Used Lock for sale (14,204)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, cutting height (max.): 2,200 mm, cutting width (max.): 4,100 mm, saw blade diameter: 250 mm, height adjustment type: pneumatic, actuation type: pneumatic, total length: 4,100 mm, total height: 2,200 mm, overall weight: 700 kg, Equipment: CE marking, scorer, Available from the last week of August. We are offering this very well-maintained Holzkraft VPS 2241 VR ED vertical panel saw, manufactured in 2022. The machine was installed and put into operation at our facility in May 2023. Holzkraft VPS 2241 VR ED – vertical panel saw (commissioned in 2023, excellent condition) The machine is connected and can be tested. Selling my vertical panel saw, Holzkraft VPS 2241 VR ED, purchased and assembled new in 2023, and therefore in very good condition. Selling due to expansion. Features & Highlights: • Scoring device for clean, tear-free cuts • Digital measuring displays (horizontal & vertical) • Panel positioning on movable rollers (no lifting required) • Pneumatic locking of the saw carriage • Vertical/horizontal switching • Robust, torsion-resistant machine frame • Integrated dust extraction for direct connection to a dust extraction system The machine runs perfectly, no defects. Technical Data: • Cutting length: 4100 mm • Cutting height: 2200 mm • Cutting depth: 60 mm • Saw blade: Ø 250 mm • Motor: 3 kW / 400 V • Weight: approx. 700 kg Condition: • Year of manufacture 2022 / Installation: 2023 • Low usage • Ready for immediate use Gjdpeyxv T Rofx Ak Ujbt If you have any questions or require more information, please send us a message or call us.

Year of construction: 2026, operating hours: 24 h, condition: new, functionality: fully functional, Equipment: CE marking, THANKS TO HORIZONTAL AND VERTICAL BRUSHES, IT PERFORMS BRUSHING AND CLEANING OF BOOTS AND BOOT SOLES. BRUSHES ARE EASY TO INSTALL AND DISMOVE. EASY PLC CONTROL SYSTEM IS AVAILABLE. THERE IS A TIME-ADJUSTED SYSTEM IN THE PASSAGE SYSTEM (IT IS POSSIBLE TO SET THE TIME OF THE BRUSH, SENSOR SINK AND DOUBLE HAND DISINFECTANT SYSTEM). THERE IS NO PASSAGE PERMIT WHEN THE PERSONNEL JUMPS THE QUEUE. (THE QUEUE SYSTEM IS REQUIRED TO DO SOLE SCRUBBING, HAND WASHING, AND TWO-HAND DISINFECTANT.) Gbodpfxjzg Azns Ak Uot IT HAS A TWO-DIRECTION FREE PASSAGE FEATURE IN CASE OF A POWER CUT. COMPLETE CHROME STAINLESS SENSOR SINK DOUBLE HAND DISINFECTANT HORIZONTAL BRUSH HYGIENE MAT MANUAL SOAP DISPENSER Z NAPKIN HOLDER AVAILABLE. OPTIONAL SELECTION (SENSOR SOAP DISPENSER, SHOES SHELTER JET DRYING ETC)

Condition: used, mileage: 202,300 km, power: 220 kW (299.12 HP), first registration: 09/2016, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,190 mm, loading space width: 2,490 mm, loading space height: 790 mm, Equipment: ABS, air conditioning, parking heater, soot filter, Atego 1530 L, flatbed truck Differential lock, air conditioning, air-sprung rear axle, auxiliary heater, exterior sun visor, 3 seats, CD radio with Bluetooth, lane keeping assist, EURO 6, multi-function steering wheel, engine brake, cruise control, 2x electric windows, electric mirrors, ABS. Payload: 8,360 kg Wheelbase: 4,760 mm Internal body dimensions: Length: 7.19 meters Width: 2.49 meters Gedpfx Aez Ab T Uok Ujbt Height: 79 cm

Condition: used, POWERLOCK MOUNTED MILLING HEADS, price €7,500 Two cabinets filled with milling heads for various applications, approximately 45 pieces. Working dimensions in mm: Gbsdpfxszxguij Ak Ujt 40 - 1 piece 60 - 12 pieces 80 - 7 pieces 100 - 9 pieces 130 - 3 pieces 140 - 1 piece 150 - 7 pieces 170 - 3 pieces 180 - 2 pieces

