Used Label Die Cutting Machine for sale (68,842)

Condition: good (used), Year of construction: 2016, functionality: fully functional, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2016 Controller: IMSNC Cutting table: 3000 x 1500 mm Extraction channel left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 – 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process management with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition, and the power source • Display of operating statuses and error messages via LED and display • Analog and serial interface for adaptation to CNC controls • Infinitely variable adjustment of cutting current from 10–160 A; marking current from 5–25 A • Optimal piercing due to stepless delay time for main arc and adjustable current rise Fgsdpfxeyzy S As Acwea • Adjustable current reduction at corners, as well as at start and end signals from guidance systems • Automatic display of preset cutting current • Serial data transfer for PC-based diagnostics Plasma Cutting Technology Contour Cut • Further development of HiFocus technology for carbon steel • Optimized for cutting fine internal and external contours • High cut quality and contour precision • Holes with angle tolerances according to DIN EN ISO 9013 within range 2-4 • Low angle deviation and smooth cut surfaces • Very good repeatability and dimensional accuracy • No time-consuming post-processing—high productivity, reduced costs • No additional equipment or software required, and no new wear parts necessary • Supplied as standard Plasma Torch PerCut 200/210 • PerCut 200 machine plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded connector for fast and comfortable setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf for less emission and waste • Significantly lower gas consumption compared to the competition through efficient liquid cooling up to the nozzle tip • Lower noise level due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Technical Data: Power source: HiFocus 161i Connection voltage: 400 V; 3-phase; 50 Hz Max. power consumption: 28 kVA (100% duty cycle) Line fuse: 50 A (slow-blow) Protection class: IP 22 Open circuit voltage: 330 V Cutting current: 10–160 A (100% duty cycle) Marking current: 5–25 A (100% duty cycle) Cutting range: max. 50 mm, recommended 0.5–38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma Machine Torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Condition: excellent (used), Year of construction: 2014, • Substrate width : max 430mm • 8 Flexo Printing Unit • (Fully servo driven: double servo motors on print cylinder and impression roller) • 8 UV dryer • Temperature Control • Driven Chilled Drums • Chilling unit • Front load unwinder with motorized roll lifting • Unwinder with magnetic particle clutch (max. reel diameter 1.000 mm.) • Automatic Web Guide • Video inspection with manual camera movement • Servo Infeed group • 2 Die-cutting stations (male-female die-cutting possible) - servo • 1 Gap Master • Waste matrix rewinder diameter : Snowball 605mm • Servo Outfeed • Organizer (includes crane to remove and store die-cutting tools) • 3 Web break detectors • 3 antistatic bars • Motorized rewinder (max. reel diameter 1.000 mm.) • Local touch screen panel on each printing and die-cutting station • Main touch screen panel (PC MHI) • Direct Internet Connection for remote SW and HW service and upgrades • Automatic pre-register, register and tension control • Vario™ - Servo driven infeed and outfeed (includes 2 active load cells) • GIDUE mark-to-cylinder ARC register control • Servo driven die-cutting units (1 servo motor per unit) Fgsdpev Tzhqsfx Acwea • Second pass register control • Print Tutor™ An "intelligent" camera automatically detects print register and pressure marks and performs completely automatic register adjustment, during the set-up and during production. It includes additional servo motor for lateral register adjustment (lenght register adjustment is built in servo driving motor of the print cylinder. • Delame/Relam 2K • Turn bar • Lamination and cold foil • Corona treater • Web Cleaner •

Condition: used, functionality: fully functional, 1. BALL RECIRCULATING UNIT KUVE20-B-1947 PART NO.: 386954 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: FR 2. WATER MANIFOLD COMPLETE PART NO.: 1996899 1 SET Machine: T3030 L20 3. WELDING HEAD WS OPTICS 1 SET Machine: T3030 L20 4. CUTTING HEAD LENS 250 D40 – 17616 PART NO.: 1497234 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: DE 5. (R)GRID VOLTAGE UNIT PART NO.: 0983675 1 PC. Machine: T3030 L20 Fodjx Uzblepfx Acwsga 6. BELLOWS Y-AXIS 93614-102-40 PART NO.: 0141394 1 PC. Machine: T3030 L20 7. EXPANSION VALVE TGEN 25TR MOP70 R134a PART NO.: 1627195 1 PC. Machine: 3030 6kW 8. BELLOWS X-AXIS 1854032 PART NO.: 606083 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: IT 9. TRIODE UP TO 4KW RS3021CJ PART NO.: 903994 1 PC. Machine: T3030 BRAND: THALES 10. FILTERS 8 PCS. Machine: T3030 11. BELLOWS Y-AXIS PART NO.: 1226193 1 PC. Machine: T3030 5kW 12. DISK BELLOWS Y-AXIS PART NO.: 1353514 1 PC. Machine: T3030 5kW 13. BOX BELLOWS PART NO.: 0978079 1 PC. Machine: T3030 5kW

