Used Letter Press for sale (13,182)

Condition: new, Year of construction: 2026, operating hours: 8 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Djdoxfwdspfx Ac Hjci Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Year of construction: 1982, Hydraulic press JKM Kindsmüller UPS 100 E – 110 tons Dcodey Unl Repfx Ac Hji For sale: a hydraulic workshop/industrial press, JKM Kindsmüller, type UPS 100 E. Technical specifications: * Pressing force: 1100 kN (110 tons) * Operating pressure: 283 bar * Stroke of upper piston: 700 mm * Year of manufacture: 1982 * Control system overhauled/renewed in 1992 * 400 V connection The machine can be inspected by arrangement.

Condition: used, Year of construction: 1980, For sale is a robust mechanical eccentric press / stamping press from the manufacturer MGR. The machine is ideally suited for punching, forming, and pressing operations in the metalworking industry and comes from industrial use. Technical data: Manufacturer: MGR Type: 45R Year of manufacture: 1980 Pressing force: 45,000 kg (45 tons) Dedpoy Unmbofx Ac Hjci Stroke: 230 mm Ram stroke: 80 mm Ram adjustable: 55 mm Adjustable stroke: 9 – 120 mm Motor power: 3.5 hp Voltage: 380 V Machine no.: 311860

Condition: excellent (used), functionality: fully functional, Machine is in a very good condition, works with no problem at all! Dcsdpfx Aeim Si Rsc Hei Feel free to come and inspect machine under power upon appointment!

Condition: good (used), functionality: fully functional, Year of construction: 2008, Pressing force: 170 t Bending length: 3550 mm Control system: ModEva 12 S Oil capacity: 350 l Total power requirement: 26 kW Dcodpfx Aozh Ur Ujc Hei Machine weight (approx.): 16,500 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 225 t, stroke length: 300 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, throat depth: 500 mm, clearance between the columns: 3,700 mm, overall weight: 20,500 kg, Equipment: CE marking, safety light barrier, Hydraulic press brake Guifil FCS-40225 PLS, manufactured in Portugal, is a heavy-duty machine designed for high-capacity sheet metal bending. With a bending force of 225 tons and a working length of 4000 mm, this model is well suited for processing large and thick materials in industrial environments. The machine features a robust frame construction ensuring high rigidity and stability during operation, even under maximum load. The hydraulic system provides smooth and consistent performance, making it reliable for both single-piece and serial production. Dedpfx Aozkf Dmec Hoci Equipped with a Delem CNC control, the press brake allows precise programming of bending sequences and ensures repeatable accuracy. The back gauge system (X and R axes) supports efficient positioning and reduces setup time, increasing overall productivity. This machine is a strong choice for companies requiring long-bed, high-tonnage bending capacity at a competitive investment level. The press brake is equipped with punches and dies. It has backgauge X1-X2-R-Z1-Z2.

Condition: ready for operation (used), Year of construction: 1999, Heidelberg Speedmaster 52 2 Max format 37 x 52 cm Min format 10.5 x 14.5cm Max speed 15000 per hour Max thickness - 0.03 x 0.4mm Weight 4.8 ton Djdpozkfvisfx Ac Hsci Dimensions - 2.9 x 1.85m New rollers Straight Autoplate Autowash Baldwing Weko

Condition: used, Year of construction: 2019, Overview This belt press was manufactured in 2019 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  - Capacity: 1,500 kg/h (apples) Dcjdpeyw Aa Iefx Ac Hei - Application: Juice extraction from crushed apples - Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system - Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems

Condition: new, pressure 200 t stroke 400 mm cylinder diameter 170 mm work height max. 900 mm Front light range 1330 mm Lateral light range 450 mm total power requirement 7,5 kW weight of the machine ca. 2600 kg dimensions of the machine ca. 2500x1100x2800 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge Dodpfxoyv Nd Ds Ac Hjci - Material supports adjustable in height by cylinder - CE mark

Condition: new, pressure 30 t stroke 170 mm distance spindle /table max. 700 mm Front light range 600 mm Lateral light range 195 mm weight of the machine ca. 200 kg dimensions 670 x 970 x 1900 mm Domestic equipments: - Stable welded construction Dcedpfx Aey Nnywsc Hsi - manually via hand lever - Pressure gauge via pressure gauge - CE mark