Condition: used, Year of construction: 2018, machine/vehicle number: M221, Used Filling Monoblock Alfatek Easy Compact 2018Used Filling Monoblock Alfatek Easy Compact 2018MONOBLOCK Mod. ROBOT COMPACT 7/1Machine suitable for treating refermented beer in the bottle. Machine suitable for treating Steinie Flasche 0.33 I bottles Height 174mm — diameter 70mmComposition:• Elvira LP Series filler with 7 filling valves • Single-head crown capper Mod. “Eagle/C”Max. production: 500/1000 bph with 330 cc bottles and product without foam. Gbodpfxsvgukrs Ak Uot Production may vary according to the type of product to be bottled.Power supply: 380V three-phase * N — 50hz • Electrical panel position: Right • Control panel nameplate language: Italian Worktop: 1000 + -50 • Bottle entry and exit: on the rightBottle size:• Height: from 174 to 310 rams. Diameter: 58 to 110mm. • Bottle neck diameter: from 16 mm (int.) to 30 mm (ext.) Level variation in the bottle: from 40 min to 75 mm Bottle neck height: H. level + 30 minThe Used Filling Monoblock Alfatek Easy Compact can only be unloaded with a forklift of adequate capacity and forks of no less than 1,400 mm in length. Complete with safety guards in accordance with CE standards.ACCESSORIES INCLUDED IN THE PRICE:CE-rated safety guards; Equipment for n. 1 cylindrical bottle format; Towing head. return head, bottle arrival table.

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), As-new Combined Heat and Power Plants – 2× WOLF Power Systems – 140 kW electric each – unused For sale are two as-new combined heat and power (CHP) plants from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or commissioned and are therefore in technically unused condition. Since delivery approximately five years ago, they have been stored dry and protected. Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Condition: unused / as new Storage: dry, professionally stored Availability: immediate Godpfjyt Emnjx Ak Usbt The current purchase price is approximately €220,000 net per unit. This is a rare opportunity to acquire high-quality CHP technology well below new price – ideal for commercial, district heating projects, agriculture, or energy contracting. Inspection possible by appointment. Asking price is half of new price, please submit your offer!

Condition: excellent (used), high-precision HEMO clamping block, grade 2 Gsdpjzz Amysfx Ak Usbt Length = 135 mm + 12 mm stop plate Width = 120 mm = slot length

Condition: used, functionality: fully functional, total length: 4,350 mm, clamping force: 500 kN, Tool Carrier / Technology Carrier Zettelmeyer W26/20 Currently dismantled and divided into two parts. The carrier was completely overhauled by DEGUMA-SCHÜTZ GmbH and sold to us. DEGUMA-SCHÜTZ GmbH has taken over all documents of the company Zettelmeyer and can also supply spare parts and carry out repairs. Gjdsywtyfopfx Ak Uobt Please refer to the product images and the attached descriptive document for exact dimensions/information.

Condition: good (used), functionality: fully functional, mileage: 13,187 km, power: 140 kW (190.35 HP), gearing type: automatic, fuel type: diesel, Year of construction: 2007, operating hours: 13,187 h, Wheel loader Liebherr L556-454, 2plus2 configuration, year of manufacture 2007. Equipped with Liebherr engine D934L A6 delivering 140 kW, automatic transmission, and self-locking differentials on both axles. The stepless 2plus2 drive system and wet multi-disc brakes on both axles ensure high traction and operational safety. The machine features single-lever control, air conditioning, adjustable steering column, and a driver's suspension seat with LFD damping system for enhanced operator comfort. The cab is fitted with a laminated safety glass windscreen, green/tinted version. Additionally, there are 4 working lights at the front and 2 reversing lights. Attachments and special equipment: - 2600 mm lift mast - Piston rod protection for 2600 mm lift mast - 4 Michelin tyres 23.5 R25 XHA*L3 - Quick coupler - Single rail guide for Z-kinematics / 2600 mm lift mast - Single front hydraulic auxiliary circuit and additional hydraulic swing function - Automatic central lubrication system with electric pump and electronic control - Reversible fan drive - Electronic auxiliary module with keypad - Top-Air pre-cleaner - Control lever lift lock for add-on lever set - Operator seat with pneumatic suspension Grammer 24V - Radio installation kit 24V - Rear view monitoring with camera and monitor - German/Luxembourg version Godpjy Dt A Tjfx Ak Uebt - Operating manual GT list A powerful and comprehensively equipped wheel loader, suitable for demanding tasks in construction, recycling, industrial applications, and material handling. Sale is made without warranty and liability.