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 6911122, cutting width (max.): 920 mm, Equipment: documentation/manual, safety light barrier, 1 piece Polar Mohr cutting machine Fgodsyzyizepfx Acwja Year of manufacture: 1999 Machine no.: 6911122 Machine is dismantled, packed, and in stock at our warehouse. Location: Austria Accessories: Light barriers Standard side tables left and right Chrome air table Tools and documentation

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld Fedpfxov Sm Rue Acwsga • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Year of construction: 2013, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM Fgodpfx Aovhc S Hjcwsa X-AXIS TRAVEL: 3270 mm Y-AXIS TRAVEL: 1550 mm Z-AXIS TRAVEL: 100 mm WORKING AREA: 3070 x 1550 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: AJ2000 Fiber ; 2000 W CONTROL UNIT: AMADA AMNC3i WEIGHT: 11200 Kg OVERALL DIMENSIONS: 10028 x 2900 x 2000 mm NOTE: WITH LOADING/UNLOADING SYSTEM LKI 3015FLC-AJ YOM 2013; AUTOMATIC NOZZLE CHANGE

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, POLAR 115 E PAPER CUTTER complete with side tables, machine fully refurbished Fjdpjyzxkkofx Acwega

Condition: good (used), Trumpf Trumatic WS 2500 was used for Water jet. We upgraded new control unit for CNC table and HD pump. Control unit was fully functional (and was previously used by our client). On photographs you can find all parts: control unit cabinet, AC servo motors and screen holder. Fodstghf Uepfx Acwsga If you have older model CNC table (ex. computer with DOS operating system) and water jet HD pump (with touchscreen monitor- which is our product) we can place new control unit on your demand.

Condition: used, Year of construction: 1987, functionality: fully functional, ZINSER Flame Cutting System – CNC 500 – Table 3,000 × 8,000 mm Industrial version | CNC controlled | Immediately available Short description: For sale is a robust Zinser flame cutting system with Zinser CNC 500 control and a large cutting table measuring 3 × 8 m. The machine dates from the 1980s and was operating perfectly up to its professional dismantling. The machine is currently dismantled; therefore, a test run is not possible. Inspection of the system and all components is, of course, possible by appointment. Technical data: - Manufacturer: Zinser - Machine type: Not specified - Year of manufacture: 1980s Fgsdpfx Asyanbbscwea - Control unit: Zinser CNC 500 - Cutting process: Oxy-fuel / flame cutting - Cutting table: approx. 3,000 × 8,000 mm - Condition: used, dismantled Condition & Classification: - System was in operation and fully functional up to dismantling - Dismantled in an orderly and professional manner - Heavy-duty industrial design - Mechanics, table, and gantry in solid condition - Due to age, not a modern high-speed CNC, but: x very robust x straightforward technology x ideal for refurbishment, modernization, or continued use Scope of delivery: - Cutting table 3 × 8 m - Gantry / carriage - CNC control Zinser CNC 500 - Existing flame cutting components - Sale as inspected Inspection & Collection: - Inspection possible by appointment - No test run possible as the system is dismantled - Loading and transport to be arranged by buyer - Location: Germany

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 25 h, control type: CNC control, controller manufacturer: Bodor, controller model: Bodor Thinker 3.0, laser type: fiber laser, laser source manufacturer: Bodor, laser source model: BodorPower Laserquelle 3 kW, laser hours: 10 h, laser power: 3,000 W, sheet thickness (max.): 18 mm, sheet thickness steel (max.): 18 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 5 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 911 kg, overall weight: 2,820 kg, total length: 5,600 mm, total width: 2,260 mm, total height: 1,960 mm, warranty duration: 24 months, Equipment: CE marking, documentation/manual, fume extraction, Bodor A3 – Fiber Laser Cutting System for Sheet Metal Processing The Bodor A3 is a compact and economical fiber laser cutting system designed for precise sheet metal processing. This machine stands out for its high dynamics, intelligent features, and especially user-friendly operation – making it ideal for job shops, metal fabricators, and industrial series production. Bodor's A-Series has been specifically developed for efficient production processes, combining cutting-edge laser technology with high reliability and low operating costs. Bodor A3 Highlights Fgjdpfxjyzwpxj Acwsa • Working area: 3048 x 1524 mm • High dynamics with up to 1.5G acceleration • Maximum traverse speed up to 100 m/min • Precise positioning ±0.05 mm • Automatic focus adjustment • Intelligent remnant sheet nesting function • Anti-vibration technology for thin sheets • Fully enclosed machine for maximum safety • Simple operation and rapid commissioning The Bodor A3 is equipped with powerful servo drives, enabling high dynamics and improved productivity in daily operation. Intelligent software supports automatic parameter selection, optimized nesting, and reduced setup times. High efficiency with low operating costs Thanks to state-of-the-art fiber laser technology, the Bodor A3 offers: • Low maintenance costs • Low energy consumption • High cut quality • Fast throughput times The intelligent anti-vibration function ensures stable cutting results, particularly with thin sheets, increasing process reliability. Typical Applications • Contract manufacturing • Metal fabrication • Mechanical engineering • Sheet metal processing • Series production • Prototyping Available Laser Powers • 1.5 kW • 3 kW • 6 kW (depending on configuration and customer requirements) Suitable Materials • Steel • Stainless steel • Aluminum • Brass • Copper • Other metals The Bodor A3 is the ideal entry-level solution for professional fiber laser technology, offering an excellent price-performance ratio while ensuring high productivity and quality.

