Used Label Die Cutting Machine for sale (69,445)

Condition: good (used), Manual die-cutting with hot foil system. Dcjdpfxjzyc D Ao Albjl Maximum size: 720 x 1040 mm. Hot foil system with 3 zones. Heating frame needs to be replaced. In production. Available immediately.

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) - Working height: 1,300 mm - Weight: approx. 1,800 kg Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Dcodpfx Alozk U E Tobel Condition Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request.

Condition: used, Year of construction: 2007, Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Dcjdpfjwhkhhsx Albel Technical data  - Capacity: 18,000 bottles per hour - Label positions: Full bottle sleeve or partial bottom sleeve - Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  - CLEVER Machines GS 4001 sleeving unit - Shrink tunnel CLEVER Machines STJ 3

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Dodpfx Alszycrasbocl

Condition: used, In this offer you purchase a used cutting system "Fotoba FHS42 PW" Object of sale: 1 x Fotoba FHS42 PW suitable for: HP Pagewide Pro XL 10000 HP Pagewide XL 8000 Dcsdjqmm D Sopfx Albjl Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: good (used), Logopak 920 IIP labeller Serial: 2040294 2004, Print and apply labelling system, high speed pallet labelling, with label and ribbon rolls of up to 1200m, up to 240 pallets per hour, touch screen controls, with manual, 3Ph Dcedpju U I A Eefx Albol

Condition: used, Year of construction: 2012, machine/vehicle number: ET192, Used Hot Melt Labeling Machine Kosme 20000 bphTechnical Specifications & Performance DataThis Kosme TOP 2 HM 16 720 is a high-speed hot melt labeler engineered for reliable performance in beverage production and industrial packaging. Optimized for PET containers, it supports demanding operations on a used bottling line while maintaining label accuracy at elevated speeds.Manufacturer: KosmeModel: TOP 2 HM 16 720Year: 2012Formats: Round PET bottle, 74mm diameter. ( can work both round and square bottle).Application: Hot melt labeling for PET containersProduction speed: up to 20,000 bottles per hour (format-dependent)Labeling stations: 1Number of plates: 16Head adjustment: availableOptical centering system: includedContainer types: PET (primary configuration)Dimensions: W 1900 mm × L 3000 mm × H 2300 mmWeight: 2500 kgElectrical: 400 V, 50 Hz, 9 kWCondition: in storage (second hand machine)Documentation: manuals availableAdvanced Automation & Control SystemsDesigned for consistent, repeatable operation, this Kosme labeler features precise hot melt application for cylindrical PET bottles and adjustable settings to support changeovers across standard beverage formats. The machine incorporates standard safety features and a centralized control interface for monitoring key parameters during labeling.Hot melt application system engineered for strong, clean adhesion at high speedOperator controls for format adjustments and production monitoringElectrical supply: 400 V, 50 Hz, 9 kW connected loadIntegrated safety protections to safeguard operators and uptimeProduction Line Integration CapabilitiesThis unit integrates smoothly into a complete used bottling line with upstream rinsing and filling systems and downstream capping, inspection, and packaging equipment. Standard connections and communication signals facilitate synchronization with conveyors, accumulation tables, and quality control devices.Compatible with common beverage line components: rinsing, filling, capping, conveying, and inspectionFormat change support via head adjustment and plate configurationSuitable for multi-SKU operations within PET bottle familiesCan operate in beverage production environments for water, juice, beer, wine, and moreMachine Condition & Maintenance HistoryThe machine is currently in storage and offered as second hand equipment. It presents a solid platform for rapid deployment when a dependable labeling solution is needed. Manuals are included to support commissioning, operation, and preventive maintenance routines. Physical inspection and test runs can be organized as part of the purchasing process for verification.Operational Performance & VersatilityWit... Djdpfx Alevguc Iobjcl

Condition: used, Year of construction: 2010, functionality: fully functional, Technical specifications: System output: up to approx. 2,000 cuts per 8 hours, depending on the cross-sections of the reinforcing bars used Feed magazine: 12 positions, automatically timed Discharge magazine: 12 positions, automatically timed Bar length, maximum: 6,000 mm Bar length, minimum: 400 mm Dodpfxozm I Dhs Albocl Cutting length, maximum: 4,000 mm Cutting length, minimum: 170 mm Remaining piece processing: 350 mm Profile dimensions: 86 × 70 mm Wall thickness, maximum: 3 mm Functionality and features: • Saw unit with spray medium system • Automatic operation • Lateral discharge in the Z-direction • Screen-based dialog system with loading table display • Direction of travel, depending on the model, from left to right or from right to left Control and hardware configuration: • High-quality PC with a 19-inch TFT color monitor • USB ports • DVD drive • Keyboard • Windows operating system • Remote maintenance via the internet

