Used Krauss Maffei Km 150 520 C1 for sale (197)

Condition: excellent (used), Year of construction: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, bore: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight (max. mould open width): 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Ledpjw U Rcdjfx Ab Ushn Pump motor power: 45 kW Heater capacity: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke per Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s Lsdpfxew U N Ixo Ab Ujhn - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: good (used), Year of construction: 2008, operating hours: 25,000 h, Very well-maintained Krauss Maffei injection molding machine with low operating hours. Model: KM 110/380 CX Year of manufacture: 2008 Clamping force: 1,100 kN Screw diameter: 35 mm Max. shot weight (PS): 140 g Max. stroke volume: 154 cm³ Max. cylinder temperature: 375 °C Machine hours: Pump: 29,098 h Fully automatic operation: 25,271 h Additional equipment: 2-fold hydraulic core pull control at BWAP, operator side opposite 16 temperature control zones for hot runner system MC 5 control system Trend graph for 12 freely selectable actual process values 89.8047 Quality monitoring package 89.751 Linear robot KM LRX 150 MC5 3.0 control system X-axis: 900 mm, Y-axis: 1,200 mm, Z-axis: 3,000 mm Payload: 15 kg No safety enclosure included!!! Lhjdpfsw U Aicex Ab Ujn Location: Near Bayreuth

Year of construction: 2022, condition: ready for operation (used), A new injection molding machine including robot is available. 1) Krauss Maffei injection molding machine, year of manufacture: 2022, clamping system: hydromechanical clamping system with 2 platens. Plasticizing: 8100, screw diameter: 105mm, nozzle radius: 35mm, nozzle bore: 6mm, clamping force: 1700t, control: MC6. 2) Industrial robot Kuka IR 1200 R3100.2 F/K, max. payload: 120kg, reach: 3100mm, repeatability: +/-0.05mm, control: KR C5. Documentation available. On-site inspection is possible. Lodpfx Aevpvlcob Uehn

Condition: excellent (used), Year of construction: 2001, Injection Moulding Machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Software language: German Operating hours: 70,000 Clamping Unit Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Lhedpfew U D I Tjx Ab Ujn Mould platen size (H x W): 1,610 mm x 1,530 mm Tie bar spacing (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector – stroke: 250 mm Injection Unit Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and Weight Dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tons

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036943, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, is the perfect entry-level solution for all-electric injection molding, enabling fast and innovative responses to market demands. It combines high performance, straightforward operation, and short delivery times. This machine can be applied in a wide range of industries, such as packaging, electrical and electronics, medical technology, and automotive. Your benefits: – Optimized price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to the all-electric machine design – Fast delivery times enabled by the basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670020) CONTROL SYSTEM • MC P1 with 15" TFT color touchscreen with multitouch functionality CLAMPING UNIT • Clamping force: kN 800 • Max. mold opening force: kN 120 • Clearance (h x v): mm 470 x 420 • Mounting platen (h x v): mm 610 x 560 • Mold installation height min. - max.: mm 150 - 400 • Opening width: mm 750 • Max. mold opening stroke: mm 350 • Ejector drive: electric • Ejector stroke: mm 100 • Ejector force forward/back: kN 22 / 22 • Ejector speed forward/back: mm/s 300 / 300 • Max. mold weight: kg 600 INJECTION UNIT • Screw diameter / type: mm 40 / Standard • Effective L/D ratio: 20.0 • Injection pressure: bar 1860 • Shot volume: cm³ 201 • Shot weight at max. stroke for PS: g 183 • Injection speed: mm/s 200 • Injection flow: cm³/s 251 • Screw drive / speed: rpm 334 • Plasticizing rate (standard): g/s 24.7 • Nozzle contact force: kN 34 ELECTRICAL PARAMETERS • Connected load: kW 20.6 • Installed heating power: kW 11.5 • Power supply: V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: t 5.6 Ljdjw Ur I Ujpfx Ab Uehn • Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT • Low-wear plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface for cascade control, 4-fold • Euromap interfaces for handling: E18, E63 • Euromap interface (central computer): E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression molding function • Graphic analysis package The machine is located at our factory in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your inquiry.