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW Fedpfex Sylqox Acwega - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2015, TYPE: L13 / S0540C0311 Fedpfjxd Uawsx Acwoga Year of manufacture: 2015 Laser on: 33,112 h Beam on: 8,166 h Power: 5,000 W X-axis travel: 4,000 mm Y-axis travel: 2,000 mm Z-axis travel: 750 mm B-axis travel: ±135° C-axis travel: n*360° Display: TFT 12" Interface: SINUMERIK 840D

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Fgjdpfsyyygkox Acwsa Power: 3,200 W

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Beam on: 17,540 h Laser on: 45,508 h Fjdoyyyiljpfx Acwega

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 240 h, control type: CNC control, controller manufacturer: Hypertherm, controller model: Edge Connect TC, sheet thickness steel (max.): 40 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 5,000 kg, warranty duration: 12 months, Used Esprit Automation CNC Plasma – High Definition XPR170 This Esprit Automation CNC plasma cutting system is presented in exceptional, near-new condition with less than 300 operating hours. Built for precision and reliability, this machine is equipped with a Hypertherm XPR170 high-definition plasma system, delivering superior cut quality and performance across a wide range of materials. Key Specifications: Cutting Area: 3000 x 1500 mm Fgedpfx Asyzuw Tscwea Plasma Source: Hypertherm XPR170 (High Definition) Gas System: VWI Gas Module Included Piercing Capacity: Up to 40 mm Mild Steel Operating Hours: < 300 hours Condition: The machine is in pristine condition, having seen minimal use in a controlled environment. Fully maintained and ready for immediate operation. Additional Information: 12-month parts warranty included Ideal for high-precision fabrication, engineering, and production environments Excellent opportunity to acquire a premium CNC plasma system at a fraction of new cost

Condition: used, Year of construction: 2021, functionality: fully functional, We offer this used Kongsberg X44 cutting machine, year of manufacture 2021. Fgsdpfx Acsyzrylswea

Condition: ready for operation (used), functionality: fully functional, operating hours: 9,000 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, controller model: 840D, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, pipe diameter (max.): 170 mm, pipe length (max.): 6,500 mm, power: 2 kW (2.72 HP), Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, Maximum round tube diameter to be machined: 170 mm Maximum square profile to be machined: 120 x 120 mm Maximum rectangular tube to be machined: 150 x 100 mm Minimum tube diameter to be machined (automatic): 20 mm Minimum tube diameter to be machined (manual): 12 mm Shortest tube length to be machined: 185 mm Minimum wall thickness to be machined: 0.8 mm Maximum wall thickness to be machined (2 kW laser, mild steel): 8 mm Maximum wall thickness to be machined (2 kW laser, stainless steel): 4 mm Maximum wall thickness to be machined (2 kW laser, AlMg3): 6 mm Repeatability: ± 0.05 mm Maximum profile length: 6500 mm Minimum profile length for automatic loading: 3000 mm Discharge length (standard): 4000 mm Maximum profile weight: 37.5 kg/m Maximum loading capacity: 3000 kg Possible profiles for loading: round, square, rectangular, elliptical Dimensions (L/W/H): approx. 16,000 x 7,400 x 2,364 mm Weight: approx. 20,000 kg Standard equipment: • Control: Siemens Sinumerik 840 D Fgjdpfx Aeyk Slxecwea • Precitec autofocus Procutter cutting head F 150 (Focus) • Control cabinet air conditioning • Manual loading • Manual unloading • Laser positioning diode • Centralized lubrication unit • Disposal box for small parts • Illuminated cutting area • CE certification Additional features: • IPG laser source 2 kW • Vanterm compact filter system • Automatic loading system (6500 mm) • Unloading unit (6000 mm) • Discharge conveyor, incl. small parts conveyor (to the rear) • Automatic weld seam detection • Automatic real-time measurement system for centering chuck • Calcium carbonate dosing unit Please contact us for further information on this machine.

