Used Longitudinal Welding for sale (7,756)

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 92420 353324 -Horn: Type 2.0 Bdedpfsyxm Rajx Ab Isa -Ultrasonic sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H120 mm -Weight: 6.1 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 92420 353324 -Horn: Type CTC205708 -Ultrasonic sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H83 mm -Weight: 4.6 kg Bdodpfx Abeyxm Ixs Ija

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 see photos -Number: 3x ultrasound transducer units available Bdedpfsyxm Hnjx Ab Ija -Price: per piece -Dimensions: 450/100/H145 mm -Weight: 15.7 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 see photos -Number: 3x ultrasound transducer units available Bdodexyw H Eepfx Ab Iea -Price: per piece -Dimensions: 450/100/H70 mm -Weight: 4.8 kg/pc.

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Bdodpeunh Uvjfx Ab Isa Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Condition: excellent (used), Year of construction: 2013, operating hours: 150,494 h, functionality: fully functional, GRAF welding and cleaning line, year 2013. Working direction from left to right. SL4U four-head welding machine, max. dimensions 2800 x 3200 mm, min. 2400 mm, flash 0.2 mm. WP CNC 2 TR cleaning machine. Cooling station. Knives for cleaning flat, grooved and smooth surfaces. Bdodpoyyxvwsfx Ab Ioa

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: water, welding current (max.): 400 A, Used – Esab Origo Mig 4002cw – Water-cooled MIG/MAG 3 Months Warranry Refurbished, tested, serviced, and ready for immediate use Specifications: 400 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Digital display Program memory Elektrode option Including: Bdodpfxjyyuzve Ab Ija SB501W Welding torch, earth work cable, gas cable, and 1 meter interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2019, bar material dia. 32/38 mm spindle passage 44 mm turning length 320 mm turning speeds 200-8000 U/min c-axis 0,001 Grad gripping station 32/38 mm turning length 120 mm turning speeds 200-8000 U/min c-axis 0,001 0 number of tools 13 fix number of milling stations 4+5 driven control Mitsubishi Meldas M70 Number of axles 5+2 St. total power requirement 7,5 kW weight of the machine ca. 2850 kg dimensions of the machine ca. 2,5 x 1,4 x 1,75 + FMB m Bdedpfx Abjuwv Tge Ija CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 equipped with swar- & coolant tank, fire distiguisher. ON/OFF 29.564h (status 24.03.2026) Running hours 26.607h (status 24.03.2026) GBL function (standard) LFV function: no

Condition: used, table length 2400 mm table width 1200 mm table height 200 mm bore 28 mm 100 x 100 mm material thickness ca. 24,5 - 27 mm 200 mm work height max. 850 mm Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs Bodpfxsyxhhyj Ab Isda - incl. base basic equipment 650 mm

Condition: new, table length 2000 mm table width 1000 mm table height 300 mm bore 28 mm weight 830 kg Bdjdpfjyxhhtox Ab Isa Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as new, used ADVANCED EQUIPMENT: 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Bedpfew U Ezzjx Ab Ioda Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.

Year of construction: 2002, condition: good (used), Make: HAEUSLER Type: Crocodile Year: 2002 Specifications Metric US Standard Min. shell inner diameter 1500 Max. shell inner diameter 6000 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 20 mm Maximium wall thickness 70 mm Max. section weight 30 T Max. weight total workpiece Bsdpfx Abekwcnzj Ieda 120 T Dimensions (Estimate) Length 60000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2007, condition: good (used), Make: HAEUSLER Type: Clamp Year: 2007 Specifications Metric US Standard Min. shell inner diameter 1800 Max. shell inner diameter 5500 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 10 mm Maximium wall thickness 40 mm Max. section weight 15 T Max. weight total workpiece 60 T Dimensions (Estimate) Length 24000 mm Width Bjdpfx Aekwcn Eob Isda 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, spot and projection welding machines, AC welding current control, welding current control, welding control -Manufacturer: HiE, welding current control for spot and projection welding machines -Type: Accent T-500 / L050 -Imax: 500 A -Technical data: see photo datasheet -Dimensions: 250/160/H100 mm -Weight: 1.5 kg Bedpfsyxc A Sex Ab Ieda