Year of construction: 1997, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 150 ton Gbedozz Tykepfx Ak Uet THROAT DEPTH: 400 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm UPPER BEAM TRAVEL: 415 mm MOTOR POWER: 15 kW CONTROL UNIT: CYBELEC DNC 900 WEIGHT: 12800 Kg OVERALL DIMENSIONS: 4000 x 2400 x 3200 mm ACCESSORIES: HYDRAULIC TOOL LOCKING ; HYDRAULIC CROWNING

Condition: used, Year of construction: 2019, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Gbsdpfszw D Haox Ak Uot Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with comprehensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed speed: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm, including the depicted ducting to 200mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Upper pressure: manual adjustment with crank and SIKO counter Infeed guide: manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue tanks for quick color changes from white to transparent Gbsdpfxjzn Afpe Ak Uot Gluing section with automatic edge infeed for roll material up to 3mm Pressure zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking Operating manual as a folder All indexable inserts of the milling units and the trimming blades have been renewed or re-sharpened; saws have been sharpened; diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been renewed, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses have been renewed. Approx. 1200 operating hours, i.e., only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Weight approx. 950 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this supplier."

Condition: used, mileage: 79,806 km, power: 103 kW (140.04 HP), first registration: 04/2018, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,500 mm, loading space width: 2,050 mm, Year of construction: 2018, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M495----VOLKSWAGEN CRAFTER 2.0 TDI FLATBED 4MOTION----KM: 79,806, WELL-MAINTAINED SERVICE HISTORY LAST INSPECTION WITH OIL CHANGE PERFORMED ON 13.03.2025 AT 76,576 KM ALL INSPECTIONS WERE PERFORMED IN A MANUFACTURER-AUTHORIZED WORKSHOP VEHICLE HISTORY AVAILABLE IN DIGITAL FORM 1ST OWNER----LIKE-NEW SUMMER TIRES----* HILL START ASSIST * BRAKE ASSIST * AIR CONDITIONING * RAIN SENSOR * START/STOP SYSTEM ----ALL-WHEEL DRIVE (4 MOTION)----8 TIRES 4 NEW OFF-ROAD M+S TIRES ON STEEL RIMS 4 SUMMER TIRES ON STEEL RIMS ----CARGO SECURING NET----TRENDLINE PACKAGE----CHROME PACKAGE----CORNERING LIGHTS----FOG LIGHTS----HEATED WINDSHIELD----1 WEDGE----FLATBED DIMENSIONS LENGTH: APPROX. 3.50 METERS WIDTH: APPROX. 2.05 METERS HEIGHT: APPROX. 0.40 METERS----TOTAL WEIGHT: 3500 KG UNLADEN WEIGHT: 2355 KG PAYLOAD: 1145 KG----* BLUETOOTH HANDS-FREE SYSTEM * MULTI-CD CHANGER * ON-BOARD COMPUTER * AUX INPUT * USB INPUT * SD CARD * ELECTRICALLY ADJUSTABLE AND HEATED EXTERIOR MIRRORS * ELECTRIC WINDOW LIFTS * ARMREST * CO-DRIVER'S SEAT CAN BE FOLDED DOWN INTO A TABLE * COMFORT DRIVER'S SEAT * LUMBAR SUPPORT * STORAGE COMPARTMENT IN THE CAB * 4 X 12V POWER OUTLETS ----Special equipment: * Airbag for driver/front passenger * Deactivatable front passenger airbag * Exterior mirrors, electrically adjustable and heated * On-board tools and jack * Chassis: Reinforced damping and stabilizers, front and rear Gbjdpfx Akjx U N Rbe Ujt * Spare wheel in driving condition * Rear mud flaps * Seats in the cab: Double co-driver seat with storage compartment and backrest that can be folded down to form a storage table * Side underrun protection Additional equipment: * Storage package 2 * Drive type: All-wheel drive * Audio system Composition Audio (radio, SD card interface, MP3 playback function) * Exterior mirror, convex, left * Exterior mirror, convex, right * LED turn signals integrated in exterior mirrors * Floor covering in the cab: Rubber * Chrome package * Double headlights * Dual-tone horn * Driving assistance system: Hill start assistant * Driving assistance system: Brake assistant (HBA) * Electric window lifts, front * Grab handles on A-pillars * Lockable glove compartment * Interior lights in the cab: LED * Interior lights in the cab: Footwell lights * Body/Structure: Standard flatbed * Radiator grille painted with chrome trim * Steering column (steering wheel) adjustable * Headlamp range adjustment * Truck registration * Marker lights on the side * Mobile phone interface Bluetooth * Engine 2.0 Ltr. - 103 kW TDI * Rear fog light * Wheelbase 3640 mm * Low emission according to emission standard Euro 6 * SCR system (AdBlue technology) * Power steering, electro-mechanical * Seat cover / upholstery: Fabric * Seats in the cab: Comfort driver's seat * Start/stop system for the engine * Power outlets (12V connection) in the cab (4 pieces) * Front bumper in gray with trim in vehicle color * Trendline, seat belt warning system (driver's side) * Heat-insulating glazing * Central locking with remote control and interior operation * Permissible total weight 3.50 t ----If desired, we will equip the vehicle with a tow hitch. Professional installation – quick and reliable, starting at 599 € ++ Exclusive offer at Autohaus Mat GmbH: Up to 1,000 € trade-in bonus – your advantage for changing vehicles! (only valid for commercial vehicles) ++ Contact us directly via WhatsApp: Why Autohaus Mat GmbH? 1. Attractive trade-in: We take care of the process.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 30160328026, power: 210 kW (285.52 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, nominal power: 210 kW (285.52 HP), This CHP unit comes from an investment that was never put into operation. Godjyzcxrjpfx Ak Ujbt

