Used 2 Locker for sale (44,668)

Condition: excellent (used), Rolls Royce Engine attached to 2 x Woma 400z high pressure water jetting pumps. Total operational hours - 1030 hrs Bwvsdbd9X0 2 x 400Z with P30 plungers. 1000bar at 250litres per minute. This is a very reliable unit, has been used for tube bundle cleaning.

Condition: good (used), Code: 0555 B2Crpw8Bd3 Brand: STEMA 2 BR Model: INSERMATIC CB/86 - CE Standard Drilling and inserting machine for furniture hinges , kitchens, cabinets, furniture in general - CE Standard Technical data: Drilling unit: Electropneumatic unit with motor Hp 2- 3000 rpm - Works from bottom to top, from under the panel - Drilling head: 3 spindles for hinges - 2 spindles for mounting plates Hinge insertion unit: N°1 single loader Worktable: rubber-coated rollers width 500 mm N° 6 mechanical stop blocks Suction 1 mouth diameter mm 80 Panel clamping: N° 2 vertical pressers Volt 380/50 Compressed air 6 atm Overall dimensions: mm 3600 x 1300 x 1300 h Weight kg 530

Condition: like new (used), In this offer you purchase a used Rotate-Crease and Trim module ‘Plockmatic RCT II’ Object of sale: 1 x RCT 2 for: Plockmatic PBM350 Plockmatic PBM500 Further accessories also in stock Meter readings: Total: Approx. 2,617 booklets Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Bxtk08Xkbq Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, Geared electric motor, 8.5/1.4kW, angular drive, clutch, brake elevator motor Drive electric motor, 8, 5/1, 4kW, rev. 9-54 angle drive Lift motor Ziehl-Abegg Rfzu180.31-2/12 380V / 50Hz 8, 5/1, 4kW Drive torque: 1114 Nm Rev.: 9-54 rpm Angular drive, clutch, brake gear several pieces for sale from stock. Dppsc7

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 1955, Operating hours: 1,500 h, Power: 7.35 kW (9.99 HP), Fuel type: diesel, Fuel consumption per hour: 3 l/h, Maximum speed: 35 km/h, Color: green, Working width: 1,000 mm, 2 Holder Diesel type EDII, year of construction 1955, 500cm³, with various accessories such as reversible plow, harrow, potato hoe, etc. One Holder 4 wheel with drive axle all wheel up to 35Km/h various crawling gears for off-road . with hydraulic foot brake, hand brake. Only for sale as a package. The vehicles start very easily. Price VB Gok0N0

Condition: used, Year of construction: 2015, Functionality: unexamined, Load capacity: 27 kg, Controller manufacturer: Yakasawa, Controller model: FS100, Control cabinet width: 450 mm, Control cabinet height: 200 mm, Type of input current: three-phase, Payload: 27 kg, Control cabinet length: 400 mm, We have for sale 2 Motorman / Yakasawa robots. one with a 12kg payload (manufactured in 2016) and the other has 27KG (manufactured in 2015). They both have Teach pendants and controllers. Both robots remain untested but were working when removed. Collection only from CV47 8HA United kingdom Upfepd2Edp

Condition: used, Travel distance X-axis: 800 mm, Travel distance Y-axis: 520 mm, Travel distance Z-axis: 510 mm, 2x Stama MC 734 MT 6-axis milling machine with robot Stama MC 734 MT (machine number 5) Tool magazine 48 pieces on chain and 90 pieces in additional magazine B2Qjaktqpc Milling spindle 12000 rpm Capto C6 tool holder Fanuc Series 31i-Model A5 control Coolant system and chip conveyor Operating hours: approx. 48974h Machining time: 19357h Travels: x 800 mm, y 520 mm, z 510 mm Rapid traverse 60m/min Stama MC 734 MT ( machine number 6 ) Tool magazine 48 tools on chain and 90 tools in additional magazine Milling spindle 12000 rpm Capto C6 tool holder Control Fanuc Series 31i-Model A5 Chip conveyor Operating hours: approx. 16482h Machining time: 14456h Travels: x 800 mm, y 520 mm, z 510 mm Rapid traverse 60m/min One coolant system for both machines. Robot Västerås: Clara suction unit not included ! More photos on request You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Company names and trademarks are the property of their owners and serve only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Year of construction: 2016, Code: 0375 Brand: MACO 2/L Model: 400/C - CE Standard 3-works Combined machine (Surface planer/Thickness planer/Mortiser) for wood, composite materials, plastics - CE Standard - Year 2016 Technical data: Surface planer: Milled and rectified cast iron tables Worktable dimensions mm 400 x 1800 Knife shaft diameter mm 70 N° 3 knives Thickness planer: Wood passage mm 4-220 Feed speed 7 mt/min Work table mm 400 x 760 Mortiser: Work table mm 250 x 500 Longitudinal/transverse/vertical stroke mm 205/95/90 Spindle mm 0-16 Single-phase motor Hp 3 Overall dimensions mm 1950 x 1100 x 1100 h Weight kg 390 C93Bqte