Condition: like new (used), functionality: fully functional, Year of construction: 2023, Usable length: 6200 mm Bending capacity steel 400 N/mm: 2.00 mm Stainless steel 600 N/mm: 1.50 mm Aluminum 190 N/mm: 3.00 mm Number of uprights: 6 Driven bending joints: 6 Insertion depth: 1165 mm Connection: 400V/3Ph/50Hz Other data and dimensions: see brochure Includes hydraulic jaw adjustment to compensate for different sheet thicknesses Includes adjustable jaw preload Includes 2 hydraulic pressure stages Includes safety package Includes 10 x 60 mm, 2-piece bending jaw extension rail Includes 2-way foot switch for clamping jaw open/close + automatic bending jaw start Bjdpfx Absyxchno Ioda Includes resettable sheet metal grid Includes water groove in the clamping jaw BMS Multi-Touch control with electronic depth stop TAZ 1000 With this Windows-based, graphical touchscreen control, profiles can be selected by simply tapping. The simulation program allows you to observe the complete bending process of a previously saved profile, as well as newly entered profiles. The depth stop is electronically driven via toothed belts and is equipped with four stop fingers. The fingers are infinitely adjustable along the entire machine length. Depth stop measuring range: 10/30 - 945 mm. Network connection for remote maintenance Electric cutting device S2 Cutting capacity: Steel 400 N/mm²: 2.00 mm Stainless steel 600 N/mm²: 1.25 mm Aluminum 190 N/mm²: 2.50 mm Includes optional conical depth stop for narrow/wide edges for easy joining of sheets Measuring range: 10/30 - 885 mm

Condition: ready for operation (used), Merkle W 420 AC/DC TIG Insquare welding machine / welding system Technical data can be found in image no. 2 You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. Bodpfx Aju Hg Aqob Isda For international customers, a net invoice can also be issued, provided a valid is available. Sale subject to prior sale. Visit our shop and check out our other offers as well. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the item description may occur and are subject to change.

Condition: new, Year of construction: 2026, Introducing the latest model of the CORMAK WL3000 industrial laser welder, which combines advanced FIBER technology with innovative design solutions, offering unparalleled precision and efficiency. This device is designed for welding various types of metals, which ensures the quality and repeatability of welds at the highest level. Thanks to the 3-in-1 function enabling welding, cutting and laser cleaning, the device is versatile and effective in many industries. Why choose CORMAK WL3000? Bdedpokkbw Usfx Ab Ioa The CORMAK WL2000 laser welding machine is the perfect solution for professionals looking for reliability, precision and efficiency. Its innovative design and advanced cooling system make it a future-proof device that can handle even the most demanding welding tasks. Pre-order now and take advantage of this unique offer! Key Features and Benefits Advanced cooling system : A new, more efficient water cooling system ensures optimal operating temperatures, allowing you to work longer without interruption and increasing the lifespan of your device. Innovative design : The ergonomic and lightweight design of the welding head allows for welding even in hard-to-reach places. Thanks to the adjustable spot size (0-5 mm) and replaceable nozzles, the operator has full control over the welding process. Easy to use - thanks to the solutions used and the well-thought-out design, the operator can start working after a short training Low indirect radiation, just wear protective glasses to filter strong light when working Much faster welding than traditional methods, productivity can increase by 3 to 10 times Concentrated beam: slight change in structure due to small heat-affected area, Repeatability of welds, the weld seam is nice, the welds are of high strength. Very thin materials such as 0.5 mm stainless steel can be welded. Welding option with or without wire. The integrated laser cleaning function increases the range of applications of the device. Possibility of using the cutting option - ensures excellent cutting quality, without mechanical processing. Technical parameters Maximum power 3000 W Laser wavelength 1070nm Fiber optic length 10m Working modes Continuous / Modulated Air pressure 10 - 15 L/min Welding speed 0-215mm/s Automatic wire feeder Ø 0.8 - 2.0 mm Maximum power consumption ≤11.0kW Focal length 150mm Cooling system water Operating voltage 400V Shielding gas consumption 20L/min Dimensions 600x1100x1100mm Weight approx. 207 kg