Condition: used, Year of construction: 1993, POLAR 115 EM-MON AUTOTRIM • Airtable • Side tables (air-cushioned) • Light barrier Dcodpfxsytb A Sj Albjl • Programmable • Three extra spare blades • In production • Available: 05/2026

Condition: like new (used), Year of construction: 2023, operating hours: 68 h, Struers Discotom-100 – 2023 – only 68 operating hours – Struers warranty For sale: Struers Discotom-100, a professional, automatic laboratory cutting machine designed for the precise preparation of samples for metallographic analysis. The unit is from 2023 and is in very good condition. The machine has been used very little – the counter shows only 68 total operating hours. Key features: * Manufacturer: Struers * Model: Discotom-100 * Year of manufacture: 2023 * Operating hours: only 68 * Condition: very good, practically unused * Warranty: 12 months Struers warranty * Automatic, programmable cutting * Control of feed and sample positioning * Movable X/Y work table * Large working chamber for cutting larger and irregular parts * Adjustable blade rotation speed * Cooling system during cutting * Enclosed working chamber cover with a large window * Clear control panel * Designed for the precise cutting of metals and other materials before further metallographic preparation The Discotom-100 is a high-quality device used in quality control laboratories, materials laboratories, R&D departments, and in the metallurgical, automotive, and manufacturing industries. A major advantage of the offered unit is its very low operating hours – only 68 – and the one-year Struers warranty, which makes it an attractive alternative to purchasing a new machine. Dedpfxszx Hq Ds Albjcl Delivery possible in January 2027.

Condition: like new (used), Year of construction: 2016, Manufacturer: LVD Model: Electra FL3015 Serial number: 36445 Country of origin: Belgium Year of manufacture: 2016 Technical parameters: Laser type: Fiber laser Source power: 3 kW Working area: 3000 mm × 1500 mm Laser source: Rofin FL030 fiber laser source Dcjdpfx Aloyhppvobjl Source serial number: 987 Source year: 2015 Additional equipment: Thermotec chiller – cooling unit for stabilizing the laser source temperature Donaldson Torit DCE DFPro-4SPK – extraction and filtration system for laser fumes Automatic loading/unloading table Light guard – light protection system

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 Dodpfxjqpdkce Albjcl - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 818745 / (PPS 2013- 001), This machine was updated in 2013 with a two-hand safety system. It is a semi-automatic machine that prints labels and presents them in a fixed position. The operator places the box in the fixture and presses the OK button with both hands for safety. Afterward, the label will be applied. Dsdpfszx D I Tsx Albjcl The unit consists of an Allen printer 53XL80 and a table-top version – Herma 414 from 2011. The table height can be adjusted by pressing a button. The control system is integrated into the HERMA 400 labeler. Machine capabilities: Labeling of cartons. Output: max. 30 pcs./min. Size – Cartons (55 x 30 mm and 95 x 120 mm). Label specifications: Label size: 70 x 20 mm, 100 x 70 mm, 100 x 45 mm, 140 x 25 mm. Label specifications: K: Core diameter 76 mm R: Reel diameter max. 300 mm B: Label width max. 160 mm L: Label length max. 800 mm Label winding outside.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® Dcsdpjzwl Dmofx Albjl - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: used, Year of construction: 2008, - with 6 plates - with 2 labeling stations (front- and back label) for self-adhesive labels Technical data: working direction: left-right, rotative, clockwise capacity bph max.: 6000 labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 6 bottle diamater max (mm): 100 Dodpezx Ddzofx Albocl bottle diamater min (mm): 60 bottle height max (mm): 370 bottle height min (mm): 180 motor height adjustment: yes speed adjusment: frequence converter

Condition: used, For self Adhesive  Labels and Wet Glue Format Parts for Bottle Size 0.375l , 0,75l , 2.0l Technical data: working direction: left-right, rotative, clockwise capacity bph max.: 10000 labels: self adhesive labels, cold glue paper labels number of labelling stations: 4 number of bottle plates: 10 Dcodpjzx Dbtjfx Albol bottle diamater max (mm): 120 bottle diamater min (mm): 50 bottle height max (mm): 350 bottle height min (mm): 160 motor height adjustment: yes speed adjusment: frequence converter

Condition: used, Year of construction: 2008, Program control Dcedpfezwkpujx Albel Air table in the center + side tables Light barriers Spare blades Cutting length: 780 mm Stack height: 120 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 21,158 h, machine/vehicle number: A0217E0103, control type: NC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 21,158 h, laser power: 2,000 W, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, The showcased laser cutting machine is in very good technical condition. It has been used exclusively in our production facility since new. The machine is currently in operation, so it can be demonstrated while running without any issues. It has been regularly serviced by qualified technicians and cleaned of current contaminants. The offered laser cutter is ready for immediate use and reports no errors or faults. Dcjdpfx Ajy Sgmnolbol

