Used Brandt Kd 83 for sale (100)

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Nwodpfxsvvkd To Ad Sjh Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Nodpfx Aevvkfwod Sjwh Storage location: Nattheim

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar Nwedpfx Aec Tmygsd Sjh machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Brandt edgebander (Homag group) for roll and ABS edge banding. Complete with pre-milling units at entry and all profiling groups with corner rounding units. In perfect working condition. Nwedoy N Ukispfx Ad Sjh

Condition: excellent (used), Gluing machine Guillotine cross-cut saws milling cutter Scraper Nwedpfxottu Ris Ad Seh Polishing machine

Condition: excellent (used), Gluing unit Cross-cut saw Two straight cutters Two rounding cutters Nwsdpfx Adoxdy Sls Seh

Condition: used, Year of construction: 2017, machine/vehicle number: 0-261-20-8747, operating hours: 412 h, Top-of-the-line Brandt O KDF 120 C edge banding machine with jointing and profiling unit, sourced from a small and well-maintained carpentry workshop. Type: Optimat KDF 120 C, year of manufacture 2017, machine number: [Machine Number]. Nwedpfezha Easx Ad Ssh Technical data and units: Edge banding material approx. 0.4 – 3 mm, workpiece thickness approx. 8 – 40 mm, jointing unit, single-stack edge magazine, A3 gluing unit and pressure zone with 3 rollers, trimming unit with 2 saw blades, profiling unit (top/bottom), WD40 profiling unit, profile and flat scraper blade, feed rate approx. 8 m/min.

Condition: used, machine/vehicle number: 008554, Type of edging: Thin edge, Thick edge, Solid wood Nedszg D Ezjpfx Ad Sowh Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 16 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008552, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Nodpszg D D Djfx Ad Sewh Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2008, machine/vehicle number: 0-261-06-5499, functionality: fully functional, workpiece height (max.): 42 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, actuation type: electric, total height: 1,600 mm, total length: 4,800 mm, total width: 800 mm, year of last overhaul: 2026, Edge banding machine is being sold due to the purchase of a new machine and conversion to PU. Maintained regularly, runs flawlessly. Includes two additional gluing units. Suction pipe assembly included. The machine is still in operation and can be inspected and tested. Nwedpfx Aoy I Apkod Ssh

Condition: excellent (used), BRANDT optimat kdf350C edge banding machine Pre-milling cutters Edge gluing with a roller Pneumatic pre-trimming cutter Pressure rollers Final trimming cutters R1-R2 top and bottom milling unit Corner rounding unit Profile edging unit Flat edging unit Max. element height 50mm Max. veneer thickness in roll 3mm Nsdpjzfyyrofx Ad Sswh Feed rate 11m/min Machine length 390cm Machine inspected, very good condition Ready for operation

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Nodpfx Adjy Ruzqj Sowh

Condition: used, machine/vehicle number: 008477, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Nodpoy Hq Nvefx Ad Sswh Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007985, Type of edging: Thin edge, Thick edge, Solid wood Nwodox A Th Dspfx Ad Ssh Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2003, machine/vehicle number: 0281062425, Used Edge Banding Machine Year of manufacture: 2003 Equipped with a gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application via roller (co-rotating and counter-rotating modes) Features: Automatic edge magazine (coil and strip material) Pressure zone with pneumatically driven main pressure roller and additional rollers for optimal bonding of the glue layer Centrally adjustable top pressure Central manual lubrication of the chain conveyor Control panel at the machine infeed Machining Units: End trimming unit (saw units) for front and rear overhang 2 motors, each 0.18 kW Swivel range: 0–15° Flush trimming unit (top and bottom) with vertical and horizontal tracing Swivel range: 0–15° 2 motors with interchangeable cutters (straight/radius) Nwedpfx Ajy Nxgnod Seh Digital counters for fast and precise adjustments Pneumatic two-point adjustment Buffing unit for final finishing Additional Equipment: Extendable support table up to 350 mm Integrated section control (contactless operation) Settings via keyboard and LED display Technical Data: Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Location: Bulgaria