Year of construction: 2002, condition: ready for operation (used), A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026. Lhedpfx Aewut Hyob Uen

Year of construction: 2010, condition: excellent (used), Krauss Maffei KM 180 - 750 AX injection molding machine Fully electric machine Year of manufacture -2010 Replaced new plastification system motor MC5 control system with color monitor, integrated control panel and built-in disk station. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 50 mm Ledpfx Ajn Atndjb Ushn TECHNICAL DATA Closing unit - Closing force of the mold: kN 1760 - Clamping plate dimensions (h x v): mm 790 x 740 - Clearance between columns (h x v): mm 560 x 510 - Mold opening path max: mm 450 - Mold installation height min/max: mm 200/600 - Plate opening stroke: mm 1050 - Ejector stroke: mm 130 - Ejector force: kN 49 Injection unit - Auger diameter: mm 50 - Ls/D ratio: 20,2 - Injection pressure: bar 1892 - Injection volume: cm3 393 - Injection weight for PS: g 357 - Injection capacity: cm3/s 314 - Screw speed, max: rpm 320 - Nozzle clamping force: kN 29,4 Electrical parameters - Connection value: kW 38 - Heater power: kW 15,6 - Number of cylinder heating zones: - 5 - Dry cycle time according to Euromap 6: 1/h 2000 - Dry cycle time according to Euromap 6: s 1.8 Weight and dimensions - Net weight with control cabinet: t 6.5 - Machine dimensions (L x W x H): m 6.07 x 1.92 x 2.01

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120 Ledpfsuggb Dox Ab Uohn  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Year of construction: 1998, condition: ready for operation (used), Clamping force: 500kN, screw diameter: 30mm, injection volume: 101cm³, injection weight: 92g, injection pressure: 1488bar, clamping plate dimensions X/Y: 540mm/540mm, distance between tie bars: 321mm, mold opening: 350mm, mold height min./max.: 200mm/550mm, weight: approx. 2300kg. Including 1 hydraulic core puller. Lhsdpfstw Durex Ab Usn

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 800 - 12000 MX injection molding machine Lhjdpsvcpdrjfx Ab Uon Year of manufacture - 2007 Closing system : - Mould closing force: kN 8000 - Opening force of the mold: kN 560 - Clamping plate dimensions (h x v): mm 1600 x 1530 - Clearance between columns (h x v): mm 1120 x 1000 - Mold opening path: mm 1600 - Mold installation height (min - max): mm 500-1100 - Plate opening stroke: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Injection system : - Screw diameter: mm 135 - Injection pressure: bar 1389 - Injection volume: cm3 8588 - Injection weight for PS: g 6098 - Screw speed, standard/optional: rpm 121/153 - Injection capacity (standard) Electric-hydraulic equipment - Pump motor power rating: kW 110 - Installed heater power: kW 57 - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 965 - Oil tank capacity: l 1500 Dimensions and weight - Net weight with control cabinet: t 45 - Machine dimensions (L x W x H): m 10.81 x 2.92 x 2.51

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036683, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (order 38670011) (machine no.: 61036683, new, year of manufacture 2013) Ljdpfx Ajugfupob Uehn CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 1600  Mold opening force, max kN 120  Clear width (h x v) mm 570 x 520  Clamping platen (h x v) mm 770 x 720  Tool installation height min. - max. mm 200 - 500  Opening width mm 950  Mold opening stroke max. mm 450  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 33 / 33  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 1200 SPRING UNIT  Screw diameter / type mm 50 / standard  Effective Ls/D ratio 20.2  Injection pressure bar 1892  Stroke volume cm³ 393  Shot weight at max. stroke for PS g 358  Injection speed mm/s 200  Injection flow rate cm³/s 393  Screw drive/speed 1/min 267  Plasticizing flow (standard screw)4) g/s 36.5  Nozzle contact force kN 42 ELECTRICAL PARAMETERS  Connected load kW 31.2  Installed heat output kW 15.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 9.7  Length x width x height m 5.65 x 1.82 x 1.95 ADDITIONAL EQUIPMENT  Open nozzle  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Euromap interface handling E18  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression molding circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Year of construction: 2008, condition: ready for operation (used), Press force: 1100kN, screw diameter: 35mm, injection weight: 140g, stroke volume: 154cm³, injection pressure: 2429bar, max. barrel temperature: 375°C, weight: approx. 8000kg, control: MC 5 3.0, operating hours: 25271h, pump hours: 29098h. Including one linear robot KM LRX 150, travel X/Y/Z: 900mm/1200mm/3000mm, load capacity: 15kg. Documentation available. On-site inspection is possible. Lhodpfxswz N Tvs Ab Uen

