Used Leeboy 5000 for sale (3,679)

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Rodsdzqptjpfx Ag Aech Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: LOOS, International Type: UL-S Heating surface approx.: 100 sqm Capacity: 5,000 kg/h Operating overpressure: 13.0 bar Test pressure: 24.7 bar Water content full approx.: 9,630 l Temperature: 195° C Year of construction: 2005 CE marking: CE 0036 Rcodjwrbq Iepfx Ag Ajh equipped with Weishaupt oil-gas burner RGL 50/2-A, design ZM-NR, 600-5,400 kW, oil consumption 95-453 kg/h, gas pressure 15-500 mbar gas control section DN80, feed water pump, separate control cabinet with boiler control touch panel, and the existing coarse and fine valves ECO Type: Eco 1 Manufacturer: LOOS Year of construction: 2005 max. permissible pressure: 31 bar test pressure: 56 bar max. permissible temperature: 238° C Heat output: 199 kW total volume: 78 l CE marking: CE 0036

Condition: good (used), machine/vehicle number: 48506487669078, Year of construction: 2018, operating hours: 3,149 h, load capacity: 5,000 kg, lifting height: 5,000 mm, overall weight: 7,000 kg, enginetype: Electric, manufacturer: Toyota Rcedpfx Ajw Ry Hwjg Ajh

Condition: ready for operation (used), Format: 320-640x320-860mm, weight: 7t. Rcodpfeht Hfiox Ag Ajh

Year of construction: 2011, condition: used, VERY GOOD AND SAFE FORKLIFT | SIGMA SERT. FEBR 2026| NEW FORKS. | VERY HIGH MAST| CUSSION TIRES . Rodpfx Aswnfrbsg Aoch

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm Rcjdpfxewvkgme Ag Aeh injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN

Condition: good (used), Lifting platform, car lifting platform, lifting device, lifting lift, pit jack, axle free jack, truck lifting device, axle jack Rodjikrpujpfx Ag Asch -Manufacturer: MWH Märkisches Werk Halver, truck lifting device pit jack -Type: Atlas LT -Load capacity: 2x 5000 kg -Lifting height: 1600 mm -Operating pressure: 60 bar -Accessories: included, see photos -Transport dimensions: 1000/940/H1400 mm -Total weight: 820 kg

Condition: used, functionality: fully functional, Hüttinger Elektronik GmbH + Co.KG DC Generator, 5000W, PFG 5000 DC Model: PFG5000DC Redpfjw Edp Hjx Ag Asch Condition: Used Technical Data: 3x400V AC 50/60Hz 6.3kVA General: Plasma frequency generator for magnetron sputtering Serial number: 24007007-010-001 Version: ID.458078 Output power: 5000 W DC

Condition: good (used), machine/vehicle number: 48506457063766, Year of construction: 2018, operating hours: 3,314 h, load capacity: 3,500 kg, lifting height: 5,000 mm, overall weight: 5,000 kg, enginetype: Electric, manufacturer: Toyota Rjdpfx Agjw Ry Hqj Aech

Year of construction: 2001, condition: ready for operation (used), Working width: 2200mm, number of fields: 6, with Three-Roller Foulard Beta, straightening unit Mahlo, weft unit Mahlo Movicat for punching basis weight samples, turret winder Brückner, heat recovery in the exhaust air 1x air/air stage and 1x air/water stage and electrostatic filter for cleaning the exhaust air. Rsdpepy Eufsfx Ag Asch

Year of construction: 2012, condition: excellent (used), Belt Pasteurizer Steiner Model: TP-1000-5000 Build: 2012 1heating zone up to 95 degrees 3 cooling zones Belt wide 900mm Belt long 5.000mm Infeed height 950mm adjustable Max product height 220mm Rjdpfeibyqqox Ag Aech Steam 70kg/hr (continue) 4 Circulation pumps

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Rcedpfjvkqfasx Ag Aoh Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h

