Used Magnetic Clamping Table for sale (23,780)

Condition: good (used), machine/vehicle number: 21494, OFFER 21494 Technical data: - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm Lsdpfx Aohii R Dod Nohb - Circumferential water channel - 3 pieces T - grooves M 16 L 900 mm - lateral flange plate - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg

Condition: good (used), OFFER 21100 Technical data: - Table dimensions approx. 1700 x 1700 mm Lhodpfxsgmnkns Ad Njb - side length approx. 700 mm each - welded steel construction made of flat steel 100 x 30 mm - table height approx. 850 mm - table surface approx. 2,3 qm² - various clamping tools - weight approx. 1500 kg

Condition: good (used), total height: 350 mm, overall weight: 5,000 kg, total width: 1,500 mm, table height: 350 mm, total length: 4,200 mm, Used clamping table 4200 x 1500 x 350 mm Weight approx. 5000 kg Lodpfx Asuzaafod Nshb

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm Lhedpfxsthuzpe Ad Nsb - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Back grinding device with permanent magnetic chuck JUNG type HA 20 Device No.: 3344 Profile depth: max. 15 mm Angle adjustment: 0° to 2° Magnetic plate: 115 x 115 mm Ledpfxjdz Sqxo Ad Nshb Clamping range: 110 x 75 mm Magnetic plate height: 119 mm Workpiece dimensions L x W x H: max. 60 x 100 x 50 mm Power input: 1 ampere Operating voltage: 24 volts DC (V/DC) - Mechanically switchable permanent magnet Dimensions L x W x H: 500 x 200 x 125 mm Weight: 25 kg Good condition Suitable for tool & die making for tapered, back-ground cutting plates or mold inserts.

Condition: used, Clamping plate, machine table with metal base Lhedpowkvi Nofx Ad Nsb Clamping table, assembly table, clamping angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg good condition

Condition: used, Clamping table, sine table, tilting table Tilting clamping table Table length: 1130 mm Table width: 300 mm Table height: 112 mm Lhsdpfxsinldps Ad Njb Tilting angle: 2° Tilting angle max.: 7° - Tilting angle 2° via leadscrew - Max. tilting angle 7° manually lifted to stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg Good condition Clamping plate, ideal for production of wedge strips

Condition: used, Round clamping plate with T-slots Straightening plate and clamping table Diameter Ø 1500 mm Centering bore Ø 80 mm Plate thickness 54 mm Working height 970 mm - 6 T-slots 18 mm - 3 threaded holes M20, pitch circle diameter 1000 mm - Steel base without central bore Weight 785 kg good condition Lhjdsv Ed Svjpfx Ad Nob

Condition: good (used), total height: 170 mm, total length: 3,000 mm, total width: 1,500 mm, Dimensions: 3000x1500x170mm Lsdpeth Smbofx Ad Njhb

Condition: good (used), total length: 26,000 mm, total width: 15,000 mm, Dimensions: 2600x1500x170mm Lodpoth Sb Nefx Ad Nshb

Condition: ready for operation (used), agnetic table, magnetic work table, used machine Overall dimensions: Length: 1500 mm Width: 500 mm Lhedpfx Adsu T H Nns Neb Height: 80 mm Weight: 420 kg Electrical specifications: 55V DC

Condition: used, table length 1105 mm table width 220 mm Plate thickness 30 mm weight ca. 300 kg dimensions 1105 x 220 x 150 mm T-slot - width 16 mm number of T-slots 1, Mitte total power requirement kW Lsdpod Ih T Aefx Ad Njhb weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Offer various marking plates, tool tables with the following dimensions and prices: Table 1 with feet: 2000 x 1000 mm, 1,200 kg, price € 1,600 Lhedpfjrm Tw Tox Ad Nsb Table 2 one leg missing: 2810 x 600 mm, 900 kg, price € 1,000

Condition: used, 1,180 x 990 mm height 765 mm clamping slots width 34 mm material thickness 40 mm Ledpohtv T Djfx Ad Nehb weight approx. 1,020 kg  

Condition: used, clamping surface 1,330 x 530 mm clamping surface 1,330 x 600 mm - with drillings Lhsdpfx Adethtn Ts Nsb material thickness 55 mm weight approx. 615 kg

