Used Machine Center for sale (70,519)

Condition: used, Year of construction: 2008, Hurco VMX 30 T vertical machining center 3-axis Year: 2008 Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Fjdpez I Sx Nofx Akyjpn Accessories/options: - Coolant tank - Spindle coolant unit - Chip conveyor - Through spindle coolant - software options Under power in our warehouse.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 Fedpfjz Hxclex Akyjpn MACHINE DETAILS Control system: Heidenhain TNC 410 Workpiece clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various SK 40 tool holders Electronic handwheel Coolant system with high-performance pump Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: good (used), Year of construction: 2004, functionality: fully functional, Fully functional. 2 tables, 2000x1500 mm. 2 five-axis units, 13 kW. Fpsdpfsz Nwc Dox Akyjn Drilling unit. 2 vacuum pumps.

Condition: like new (used), Year of construction: 2006, operating hours: 671 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. Fpodpfszxz Dfsx Akysn The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, HolzHer 7023 K CNC machining center Year of manufacture: 2008 Power supply: 3 x 400 V Traversing system (beams and suction cups) with 6 beams, Tool magazine for 12 positions, 3-axis milling motor, Drilling head, Horizontal milling motor (for doors). Fjdpfx Akjz Nh Tgeyspn

Condition: excellent (used), The HOLZ-HER Evolution 7405 is a used CNC machining center for continuous processing. The machine enables four-sided edge profiling and is equipped with an integrated vacuum pump and automatic suction positioning. Workpiece machining: Workpieces with a length of 200 to 3,200 mm, a width of 70 to 920 mm, and a thickness of 8 to 70 mm can be processed. Hardened and dust-protected prism guides, as well as ball screw spindles on all axes, are part of the machine equipment. Milling and tool changing: The main spindle has a motor power of 6.5 kW and a speed range of 1,000 to 18,000 rpm. The main spindle has an HSK-F63 tool holder. The pick-up tool changer provides space for 6 tools. Fpedpfxjyrp Srj Akyen Drilling and sawing unit: The XL drilling head has 13 vertical drilling spindles, two horizontal twin drilling spindles in the X-direction, and one horizontal twin drilling spindle in the Y-direction. A sawing unit with a 120 mm saw blade diameter is integrated for grooves in the X-direction. Control and equipment: The machine is controlled via CAMPUS HOPS. The equipment also includes a network card for remote maintenance, an integrated control cabinet with control cabinet cooling via a heat exchanger, a handheld operating device, and an automatic central lubrication system. Extraction and connections: The extraction connections are 2 x 120 mm and 1 x 140 mm. A volume flow rate of 4,100 m³/h, a static negative pressure of 2,500 to 3,000 Pa, and an air velocity of 30 m/s are required. The compressed air connection requires 6 bar with a compressed air requirement of 300 l/min. Condition: The machine is offered as a used machine, has been inspected, and is ready for immediate use. Quality information: - complete basic cleaning - electrical system checked - pneumatic system checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: used, Year of construction: 2017, Control DMG MORI SLIMline x-travel 500 mm y-travel 450 mm z-travel 400 mm b-axis -5 / + 110 ° 360 ° table dimensions 630 x 500 mm rapid traverse 30 m/min turning speed range 20 - 12.000 U/min Drive power (40/100%) 13/9 kW tool taper SK 40 number of tool places 30 Pos. Number of working hours ca. 11.605 h spindle hours ca. 4.061 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Internal coolant supply (ICS) - Coolant spray gun Fodpfx Aksz I D Ameyjpn - Electronic handwheel - Direct position measuring system (X, Y, Z) - Renishaw probe kit - Oil and emulsion mist separator Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2882-0275, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller manufacturer: Deckel Maho, controller model: Dialog 112, workpiece length (max.): 1,250 mm, workpiece width (max.): 800 mm, workpiece weight (max.): 1,250 kg, total height: 2,900 mm, total length: 3,900 mm, total width: 4,100 mm, table width: 800 mm, table length: 1,250 mm, table load: 1,250 kg, rotational speed (max.): 8,000 rpm, overall weight: 9,100 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 10,000 W, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, For sale is a vertical CNC machining center, Deckel Maho DMC 100 V, manufactured in 1998. The machine is in good condition and fully functional. Technical specifications: Manufacturer: Deckel Maho GmbH Type: DMC 100 V Year of manufacture: 1998 Serial number: 2882-0275 Travel in X-axis: 1,000 mm Travel in Y-axis: 800 mm Fpedoz I R Eujpfx Akysn Travel in Z-axis: 700 mm Table size: approx. 1,250 x 800 mm Table load: approx. 1,250 kg Spindle speed: up to 8,000 rpm Tool holder: SK 40 Tool magazine: 30 positions Operating voltage: 400 V / 3-phase Rated current: 70 A Weight: approx. 9,100 kg If you are interested or have any further questions, please do not hesitate to contact us. Location: 30827 Garbsen.

