Used Load Turning Device for sale (47,792)

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm Crsdpfshcnhmsx Ab Tjk - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Condition: refurbished (used), Index ER 25 Long turning device Crjdpfofc Rmcsx Ab Tsk GT 2351.1300 3 pieces in stock

Condition: like new (used), Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from cross sense (crosswise) to longitudinal sense (lenghtwise) Separate electric and command panel (unique with QZ0170A) Crsdpfsc Ux Tmsx Ab Tjk 1st Table (cross) with motorized rollers (mm 2200 x 1850 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 4800 (ca.)

Condition: ready for operation (used), adjustable, Crjdpfx Aoha Hhzob Tok

Condition: good (used), Container turning device, welding turning device, roller stand, rotators, pipe straightening system -Container turning device: 4 pieces -Rollers: Ø 75 x 28 mm plastic -Roller spacing: 95 mm -Frame: cast aluminum -Shipping/Price: complete -Dimensions each: 230/185/H90 mm -Weight: 3.7 kg/piece Crsdpfx Aowyt Smeb Tsk

Year of construction: 2017, condition: excellent (used), I sell the turning device AUTOMATICA DVPGP. Year 2017. One side feeding suitable for line. Credpfew Am Ndox Ab Tek Element width up to 1400mm Total length 4500mm Available immediately. Ready for work, possible to test.

Year of construction: 1985, condition: good (used), machine/vehicle number: XXXX, Lg.No. 21392 Technical data approx: - Total payload driven + travelling unit 25000 kg - payload per container device 12500 kg - workpiece diameter approx. 500 - 4000 mm - center distance of the support rollers adjustable - roller diameter 400 mm - roller width 120 mm - infinitely variable rotation speed - manual remote control for Re- and Li.-run Cedsk Eatdspfx Ab Tjrk - drive 400 V - space requirement attached unit approx. W 3500 x H 850 x D 1000 mm - space requirement with running unit approx. W 2700 x H 850 x D 800 mm - Weight of driven unit approx. 1300 kg - Weight with running unit approx. 900 kg

Condition: like new (used), Year of construction: 2022, Stierli- ROTATOR 600 / 6 to 360° turning device for fast and safe turning and rotating of beams, profiles and welding components. Use for welding, plastering, fast welding visual inspection, as assembly turning device etc.... Capacity: 6 tons Swing circle diameter: 600mm (e.g. beam HEB 600) Length of parts: freely selectable (stands are freely positionable by means of hand pallet truck) Adjustment of working height: Steplessly adjustable Crjdpfegqgb Uox Ab Tsk The Stierli rotator was developed to turn heavy and large loads such as beams and welded constructions quickly and safely without a crane. This saves you a lot of working time and increases productivity. This welding positioner or welding manipulator works as a lifting turning device with reliable chains. The turning device is not only used for beam welding, but other cross sections can also be turned with it, such as the use as a pipe turning device. Loading is impressively simple with the overhead crane, or by means of forklift loading. The rotator can be brought into position very easily with the hand pallet truck, whereby the distance between the uprights of this welding device is freely selectable.

Condition: like new (used), Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Separate electric and command panel Crodpsc Ux Tlsfx Ab Tsk 1st Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers (mm 2200 x 2550 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 5500

Condition: new, Year of construction: 2025, workpiece weight (max.): 3,000 kg, – Capacity 3 tons – Workpiece minimum Ø 70 mm – Workpiece maximum Ø 1200 mm – Roller diameter 200 mm – Stepless speed adjustment – Digital speed display – Speed 100/1050 mm/sec – Foot pedal Cedpfx Ajwygh Ijb Terk – Emergency stop – Documentation – 230V

Condition: good (used), Container turning device, welding turning device, roller stand, rotators, pipe straightening system -Container turning device: 2 pieces -Rollers: Ø 100 x 37 mm plastic -Shipping/Price: complete -Dimensions: 260/230/H115 mm Codpfx Aowypa Hjb Tjrk -Weight: 1.7 kg/piece

Year of construction: 1980, condition: good (used), Offer 15107 Technical data: - Total payload driven + travelling unit 60000 kg. - payload per container unit 30000 kg - workpiece diameter 500 - 4000 mm - Adjustable center distance of the support rollers Crodpekqxn Dsfx Ab Tjk - Support rollers made of steel - roller diameter 650 mm - roller width 200 mm - infinitely variable rotation speed - manual remote control for Re- and Li.-run - drive 400 V - space requirement attached unit approx. W 5100 x H 1000 x D 1500 mm - space requirement with running unit approx. W 3500 x H 1000 x D 1000 mm - Weight of driven unit approx. 4500 kg - Weight with running unit approx. 3300 kg

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Csdpfxod Siydo Ab Tsrk Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3

Condition: used, Container turning device, welding turning device, roller block, rotators, pipe straightening system, roller block turning device -Roller block: container turning device, without drive -Roll spacing: 290 to 1205 mm -Rollers: 4 pieces on both sides Ø 230 mm, total width 282 mm -Load capacity: kg Crodpfx Abou Tlg Se Tek -Dimensions: 940/640/H835 mm -Weight: 445 kg

Year of construction: 1990, condition: good (used), machine/vehicle number: XXXX, Lg.No. 14154 Technical data approx: - Total payload 2000 kg Crodpfx Ajk H D I Aeb Tsk - Load capacity per container device 1000 kg - Support rollers made of steel - center distance of the support rollers 130 - 580 mm - center distance left + right adjustable in 6 rasters - roller diameter 80 mm - roller width 120 mm - height adjustable working height by threaded spindle - min. / max. working height 650 / 950 mm - space requirement approx. W 750 x H 950 x D 650 mm - weight each approx. 120 kg

