Used Thomson Friction Welding for sale (5,698)

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Friction welding machine from MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315 - Rexroth hydraulics Dksdpfxsv Uzf Ej Afzou - German user interface - CE Upon request, this machine can also be converted for many other welding tasks.

Condition: new, Year of construction: 2022, operating hours: 15 h, functionality: fully functional, total length: 4,500 mm, total width: 2,150 mm, total height: 2,800 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, emergency stop, type plate available, Machine FSW - 1 welding head - 1.6x1m working surface, gantry-type machine. This machine will weld the linear parts and/or 2D. Dksdpfx Afju Hi Nyszju Machine FSW - 1 welding head - 1.6 x 1m working surface, gantry-type machine, welds linear and/or 2D parts.

Condition: used, Year of construction: 2025, functionality: fully functional, The machine is used with less adjustment work, ready for immediate use. Dedpfx Afji An Edozoku

Condition: ready for operation (used), Thomson Neff linear drive Wiesel Powerline, travel 800 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Dkjdexah Uajpfx Afzju

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather Dksdpfoxlr Tdjx Afzou water cooled, air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Condition: ready for operation (used), Year of construction: 1989, machine/vehicle number: D205228, Heinrichsglueck H-36 welding positioner Dkodpfxeuiac He Afzou Fully functional. Square table 1050x1050mm. The set includes a remote control with adjustment of table rotation speed and inclination (135 degrees). New power and control cable.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Dkedpoxfrv Esfx Afzju Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: excellent (used), load capacity: 3,000 kg, table load: 3,000 kg, Equipment: foot remote control, Belgium Welding 3 To 3,000 kg load capacity welding positioner, complete set Horizontal load capacity 3,000 kg, tilted load capacity 3,000 kg Stepless tilt and speed adjustment Very robust construction Speed steplessly adjustable from 0.05 to 0.7 rpm, digital display Turntable diameter: 1,400 mm Height horizontal: 1,450 mm, tilted to center: 1,200 mm Dkedpsxbhrhofx Afzsu Length: 2.0 m x Width: 2.0 m Hand-held remote control with digital display and foot remote control

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Dkjdpfx Afofvqmxjzju Hydraulic

Condition: new, Year of construction: 2025, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Dedpfx Afon Sl D Rjzoku

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, welding robot fully equip vertical bend arm robot Dsdorl S Ufopfx Afzoku - with 6 axes - reach: 1525 mm - with automat welding gun, type: DIX MALZ 520 - with wire feed device, manufacturer: FRONIUS, type:ROB.VR1500 DINSE-ZA - with 2 welding working tables (rotary table) - plate dimensions: each 1200 x 750 mm - with pneumatic driven cleaning device - with positioning straightening station for torch - with current source, manufacturer: FRONIUS, type: welding device TPS 4000 - with technical documentation - attention: the machine can be transported on a standard truck Technical attributes dimensions (l x w x h) approx. 4700 x 3500 x 3800 mm weight approx. 5000 kg year of construction 2000

Condition: used, Linear drive, linear gearbox, lifting gear, spindle drive, linear unit, linear guide, linear axis, linear actuator Dkodpsqxvxzefx Afzou -Manufacturer: Thomson, linear actuator Electrak E150 -Type: DF36-10W51-03L02MM -Dimension: 300/200/H110 mm -Weight: 2.2 kg