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 800 – 12000 MX injection molding machine Year of production - 2006 Closing system: - Mold closing force: kN 8000 - Mold opening force: kN 560 - Dimensions of the mounting plate (h x v): mm 1600 x 1530 - Clearance between columns (h x v): mm 1120 x 1000 - Mold opening path: mm 1600 - Mold installation height (min - max): mm 500-1100 - Plate opening stroke: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Lodotmq Akopfx Ab Ushn Injection system: - Screw diameter: mm 135 - Injection pressure: bar 1389 - Injection volume: cm3 8588 - Injection weight for PS: g 6098 - Number of screw revolutions, standard/option: rpm 121/153 - Injection efficiency (standard) Electric-hydraulic equipment - Nominal power of the pump motor: kW 110 - Installed power of heaters: kW 57 - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 965 - Oil tank capacity: l 1500 Dimensions and weight - Net weight with control cabinet: t 45 - Machine dimensions (length x width x height): m 10.81 x 2.92 x 2.51

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036940, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (order 38670011) (machine no.: 61036683, new, year of manufacture 2013) Lodougfw Djpfx Ab Ujhn CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 1600  Mold opening force, max kN 120  Clear width (h x v) mm 570 x 520  Clamping platen (h x v) mm 770 x 720  Tool installation height min. - max. mm 200 - 500  Opening width mm 950  Mold opening stroke max. mm 450  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 33 / 33  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 1200 SPRING UNIT  Screw diameter / type mm 50 / standard  Effective Ls/D ratio 20.2  Injection pressure bar 1892  Stroke volume cm³ 393  Shot weight at max. stroke for PS g 358  Injection speed mm/s 200  Injection flow rate cm³/s 393  Screw drive/speed 1/min 267  Plasticizing flow (standard screw)4) g/s 36.5  Nozzle contact force kN 42 ELECTRICAL PARAMETERS  Connected load kW 31.2  Installed heat output kW 15.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 9.7  Length x width x height m 5.65 x 1.82 x 1.95 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface pneum. Cascade 4-fold  Euromap interface handling E18 + E67  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Electrical preparation for hydraulic auxiliary unit  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression molding circuit  Graphic analysis package  Swivel device for injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Year of construction: 2016, condition: ready for operation (used), Clamping force: 2500kN, injection unit: 1400CX, pump motor power: 45kW, plasticising system: HPS-UN, screw diameter: 60mm, injection volume: 820cm³, plasticising stroke: 82.4mm, tie bar spacing: 530mm. Machine dimensions X/Y/Z: approx. 6500mm/2100mm/2300mm, weight: approx. 15000kg, control: MC6, pump hours: 42115h, automatic hours: 39148h. Includes conveyor belt MK GUF-P 2000 AF. Documentation available. An on-site inspection is possible. Expected to be available from December 2025. Lhsdpfew Exrpox Ab Uon

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine Year of production - 2011 LRX 500 robot Z axis 4000 mm X axis 1500 mm Y axis 1250/1250 mm Lhodpfx Abewqdyis Usn Hydraulic-mechanical two-plate closing system with 4 pressure cushions and 4 locking units on the moving plate. PV - injection unit regulation. MC 5 control system with color monitor, integrated control panel and USB data carrier. Plasticizing system Complete plasticizing system for thermoplastics with screw diameter 135 mm, with check valve and open nozzle Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - dimensions of the mounting plate (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - pressure injection: bar 1389 - injection volume: cm3 8588 - injection weight for PS: g 6098 - injection efficiency: cm3/s 1414 Electro-hydraulic equipment - rated power of the pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of the place for installation (length x width x height): m 11.72 x 2.92 x 2.71

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC) Lhsdpsud H Dmofx Ab Usn  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines Krauss Maffei are available. 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions X/Y/Z: approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control: MC4, operating hours: approx. 86000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions X/Y/Z: approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control: MC4, operating hours: approx. 82000h. Documentation available. An on-site inspection is possible. Lhsdpfxow Emybe Ab Uen