Condition: excellent (used), Year of construction: 2017, Brandt KDF 1440 Edition Only 1700 operating hours – in very good condition – can also be supplied with a preheating station. XES 200 autonomous unit (+ €4500) available. SUMMARY OF MACHINE EQUIPMENT: JOINTER HEAD 2 X 2.2 KW 200 HZ GLUING UNIT QA 65 N SAWING UNIT BEVEL/STRAIGHT 2 X 0.18 KW Nodpfx Adszb Igge Sjwh PNEUMATIC ADJUSTMENT FOR SAWING BEVEL/STRAIGHT MULTI-STAGE MILLING HEAD MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT SHAPED MILLING HEAD 1 X 0.35 KW WD 60; also for structural flooring PNEUMATIC 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER HEAD MZ 40 GLUE JOINT SCRAPER EDGE TRIMMING UNIT Overpressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spray unit for workpiece Automatic edge infeed Multi-roller scanning for multi-stage milling head MS 40 + multi-stage scraper MZ 40 Cleaning agent spray unit WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 8-22 mm ¦ 70 mm* – For workpiece thickness 23-40 mm ¦ 120 mm* – For workpiece thickness 41-60 mm ¦ 150 mm* *Depending on workpiece length – Workpiece overhang ¦ 38 mm – Workpiece thickness ¦ 8 – 60 mm – Edge height max. = workpiece height ¦ + 6 mm – Edge material, roll ¦ 0.4 – 3 mm – Edge cross-section max. – For PVC ¦ 135 mm² – For veneer ¦ 100 mm² – Roller diameter max. ¦ 830 mm – Edge material, strip ¦ 0.4 – 8 mm – Edge cross-section max. – For strips ¦ 360 mm² – Feed rate ¦ 8 – 14 m/min – Max. feed rate with shaped milling head ¦ 11 m/min – Working height ¦ 950 mm – Pneumatic connection ¦ min. 6 bar – Overall length ¦ 5,573 mm Complete description: see PDF

Condition: good (used), Year of construction: 2012, functionality: fully functional, BRANDT KDF 1630 PROFI LINE EDGEBANDING MACHINE FOR SALE IN USED, GOOD CONDITION! Nodpfjzdnp Sjx Ad Sewh FULLY FUNCTIONAL!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, total length: 4,150 mm, overall weight: 1,350 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Brandt-Homag KDF 220 Highflex edge banding machine, year of manufacture 2012 from a small carpentry business Last inspection: March 20, 2026 Type: KDF 220 Machine number: 0-261-20-6136 Wiring diagram number: 0-261-20-6136 Year of manufacture: 2012 Supply voltage: 400Y/230 Units controlled via the display Gluing unit: 2 x 2.2 kW Trimming saw unit: 2 x 0.18 kW Flush trimming unit: 2 x 0.27 kW Profiling milling unit: 2 x 0.35 kW WD 40 -additional function: structural base Radius draw knife Straight draw knife Edge thickness: 0.4 - 6 mm Fsbq Uvmsyy S Ade Rnjph Workpiece thickness: 8-60 mm Feed rate: 11 m/min Total power: 16 kW Nwsdpfszdb Ivsx Ad Seh Length: 4150 mm If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a used BRANDT KDF 440 C edge banding machine from the HOMAG Group. Year of manufacture: 2017 Edge trimming unit Gluing unit Pressure zone Cutting unit (2-motor) Multi-stage trimming unit Profiling and corner copying unit (1-motor) Profile and flush trimming blade Jointing unit Feed rate: 14 m/min EVA & PUR compatible PowerTouch control system PU pressure rollers Few operating hours Njdpfszc D D Djx Ad Sjwh Available from June 2026 In very good condition.

Condition: used, Year of construction: 2008, Connected load: 11.5 kW Feed rate: 11 m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Dust extraction diameter: 1x 120 / 2x 100 mm Working height: 950 mm Dimensions: 5860 x 1560 x 2300 mm Weight: approx. 2600 kg Nodpfxozab Rij Ad Sewh Location: Customer

Condition: used, BRANDT KDF 430 Edging Machine Pre-milling cutters Replaceable trimming unit Edge gluing with a roller Pneumatic preliminary trimming cutter Pressure rollers Final trimming blades Adjustable top-bottom milling unit R1-R2, motor-driven Corner rounding unit Profile trimming unit Flat trimming unit Polishing unit Max. workpiece height 60mm Max. veneer thickness in roll 3mm Feed rate 8-14m/min Machine length 480cm Nwedpozarz Esfx Ad Ssh Machine inspected, ready for operation

Condition: good (used), Year of construction: 2004, The machine is equipped with a joint milling unit, cross-cutting unit, 2 saws, milling station, corner copying, radii with flat scraping blade. Total connected load: 10 kW, compressed air connection: 6 bar. Air consumption per cycle: 43 l/min. Dimensions: 4740 x 1635 x 1706 mm. Body dimensions: 3100 x 1040 x 1706 mm. Edge thickness: 0.4 – 8 mm. Good condition. Nwedpsyl Uurefx Ad Seh Transport available at extra cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: good (used), Year of construction: 2014, Description: see machine photos. Njdpfx Aey Tm Nfsd Sjwh

Condition: used, machine/vehicle number: 006216, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Njdpfx Adjy Nk Ahj Sjwh Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min

Condition: used, machine/vehicle number: 007834, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Nsdpfxev Sf I Ee Ad Sjwh