Condition: used, KHS triblock filling line 45-80-10 - KHS bottle rinser, Innoclean FR-EM 45 - KHS volumetric filler, Innofill EV-VF 80 with ENDRESS+HAUSER DOSIMAG A flowmeters - ALCOA KUPI 10/540 capper (max. 25,000 bph) Output: approx. 20,000 bph Gbjdpfx Aoychaisk Ujt Control system: S-7 Year of manufacture: 1998 Complete machine documentation – several folders.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation Gjdpfx Ajzt Nlmjk Usbt MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: used, machine/vehicle number: 04 897, consisting of: Rinser 15 Nozzles Vacuum filler 16 Filling valves Gbedpfx Akszx Ddne Ujt Screw capper 3 heads 22 mm screw cap

Year of construction: 2021, condition: used, Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage. Gbjdpozzdyujfx Ak Ujt

Condition: used, mileage: 272,145 km, power: 103 kW (140.04 HP), first registration: 03/2013, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 03/2028, color: grey, gearing type: mechanical, number of seats: 6, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, INTERNAL VEHICLE NUMBER: M631----FORD TRANSIT 2.2 TDCI MIXTO----KM: 272,145, SERVICE HISTORY AVAILABLE----LAST INSPECTION WITH OIL CHANGE AT 265,316 KM ON 03/05/2026----M+S TIRES ON ALUMINUM RIMS----* CRUISE CONTROL * SPEED LIMITER * ESP * REARVIEW CAMERA * FRONT CAMERA * AIR CONDITIONING ----STAND HEATER----FRONT WINDSCREEN HEATING----MIXTO----6 SEATS----FRONT BULL BAR----ROCKER PANEL PROTECTORS----TOW HITCH, TRAILER LOAD UP TO MAX. 2800 KG----* MULTIFUNCTION STEERING WHEEL * ELECTRIC SIDE MIRRORS * ELECTRIC WINDOW LIFTERS * WOODEN FLOOR * STORAGE COMPARTMENT IN THE ROOF AREA * BLUETOOTH HANDS-FREE SYSTEM * USB * ON-BOARD COMPUTER * ARMREST * STORAGE COMPARTMENT IN THE CAB ----Special equipment: * 2nd battery * Audio-navigation system Ford SD * Audio/radio remote control on the steering wheel * Radio preparation * 4 speakers * Rear wing doors (opening angle 255 / 270 degrees) * Body/structure: Box, double cab standard * Window in the cargo/passenger compartment: fixed * 1st row left * Window in the cargo/passenger compartment: fixed, 1st row right * Cargo area partition behind the 2nd row of seats * Sliding door, cargo/passenger compartment, right * Metallic paint * Stand heater * Auxiliary heater * Preparation package for mobile phone * Voice control and Bluetooth interface * Second key with folding remote control Additional equipment: * Airbag, passenger side * Airbag, driver side * Turn signal integrated in the side mirror * Tachometer * Electronic differential lock (EDS) * Rear wing doors without glazing * Heater with recirculation * Body variant: medium-height roof * Body/structure: box, high-roof standard * Headlight range adjustment * Engine 2.2 L, 103 kW TDCi CAT * Production facility: Otosan * Wheelbase 3750 mm * Wheel covers * Low emissions according to exhaust standard Stage 5 / Euro 5 * Sliding door, cargo/passenger compartment, right * Mud flaps, front and rear * Side protection strips * Visibility package 1 * Exterior mirrors, electrically adjustable and heated * Seat package 22: Driver's seat (3-way adjustable), passenger's double seat * Seat cover / upholstery: fabric * Seats in the cab: Driver's seat, height-adjustable * Seats in the cab: Passenger's double seat * Bumpers partially painted * Radiator grille in vehicle color * Trend * Tinted glazing * Lining in the cargo/passenger compartment: hard fiber ----Upon request, we can retrofit the vehicle with a tow hitch. Professional installation – quick and reliable, starting from 599 €. +++ Exclusive offer at Autohaus Mat GmbH: Up to 1,000 € trade-in bonus – Your advantage when changing vehicles! +++ Contact us directly via WhatsApp: Why Autohaus Mat GmbH? 1. Attractive trade-in: We take over the processing quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit from purchasing a new model. Gbjdozz Uyrjpfx Ak Uot 2. Individual financing solutions: Would you like to finance your new vehicle? We offer tailored financing solutions adapted to your needs: * With or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will support you from the initial consultation to the vehicle handover. 4. Our additional services: In addition to the vehicle purchase, we offer exclusive services for a smooth process: * Worldwide vehicle sales: Support with purchasing and exporting, wherever you are. * Transfer license plates:

