Used Leather Punch for sale (4,249)

Condition: good (used), Year of construction: 1990, operating hours: 39,687 h, functionality: fully functional, Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 - 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Kdodjtraadopfx Ah Njg Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame Ksdjivql Sjpfx Ah Njdg -Manufacturer: Fibro stamping tool column frame -Type: 201.31.056. DIN 9822 C 100x80 -Die stamp: see photos -Dimensions: 340/160/H235 mm -Weight: 23 kg

Condition: used, CNC punching machine AMADA ARIES 245 with CNC control AMADAN 04PA Kjdpfex Rp Uxjx Ah Nedg Punching capacity: 20 t Machine weight: 7,500 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1991, Technical details: operating pressure: 160 bar distance between columns: 2000 mm throat: 1000 mm operating pressure: pneum. min/max 6/8 bar operating pressure: hydr. min/max 160/210 bar voltage: 380/50 V /Hz table surface area: 1900x1000 mm height over floor: 1000 mm tool clamping area: 1600x350 mm quantity of oil : 400 l total power requirement: 25,0 kW weight of the machine ca.: 7,1 t dimensions electric cabinet LxWxH: 1,0x0,3x1,4 m Kdedpfju Icxdox Ah Nog dimension machine xH: ca. L:2,2xB:3,4xH:2,2 m CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upper and lower tool) On the table are mounted the material intake and the sliding unit for the cut and hole punching. equipment: - light curtain - hydraulic pack - electric cabinet - control panel - workpiece counter - manual- and automatic operation possible - emergency stop On sale as is. i.D. *

Condition: used, Year of construction: 1994, Technical details: air pressure - required: 8 bar total power requirement: 14 kW machine weight ab.: 80-170/je Maschine kg MULTIFUNCTION PUNCH PRESS for alloy windows construction 3 pieces: - for Schüco alloy window frame, post and beam profiles S65 - for Schüco alloy wing profiles for alloy window system ROYAL S 55, S 65 and S 70 - for Schüco alloy door profiles Royal S65 door base profiles - foot operation - pneumatic air gun Kjdpfju Icyhjx Ah Njdg AND - drilling automat for window construction application: - drill automat for door hinge - drill taper: for 8 pcs, usable tools 6 pcs, countersink drills with dia. 11/15mm approx. 80mm long - clamping operation via foot control and drilling via manual - accessories: diverse installation parts i.D. *

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min Kjdeu Icxqjpfx Ah Nedg T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: used, Year of construction: 1974, Technical details: pressure: 30 t ram surface area: 450x250 mm ram adjustment: max. 50 (manual) mm strokes per minute: 20 - 120 stroke: ca./approx. 20 mm mm adjustment of stroke: nein/ no stroke adj. mm dayligth: Arbeitsraum: 220 - 280 mm Table surface area useable: 600 x 600 mm total power requirement: 7,5 kW weight of the machine ca.: 5,0 t dimensions L x W x H: Maschine: 1,8 x 1,2 x 2,7 m Dimensions (LxWxH): Schaltschrank: 0,92 x 0,46 x 1,4 m Automatic punching press 4 columns mechanical with feed unit with control panel passage widths: Column opening front=350mm and side=258mm * Kdjdpfx Ahju Icx Ro Nog

Condition: used, Technical details: punching cross section in mm²: 45 kp/mm² table-size: 120x100 mm throat: 80 mm weight of the machine ca.: 15 kg space requirements of the machine approx.: 0,3x0,2x0,95 m Punching Press Kdodpfxju Icw Ho Ah Nog *

Condition: good (used), Year of construction: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Type: KLH 500 / 610 Year of manufacture: 1995 - Punching force: 50 tons - Stroke: 60 mm - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm Kdedpfx Aewxy Dgjh Neg - with support table

Condition: good (used), Year of construction: 1998, punching force: 70 t, overall weight: 2,400 kg, total length: 2,100 mm, total width: 1,300 mm, total height: 1,900 mm, Profile shear with punching and notching station, shear capacity 70 tons = 450x15 mm, punching capacity 130 tons = Ø 28x20 mm, punching throat 500 mm, punching table 1150x530 mm with gauges, shear gauge with trigger pulse, 2 foot pedals, much tools; dimension 1300x2100x1800 mm, weight ca. 2400 kgs Kedemig D Djpfx Ah Nodg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, total height: 1,350 mm, installation height: 130 mm, total length: 800 mm, total width: 950 mm, overall weight: 560 kg, power: 0.8 kW (1.09 HP), Swingbeam die-cutting machine, hydraulic, capacity 16 to, stroke 90 mm, throat 560 mm, table size 800x400 mm, motor 0,8 KW, dimension die 460x350 mm, dimension 800x900x1350 mm, weight ca. 550 kg Kedpfju R Nx Njx Ah Nodg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 576892, Offer 25455 Hydraulic Flat Profile and Bar Steel Shear with Notching Device and Punching Station Ksdpfx Ahex S Ib Hs Nsdg Technical Specifications: - Flat Bar Shear: cuts up to 300 x 15 mm - Profile Steel Shear: cuts L-profile steel at 90° up to 120 x 12 mm - Bar Steel Shear: - cuts round steel up to 40 mm - cuts square steel up to 35 mm - Notching Device: with square notching unit 100 x 42 x 10 mm - Punching Station: - punching force: 600 kN - with stop table - throat depth: 220 mm - punches in steel up to 28 mm Ø in 15 mm or 38 mm Ø in 11 mm - various punch and die sets included - Drive: 400 V / 4 kW - Space requirements: approx. W 600 x H 1550 x D 1500 mm - Weight: approx. 1300 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, Topcoat line for leather, working width 1800 mm, with infrared dryer, air scrubber and chiller. Kodpfx Ahex S Er Ne Nsdg