Condition: not inspected (used), In this offer you purchase a used intraoral scanner ‘iTero Element 2’ Object of sale: 1 x iTero Element 2 No password Bognabtj8Qr Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, Functionality: fully functional, Rotational speed (max.): 90 rpm, Electrovariable electric motor 1.8kw, 3.2-90 1/min Dppsfd Manufacturer: Getriebebau NORD 32-RV30-90 L/8-2 BRE16 Power: 0.45/1.80 kw Voltage: 230/400 V 50Hz 0.31A Rotation: 3.2-90 1/min IP44 Shaft diameter: 40mm Weight: 50kg Gearbox: Manufacturer: Getriebebau NORD Type: 90L/8-2 BRE16 IP54

Condition: as good as new (ex-display), Shell end mills (24340) Diameter 86 mm and length 62mm Kxhyhoux Diameter 97 mm and length 63 mm Weight 4, 5 kg

Year of construction: 2017, Condition: excellent (used), Machine/vehicle number: SI8x4125, DEMAG KBK crane canopy crane runway with dimensions approx. 6x5m (5m bridge) This crane is available several times ! Payload / lifting capacity 125 KG - 0,125to Technical data of the system: Iswgja3 Crane runway made of Demag KBK1 + KBK2L rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Crane is with internal power supply incl. 125KG Demag DC chain hoist - lifting height approx. 3.5m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: new, Year of construction: 2024, Functionality: fully functional, Usable height: 500 mm, Outer dimension width: 835 mm, Outer dimension length: 1,240 mm, Payload: 1,000 kg, Hello, I sell sheeted containers - metal 1/2 new - dimensions 1240 x 835 x 500 mm E2Pp7Kq - weight of the container about 55 kg - payload 1000 kg - new containers - price 115 eur/net/unit. - sale only against VAT invoice

Condition: excellent (used), CATALOG NO. 7241 TECHNICAL DATA - inlet width 450mm - inlet height 230mm Dflla2Pxj - shaft width 480mm - shaft diameter 380mm - number of knives 4 pcs - sieve size 50x40mm - toothed shaft pulling from above and below - shaft motor approximately 2×1.5kW - electric autoreverse - with conveyor belt - feed belt length 2190mm - feed belt width 440mm - front/backward belt feed - feed motor 1.5kW - main engine 30kW - dimensions length/width/height 3730x1670x1200mm - weight 1750kg – German production – used chipper, very good condition Net price: PLN 76900 Net price: EUR 17477 depending on the price of EUR 4.4 (Prices may vary with higher fluctuations)

Condition: excellent (used), Load capacity: 2,000 kg, 3 pieces SEVERT 3-axle turning and turning positioner 2000 kg load capacity, clamping disk diameter 0.8 meter have proven themselves in the field of construction and agricultural machinery, commercial vehicles, industrial trucks as well as in the aviation and energy technology sectors. With their stable and robust design, flexible positioning over three axes and easy operation, they make welding easier. easy operation, they facilitate the welding, assembly and handling of large workpieces. workpieces. Faster production, increased productivity Optimum positioning of the workpiece improves the welding quality and enables a higher deposition rate. deposition rate Improved safety, dangerous crane handling is greatly reduced B0Z2Cryzo Simultaneous positioning of up to three axes without time-consuming reclamping Simple operation and ergonomics during processing protect and relieve the operator Flexibility thanks to modular adaptability and customer-specific special designs possible The basic principle: By positioning the support arm rotary axis above the clamping plate, the support arm acts as a counterweight to the workpiece. counterweight to the workpiece. The machines are therefore considerably more powerful than turn-tilt tables or turn-tilt positioners. This principle makes it possible to handle the specified specified loads in any position. Due to the endless rotation of the 2 axes and the additional height adjustment, all workpiece positions (even overhead) are possible. possible. Speed of turntable adjustable, with remote control Dimensions: Height approx. 3.0 m Stroke: approx. 2 meters Arm projection approx. 2.4 meters with adjustable clamping plate Technically flawless without defects Price for 1 piece with purchase of all machines 14.900.-€ p. pc.

