5 t Operating Hours Spindle hours: 79,500 h Power-on hours: 112,000 h EQUIPMENT NC rotary table RS 10 pallet rotary storage, total of 12 pallet stations iTNC operator panel for the loading station ICS 40 bar (production package) Through-spindle air blast BA 4 2/4 hydraulic clamping for worktable and set-up station BLUM laser (prepared) Oil mist separator TS 649 probe Mechanical tool breakage detection SDS (Spindle Diagnostic System) Rinse gun Electronic handwheel Chip conveyor

Condition: ready for operation (used), DMU 50V XYZ 500x380x380 Motor 15 kW 15000 RPM Table 800x480 24 tools Dimensions 2450x1800x2384 mm Dodpfx Asyyqu Sekcscg Weight 4000 kg Spindle new in 2026 Still in production

Condition: good (used), Year of construction: 2004, functionality: fully functional, Universal machining centre Deckel Maho DMU 50 M with Heidenhain TNC 310 CNC control. Swivel-rotary table, SK 40 spindle taper with hydraulic drawbar. In good working condition, can be inspected under power. Dcodjytpy Espfx Akcog

Condition: used, Year of construction: 1979, functionality: fully functional, Infinitely variable feed motor and rapid traverse motor from milling machine MH 800P Dcjdpfx Aksyyap Sjceg

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg Dcedpsyu Twkefx Akcsg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Dsdpfx Ajyuzg Hekcocg Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Direct from toolmaking department: DECKEL MAHO DMU 50 – year of manufacture 2005 – Heidenhain iTNC 530 – 3-axis machine – travels X500 x Y450 x Z400 – SK40 – 8000 rpm – without WW – low operating hours, used only as a standby machine, extremely stable and in top condition, also very well suited as a training machine, minimal space required: 1.70 m wide x 2.00 m deep, for sale only due to lack of space, machining test and geometric measurement welcome. Ex works, free loading. Dcodpfx Akeyxy Rtecjg

Condition: used, Year of construction: 1993, Table size: 800x400 mm Dedpfxswtdv As Akcecg Including accessories, various holders

Year of construction: 1986, condition: good (used), CNC milling machine MAHO MH 800 E year of construction 1986 half cabin Technical data: X-axis travel 800 mm travel Y-axis 450 mm travel Z-axis 500 mm spindle mounting ISO 40 spindle speed 63 - 3150 rpm rigid angular table 1200 x 620 mm feeds X, Y and Z 1 - 1500 mm/min rapid traverse X-axis 4000 mm/min rapid traverse Y-axis 2500 mm/min rapid traverse Z-axis 3000 mm/min drive power 5,5 kW weight approx. 4000 kg Dsdpfx Akjig E Thjcocg outer dimensions approx. 2600 x 2600 x 2200 mm with - Philips 432 screen control - rigid angle table - documents available function untested

Condition: repair required (used), Maho MH 900 C Dcjdpfxsfgg Aao Akcog without housing Control: CNC 432 (V9) - working range X/Y/Z: 1000mm/500mm/650mm - Rigid angle table: 1150mm x 650mm - Maximum table load: 900 Kg - Spindle mounting: SK50 - Speed: 40 - 1600 rpm - Feed rate: 5 - 2.000mm/min - Rapid traverse: 6 m/min - Space requirement: L-3500mm, W-4185mm, H-2146mm Y-axis is not displayed but moves

Condition: used, Year of construction: 2009, x-travel 1.800 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 25 / 35 kW max. Torque 130 / 87 Nm tool taper HSK A63 DIN 69893 swivellable B: +/- 100 ° table surface area 2.100 x 700 mm max. table load 1.500 kg number of T-slots 7 table diameter 750 mm max. table load 500 kg number of T-slots 7 rotatable C: 360 ° number of toolpositions 30 pos. tool taper HSK A63 DIN 69893 max. tool weight 6,0 kg max. tool diameter 80 mm Djdpfx Akoyhhtgscjcg max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time chip to chip 7,6 sec rapid traverse ( X / Y / Z ) 40 m/min Accelaration 4 m/s² feed speeds max. 40.000 mm/min Feed force ( X / Y / Z ) 8 kN total power requirement 70 kVA weight of the machine ca. 13,0 t dimensions of the machine ca. 7,0 x 6,2 x 2,8 m 5-Axis CNC - Travel Column Milling Machine DECKEL MAHO - DMF 180 New Design - Swivel-Head (B-Axis) - integrated rotary-table - internal coolant system - Operating-Hours: Spindle-Runtime: ca. 10.000h