Condition: used, Year of construction: 1997, Type: 12/24/1, Year of construction 1997; Rinser - filler with neck-handling - capper (PCO 28 and sports cap); direction: right-left; formats: 500 ml + 1500 ml PET, for 28 mm PCO28. Godpfx Akozx Avcj Uebt Dimensions: Rinser 1.500 mm x 1.500 mm x 2.750 mm; Füller 2.000 mm x 1.800mm x 2.850 mm; Verschließer 1.000 mm x 800 mm x 2.750 mm. The height is because of the security case around the machine.

Condition: used, Year of construction: 2017, Kerzenfilter 1-fach Candles: 01 cartridge type: code 41 with fin end, 3 locking tab ext 222 O-ring Godpfx Aozzphwjk Uebt

Year of construction: 2006, condition: ready for operation (used), An inspection is possible. Gbsdpfx Aksqvnmbj Ust

Condition: used, maximum load weight: 13,616 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Vehicle No. G0123198_1 – Manufacturer: Kögel. Gsdpezz Uxbefx Ak Uebt * Sliding roof cover * Double corner brackets * Insertion bar (aluminum) * Outline marking on side/rear * Load certificate Code-XL * Portal door with double swivel latch closures (inside) * Side sliding cover * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points * Perforated pallet stop bar Used roof cover. Financing possible. Storage container weatherproof, secure closure, floor in good condition, no further repairs required. Delivery time: IMMEDIATELY AVAILABLE. Multi Lock outer frame. Used cover. Technically ready for use, no further repairs needed. Substructure with signs of wear. UVV compliant. UVV documents available. Isolated paint chipping on components of the demountable body. LASI CODE XL!!! Dimensions are approximate. Offer subject to change, and we reserve the right to sell prior to acceptance. Prices are net ex warehouse D-59302 Oelde. Further details available upon request by telephone or email.

Condition: used, maximum load weight: 13,370 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Vehicle No. G0123008 – Manufacturer: Krone. * Sliding roof cover * Insertion bar (aluminum) * Outline marking on the side/rear * Load certificate Code-XL * Portal door with double rotating rod locks (inside) * Side sliding cover * Forklift accessible * Fixed support legs Gbjdjzz Uxnepfx Ak Ust * Device for rail loading * Lashing recesses * Lashing options Financing available upon request. Financing possible. Storage container – weather-resistant, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY. Cover is used. Technically ready for operation without further repairs. Substructure (KTL) coating with signs of use. Valid UVV certificate. UVV documentation available. Isolated paint peeling on components of the swap body. Deformations/stops on components – see images. LASI CODE XL!!! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request; please contact us by telephone or email.

Condition: used, mileage: 1,022,266 km, first registration: 06/2016, Year of construction: 2016, Scania R 450 Topline MEGA - Tractor Unit for Special Transport with Retarder All service and repairs at Scania! • EURO 6 • Intarder • Trailer anti-theft brake • Automatic transmission • Differential lock • Hill start assist • Adaptive cruise control • Emergency brake assist • Lane departure warning • Exhaust gas reducer • Automatic climate control • Auxiliary climate control • Full air suspension • Auxiliary heating: hot water • Partial leather comfort driver's seat: heated and ventilated • 2 recliners • Air horns • Lamp bar with additional headlights • Rotating beacons • Full spoiler • CB radio • Telephone • USB port • Hi-Fi speaker system • Coffee machine • Side table • Multifunction steering wheel • 700 + 700 liter aluminum tanks • Wheelbase: 3,800 mm • Unladen weight: 8,636 kg • Gross vehicle weight Weight: 18,000 kg • Tires: 385/55 R 22.5 front; 295/60 R 22.5 rear • Tire tread: 10/10/7/5/6/6 mm - German vehicle! - MOT/TÜV: NEW! Gbsdpfswmn Tfox Ak Ujt Subject to errors and prior sale!