Condition: as good as new (ex-display), Year of construction: 2023, Krauss Maffeii KM 120-380 PX injection molding machine Year of production : 2023 All-electric machine Five-point double lever-knee closing unit mechanism (three-plate unit) with servo-electric drive. Injection unit with servo-electric drive for injection and plasticization and servo-hydraulic drive for movement of the entire injection unit. MC6 industrial computer-based real-time Ethernet control system Plasticizing system Complete plasticizing system for thermoplastics with HPS-M screw with a diameter of 40mm Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE Closing unit - Mold closing force: kN1200 - Opening force of mold: kN 180 - Dimensions of the clamping plate (h x v):mm 640 x 590 - Clearance between columns (h x v):mm 470 x 420 - Mold opening stroke: mm 400 - Mold height min.- max. with option 45,468:mm 180 - 550 - Opening width with option 45.468: mm 950 - Ejector stroke: mm 175 - Forward/reverse ejector force: kN 22 / 10 - Ejector speed:mm/s 350 Injection unit - Auger diameter:mm 40 - Ls/D ratio: - 20 - Injection pressure:bar 1860 - Injection volume:cm3 201 - Injection weight:1): g 183 - Injection speed: mm/s 125 - Injection capacity: cm3/s 157 Ljdsvgdumopfx Ab Uohn - Screw speed: 1/min 334 - Plasticizing capacity 1): g/s 24.7 - Torque: Nm 337 - Nozzle pressure force: kN 34 Electrical parameters - Connection value:kW 13.8 - Protection: A 63 - Installed heater power: kW 11,5 - Number of cylinder heating zones: - 5 - Dry cycle time / stroke according to Euromap 6 2):s/mm 1.5 / 329 - Oil tank capacity: dm3 120 Weight and dimensions - Net weight with control cabinet: t 6.9 - Dimensions of the machine (L x W x H) 3): m 5.3 x 1.60 x 1.88

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 61037426, clamping force: 2,500 kN, screw diameter: 60 mm, displacement volume: 792 cm³, injection pressure: 2.42 bar, injection weight: 721 g, mold height (min.): 250 mm, ejector force: 47,000 N, ejector stroke: 200 mm, opening stroke: 1,250 mm, installation height: 700 mm, total length: 8,230 mm, total width: 2,320 mm, total height: 2,210 mm, overall weight: 19,500 kg, heating capacity: 292 kW (397.01 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 3,700,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The all-electric PX series is the answer to your questions about more flexibility with further increases in productivity. Robust mechanics, high-precision and dynamic drive technologies and intelligent energy management make the PX a reliable, productive and efficient performer in any injection molding operation. An ergonomically optimized working height, maximum clearance under the clamp and excellent accessibility ensure maximum user-friendliness. The PX series impresses with its flexibility throughout its entire service life. TECHNICAL DATA: KM 251 / 2000 PX G02 (order 38621992) CONTROL  MC6 with 20.5" TFT color screen and multi-touch function CLAMPING UNIT  Clamping force kN 2500  Mold opening force, max kN 375  Clear width (h x v) mm 735 x 685  Clamping platen (h x v) mm 1000 x 950  Tool installation height min. - max. mm 250 - 700  Opening width mm 1250  Mold opening stroke max. mm 550  Hydraulic ejector drive  Ejector stroke mm 200  Ejector force forwards/backwards kN 47 / 22.5  Ejector speed forwards/backwards mm/s 350 / 350  Max. Mold weight kg 3700 SPREAD UNIT  Screw diameter / type mm 60 / standard  Effective Ls/D ratio 23.3  Injection pressure bar 2420  Stroke volume cm³ 792  Shot weight at max. stroke for PS g 721  Injection speed mm/s 125  Injection flow rate cm³/s 353  Screw drive/speed 1/min 327  Plasticizing flow rate g/s 82.8  Nozzle contact force kN 57 ELECTRICAL PARAMETERS  Connected load kW 63.5  Installed heating capacity kW 29.2  Power supply V / Hz 400 / 50 WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 19.50  Length x width x height m 8.23 x 2.32 x 2.21 Lhsdpfx Asuaavzsb Usn ADDITIONAL EQUIPMENT  Enlarged mold opening width  Low-wear plasticizing (ZE23.03)  Hydraulic core pull 2+2-fold  Core pull pneumatic 1+1 - fold  Air valves 1+1-fold  Pneumatic cascade 4-fold  Euromap interfaces E18, E67, E77  Water battery 4 - compartment  Hot runner control points 12 - compartment  Adaptive Process Control (APC) The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Year of construction: 2008, condition: ready for operation (used), A 3-component injection moulding machine Krauss Maffei with Multinject system, conveyor belt, cooling and hydraulic technology, and various accessories is available. Pump capacity: 37kW, screw diameter 1/2/3: 25mm/35mm/18mm, injection volume 1/2/3: 160cm³/220cm³/55cm³, nozzle bore: 6mm, non-return valves: RSP 4F. Total system dimensions X/Y/Z: approx. 5700mm/2000mm/2200mm, conveyor belt dimensions X/Y/Z: approx. 2300mm/300mm/600mm-700mm, weight: approx. 12000kg, control: MC4, pump hours: 51709h, automatic hours: 47009h. Without auxiliary unit. Documentation available. An on-site inspection is possible. Expected to be available from December 2025. Lsdpfxjw Emyhs Ab Ujhn