Condition: used, pressure 40 t throat 175 mm work height max. 1055 mm stroke 30 mm sheet thickness - max. 8 mm total power requirement 4 kW weight of the machine ca. 1020 kg Dodpfxsyv Nuis Ac Hsci dimensions 910 x 670 x 1930 mm

Condition: used, Year of construction: 1989, Erfurt press with 160-ton capacity, currently disconnected and drained, ready for transport. Dedpfx Acsxyp Axs Hsci

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Dcedpfozh Nnwjx Ac Hei Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: used, Year of construction: 2021, Overview This belt press was manufactured in 2021 by Germany AMOS INDUSTRIE. The machine is designed for fruit juice processing. It is still installed and can be visited in production on request.  Technical data  - Capacity: 1,200 kg/hour - Application: Fruit juice Dedpfx Acjzh Il Is Hoci - Configuration: Belt press - Operating hours: 200

Condition: good (used), Year of construction: 2019, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. The operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is made against prepayment, ex works, without any warranty. Djdpjzh Iigefx Ac Heci

Condition: excellent (used), CATALOG NUMBER 7993 TECHNICAL DATA - Loading fields: 2 - Side clamps, manually adjustable: 2x4 pcs - Vertical pneumatic clamps: 2x4 pcs - Max length of glued elements: 2500 mm - Max height of glued elements: 1330 mm Dcsdszh H Egjpfx Ac Hoi - Max thickness of glued elements: 110 mm - Guides for gluing thin elements - Dimensions (L/W/H): 3000x1350x2000 mm - Weight: 900 kg ADVANTAGES – Two working zones – Gluing length of 2500 mm – Pneumatic cylinders – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1990, operating hours: 83,000 h, functionality: fully functional, BRUDERER BSTA 50HL (500 kN, year 1990, Kom. 9443) Djdey S E U Ropfx Ac Heci Technical Specifications Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model: BSTA 50 HL Serial / Commission No.: Kom. 9443 Year of Manufacture: 1990 Operating Hours: 82,600.0 h (as shown on press control) Total Weight approx.: 8,700 kg Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Bolster plate — Width × Depth: 930 × 650 mm Baseplate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip pass-through width: 250 mm Feeding device: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 400 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Original technical documentation and schematics

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: Dedpfx Acowd N Rms Hjci • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Dedpofh Tmmjfx Ac Hoci Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: excellent (used), MAWEG Gluing Press Machine frame inclined at 10 degrees Single-sided loading Horizontal beam with manually adjustable height via hand crank (all clamping cylinders can be adjusted together) Hydraulic cylinders with quick clamping function, infinitely adjustable Manual hydraulic cylinder clamping Pressing force per hydraulic cylinder approx. 2000 kp Dcodpfxeyyn E Uo Ac Hei Hydraulic cylinder stroke 100 mm Clamping depth 100 mm Maximum clamping length: 2800 mm Maximum clamping height: 1800 mm 4 vertical pressing cylinders 2 horizontal pressing cylinders 6 counter-stops Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are ex-location and are pick-up prices – loading included! • The machines have been cleaned and function tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Dcedpfx Acsxgpaqo Hji Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: used, Year of construction: 2005, Used 3.6-meter CNC press brake by Ermaksan Dedpszh Icyefx Ac Heci Type: AP 3600 x 200 Capacity: 3600 x 200 tons Elgo NC control system 1 set of tooling Year of manufacture: 2005

Condition: used, Year of construction: 2017, Used 3-meter press brake from Safan Type: E Brake 100 3100 Capacity: 3100 x 100 tons Y1, Y2, X, Xdelta, R, Z1, and Z2 are CNC-controlled E Control Hydraulic WILA top clamping system 1 set of complete tooling Year of manufacture: 2017 Dcodpfjzh Ibvsx Ac Hei

Condition: ready for operation (used), Year of construction: 1969, Spindle bore diameter: 80 mm Dedpfxjzh Ibps Ac Hoci Bore: 15 mm Stroke: approx. 550 mm Overhang: 250 mm Table size: 300 x 370 mm Table cut-out: 85 mm Space requirement: 1000 x 800 x 2000 mm

Condition: excellent (used), functionality: fully functional, a complete workstation with integrated pneumatic system. featuring pneumatic two-hand release Force: 45 kN Dodpjzka Adefx Ac Hsci Stroke: 60 mm