Condition: new, Year of construction: 2026, CORMAK SL2000 Laser Welding Machine is an advanced industrial FIBER system providing comprehensive welding, cutting and laser cleaning functions in one unit. With a 2000 W laser source and a modern design, this machine is ideal for facilities where welding speed, joint quality and reliability are key factors. As part of a special offer, the machine comes with a complete set of U-groove rollers, a Teflon wire feeding tube and a cleaning kit (lens and nozzle) Main Advantages High laser power – 2000 W – enables deep penetration and welding of thicker materials without multiple passes. Welding speed up to 120 mm/s – significantly reduces production time compared to conventional methods. Concentrated laser beam – minimal heat-affected zone ensuring clean, durable weld seams. Thin material capability – allows welding of stainless steel from 0.5 mm thickness. Option to weld with or without wire – flexibility to match process requirements. Laser cleaning and cutting modes – extend the machine’s versatility and daily usability. Automatic wire feeder – fully synchronised with the control software for process stability. Design and Technology CORMAK SL2000 is equipped with a 1080 nm fiber laser source and an advanced head with adjustable spot size (0–5 mm), enabling welds even in hard-to-reach areas. The water-cooling system and 230 V operating voltage ensure safe and stable performance across various production environments. Interchangeable nozzles and ergonomic design make servicing and daily operation simple and efficient. Precision and Efficiency The penetration depth for stainless steel at 1 m/min reaches 4.57 mm, which is an excellent result for a compact industrial unit. Adjustable welding parameters allow full control over seam quality — for both thin elements and thicker construction components. Stable beam parameters guarantee repeatability and a clean aesthetic finish. Applications Metalworking plants and industrial workshops Production of railings, light structures and steel frames Automotive, household appliance and electronics industries Laser cutting and cleaning of metal components Standard Equipment Laser welder with integrated cooling system Welding gun with adjustable focal length Fiber laser source Automatic wire feeder Ø 0.8–1.6 mm Complete cable set Starter kit of nozzles and protective lenses Technical Data Maximum power 2000 W Laser wavelength 1080 nm Penetration depth (stainless steel 1 m/min) 4.57 mm Penetration depth (carbon steel 1 m/min) 3.59 mm Penetration depth (aluminium 1 m/min) 4.0 mm Penetration depth (brass 1 m/min) 4.0 mm Bdedpfx Aeychl Sjb Ioa Welding speed 0–120 mm/s Automatic wire feeder Ø 0.8–1.6 mm Maximum power consumption ≤6.0 kW Cooling system Water-cooled Operating voltage 230 V Shielding gas consumption approx. 10–12 L/mm Ø wire Dimensions 600 × 1100 × 1100 mm Weight approx. 185 kg

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 5,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current (min.): 25 A, welding current (max.): 400 A, Used Lorch S5 SpeedPulse – Water-cooled TwinPulse Mig 3 Months Warranty Refurbished, tested, serviced, and ready for inmediate use. Specs: 25-400 AMP 380 Volt Pulse / TwinPuls SpeedPulse / Twin SpeedPulse SpeedArc / SpeedUp Water-cooled 2/4 Step / 4 Roller drive Pre gas / Post gas Start current / End current Fixed programs / Program memory Including: 4 Meter SB501XW Welding torch, earth work cable, gas cable, and 10 meter interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Bsdoyylpkepfx Ab Ijda Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, CNC-Turning Automatic Lathe - Longitudinal | Brand: MAIER | Type: ML 32E | Year of manufacture: 2016 The machine can be inspected by appointment under power. Condition: Very well maintained, fully functional / ready for use. Operating hours: approx. 33.720 h TECHNICAL SPECIFICATIONS: - Axes: 11 - Turning diameter over bed: 32 mm - Spindle bore: 34 mm - Channel 1/Z1 > Spindle stroke: 220 mm - Main spindle speed: 6.000 rpm - Spindle motor: 5.5/3.7 kW - Tailstock bore: 32 mm - Feed rate: 32 m/min - Tailstock speed range: 8.000 rpm - Channel 2/Z2 > Turning length (Counter spindle): max. 340 mm Bdjdeyw Trnopfx Ab Isa - Channel 3/Z3 > Turret: 160 mm - Clamping chucks: 1536E - Drive motor power: 5.5/3.5 kW - Total power requirement: 28.7 kW, 60 A - Machine weight approx.: 4.4 t - Space requirements approx. 8.0 x 2.7 x 2.3 m SPECIFICATIONS: - Control system: FANUC T31i - 1 Counter spindle - NC C-axis on main and counter spindles - Tool holders for 6 fixed turning tool holders, cross-section 12 x 12 mm - Bar loading magazine, manufacturer: FMB Turbo Ø 3–36, year of manufacture: 2016 Guide channel DM12 + DM25 - Chip conveyor - Electronic handwheel - High-pressure system, manufacturer: KNOLL (pump 1: 1–120 bar, pump 2 up to 50 bar) with paper belt filter system - Fire protection system, manufacturer: KRAFT & BAUER - WPM4 - Tool and process monitoring "Genior Modular - Fully automatic tool and process monitoring" - Extraction system - Documentation - CE marking Additional accessories are available for purchase. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Kemper Fume filter table type fume extraction unit Bdodpoyrfhvofx Ab Isa