Condition: used, Year of construction: 2011, Automatic labeling machine for glass bottles Manufacturer/Model: Makro MAK-1 4P Ua2 L2 Version with 2 self-adhesive labeling units MAK-A50 Suitable for front label and back label Output: up to approx. 3,000–3,500 bottles/hour Container diameter: 40–130 mm, container height: 140–380 mm Label length: 10–195 mm, label height: 10–180 mm Stainless steel version AISI 304, safety enclosure in accordance with CE PLC control with touch-screen display Automatic speed regulation and electric head height adjustment Optical orientation via sensors, plate rotation via stepper motors Installed power: approx. 4 kW Dcjdezxu A Uopfx Albsl Technical data: working direction: left-right, clockwise capacity bph max.: 4500 labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 4 orientation: bottle plate with stepper motor, optical orientation using a photocell bottle diamater max (mm): 130 bottle diamater min (mm): 40 bottle height max (mm): 380 bottle height min (mm): 140 motor height adjustment: yes speed adjusment: frequence converter

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Hello, we are offering our 2017 Rabolini die-cutting machine/die-cutting system, which has been completely overhauled. The maximum die-cutting format is 100 cm x 140 cm, with a cutting force of 360 tons. Die-cutting principle: flat/flat. Weight of the machine: 8,100 kg. The die-cutting machine is located on the ground floor, on a well-accessible industrial concrete floor. Documentation, CE declaration, etc., are all available! The machine can be inspected and tested while in operation. We would be happy to assist with training and instruction on how to operate the machine. The machine is located in D-41751 Viersen and is available for inspection. Dcjdpfxezxufvj Albsl If you have any questions about the machine, please do not hesitate to contact us.

Condition: good (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: C 99 03 05, control type: NC control, degree of automation: manual, actuation type: electric, sheet thickness (max.): 6 mm, table height: 860 mm, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 6,150 kg, total length: 6,000 mm, total width: 4,800 mm, total height: 1,800 mm, number of support arms: 2, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, foot remote control, type plate available, For sale is an AMADA GS630 plate shear with additional equipment for efficient and gentle material and part transport. The system is equipped with a lifting table and a conveyor belt, enabling comfortable further transport of the cut components. An integrated scrap collection box ensures the separate collection and removal of the remaining scrap strips. The combination of a high-performance plate shear and automated part handling enables an efficient and material-friendly cutting process while reducing manual handling. Equipment: AMADA GS630 plate shear Robust and reliable AMADA machine technology Lifting table for receiving and transferring the cut components Conveyor belt for automated part transport Scrap collection box for separate collection of scrap strips Gentle removal of finished components Reduced manual effort in part handling Suitable for efficient industrial sheet metal processing The combination of lifting table, conveyor belt, and scrap collection box is particularly practical, as cut components can be transported in a controlled manner, and scrap strips are collected separately. This optimizes the material flow and reduces the risk of damage to the manufactured components. Technical data: Manufacturer: AMADA Type: GS630 Machine type: Plate shear Year of manufacture: 1999 Max. sheet metal thickness: 6 mm Lifting table: available Conveyor belt: available Dcsdpfxezxqbae Albsl Scrap collection box: available Condition: used, good Location: 54576 Hillesheim Inspection and test run possible by arrangement. A video of the machine during production can also be provided. Price and further technical information are available upon request.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 77249, input voltage: 220 V, cutting length (max.): 2,500 mm, cutting width (max.): 1,250 mm, input current: 1 A, ESAB-HANCOCK oxy-fuel cutting machine UXB 12.5 – manufactured in 1994 – fully functional For sale is an oxy-fuel cutting machine from the manufacturer ESAB-HANCOCK GmbH, type UXB 12.5. The machine is in fully functional and operational condition. It was rarely used in our company and therefore has relatively low usage. Technical data: Manufacturer: ESAB-HANCOCK GmbH Type: UXB 12.5 Machine no.: 77249 Year of manufacture: 1994 Connection voltage: 220 V Frequency: 50 Hz Condition: used, fully functional Inspection & collection: The oxy-fuel cutting machine can be inspected on-site and tested for functionality after prior appointment. The sale is exclusively for self-collection. Dismantling, loading, and transport must be arranged beforehand. Dodpozxqa Aefx Albecl We will gladly provide further technical information, dimensions, or additional images if there is serious interest.

Condition: excellent (used), functionality: fully functional, working width 3100 mm Dcodjzxp U Sjpfx Albol working height 55 mm main motor power 4 kW cast iron frame safety light barriers power supply 380V

Condition: excellent (used), functionality: fully functional, Motor power 5.5 kW Cutting length 3000 mm Maximum height 60 mm Dcjdpfxszxp S De Albjl Hydraulic knife movement Hydraulic clamping Photocell protection

Condition: used, Year of construction: 2024, machine/vehicle number: SN071674, functionality: fully functional, 12 months warranty, excluding the engine. Dodpfjzxp Ekjx Albjcl