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Wele Awea Machining Center Type AA1165 Fanuc Series 18i-MB CNC Year 2008 Chip Conveyor ✅ Documentation ✅ Video Available ✅ Fpedpfx Akjz N Tf Ieysn Inspection Possible ✅

Condition: used, Year of construction: 2014, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, controller model: Sinumerik, table width: 560 mm, table length: 1,200 mm, rotational speed (max.): 8,000 rpm, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, We offer this used DMG MORI DMC 1035V ecoline vertical machining center, manufactured in 2014. Factory number: 1539000738A Year of manufacture: 2014 Fjdpsz Iyv Asfx Akyepn X/Y/Z 1035 × 560 × 510 mm Table: 1200 × 560 mm Maximum spindle speed: 8000 rpm SK40 Sinumerik Spindle overhauled in June 2026 First owner Weight: 4500 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 500 mm, feed length X-axis: 750 mm, feed length Y-axis: 610 mm, feed length Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, torque: 100 Nm, controller manufacturer: HEIDENHAIN, controller model: TNC7, total height: 3,060 mm, total length: 4,204 mm, total width: 3,500 mm, table width: 600 mm, table height: 805 mm, table length: 750 mm, table load: 400 kg, rotational speed (min.): 100 rpm, overall weight: 9,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 650 mm, spindle motor power: 26 W, number of slots in tool magazine: 40, tool length: 250 mm, tool diameter: 80 mm, tool weight: 800 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Complete machine with a 5-axis rotary/tilting table with Torque motors Fodpfxjz Hnx Ae Akyepn - Optical scales for X/Y/Z axes - Direct encoders for B/C axes - HSK 63A electrospindle - High-pressure coolant system through the spindle, 20 bar - Chip evacuator - Electronic handwheel - Kinematic option - MARPOSS part cycle probe - Top cover - CE marking

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Siemens, workpiece weight (max.): 100 kg, total height: 3,030 mm, total length: 5,400 mm, total width: 6,265 mm, overall weight: 24,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 32,000 W, number of spindles: 2, number of slots in tool magazine: 100, Equipment: CE marking, chip conveyor, documentation/manual, type plate available, SAMAG MFZ 4-2W CNC twin-spindle machining center For sale: SAMAG MFZ 4-2W CNC machining center, currently in working order and available for inspection at our facility. The machine is ideal for high-productivity machining thanks to its twin-spindle configuration and has been maintained in good working condition. Fedjz Nlzzspfx Akyspn >Included in the supply: Spare electro-spindles Spare B-axis motors Spare W-axis motors Spare A1/A2 motors Machine documentation available (mechanical and electrical) >Main features: CNC twin-spindle machining center Year of manufacture: 2014 Machine in working order Inspection and testing possible on-site by appointment The inclusion of spare parts represents a significant added value, allowing for reduced time and costs for any future maintenance work. The system includes a chip extraction system for cast iron components from Knoll, complete with a filter mat for managing the emulsion for coated parts. Spindle mount: HSK-80 The 3D (step) model of the machine is also available for use with simulators. IMPORTANT: The machine will be sold without tooling, as it is specific to the components being produced! For further information, photographs, videos of the machine in operation, or to arrange a visit, please contact the seller directly.

Condition: used, Year of construction: 2017, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, workpiece length (max.): 900 mm, workpiece width (max.): 350 mm, overall weight: 500 kg, spindle speed (max.): 17,150 rpm, spindle motor power: 1,500 W, input voltage: 230 V, Very nice, compact milling machine for model and prototype construction, as well as small parts. Exceptionally well-maintained machine from model construction. ISEL EuroMod MP30 model Machine, manufactured in 07-2017 Travel ranges X/Y axes: 610/300 mm Z-axis stroke: 300 mm Table clamping surface: 900 x 350 mm Travel speed X/Y/Z: 15 m/min Machine dimensions: Width: 1205 mm Width with control cabinet: 1488 mm Depth: 845 mm Height (door closed): 2123 mm Height (door open): 2418 mm Control panel: iOP-19 touchscreen with keyboard and mouse CAN controller: iMD • Pneumatics: Integrated pneumatic air preparation unit from Festo with pressure regulator, manometer, and filter units. Fpsdpfxsz Nv Dyo Akyjn • Internal housing cooling: Cabinet climate/cooling unit mounted on the lower housing door. • Housing type: Fully enclosed aluminum profile housing with transparent sliding doors made of safety glass/polycarbonate and hazard warning signs.

