Horizontal machining center

DMG MORI NHX 5000

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h Fsdpfx Aaeyt Hwzjlspg • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2018, operating hours: 5,500 h, functionality: fully functional, Control SIEMENS 840D SL Shopturn Swing diameter over bed 580 mm Swing diameter over slides 320 mm Max. turning diameter 320 mm Fjdpfxsyr I A As Aalepg X travel 242 mm Y travel +/- 40 mm Z travel 540 mm Distance between centers 780 mm Rapid traverse X/Z 30/36 m/min Rapid traverse Y 22.5 m/min Spindle speed 5000 rpm Spindle nose A2-6 Spindle bore D73 mm Through hole 51 mm Drive power 16.5/11 kW Turntable 12-station (with internal coolant supply) Spindle taper VDI30 C-axis programmable Tailstock sleeve Morse 4 Tailstock travel 550 mm Hydraulic action Power consumption 28 kVA Weight approx. 4400 g kg Dimensions (with chip conveyor) 2800 (3680) x 1780 x 1850 mm Accessories, Equipment - D210 mm SMW hydraulic chuck with 65 mm bore (spindle locked) - Chip conveyor (conveyor belt) - Coolant system - C+Y axes - Integrated tool measuring arm - Tailstock - Manuals

Condition: good (used), Year of construction: 2014, functionality: fully functional, number of spindles: 1, number of slots in tool magazine: 60, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical specification: - Horizontal spindle - Spindle HSK-A63 - Spindle torque 240 Nm (to be confirmed) - 4-axis machining - ATC for 60 tools Fpodpjyrfxhsfx Aaleg - Pallet changer (2 pallets) - Pallet size 500x500 mm - Coolant chiller - Coolant filtration system by Knoll - Coolant pressure 50 bar through spindle - Fanuc control system - Chip conveyor - Robot interface - Linear measuring systems (scales) - Manufactured in 2014

Condition: new, Year of construction: 2024, functionality: fully functional, Incorrect investment by a corporation. Machine is new and unused (already delivered). The machine is available immediately with no lead time. An extremely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: fully closed loop scale feedback (X/Y/Z) Fodpfxexizdao Aalepg Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optional 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: direct drive Minimum index: 0.001° Maximum speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: central spindle cooling Internal coolant: optional CTS 7 MPa Tool magazine: chain-type, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [for >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment / Options: - Workpiece probe - Tool measurement - Laser control (optional) - High-pressure coolant 7 MPa (optional) - Chip conveyor - Fully enclosed enclosure with roof Dimensions n.a. Weight n.a. Connection data n.a.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overhauled BRUDERER BSTA300 automatic punching press incl. new press control unit Technical data: ----- Tonnage 300KN Die installation opening 750mm Stroke rate 80-1400 (depending on selected stroke) Adjustment stroke 13, 16,19,25,32,38,44,47 Plunger adjustment range 51mm Tool installation height 171-239 mm (depending on the selected stroke) Clamping plate 740x480mm Ram area 630x360mm Belt passage width 206mm Base plate opening 710x160mm Fpsdpfxotvnlbo Aalog Belt infeed height 50-120mm Belt direction left to right Feed Servo feed Machine weight approx. 5150 kg Machine color RAL 1013 pearl white Color attachments RAL 7016 anthracite Control cabinet color RAL 7035 light grey

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump Fpodpfx Asrqwbiealeg - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: excellent (used), Year of construction: 2019, 5-Axis Machining Center POS POSMILL H 800 U Control: Heidenhain iTNC 530 Year of manufacture: 2019 ATTENTION: Machine has ONLY 500 spindle hours!!! Traverses: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm A +120° to -120°, C 360° Table load capacity: 1,200 kg Spindle interface: HSK-63A Tool magazine: 96 positions Spindle speed: 18,000 rpm Equipment Rotary-swivel table Rotating viewing window Glass scales on all axes Handheld control unit Heidenhain touch probe Laser tool breakage detection Rotary union in the table Air connection in the table incl. M-function Coolant system Internal cooling Chip conveyor Automatic roof Extraction unit Fedpfeyk Az Dsx Aaljpg Documentation General data Repeat accuracy/positioning accuracy on delivery: 0.004 mm/0.008 mm (VDI/DGQ 3441) Including tool holders with tools mounted in the tool changer (No suggestions), oil mist extraction IKZ Chip conveyor Rated power 90 kVA Full load current 125 A Max. current load 200 A 400 V 50 Hz

Condition: like new (used), Year of construction: 2010, Haas Multigrind CB multi axis CNC grinder, 12 station, Siemens Sinumerik 840D control, load / unload, LTA industrial air cleaning unit, (2010) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Fjdpfxev Igg Ij Aalepg Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: used, Year of construction: 2007, machine/vehicle number: 134418, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Equipment: type plate available, Technical Data Manufacturer: Zeiss Type: Accura 12/18/10 S/N: 13418 Year of manufacture: 2007 Measuring Plate Hard stone measuring plate Width: 2,400 mm Depth: 1,700 mm Height: 400 mm Measuring Range X-axis: 1,200 mm Y-axis: 1,800 mm Z-axis: 1,000 mm Accessories Control panel PC unit 2 x 27" monitors, brand BenQ Keyboard Mouse Fpsdoxnruaepfx Aalog Accessories Stored in a two-door metal cabinet Price: on request! Note: Our offer is aimed exclusively at professional customers. (Subject to change and error in technical data, details and prices as well as prior sale!)

Year of construction: 2001, condition: ready for operation (used), Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible. Fsdpjw Uk A Rofx Aalspg