Condition: good (used), Container turning device, boiler turning device, welding turning device, welding turning device, welding turntable, welding turning device -Container turning device: Welding turning device on rail chassis -Drive motor: 0.55 kW / adjustment motor 0.085 kW Credpfx Abov Uwlno Tsk -Load capacity: 5000 kg -Roller spacing: 270 - 870 mm, rollers Ø 230 x 150 mm total width -Unwinding speed: 0.025 to 1.0 m/min Right/left rotation, Left rotation only continuous operation -Control unit: with hand control and foot pedal -Rail width: internal dimension 940 mm -Individual components: see photos -Transport dimensions: 1020/1020/H635 mm / 1020/500/H635 mm / 600/480/H955 mm -Total weight: 844 kg

Condition: good (used), Year of construction: 1991, machine/vehicle number: D 206806, Offer 25076 Technical specifications: - Driven unit, fixed + guided unit, movable on rails - Total load capacity 3000 kg - Load capacity per container device 1500 kg - Container diameter 100 - 2500 mm - Adjustment of the container diameter - By pivoting the support arms, locked with locking pins - Roller diameter 250 mm - Continuously adjustable rotation speed approx. 60 - 1200 mm/min - Min. distance / max. distance between fixed and movable unit Credpfx Aov Srgzjb Tjk - 1090 / 3200 mm - Separate control cabinet - 400 V drive - Space requirement approx. W 4300 x H 900 x D 1600 mm - Total weight approx. 1200 kg

Condition: used, Container turning device, welding turning device, roller block, rotators, pipe straightening system, roller block turning device -Roller block: container rotating device -Roller spacing: 215 to 1470 mm -Rollers: Ø 200 mm -Load capacity: about 2000 kg -Number: 1 piece available -Dimensions: 1720/500/H500 mm -Weight: 136 kg Cedpjhd Rq Ajfx Ab Terk

Year of construction: 1998, condition: good (used), Offer 23126 Credonwmt Ijpfx Ab Tok Technical data: - Total payload driven + travelling unit 20000 kg. - payload per container device 10000 kg - workpiece diameter approx. 500 - 3500 mm - center distance of the articulated support arms man. adjustable - Roll diameter 4 x per support arm 250 mm each - roller width 4 x each support arm 80 mm - infinitely variable turning speed approx. 100 - 1500 mm/min - manual remote control for Re- and Li.-run - drive 400 V - space requirement with running unit approx. W 1700 x H 1100 x D 1000 mm - space requirement with running unit approx. W 1700 x H 1100 x D 700 mm - Weight attached unit approx. 1400 kg - Weight with running unit approx. 1000 kg

Condition: good (used), container turning device, boiler turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning device Cjdevt Rcdepfx Ab Tsrk -Container turning device: welding turning device -Load capacity: 5000 kg -Drive motor: SEW Eurodrive 0.37 kW -Unrolling speed: 100 to 600 mm/min right/left rotation -Roller spacing: 270 - 960 mm, rollers Ø 230 x 159 mm -Transport dimensions: 1200/740/H745 mm / 870/430/H745 mm -Weight: 378 kg / 275 kg

Condition: used, Turning device, forging device, welding turning device, welding device -for: production of spirals, springs ... Crodpfxscvpuao Ab Tsk -Holder: Ø 88 x 300 mm -Speed: 31 rpm -Drive: 1.5 kW -Voltage: 400 V -Dimensions: 1000/550/H1200 mm -Weight: 120 kg

Condition: used, Container turning device, welding turning device, roller block, rotators, pipe straightening system, steady rest -Roll diameter: Ø 80 mm -Roll distance: 90 mm -Dimensions: 300/100/H118 mm Cjdpjd Nzgysfx Ab Tork -Weight: 7.7 kg

Condition: used, Container turning device, welding turning device, roller block, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling flame straightening -Drainage channel and water pump -Roll diameter: Ø 180 mm -Drive: PIV gearbox -electric: adjustable -Load capacity: 1 to -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Hand switch -Counter bearing: laterally adjustable -Dimensions drive: 3600/820/H850 mm Cedpfx Aocp Nvyeb Tork -Dimensions counter bearing: 2950/820/H850 mm -Own weight: 1300 kg

Condition: used, Container turning device, welding turning device, welding turning device, welding device, welding turntable -Max. Diameter: 430 mm -Drive: 0.18 kW -Speed: min. 0 mm/min Cedpfsb A Nptjx Ab Tsrk -Speed: max. 1190 mm/min -adjustable: electronically -Foot switch -Dimensions: 1100/600/H1600 mm -Weight: 166 kg

Year of construction: 1974, condition: used, Container turning device, welding turning device, roller block, rotators, pipe straightening system -Roll diameter: O 160 mm -Electronic drive: adjustable -Manufacturer: APS Typ -Load capacity: max approx. 3000 kg -Speed: min. 80 mm / min -Speed: max. 2000 mm / min -Foot switch -Admission of pipes to be welded min .: O 250 mm -Acceptance of pipes to be welded max .: O 2000 mm Crsdpfxsd Spi Ds Ab Tjk -Laterally adjustable castors: 400 mm - 805 mm -Counter bearing length adjustable on: Rail system -Transport dimensions: 2070/2000 / H1110 mm -Own weight: 1219 kg