Condition: ready for operation (used), Year of construction: 2007, Hurco VMX 30 T vertical machining center 3-axis Year: 2007 Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Fpjdpfx Akoz H Nvioysn Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories/options: - Coolant tank - Spindle coolant unit - Chip conveyor - software options Under power in our warehouse.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 8,950 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: HAAS, controller model: CNC Control, workpiece weight (max.): 680 kg, total height: 2,570 mm, total length: 2,570 mm, total width: 2,510 mm, table width: 356 mm, table length: 914 mm, table load: 680 kg, overall weight: 3,600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,950 h, spindle nose: CAT 40 / BT40, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The Haas VF-2SS is a compact, high-speed 3-axis vertical CNC machining center. The “SS” stands for Super-Speed. This machine is installed and operational at our location and can be inspected while running! This HAAS VF-2 SS is equipped with: - SS (Super Speed) version. - 24-tool magazine. Fpsdsz Nhphjpfx Akyjn - Internal cooling (IKZ). - Chip conveyor. - Renishaw OTS tool probe. - Renishaw OMP40-2 3D probe. - Programmable coolant nozzle. - Air blow gun. - Coolant tank. - Original documentation.

Condition: used, Year of construction: 2003, functionality: fully functional, Sale only within the EU. Without the pneumatic tensioning device! Dismantling and loading will be carried out by the seller. Transportation will be handled by the buyer. Fpodjz N Eakepfx Akyon

Condition: used, Year of construction: 2007, controller model: Ultimax, table width: 355 mm, table length: 760 mm, number of slots in tool magazine: 20, HURCO VM1 Vertical Machining Center Fodeyxcykspfx Akyopn The HURCO VM1 is a compact vertical CNC machining center, ideally suited for precise milling operations in single-part and small-batch production. The machine stands out for its robust construction, user-friendly control system, and efficient tool changing capability. Technical Equipment Worktable: 760 mm × 355 mm Equipped with machine vice CNC control: Ultimax Automatic tool changer with 20 tool positions Machine Condition and Design The machine features a fully enclosed safety cabin with large front windows. The control panel, including a display, operation keys, and emergency stop, is mounted on the side for ergonomic access. A chip collection tray is located beneath the working area. Thanks to its compact footprint, the HURCO VM1 is especially suitable for workshops with limited floor space, while still delivering high performance and flexibility.

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flushing through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Direct sale to end-users only. Fodpfx Akjzw Rl Aeyepn W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: good (used), Year of construction: 2025, functionality: fully functional, Sales from the location 97424 Schweinfurt Manufacturer: SPINNER Model: U5-630 Type: CNC machining center Year of construction: 2025 Used, with signs of wear, in good condition Technical data according to the manufacturer: Axes: 5 X-axis: 630 mm Y-axis: 530 mm Z-axis: 465 mm Milling spindle: 20,000 rpm Tool interface: HSK63 Tool magazine: 32 tool stations 2-axis swivel-tilt table D=650 mm in precision design T Rotary table diameter 650 mm Table load: 500 kg Swivel range B=-90° (-50°)/+110° Direct measuring system in B and C axes Hydraulic brake for swivel axis B and rotary axis C Direct measuring systems in X/Y/Z axes Fpsdpfx Ajz Iz Rhskysn HEIDENHAIN control system We will gladly provide further technical data and information upon request if you are interested in purchasing. The machining center is currently powered and can be inspected after scheduling an appointment. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2019, Various spare parts for Chiron BAZ Rotary tables Fpodpfsz I T Acsx Akyen Axles Ball screw and more

Condition: as good as new (ex-display), functionality: fully functional, The Format4 creator 950 in a wide range of equipment variants - your CNC machine for individual woodworking challenges. Efficient CNC processing at a fair price - this principle is at the heart of the creator machine series. All models are attractively equipped with the latest CNC technology and can be customized to meet specific requirements. The creator 950 is not only an easy and safe entry into the CNC world, but also serves to relieve your CNC machining centers. Your advantages at a glance: Concentrated CNC technology on a footprint of just 5 m² All-inclusive: 4-sided formatting as standard Get started right away: Maximum productivity without set-up times No suction cup and console positioning Fedpfx Akju Eg A Usyjpn Use from interior fittings to room doors Traditional processing from above - extremely simple loading Intuitive control via control panel Easy to understand software Best suction result High-end at the best price in every configuration Carcass processing with Lamello Clamex-P Additional equipment: C19 2nd stop reference cylinder for long workpieces C71 Folding support tables front+rear - roller table C198 Pick-up space for tool and unit change C200 4-fold linear changer for use of units C233 Holder for crane transport C490 F4design (incl. 3-axis PP) 800 E-Learning F4Design Creator processing field: Travel of the axis X= 1475mm (bracket) Y=1550mm Z= 225 mm Working field X= 3500 mm (infinite) or 130 kg maximum load Y= 950 mm Z= 80 mm Machinable workpiece Equipped with: High-performance PC 24" LED color display Keyboard, mouse and mouse pad 1 USB interface