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Very nice Deckel Maho FP1 From the latest model! Comes from a toolmaking workshop. UNIQUE MACHINE Dodpfx Akeywlakscocg With feed on the Y-axis.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 42,368 h, General Data Machine weight 6800 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 640 mm Dsdpfx Asx D Ntfskcecg Y-Axis Movement 600 mm Z-Axis Movement 500 mm This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2003. It features a 640 mm X-axis, 600 mm Y-axis, 500 mm Z-axis, and a table size of 850 x 600 mm. Equipped with a Heidenhain iTNC 530 control unit, SK40 taper, and a tool magazine with 30 tools capacity. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64 V linear vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, operating hours: 69,995 h, Control Unit Brand HEIDENHAIN TNC 530 Main Drive Number of axis 3 Movement X-Axis Movement 885 mm Y-Axis Movement 600 mm Z-Axis Movement 600 mm Dodpfxox D Iuus Akcecg Table Table load 600 kg This 3-axis DECKEL MAHO DMC 75 V Linear was manufactured in 2005. It features a travel range of 885 x 600 x 600 mm and a maximum feed speed of 90 m/min. The machine includes a high-capacity coolant system and an efficient scraper belt conveyor for swarf disposal. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 75 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,900 h, General Data Machine weight 6800 Main Drive Spindle speed range 12000 Movement Dcjdpfjx Stl Dsx Akcog X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm Table Outer length 850 mm Outer width 600 mm This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2005. Ideal for precision machining, this vertical machining center offers robust performance and reliability. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64V linear vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand HEIDENHAIN Model na Movement X-Axis Movement 500 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Dcedpfx Aksx D Dukecjg This DECKEL MAHO DMU 50 T was manufactured in 2002. It features a spindle mount of SK40 DIN69871, a table size of 700x500 mm, and a maximum RPM of 9000. Ideal for versatile machining tasks. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, General Data Machine weight 6500 kg Measurements height 2500 mm Dimensions Machine Length 2800 mm Main Drive Number of axis 3 Dodjx E Ef Aepfx Akcjcg Spindle Speed 8000 RPM Spindle motor power 7.5 kW Movement X-Axis Movement 1000 mm Z-Axis Movement 600 mm Y-Axis Movement 600 mm This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2002. It features a spindle speed of 8000 rpm, a 24-pocket tool magazine, and a robust 6500 kg construction for stability. The compact design allows for efficient use of workshop space, while the high load capacity of 800 kg supports a variety of applications. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 103 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Dodpfx Akoyk S Hpjcscg Manufacturer: DECKEL MAHO Model: DMU 70VL Year of manufacture: 2001

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. Dcodpox D Epcefx Akceg • Tool magazine: 20 stations • Table size: approx. 790 × 560 mm Additional equipment • 3D probe • Coolant: external coolant supply only (no through-spindle/internal coolant) • Chip conveyor: not included Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis DECKEL MAHO 64 V linear was manufactured in 2002. It features an SK40 tool holder and a 30-tool automatic tool changer. The machine includes a paper band filter. Note, the probe requires servicing due to a communication error. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO 64 V linear machine we have for sale. Contact us for more information. • ATC capacity: 30 tools Additional equipment • Paper band filter (coolant filtration) • Probe (needs service; communication error) Dedjx D E Hhopfx Akcscg Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,800 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, number of axes: 5, This 5-axis DECKEL MAHO DMP60S was manufactured in 2003, featuring a vertical machining center with X, Y, Z travels of 760 mm, 460 mm, and 560 mm respectively. It includes a NC rotary axis, NC swivel milling head, and a tool magazine with 60 positions for HSK-A 63. Additional features include an internal coolant supply and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMP60S vertical machining center. Contact us for more information about this machine. • Axes: A-axis NC rotary axis, B-axis NC swivel milling head, V-axis (6th-side machining) • Tool magazine: 60 positions, HSK-A 63 • Coolant: internal coolant supply Additional equipment • Chip conveyor • Tailstock • Bar feeder Dcodpfx Asyglqtokceg