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Used multiprocess MIG/MAG welding machine EWM Phoenix XQ 500 puls DW EX R1 5 m, MFG 2023 Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP WRS/WHS, MFG: 2023 Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Welding torche PM 551 W LED X M9 3 m Bdodpfswgy Eyex Ab Ija Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 550 A / 60 %, 95 mm² Pressure regulator with manometer, 30 l Mains plug, assembled, Workpiece lead with clamp: WK95mm² Ø 13 mm 550A/60% 4m/Z Crane frame – moves the crane lifting point from the bottom to the top Intermediate hose package, water cooled, 14-pole Cross-section: 95 mm²: Z MIG XQ 95 mm²/1.8 m 500A/80% AK300 Wire spool adapter for use with a wire basket spool (B 300) Setting range for welding current 5 A - 500 A Duty cycle 40 °C 500 A / 80 % 470 A / 100 % Open circuit voltage 82 V Mains voltage (ex works) 3 x 380 V - 400 V Mains voltage (possible) 3 x 440 V - 460 V Mains voltage (possible) 3 x 480 V - 500 V Mains tolerances (ex works) -25 % up to +20 % Mains frequency 50 Hz / 60 Hz Recommended generator power 33.2 kVA Efficiency 90 % Power consumption Pi 26 W Cooling capacity at 1 l/min.1500 W Pump pressure 3.5 bar Tank capacity 8 l Protection classification IP23 EMC classA Dimensions (L x B x H) 1152 mm x 686 mm x 976 mm Weight 125.5 kg / 276.7 lbs Standards IEC 60974-1, -2 and -10 CL.A Price Euro 6.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2023, functionality: fully functional, Used multiprocess MIG/MAG welding machine Phoenix XQ 500 puls DW EX R1 5 m, MFG 2023 Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP WRS/WHS, MFG: 2023 Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Welding torche PM 551 W LED X M9 3 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 550 A / 60 %, 95 mm² Pressure regulator with manometer, 30 l Mains plug, assembled, Workpiece lead with clamp: WK95mm² Ø 13 mm 550A/60% 4m/Z Crane frame – moves the crane lifting point from the bottom to the top Intermediate hose package, water cooled, 14-pole Cross-section: 95 mm²: Z MIG XQ 95 mm²/1.8 m 500A/80% AK300 Wire spool adapter for use with a wire basket spool (B 300) Bedpowktz Ajfx Ab Ijda Setting range for welding current 5 A - 500 A Duty cycle 40 °C 500 A / 80 % 470 A / 100 % Open circuit voltage 82 V Mains voltage (ex works) 3 x 380 V - 400 V Mains voltage (possible) 3 x 440 V - 460 V Mains voltage (possible) 3 x 480 V - 500 V Mains tolerances (ex works) -25 % up to +20 % Mains frequency 50 Hz / 60 Hz Recommended generator power 33.2 kVA Efficiency 90 % Power consumption Pi 26 W Cooling capacity at 1 l/min.1500 W Pump pressure 3.5 bar Tank capacity 8 l Protection classification IP23 EMC classA Dimensions (L x B x H) 1152 mm x 686 mm x 976 mm Weight 125.5 kg / 276.7 lbs Standards IEC 60974-1, -2 and -10 CL.A We have 2 identical complete pieces available in stock. Price Euro 5.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2013, functionality: fully functional, For sale: Due to changes in our manufacturing division and a production conversion, we are selling a micro plasma welding unit at short notice. * Castolin Micro GAP 50 DC / Micro Plasma Welding Unit * Year of manufacture: 2013 * Description: For professional use in industrial and craft sectors. * The Micro GAP 50 DC is ideal for welding tasks requiring precision, high-quality layer properties, and low dilution; especially when fully automatic welding is not appropriate or feasible due to small batch sizes or a variety of tasks. The welding units are available with various equipment features. Operation is via push-button selectors and rotary controls on the front display. The Micro GAP 50 DC is designed for manual and semi-automatic welding applications where frequent parameter adjustments are necessary. All settings are clearly shown on the LCD display in plain text. Up to 100 memory slots are available for storing welding parameters. The highly efficient inverter delivers 33 A at 100% duty cycle, which is sufficient for various micro plasma welding tasks. * Condition: Used, very good, little used. Original price (net): €13,995 * - Complete with accessories and documentation (see photos) - Without gas cylinder - Without base cart – this can be purchased optionally for €300. * IMPORTANT: For logistical reasons, we sell only within Europe. The buyer is responsible for removal, loading, and transportation. * "The seller excludes any warranty for the purchased item. The item is sold as-is, without any guarantee for fitness for a specific purpose or freedom from defects. The buyer confirms that the item was inspected before purchase and is satisfied with its condition. The seller assumes no liability for any damages resulting from the use of the item. Any claims by the buyer against the seller are excluded." * Status: 31.03.2026 * Price: €2,900 negotiable / plus VAT Prices are net plus VAT * Bedpow A Iltofx Ab Ijda For any questions or further information, feel free to contact me.

Condition: used, functionality: fully functional, for extended medium to heavy-duty applications. With switchable power levels and mode control for a wider range of uses. Bdjdpsyx Sq Eofx Ab Ija • Cleans and passivates in a single operation • Can process any thickness of stainless steel • Electropolishing possible • Low operating costs • Cost-effective consumables and spare parts, saving time • Up to 10 times faster than pickling paste • No reworking required • No need for regrinding or polishing Flexible and robust • Ideal for large objects • Durable high-performance brush • Splash-proof housing • Machine does not overheat • Cable can be extended up to 12 meters • Operates at 250 watts • Can be powered by a generator