Condition: as good as new (ex-display), JUNE OFFER. FOR THE WHOLE OF JUNE -10% off all welding machines We offer welding machines in a wide variety of configurations and always have several sets in stock. CMT / ROBOT / CMT UNIVERSAL hose packages or HOLLOW SHAFT robots. Everything in stock and available immediately! Don't hesitate to request your customized configuration! We also have a wide variety of spare parts -30% -50% -70% in stock. Just send us a quick email, call us, or WhatsApp us. CMT MACHINES at 1/3 the new price! - 66% DISCOUNT ALL MACHINES CAN BE VIEWED IN VIENNA and PURCHASED WITHOUT WAITING! The prices listed are all starting from ... euros. The prices/offers are created individually according to the device configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) Vufdfi .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the product. Please see the numerous YouTube videos on the topic of CMT! Also available via WhatsApp and Viber Dkodpfohzhynex Afzju Stocked in Vienna 1230 (Vienna) Shipping on pallets available for an additional charge: Austria approx. 180 euros Germany approx. 230 euros Europe upon request All prices are starting from prices. You can configure the devices with us. Robot device or handheld device. Long connecting hose package or short. Various hose packages to choose from. Synchropuls. 270 400 or 500 amp units in stock. CMT versions available as handheld or robotic. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: new, Year of construction: 2024, operating hours: 2 h, workpiece weight (max.): 1,000 kg, pipe diameter (max.): 800 mm, The system consists of two units, one driven and the other idle. There are four wheels in total, two in each unit (drive and idler). The wheels are driven by heat-treated gears with high wear resistance. Dsdpfx Ajwl Enkjfzsku Model: 2k-TR-1 Load capacity: 1000 kg Workpiece diameter: 20-800 mm Roller diameter: Ø200 mm Roller width: Ø50 mm Rotation speed: 80-600 mm / min Connection voltage: 230 V, 1 phase 50 Hz Weight: 54 kg Control: Handheld control unit Control functions: Forward/Reverse/ Speed control/Non-stop IP65 Version: 1x drive unit with 1x idler and control cabinet incl. all functions and foot switch

Condition: used, This is an LSQ5X welding power source from SKS Welding Systems, together with a Weld Process Controller MULTIPROCESS - Q80 and an SKS Frontpull 8 (23°) Dksdsuxbx Depfx Afzeu

Condition: new, Year of construction: 2025, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Djdpfxewzv D Ie Afzeku

Condition: like new (used), Year of construction: 2018, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20RD.(Payload: 20kg, H-Reach: 2017mm, Robot Mass: 293kg, 2010.04) 1 x YASKAWA DX100 controller.(2010.05). 1 x IPG YLS-4000.(2017). 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD(S.N.:BIMO2W17013). Machine can be inspected. Very good condition. Connected, can be tested. Dkodpfx Aoh Ad E Ujfzju Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Dkjdpfx Ajurlcrofzeu Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: as good as new (ex-display), Fronius TPS 4000 CMT ✅ Scope of delivery: ➤Fronius TPS 4000 CMT power source ➤Fronius FK 4000 ➤Fronius VR 7000 CMT wire feeder ➤Fronius Robacta CMT hose package or CMT hand hose package ➤Fronius intermediate hose package ~1.5m ➤Fronius RCU 5000i ➤Fronius Interbus Rugged Line interface ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) The prices listed start at ... euros. Prices/offers are customized based on the device configuration. CMT (Cold Metal Transfer) technology is particularly known for its high precision and flexibility when welding thin materials and delicate components. Unlike traditional MIG/MAG welding processes, CMT uses a controlled, pulsating wire feed, which transfers the welding wire very precisely into the weld pool. This minimizes spatter, enables excellent heat input control, and reduces distortion and discoloration of the material. We always have several machines in stock in different versions. Ask for a personalized configuration / additional options. ---- AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Vienna, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►► ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? Dksdpfx Aowbixrefzsu We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: used, Oscillator tubes (triodes) for HF Welders : - BW 1608J2F-R, made E.E.V. : NEW - BW 1185J2, made E.E.V : Djdpfxsvtp Huo Afzjku

Condition: good (used), type of input current: AC, overall weight: 85 kg, input voltage: 220 V, suction capacity: 1,050 m³/h, input frequency: 50 Hz, Nedermann 641 Mobile welding fume extractor filtration capacity: 1050m3/h articulated extraction arm arm length 220cm voltage. 220v 50hz 900watt Airflow in the arm: 750 - 1050 m3 Weight: 73 kg Arm diameter: 160 mm Dkodpfx Afevmr D Aezou Noise level: 73 dB(A) Filtration efficiency: Main filter>99 % -HEPA filter >99.97 % DOP 0.3 mm Filter area: main filter 35 m2 - HEPA filter 7.5 m2