Condition: ready for operation (used), Year of construction: 1995, Thread Rolling Machine Flat Die TLM RP8 Operational, fully functional Available for any tests c/o H.B.R. srl Ready for immediate delivery. TLM RP8 Informazioni tecniche: Year: 1995 Diameter range: 3 – 8 mm. Shaft length under head: 90 mm. Max. thread length: 52 mm. Dies size:130/115x54 mm. Speed: 420 pcs./min. Vibratory feeder Condition: very good, operational Ready for immediate delivery Fjdpfx Ajyzqzbjcwega Machinery runs without any problems. Available c/o H.B.R. srl - Italia

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, POLAR 92 X PLUS paper cutter – year 2011, side tables 75x75 Fsdpfx Acoyzpyiowoga

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, stack height: 200 mm, paper weight (min.): 36 g/m², paper weight (max.): 160 g/m², product width (max.): 520 mm, roll diameter: 1,370 mm, TECHNICAL DETAILS Fsdpfxjyzpw Ue Acwoga Unwinder: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Maximum roll diameter: 1,370 mm Maximum roll weight: 800 kg Slitter: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Paper thickness: 36 g/m² to 160 g/m² Cutting accuracy: +/- 0.2 mm Continuously variable format setting: 4" - 25" Continuously adjustable cutting width: 5 mm to 80 mm Stack counter/stacker: Minimum stack length: 100 mm Maximum stack length: 635 mm Minimum stack width: 115 mm Maximum stack width: 720 mm Minimum stack height: 100 sheets Maximum stack height: 200 mm Maximum production speed: 250 m/min (depending on paper thickness) Paper thickness: 36 g/m² to 160 g/m² MACHINE DETAILS Unwinder: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Slitter: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Stack counter/stacker: Power supply: 35 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Folding station: Power supply: 50 A; 400 V, N, PE EQUIPMENT Electrical documentation Full flexibility for cutting and residual formats Format and length changes via operator panel Longitudinal cuts with knife holder possible Waste extraction possible (extractor not included in the system) Can stack up to two sheets simultaneously

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMPACT, The COMPACT model plasma cutting machine is a machine model that protects your budget through lower investment and reduced costs, prioritizing reliability, user-friendliness, and compactness as its three main principles. The Compact is a valid solution for the needs of a wide market segment, offering an excellent cost/benefit ratio for anyone dedicated to sheet metal processing. COMPACT is characterized by a monoblock design with a compact layout, making it easy to transport and suitable for medium and small workshops. This system is ideal for high-capacity plasma power sources. The system comes equipped with an extraction filter and plasma power source, and it can be configured with various CNC and software options depending on customer requirements. The Compact can feature a working range between 1,500mm x 3,000mm and 2,000mm x 6,000mm. Fjdpfxoyzm S As Acwsga

Condition: used, Year of construction: 2013, laser capacity in Watt 3500 travel -x axis 3070 mm Fsdpov Nq Rgsfx Acwsga travel -y axis 1550 mm Control AMNC-F table load capacity 920 KG material length max. 3050 mm material width max. 1525 mm total power requirement 30 kW weight of the machine ca. 8,2 t dimensions of the machine ca. 10,00 x 2,90 x 2,20 m

Condition: used, Year of construction: 2002, max. wheel diameter 275 mm max. module 6 min. module 1,5 Control SINUMERIK 840 C tooth width 5,5 mm Fgodpfxovxwnws Acwea spiral angle min. 0 / max. 60 ° max. number of teeth 120 min. number of teeth 5 ratio of transmission 1:10 min. ratio of transmission 1:1 work piece spindle speed max. 110 U/min blade head turning speeds 20 - 110 U/min total power requirement 100 kW weight of the machine ca. 16,7 t dimensions of the machine ca. 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device

Condition: good (used), functionality: fully functional, Year of construction: 2009, Working area: 3000 x 1500 mm Laser power: 5000 W Sheet thickness for mild steel: 25 mm Sheet thickness for stainless steel: 20 mm Sheet thickness for aluminium: 12 mm Machine weight approx.: 12,000 kg Operating hours: Fedpfx Acsyyn Rqjwega NC ON hours: 38,900 h Laser ON hours: 39,498 h Beam ON hours: 18,649 h (Status as of: 22/01/2026)

Condition: new, Year of construction: 2025, Laser power: 6000 Watt Round tube: 20 - 350 mm Square tube: 20 x 20 - 350 x 350 mm Rectangular tube: 20 x20 - 350 x 350 mm Max. positioning accuracy X,Y axis: 0,05/1000 mm Max. positioning accuracy U axis: 0,05/1000 mm Max. steel: 14 mm Max. stainless steel: 10 mm Fgsdpfoxgc Arex Acwea Max. aluminium: 10 mm max. tube weight: 1200 kg Length: 17296 mm Width: 4271 mm Height: 2933 mm