Condition: used, Keyence Type: VHX-5000 Only 10 operating hours! Technical data: Frame rate: 50 F/S (max.) Resolution: Normal: 1600 (H) x 1200 (V) Approx. 1000 TV lines 3CMOS *1, *3: 1600 (H) x 1200 (V) Approx. 1200 TV lines (2 million pixels x 3CMOS mode). Excellent color reproducibility. High Definition*3: 3200 (H) x 2400 (V) Approx. 1600 TV lines Super fine*3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more 18 Megapixel x 3CMOS*2, *3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more (18 million pixels x 3CMOS mode). Excellent color reproducibility. High dynamic range: Each RGB pixel in 16-bit resolution Electronic shutter: Automatic, Manual, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 sec. to 4 sec. Adjustable in 0.1 sec. steps. White balance: Push-set, auto, manual, preset (2700 K, 3200 K, 5600 K, 9000 K) LCD monitor*5: Size color LCD (IPS) 23" Panel size 509.184 (H) x 286.416 (V) mm Rsdpfx Aewr Ax Hog Aoch Pixel pitch 0.2652 (H) x 0.2652 (V) mm Number of pixels 1920 (H) x 1080 (V) (FHD) Display color approx. 16.77 million colors *4 Brightness 300 cd/m2 (center 1 point, typical) Contrast ratio 1000:1 (typical) Viewing angle ±89° (typical, horizontal), ±89° (typical, vertical) Approx. 1,680,000 images (if a 2-megapixel image is compressed) up to approx. 55,000 images (if a 2-megapixel image is not compressed) Image format: With compression: JPEG; Without compression: TIFF Maximum image size 20,000 pixels (H) x 20,000 pixels (V) (with image stitching function) Light source: Super bright LED lamp Lamp life 40,000 hours (reference value) Color temperature 5700 K (typical) List of components: VHX-5000 control unit VHX-2000D digital microscope VHX-S90BE Free-angle Observation System base unit VHX-S90F Free-angle Observation System lens holder VH-Z250R Dual-light high-resolution zoom lens 250x - 2500x Condition: used Scope of delivery: (As shown) (Changes and errors in technical data and information excepted!) We are happy to answer further questions by phone.

Condition: good (used), Year of construction: 2013, MARK ANDY XP 5000 / 13" - 4-color  Year: 2013  Webwidth: 330mm / 13" Equipment:  UNWINDER  4 x FLEXO PRINTING  BST CAMERA Rcjdpfxstubz Us Ag Aeh  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER  100% TUBE SCAN CONTROL  REWINDER  Web edge control  Control Panel  Lot off printing/magnetic cylinder  Anilox Please contact me if you have any questions. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: like new (used), “GFA 2QL 5000/2000” for Sale Manufacturer: GFA Type: 2QL 5000/2000 Deck size: 2.000 x 5.000 mm Number of decks: 2 (Different deck-angle) Included: – Electrical Motor – Cardan Shaft – Springs Vibrating screen can be sandblasted and painted. Rcodpfx Ashcw T Ejg Ajh

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Rsdpewydgzsfx Ag Aech

Condition: good (used), Compressor, 8 bar, Worthington - Creyssensac - second-hand - : Price: 3.500.-€ (net), dismantled and loaded! Manufacturer: Worthington - Creyssensac Rcedpfofnbmhsx Ag Aeh Type: RL R 5000 AX2 Year of construction: unknown - could be 2000 Operating hours: unknown - to be clarified Bar max.: 8 m3/h: 395 KW: 37 V / Ph / Hz: 400/3.0/50 64 amps min-1: 3,000 kg: 790 condition: good