Condition: good (used), Welding table with rotating device (self-construction) Plate 2000x1000mm Working height 640mm t=28mm Weight approx. 1500kg Device is screwed to plate! Device can be moved by motor by 500mm Lhjdpfxefhnv Ae Ad Nsb Total height approx. 1750mm length 2700mm

Condition: used, tank capacity: 1,350 l, GENERAL INFORMATION Design: Suspended Remarks: Various technical documents available; the tanks were suspended at the previous owner’s facility in a ring with load cells, which was embedded in the floor (one ring per tank is included in the delivery; see photos) Speed: 412 rpm External diameter: 1,250 mm Internal diameter: 1,000 mm Overall height: 2,650 mm Heating/Cooling: available Insulation: available Power rating: 0.75 kW Max. permitted operating temperature: 140 °C Max. permitted operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: Magnetic stirrer Location: Bremen Technical documentation: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,350 litres Double jacket volume: 80.0 litres Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,460 mm Last application: pharmaceuticals TANK Max. permitted operating temperature: 130 °C HEATING/COOLING JACKET Max. permitted operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil INSULATION Insulation material: mineral wool Lhsdpfxoxxiccj Ad Neb EQUIPMENT Manhole / access cover: in top head Discharge: present Discharge outlet: 50 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI 304) AGITATOR 1 Agitator manufacturer: MAVAG AG Voltage: 230/400 V Agitator arrangement: bottom mounted TECHNICAL DATA / DIMENSIONS Top head wall thickness: 4.5 mm

Condition: excellent (used), Year of construction: 2004, Total off 12 units available Lodpfx Aoxxkhysd Nehb

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 600 x 320 mm -T groove width: 12mm -T grooves: 5 pieces -Equipment: rotatable, pivotable, tiltable -Foot mount: 325 x 190 mm -Number: 1x tables available -Price per piece -Dimensions: 800/300/H240 mm Lodpfxodfv Iko Ad Nshb -Weight: 70kg

Condition: used, Year of construction: 2016, tank capacity: 6,000 l, GENERAL Equipment: Crane lugs Design: vertical Year of manufacture: 2016 Remarks: Manhole DN 600; outlet with bolted-on valve; no indication of double jacket acceptance in the inspection report (in a copy of drawing 1160246-1A / 1B there is a signed stamp 'Tested according to AD 2000 Code by TÜV Süd'); parts of the blind plugs may be available Speed: 495 rpm External diameter: 2,100 mm Internal diameter: 2,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 2,630 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: Magnetic stirrer Base type: Feet Location: Bremen Technical documentation: Drawing, TÜV certificates, statics, CE marking and declaration of conformity, operating manual Cylinder temperature control: Thermoplate Nameplate: Vacuum: 1.0 bar Volume: 6,000 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 1,400 mm Previous application: Pharmaceuticals VESSEL Max. permissible operating temperature: 135 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulating jacket: hermetically welded Insulation material: Armaflex Insulating jacket material: Stainless steel Insulation thickness: 50 mm Lhsdpfjxqawnsx Ad Nob EQUIPMENT Manhole/dome: in cylinder Outlet: 187 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: Stainless steel AGITATOR 1 Agitator manufacturer: Metenova AB Voltage: 400 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Agitator position: bottom Top wall thickness: 5.8 mm

Condition: used, Year of construction: 2019, tank capacity: 1,000 l, GENERAL Design: vertical Year of manufacture: 2019 Speed: 711 rpm Outer diameter: 1,120 mm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 2,100 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Lodpfxexqawbj Ad Njhb Agitator: magnetic stirrer Mounting type: mobile on casters Location: Bremen Technical documentation: drawing, various documents, inspection certificate, CE marking and declaration of conformity, operating manual Cylinder temperature control: Thermoplate Nameplate: Vacuum: 1.0 bar Volume: 1,000 liters Double jacket volume: 5.0 liters Cylinder wall thickness: 5 mm Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,000 mm Previous application: pharmaceutical VESSEL Max. permissible operating temperature: 135 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top head (DN 600) Outlet: 31 mm MATERIAL SPECIFICATION Temperature control system material: AISI 316 (V4A) 1.4404 Feet material: stainless steel AGITATOR 1 Agitator manufacturer: Metenova AB Voltage: 400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator arrangement: bottom Top wall thickness: 5 mm

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: 3 loose load cells (functionality not guaranteed) included in the delivery Speed: 394 rpm Outer diameter: 1,154 mm Inner diameter: 988 mm Total height: 2,600 mm Heating/Cooling: available Insulation: available Power: 0.75 kW Max. perm. operating temperature: 130 °C Max. perm. operating overpressure: 3.0 bar Max. overpressure: 1.99 bar Agitator: Magnetic stirrer Support type: Feet Location: Bremen Technical documentation: Drawing, various documents, acceptance certificate Lhodpfx Adoxqauyj Njb Jacketed cylinder: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,100 liters Double jacket volume: 122.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 875 mm Last application: Pharmaceutical TANK Max. perm. operating temperature: 130 °C Number of feet: 3 units HEATING/COOLING JACKET Base temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manway / dome: in top head (DN 500) Note: Metallic discolorations inside Outlet: 38 mm MATERIAL PROPERTIES Temperature control system material: V2A 1.4301 (AISI304) Feet material: Stainless steel AGITATOR 1 Agitator manufacturer: HANAG Steriltechnik AG Voltage: 220/380 Volt TECHNICAL DATA / DIMENSIONS Base wall thickness: 5.4 mm Agitator positioning: Bottom Top wall thickness: 4.5 mm

Condition: used, Year of construction: 2012, tank capacity: 100 l, GENERAL Equipment: Control cabinet (without guarantee) Design: standing Year of manufacture: 2012 Overall width: 1,000 mm Overall height: 1,750 mm Overall length: 900 mm Heating/Cooling: available Insulation: available Power: 1 kW Max. permissible operating overpressure: 5.0 bar Max. overpressure: 4.0 bar Top cover: removable / foldable top cover Agitator: magnetic stirrer Stand type: mobile frame Location: external storage Cylinder temperature control: double-jacketed Nameplate: Vacuum: 1.0 bar Volume: 100 liters Double-jacket volume: 20.0 liters Product-contact material: V2A stainless steel Condition: used Ledpfxsxqafxe Ad Nehb Last application: pharmaceuticals HEATING / COOLING JACKET Max. permissible vacuum: 1.0 bar INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FEATURES Manhole / dome: hand hole Discharge: available MATERIAL SPECIFICATION Temperature control system material: stainless steel AGITATOR 1 Agitator arrangement: bottom-mounted

Condition: used, Year of construction: 2014, tank capacity: 500 l, GENERAL Equipment: Control cabinet (without guarantee) Design: standing Year of manufacture: 2014 Remarks: Tank configuration (arrangement on the frame & connections/manhole in the top cover) may vary slightly Overall width: 1,050 mm Overall height: 1,750 mm Overall length: 900 mm Heating/Cooling: available Insulation: available Power: 1 kW Max. overpressure: 5.0 bar Top cover: removable / foldable top cover Agitator: magnetic stirrer Support type: mobile frame Location: external storage Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 500 liters Double jacket volume: 72.0 liters Product-contact material: V4A 1.4435 (AISI316) Condition: used Previous application: pharmaceutical industry Lhjdpfx Adsxqad Is Nsb INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole/dome: handhole Outlet: available AGITATOR 1 Agitator arrangement: bottom-mounted

Condition: used, tank capacity: 1,000 l, GENERAL Lhedpfx Adoxqar Ss Neb Equipment: Spray head Design: vertical External diameter: 1,300 mm Internal diameter: 1,100 mm Total height: 2,300 mm Heating/Cooling: available Insulation: available Power: 1.1 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Agitator: Magnetic stirrer Support type: Legs Location: Bremen Technical documentation: Drawings, TÜV papers, various documents Cylinder temperature control: Double jacket Name plate: Vacuum: 1.0 bar Volume: 1,000 liters Double jacket volume: 72.0 liters Cylinder wall thickness: 10 mm Wetted material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 1,000 mm Last application: Pharmaceuticals TANK Max. permissible operating temperature: 150 °C Number of legs: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation material: Mineral wool Insulation jacket material: Stainless steel EQUIPMENT Manhole/Dome: on top (DN 400) Outlet: available Outlet: 50 mm MATERIAL SPECIFICATION Temperering system material: V4A 1.4571 (AISI 316) Legs material: Stainless steel AGITATOR 1 Agitator manufacturer: Aprotec Voltage: 220/380 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.6 mm Agitator arrangement: Bottom-mounted Agitator documentation: Various technical documents for the agitator available Top wall thickness: 6.3 mm