Condition: used, Year of construction: 1992, sheet thickness steel (max.): 4 mm, sheet thickness (max.): 4 mm, outer diameter: 60 mm, pipe diameter (max.): 60 mm, FEEDSTOCK STEEL STRIP .. sheet thickness max.: 4 mm .. sheet thickness min.: 0.8 mm PRODUCT (PROFILE, TUBE) .. external diameter min.: 24.9 mm .. external diameter max.: 60 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 4 mm LINE CHARACTERISTICS .. Forming Process: rollforming .. welding process: HF inductive .. sawing process: travelling Dedpfexl Hm Sex Afzeku system consisting of: - large coil reel - Bandschweisseinrichtung - optional: horizontal band loop - side planer - forming unit - HF welding unit - units for outside scarfing, inside scarfing - each without impeders, tooling - cooling section - calibration unit with alternative calibration station for ovals, polygons - flying saw - chip blow unit - hexagon bundling- and binding unit optional roll-sets available for: forming section: 26,30, 32, 36, 38, 40, 44, 46, 52, 60 mm calibration section: 25, 26, 29.5, 29.89, 30, 32, 33, 33.4, 33.5, 33.7, 34, 35, 36, 37, 38, 39, 40, 42.4, 43, 44, 45, 46, 50, 51, 51.5, 57, 58, 60 mm without drawints

Year of construction: 1999, condition: excellent (used), Year of construction approx. 1980 Power at 50% ED 35 kVA Dedpfx Afsium Niszoku Projection 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely adjustable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insertion electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connected load 83 KVA Mains connection 380 volts, 50 Hz - 4-time control - stepless power adjustment - Single points and series points - parallel electrode guidance - Water-cooled (without cooling unit) - electric foot switch Weight 300kg

Condition: excellent (used), functionality: fully functional, nominal power at 50% duty cycle: 14 kVA, input voltage: 380 V, type of cooling: water, overall weight: 300 kg, welding power (max.): 40 kVA, arm spacing: 450 mm, total width: 450 mm, total height: 1,450 mm, total length: 1,100 mm, stroke length: 110 mm, input frequency: 50 Hz, Spot welding machine Soudometal SP14P maximum welding current at 50 ED: 14 ​​kVA max. welding power 42 kVA Electrode force: 30-200 DAN Electrode stroke = 30-110 mm Projection: 450 mm Mains connection 380V / 42A secondary current continuous current 1.85 kA; kA short-circuit current 12.5 kV; Electrode force: 30-200 DAN Dedpfx Aswkr Injfzeku foot control Cooling water volume: 3 l/min Electrode arm Ø: 45 mm Electrode holder Ø: 25 mm Machine weight: 300 kb kg Dimensions: 1250x1100x450 mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2017, type of input current: DC, KEMPER Dusty welding smoke extractor + 10 meter suction pipe + exhaust welding gun Holch 350-SC. 3.5 meters Kemper Dusty welding fume hood Suction power - 260 m³/h suction pipe: 10 meters Holch 350-sc 3.5m suction welding gun Filter mode - Cleanable filter Filter cleaning method - Manual Filter surface - approx. 1.35 m² Motor power - 1.6 kW Power supply - 1 x 230 V / 50 Hz Filter type - Filter cartridge Filter material - ePTFE membrane Filter efficiency - > 99.9 % Dust classification - M Basic data Dimensions (W x H x H) - 300 x 300 x 690 mm Weight - 24 kg Rated current - 8.7 A Noise level - 74 dB(A) Further information Fan type - Suction turbine Djdemxklhepfx Afzsku Hose connection - ~45 mm x 2