Condition: new, In this offer you purchase a new booklet finisher ‘Canon Bookletfinisher AN-2’ Object of sale: 1 x Canon AN-2 suitable for the following machines: Canon imagePRESS C10000VP Canon imagePRESS C8000VP. Condition: The device is tested for function Packaging and dispatch: Latvj9Yk You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: good (used), Tailstock Quill size: MK 2 Quill stroke: 30 mm height-adjustable 9Nhatip0T Tip height of 250-285 mm of - 5 degrees to plus 15 degrees of tilt Floor area 230 x 155 mm Weight 27 kg

Condition: used, Year of construction: 1962, Functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min Gpd87S From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Overall weight: 18,000 kg, Empty load weight: 5,600 kg, Maximum load weight: 14,400 kg, Axe configuration: 2 axles, Loading space length: 11,560 mm, Loading space width: 2,550 mm, Loading space height: 900 mm, Next inspection (TÜV): 08/2025, Suspension: steel, Tire size: 275/75 r17,5, Color: orange, Year of construction: 1998, Condition: ready for operation (used), Functionality: fully functional, Equipment: Abs, Low loader with mechanical DRIVING RAMPS C93Bis3 CONVERSION TO 12V POSSIBLE

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Machine/vehicle number: 22000m3/h, Ravent industrial exhaust fan, chip/dust filter fan, cyclone 22000m3/h /ct1730/ Manufacturer: Ravent Type: KLVK-50/2 Year of manufacture: 2005 Suction nozzle diameter: 650mm Outlet diameter: 565mm Impeller diameter: 500mm Electric power: 18.5kW, 400V, 50Hz, 32.8/18.9A Capacity: 22,000 m3/h Bgog2Qx230O Cyclone dimensions: 1350x1700x2500

Condition: like new (used), Year of construction: 2015, For sale is a working and very well maintained gas burner, brand WEISHAUPT Monarch WM G20/2-A (2100 kw) incl. gas fitting Dungs DN 65 and WEISHAUPT WM G20/2-A (2100 kw) - Output : 150- 2100 kw Celodp3J8V - Connection pressure : 15-500 mbar - Version : ZM - Delivery is possible on request - All technical data can be seen in the pictures Preferential sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors.

Condition: refurbished (used), hydraulic feed drive units, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - left execution - incl. additional pump 1 unit for KME 2 or BM - right execution - without additional pump Cy32Vfej

Condition: used, Year of construction: 2014, The portal hydraulic press is designed for bending or straightening and ready-made welded elements as well as for dismantling of mining and other machine assemblies. It is used in mechanical, production, renovation, etc. Producer: PATENTUS S.A. Type: PAT 300-2 / 250-2 Year of production: 2017 Technical parameters: B2X8Jlxpfw Dimensions: width: 4200 x 3140 mm, height: 3600 mm Weight: 25,000 kg Table surface: 4,200 mm x 2,140 mm Gate 1 cylinder diameter: 2 x 300 mm Gate 2 cylinder diameter: 2 x 250 mm Force of the cylinders gate 1: 2 x 1768 kN Force of the cylinders gate 2: 2 x 1228 kN Ground clearance max. 1240 mm Working cylinder stroke: 600-660 mm Goal travel: 1420 mm Equipment: - two goals - table - working cylinders x 4 - gate movement actuator - working cylinder displacement cylinder - power unit with a T-100/30 pump (2006 with renovation in 2011) Technical condition: used, for inspection

Condition: excellent (used), Functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Dpqaet Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table

Condition: excellent (used), Year of construction: 2014, For sale is a working and very good condition dual fuel burner brand Weshaupt monarch RGL60 ,gas line Dungs DN 100 Weishaupt RGL60 (dual fuel burner) Design : ZMD Output : 800-6900 KW 120 - 580 k/h Set pressure : 30 - 170 mbar - Delivery is possible on request - All technical data can be seen on the pictures Preferential sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. Gyrius The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities.