Used Magnetic Clamping Table for sale (23,501)

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine tussen de kolommen: 2550 mm!! 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Rsdpov Sfkasfx Adaen Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: used, cutting length (max.): 3,000 mm, cutting width (max.): 1,250 mm, cutting height (max.): 130 mm, saw blade diameter: 400 mm, table length: 3,000 mm, total length: 3,200 mm, total width: 2,000 mm, total height: 1,800 mm, main saw diameter: 400 mm, overall weight: 1,200 kg, slide length: 3,000 mm, rotational speed (min.): 4,000 rpm, rotational speed (max.): 6,000 rpm, power: 5.5 kW (7.48 HP), space requirement length: 3,200 mm, space requirement width: 2,000 mm, space requirement height: 1,800 mm, sliding table length: 3,000 mm, Equipment: scorer, No. 04518 Sliding table saw Martin T 60 CLASSIC Used, only 130 operating hours Motor power main saw 5.5 kW Sliding table 3000 mm long Saw blade size 250 - 400 mm diameter Cutting height maximum 130 mm Saw blade tilt motorized 0° - 46° Saw blade change with quick clamping system SprintLock Speeds 4000 / 4800 / 6000 rpm Speeds are determined by the position of the V-belt 2-axis scoring unit pneumatically controlled (Please note: On the video the scorer is not connected to compressed air, therefore you cannot see any height adjustment, but the function is given) Cutting width approx. 1250 mm Control PowerPC Operation via touchscreen Control for cutting height, cutting angle, scoring unit Digital display for cutting height, cutting angle, cutting width Suction connection 120 mm diameter at the bottom, 80 mm diameter at the top of the protective hood Cross table 1300 x 650 mm LW Edging ruler with 2 stops, extendable up to 3200 mm, swivels according to scale Protective hood arm can be swiveled away Complete technical documentation available Including various equipment and tools Transport dimensions approx. 3200 x 2000 x 1800 mm LWH Weight approx. 1200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Rjdjygav Rjpfx Adajn Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Location: Supplier Rsdpfsxta Dysx Adasn

Condition: used, Year of construction: 2016, Automatic cutting table system for textile and leather Manufacturer: Atom Model: FlashCut Easy 222 Rsdpfeyf Euijx Adasn Year of manufacture: 2016 CNC control Usable cutting/table area: 1,000 x 600 mm Maximum cutting height: 20 mm Static vacuum table with 1-zone fixing High-performance vacuum turbine with 4 kW power Servo drive for X, Y, and Z axes Safety device with light barrier monitoring and emergency stop switch 1 high-intensity projector Vacuum power: 4 kW Power rating: 6.5 kW 380 volts, 3 phases, 50 Hz Compressed air: 6 bar, 200 l/min (when using pneumatic tool attachments) 9 bar, 400 l/min Machine dimensions: 1,600 x 1,235 x 2,190 mm Weight: 440 kg 30126

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Redpfxox A Hfve Adaen Max feed speed: 40 m/min

Condition: excellent (used), 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Rsdpfxsyftzkj Adajn Data input via membrane keypad Electronic scoring unit adjustment Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Condition: used, Year of construction: 1996, Incl. 3-roller feed, control panel on top, table extensions, pull-out support, tilting from -5° to +45°. Location: supplier Rsdpfxeyfp N Re Adajn

Condition: good (used), Clamping table, clamping angle, dividing head, rotary table, milling machine table, rotary dividing table -Rotary table: clamping surface: Ø 120 mm -Groove width: 14 mm -Dimensions: 210/160/H140 mm Rjdpfxjwuybke Adajn -Weight: 5.7 kg

Condition: used, Year of construction: 2004, total length: 3,200 mm, total width: 2,150 mm, total height: 2,050 mm, - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 04-03-2 - Main motor power [kW]: 7.5 - Roller table length [mm]: 3000 - Table width [mm]: 1450 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 115 - Voltage [V]: 400 - Current consumption [A]: 15.5 - Power [kW]: 7.5 - Transport dimensions: 3200mm x 2150mm x 2050mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Rjdpeyfn A Aefx Adaon Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, NEW OVERBAND-MAGNET FOR MOBILE MACHINES DOPPSTADT, KOMPTECH ETC. - dimensions of the magnetic block: length 1440 mm x width 530 mm x height 256 mm - with hydraulic motor suitable for your machine Rjdpfxoyfguwj Adasn FAST DELIVERY

Condition: new, Year of construction: 2026, ++++our new product line MetalSelect++++ NEW OVERBAND-MAGNETS QUALITY PRODUCTS MADE IN EUROPE 500 TO 1500 MM WIDE 1 YEAR WARRANTY Rjdpfx Adsyffbpsaon FAST DELIVERY ATTRACTIVE PRICES ++++ASK FOR OFFERS++++

Condition: good (used), - Magnet with hydraulic motor for HAMMEL NZS 700 D - supply without belt or optionally with ne belt Redpfjyfd U Isx Adasn - Dimensions of the magnetic block: 125 x 125 cm

Condition: used, Year of construction: 1996, total length: 2,800 mm, total width: 1,700 mm, total height: 1,550 mm, Weight: 950 kg - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 96-03-537 - Main motor power [kW]: 4.0 - Roller table length [mm]: 2800 - Table width [mm]: 1600 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 315 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 75 - Manually adjustable axes: Cutting height, Tiltable - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 Rsdpfxjyfd Rve Adajn - Voltage [V]: 400 - Current consumption [A]: 8.5 - Fuse [A]: 16 - Transport dimensions: 2800mm x 1700mm x 1550mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Rodpfx Adotqfhxsajn Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: used, Panel Saw Martin T 60 German quality product Heavy-duty precision panel saw 5.7" touchscreen axis positioning control Swiveling control panel above the table Saw blade tiltable 0 - 46° Motorized blade tilt and height adjustment Automatic scoring unit Motor 5.5 kW Saw blade diameter up to 400 mm Rip fence table length 3000 mm Cutting width with parallel fence 1250 mm Parallelogram cross table, tiltable to both sides up to 46°, LCD displays, 0.01° fine adjustment for cutting angle Width fence adjustment from the front using handwheel on precision guides Width fence reading via touchscreen CE certified Machine is WORKSHOP TESTED and in TOP CONDITION Rjdpfeydmm Rsx Adajn Available ex-stock Lieboch

Condition: used, Year of construction: 2018, total length: 5,000 mm, total width: 1,500 mm, total height: 1,650 mm, Price: On request Redex Igayopfx Adajn - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1408 - Max. cutting length [mm]: 3800 - Max. cutting height [mm]: 95 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 125 - Controlled axes: Tiltable, Rip fence - Electrically adjustable axes: Rip fence, Tiltable - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 19 - Transport dimensions: 5000mm x 1500mm x 1650mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2015, total height: 1,700 mm, total length: 2,000 mm, total width: 2,050 mm, Weight: 850 kg - Year: 2015 - Documentation available: No - CE certificate present: No Rjdpfx Adjydldbjaon - Serial number: 30031501 - Main motor power [kW]: 9.2 - Arbor saw blade diameter [mm]: 30 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 400 - Table length [mm]: 1800 - Table width [mm]: 1790 - Adjustable angle: Manual - Max. adjustable angle [°]: 40 - Voltage [V]: 400 - Fuse [A]: 20 - Power [kW]: 9.2 - Transport dimensions: 2000mm x 2050mm x 1700mm (l x w x h) - Transport weight [kg]: 850kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Code: 0285 Brand: ALTENDORF Model: F 45 - CE Standard Panel saw with tilting blade and scoring unit for precise cutting of wood materials, furniture, custom furniture, window frames , doors, panels, plastics, composite materials, aluminum and various - CE Standard Technical data: Aluminum carriage length mm 3200 Hydrualic blade lifting and tilting with foot pedal operation Cutting width parallel guide mm 1300 Max blade diameter mm 400 F30 Cutting height with blade at 90° mm 125 Cutting height with blade at 45° mm 90 Motor Kw 5,5 Electrically adjustable in height and width scoring unit - Blade diameter mm 120 - Motor Kw 0,75 Digital display of the number of revolutions Digital display of the degree of inclination Speed rpm 3000/4000/5000/6000 Control elements on both sides of the carriage Worktable extension Register ‘DUPLEX’ for making square cuts from 0 to 90° with high precision and continuous adjustment Parallelogram protective cover Overall dimensions of assembled machine: mm 3300 x 3200 x 1450 h Overall dimensions for transport: mm 3300 x 2000 x 1450 h Rsdpfoydk Rtjx Adajn Weight kg 1000

Condition: ready for operation (used), For sale is a Nikken CNC 400 rotary table in very good condition! It is configured for a Mazak M32 control but can be adapted as needed. Table diameter: 400 mm. Dimensions (L/W/H): 740/240/420 mm. If you have any further questions, feel free to contact me. Rjdpeya Dtmjfx Adaon

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 3,800 kg, empty load weight: 1,123 kg, opening width: 1,525 mm, Roll clamp Load center: 760 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Operational and fully functional Technical Condition: Very good Redpfeydf Rujx Adaen Description: In addition to this device, we offer a wide range of forklifts and warehouse equipment. All our units are inspected and certified in accordance with FEM4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are also interested in purchasing your used equipment, even if you do not buy a machine from us. Lease-purchase and financing options are available upon request at attractive terms. We are happy to provide you with knowledgeable and comprehensive advice on our vehicles.

Condition: excellent (used), For sale: Gaussmeter MAGSYS HGM09s from the renowned manufacturer MAGNET SYSTEME (MAGSYS) – a professional magnetic field meter designed for industrial, service, and laboratory applications. This device is used for precise measurement of magnetic induction (mT / mG) and is widely used in quality control, maintenance, diagnostics of magnetic separators, magnetic grippers, permanent magnets, as well as laboratory applications. — Technical condition • Fully functional equipment, powers on correctly • Clear display, responds to magnetic field • Normal signs of use • No information on current calibration (user calibration may be required if necessary) Rodsydfvkspfx Adaon — Included in the set • MAGSYS HGM09s gaussmeter • 2 MAGSYS magnetic probes • Complete cabling • USB memory stick • Original transport case • Exactly what you see in the photos — Main features • DC magnetic field measurement • Units: mT / mG • Functions: AUTO, HOLD, ZERO (NULL), manual/automatic ranges • Data logging and retrieval capabilities • Robust, industrial-grade construction • Suitable for B2B / laboratory applications — Applications • Maintenance • Industry and manufacturing • Quality control • Magnetic separators and systems • Laboratories and technical services

Condition: used, Conveyor belt, belt conveyor, magnetic conveyor belt NEUHÄUSER Type 1700 x 50 / 1,060 + 110S Year of manufacture: approx. 2003 Usable length: 1700 mm Belt width: 50 mm Belt length: 3700 mm Aluminium frame profile cross-section H x W: 60 x 80 mm Roller diameter drum motor: 110 mm Roller width drum motor: 250 mm Belt speed: approx. 30 m/min. Motor power: 0.22 kW Redpfxsxcbppe Adajn Power connection: 400 Volt, 50 Hz - Drive via drum motor BDL Type 110S - Magnetic rail under belt conveyor - Belt body made of aluminium system profile with 12 mm slot - 1 piece conveyor belt NEW 3700 x 50 mm - Front frame profile slightly damaged (see photo), no impact on function - Guide at front reversing roller broken off (see photo) Overall dimensions L x W x H: 1820 x 370 x 120 mm Weight: approx. 30 kg

Condition: new, Year of construction: 2024, Protec welding rotary table 20000 Kg load capacity Rjdpfxeid Szke Adasn speed infinitely variable 0,05 - 0,35 rpm Hand remote control foot remote control extra charge 390.-€ height 700mm diameter 2000mm

Condition: used, Year of construction: 2000, overall weight: 260 kg, table diameter: 70 mm, Rotary Table Redpfx Asyddivodasn Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), functionality: fully functional, LANG MAKRO-GRIP 5-axis vice No. 46160 Clamping range: 0–160 mm 12 units available Additionally: 1 x LANG clamping device trolley Capacity: 60 positions Rodpfxsydc Udj Adasn