Condition: good (used), Year of construction: 2003, machine/vehicle number: 18220203, System for automated robot welding Mains voltage:3 x 400 V Mains voltage tolerance:+ /- 15 Mains frequency:50 / 60 Hz Mains fuse protection:35 A slow-blow Primary continuous current:18 - 29.5 A - 100 duty cycle Primary continuous power:13.1 kVA Power factor:0.99 Efficiency:0.9 Welding current range:MIG/MAG: 3-500 A Rod Electrode: 10-500 A TIG: 3-500 A Welding current:40 duty cycle: 500 A 60 duty cycle: 450 A 100 duty cycle: 360 A Welding voltage range:MIG/MAG: 14.2 - 39.0 V Rod electrode: 20.4 - 40.0 V TIG: 10.1 - 30.0 V Max. Welding voltage:49.2 V Open circuit voltage (OCV):70 V Dimensions (mm) H x W x D:626 x 287 x 477 mm Weights:35.6 kg Included in the scope of delivery: Power source on steel platform (RS 422 interface) Cooling unit (FK 4000-R) Fronius VR 1500 4R/W/E robot wire feed case Supply voltage 55 V DC Rated current 4 A Wire diameter 0.8 - 1.6 mm 0.03 - 0.06 in. Wire speed 0.5 - 22 m/min 19.69 - 866.14 ipm. Torque 4 Nm Protection class IP 21 Dimensions I x w x h 405 x 208 x 205 mm 15.94 x 8.19 x 8.07 in. Weight 7 kg 15.43 Ib. Drive 4 roller drive Maximum shielding gas pressure 7 bar 101 psi. Coolant Original Fronius coolant Maximum coolant pressure 6 bar 87 psi. Welding torch Robacta Drive W/E/6.25m Hose package 6.5m Rodpfxoqpgnts Ag Ajch Various wearing parts (e.g. pipe bends, gas nozzle, contact pieces) Suction unit with hose guide

Condition: used, Upright stack delivery with pressing unit Rcsdpfodix S Hjx Ag Aeh

Condition: good (used), MARK ANDY XP 5000 / 13"  Year: 2008  Webwidth: 330mm / 13" Equipment:  UNWINDER  7 x FLEXO PRINTING  Add. 1 x WATER COOLING  2 x DIE-CUTTING  LABELSHIFTER  BST CAMERA  UV-DRYER  REWINDER Rcodpfx Agjtubz Aj Ajh  Web edge Control  Control Panel  Optican for Sheeter  Lot off Printing/Magnetic Cylinder  Anilox

Condition: good (used), Manometer, test manometer, saw tension gauge Rodpfxow Adkrj Ag Asch -Manometer: Saw tension gauge -Type: 0 to 5000 kgs/cm² -Mounting: see photos, bore Ø 16 mm -Dimensions: 70/60/H160 mm -Weight: 1.0 kg

Condition: ready for operation (used), Year of construction: 2019, An unused Kemper extraction system for room ventilation in the production area is available. Filter class: H10, Filter method: Storage filter, Filter material: Nano-Cellulose, Separation efficiency: 99.9%, Dust class: M, Volume flow: 5000m³/h, Motor power: 3.35kW, Filter area: 50m². Machine diameter: approx. 1200mm, machine height: approx. 2700mm, weight: approx. 420kg, operating hours: 1h. Documentation available. On-site inspection is possible. Rjdswrrrcspfx Ag Aech

Condition: excellent (used), Year of construction: 2022, Also for direct use on the processing machine. RRP approx. €50,000 Documentation -Laptop including software -Measuring device with table and camera Rcjdpfev N Dzrsx Ag Ash -Measuring probe -Tripod for measuring in the machine or for large workpieces -Charger including spare battery for measuring probe

Condition: good (used), Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, incremental encoder -Manufacturer: Heidenhain, Incremental Encoder -Type: ROD 426.000B - 5000 .: 295 434 05 -Shaft: Ø 10 x 20 mm -Number: 2x encoders available Rsdpfx Ajw Ada Tjg Aech -Price: per piece -Dimensions: Ø125 x 100 mm -Weight: 0.5 kg/piece

Year of construction: 1998, condition: ready for operation (used), A Cookson dispensing machine for the SMT industry is available. Dispensing capacity 50 mil pitch solder paste: 25000 dots/h, dispensing capacity 3mm pitch SMD adhesive: 22000 dots/h, dispensing range X/Y: 450mm/450mm, travel X/Y/Z: 483mm/483mm/55.8mm, feed X/Y: 406mm/s, SMEMA compatibility: available. Including spare parts, seals, hoses etc. Documentation available. On-site inspection is possible. Rcsdpfxovx Tw Us Ag Aoh