Condition: good (used), Year of construction: 2005, machine/vehicle number: 4222559205002, Offer 25437 Technical Data: - Pressing force: 500 kN - Stroke infinitely adjustable: 10 - 32 mm - Strokes per minute: 22 - 27 1/min - Throat depth: 510 mm - Installation height: 350 mm - Drive: 400 V / 4 kW - Punching, for example: up to 27 mm Ø in steel: 14 mm - With special punching saddle, e.g.: up to 39 mm Ø in steel: 9.5 mm - e.g. up to 90 mm Ø in steel: 4 mm - Dimensions (approx.): W 700 x H 1700 x D 1200 mm - Weight (approx.): 1150 kg - Equipped with: - Hydraulic low-pressure centre punch locator - Extended punch holder for punching in section steel - Roller conveyor with gripper feed, control PEHU 101 - Roller conveyor approx. 6000 mm Kodjx S Ehwopfx Ah Njdg - Foot switch - Emergency stop button

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering this used schoen + sandt 5300 A bridge die cutting machine, year of manufacture 2016 Kdjdpfx Ahox S Ed Se Njg Machine type: 5300 A Cutting table: 1700 x 1050 mm / 1000 KN If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 7555605, Max size: 60 x 41 cm, integrated feeder SE - 18.2, cross-web paper cutter ST - 18.2, die cutting unit D - 18, strapping/banding unit PB - 18.1, horizontal and vertical strapping. Paper width min. 35 x 45 mm, paper width max. 405 x 600 mm. Stacking height min. 30 mm, stacking height max. 100 mm. Machine no.: 7555605 Kodpexc Uv Aofx Ah Njdg

Condition: excellent (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 32250, Size 64 x 90 cm, for diecutting only, excellent condition Machine no.: SBDS32250 Kodsw Inz Dopfx Ah Nodg

Condition: good (used), functionality: fully functional, Due to cessation of operations at the Norderstedt site, for sale as-is, not loaded. Kugler Paternoster punching machine, suitable for Wire-O and index tabs Format 50 x 50 cm Includes 2 punching tools Kdjdpfxjrn R Rfj Ah Nsg Final price reduction!!!

Condition: used, machine/vehicle number: 4131, Comm. no. Lg 34422 Kedeinzdljpfx Ah Nodg High performance automatic punching machine BRUDERER BSTA 60 H from current production. Stroke adjustment has to be repaired. Without soundproof cabin and without conveyor system. Feed BBV 202/120

Condition: used, Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Arbeitsbreite / Working width 550mm Stanzwerkzeug 4x4 3:1 Daumenloch für KUGLER-WOMAKO ProPunch 50-110 Daumenloch Druchmesser 20mm Kjdpfx Ahsx Rdc Rs Nsdg Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Thumb Cut 20mm  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 1979, Two Bihler GRM-50 are available, year of manufacture: 1979/1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg. Kjdetvar Iopfx Ah Nodg

Condition: used, Trolley Beam Punching Machine / Trolley Beam Punch Sandt Type 530 - Used Machine Punching force: 30 tons Table size: 1600x500 mm Trolley size: 500x500 mm Kdjdpfx Aex Sdzpeh Nog Used, overhauled machine

Condition: used, Sandt 530 machine available with 80 T or 100 T Punching force: 800 kN Table size: 1600 x 800 mm Punching stroke: 20 – 165 mm, infinitely adjustable Working height: without punching pad approx. 1000 mm Kodpfxsx Sdy Ej Ah Nsdg Overhauled or Punching force: 1000 kN Table size: 1700 x 1050 mm Punching stroke: 20 – 165 mm, infinitely adjustable Working height: without punching pad approx. 1000 mm Overhauled

Condition: excellent (used), Year of construction: 2010, Boschert TRI 1500 CNC Z Rota Revo TRUMPF quick-change tool system Punching force: 3x 280 kN (28 tons) Station 1: Trumpf system tool - Size 3 (105 mm) with spray device Station 2: Trumpf system tool - Size 3 (105 mm), free-rotating/indexable Station 3: Trumpf system tool/Boschert Revotool - Size 3 (105 mm), incl. Revotool 8-station tool holder Kdjdpsid I D Asfx Ah Njg Travel distances: X-axis 3,000 mm (extension up to 9,999 mm) Y-axis 1,580 mm Throat depth: 1,730 mm Tool system: Trumpf size 1-3 (105 mm) Labod 32060 graphic control / workshop-programmable Max. sheet thickness: 6 mm (clamping opening) Max. stroke height: 90 mm, infinitely programmable up and down Slug extraction system Ball rollers in the machine table Table width left + right: 3,200 mm each Table depth: 2,810 mm Table height: 900 mm Overall width: 6,482 mm Overall depth: 4,600 mm Overall height: 2,110 mm Drive power: 25 kVA Machine weight: 15,800 kg Hydraulic oil capacity: 160 l Color: Blue RAL 5017 / Light Grey RAL 7035 Year of manufacture: 2010 Very well-maintained condition – overhauled Comes with extensive accessories

Condition: excellent (used), Sprossen punching machine 12 mm Kodpfow Hlztox Ah Nsdg Used, in top condition Manufacturer: Schleicher Sprossen knife 12 mm Right extension table with stop slider Required space approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free, unpacked Handover in as-inspected condition, without guarantee or warranty