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, 4-axis machine X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Control system: Heidenhain TNC 426 Fedpfx Akjz Izc Doyjpn Spindle nose: 100-700 mm Work table: 1,080 x 580 mm Maximum workpiece weight: 550 kg T-slots: 7 T-slot width: 14 mm Tool magazine with: 36 positions Maximum tool weight: 8 kg Maximum tool length: 340 mm Machine weight (approx.): 6.2 t Space requirement (approx.): 4,790 x 5,330 x 2,905 mm

Condition: good (used), Year of construction: 2019, operating hours: 18,400 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 700 mm, total height: 2,700 mm, total length: 6,335 mm, total width: 4,600 mm, table load: 1,500 kg, overall weight: 16,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 20 rpm, operating hours of spindle: 11,370 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Travel ranges & dynamics • X-axis: 2,600 mm • Y-axis: 700 mm • Z-axis: 700 mm • Rapid traverse rate / feed rate: 40 m/min Work table (fixed table) • Clamping area: 2,900 x 700 mm • Max. table load: 2,150 kg Milling spindle (standard configuration) • Max. speed: 15,000 rpm • Drive power (40% duty cycle): approx. 18.9 – 20 kW Fpjdpfx Akoz Indhsysn • Tool holder: SK 40 Tool magazine • Tool positions: 30 • Max. tool length: 300 mm

Condition: like new (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, torque: 115 Nm, controller manufacturer: Fanuc, total height: 2,750 mm, total length: 2,200 mm, total width: 2,360 mm, table width: 500 mm, table length: 900 mm, table load: 500 kg, overall weight: 6,400 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, Year of manufacture: 2013 CNC Fanuc TABLE Table size: 900 x 500 mm Five T-slots: 18 H 8 mm Maximum permissible weight on the table: 500 kg WORKING CAPACITY X-axis: 700 mm Y-axis: 530 mm Z-axis: 560 mm Spindle nose – table surface distance: 150 / 710 mm Spindle axis – column surface distance: 550 mm SPINDLE Spindle diameter: 70 mm Spindle taper connection Big Plus: ISO 40 DIN 69871 Spindle speed: 50/12,000 rpm Spindle motor: 15/11 kW Maximum torque: 115 Nm FEED RATES Rapid traverse rates for X/Y/Z axes: 32 m/min Fpsdpfxezr Uq Se Akyjn Working feed rates: 20 m/min TOOL MAGAZINE Number of tools: 30 Tool taper: ISO 40 Maximum tool diameter (without adjacent tools): 76 / 125 mm Maximum tool weight: 7 kg MACHINE DIMENSIONS Height: 2,750 mm Footprint: 2,200 x 2,360 mm Weight: 6,400 kg Machine complete with: •Presetter •Probe •Vise •Tool cabinet •Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 5,800 h, power: 60 kW (81.58 HP), travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, workpiece height (max.): 1,400 mm, workpiece weight (max.): 2,000 kg, number of axes: 4, controller manufacturer: Siemens, controller model: 840D SL, torque: 1,146 Nm, rotational speed (max.): 8,000 rpm, Equipment: CE marking, documentation/manual, Machine name / type: HELLER / H 8000 Operating hours: 5800 Year of construction: 2020 Control unit: Siemens 840D SL Spindle: EPC-Unit (8.000 1/min, 60 kW, 1146 Nm) Tool clamping system: HSK 100 Tool magazine / places: Chain / 100 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 600, IKZ 70 bar, (work area flushing) Fpjdpfx Aksu Urgbeyjn Positioning range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options / Specifics: multi-spindle-head support (MSK); receiver for measuring probe (RENISHAW); fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; codechip; Chip conveyor function check; Integrated process monitoring (IPM) + Monitoring function to minimize machine damage in case of collision; 3 colour status lamp; increased tool weight 35kg; scraping conveyor for wet machining; Coolant temperature control; Feed force display; Tangential control;