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 Lodpfswyxbgsx Ab Ujhn General description: Hydro-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. The machine is equipped with a PV-type proportional valve injection unit adjustment system. Control is handled by the modern MC6 control system, based on an industrial PC with real-time Ethernet technology. The control panel features an integrated 19-inch touchscreen with a color display, LED backlighting, and visualization of all processes using ProcessDesigner. Plasticising unit: Complete unit for thermoplastics processing Wear-protected (abrasion-resistant) version Screw diameter: 105 mm Check valve and open nozzle Technical data: Clamping unit: Clamping force: 9,000 kN Mould opening force (pressure pads): 630 kN Platen size (W x H): 1,660 x 1,530 mm Tie bar spacing: 1,180 x 1,000 mm Max. mould opening stroke: 1,600 mm Mould height (min – max): 500 – 1,100 mm Maximum opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1,778 bar Injection volume: 4,546 cm³ Shot weight (PS): 3,228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle contact force: 166 kN Electrical and hydraulic equipment: Pump motor rating: 120 kW Heater rating: 59 kW Number of barrel heating zones: 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1,450 l Dimensions and weight: Net weight (with control cabinet): 40 t Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Condition: excellent (used), Year of construction: 2004, Krauss Maffei KM 2300 - 12000 MC injection molding machine Year: 2004 Control type: MC 4 Number of operating hours 93 900 Closing unit Clamping force: 23000 kN Mould opening force, max.: 1420 kN Moving platen feed force Opening: 227 kN Moving platen feed force Closing: 203 kN Mould platen size (h x v): 2830 mm x 2400 mm Distance between columns (h x v): 2000 mm x 1600 mm Mould opening stroke: 2600 mm Min. mould height: 1100 mm Maximum mould height: 1800 mm Maximum daylight: 3700 mm Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm Ls/D ratio: 23 Injection pressure: 1389 bar Sweep volume: 8588 ccm Shot weight, PS: 7815 g Injection rate: 1019 ccm/s Screw speed: 113 1/min Maximum plasticization rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Nominal pump motor capacity: 132 kW Installed heating power: 997kW Adjustable barrel heating zones: 7 Number of drying cycles: 350 1/h Tank capacity: 2500 ltr. Dimensions and weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143,000 kg Ljdpfswq Ed Aex Ab Ushn Maximum mold weight: 62,000 kg LRX 1000 robot X-axis - 2,000 mm Y-axis - 3,000 mm Z-axis - 5,000 mm

Condition: excellent (used), Year of construction: 2002, Krauss Maffei KM 80 -160 C2 injection molding machine Year: 2002 Control version: MC 4 Closing system: Clamping force: 800 kN Mould opening force, max.: 55 kN Moving platen feed force Opening: 31 kN Moving platen feed force Closing: 20 kN Mould platen size (h x v): 610 mm x 610 mm Distance between connecting rods (h x v): 405 mm x 405 mm Mould opening stroke: 500 mm Min. mould height: 250 mm Max. daylight: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: 20/11 kN Lodpfx Aov Dhnlob Ushn Injection system: Screw diameter: 30 mm Ls/D ratio: 26 Injection pressure: 2025 bar Sweep volume: 85 cm3 Injection weight, PS: 77 g Electrical and hydraulic equipment Nominal pump motor capacity: 11 kW Installed heating power: 9 kW Adjustable barrel heating zones: 5 Number of drying cycles: 1800 1/h Tank capacity: 270 ltr. Dimensions and weight Machine dimensions: 3.81 m x 1.40 m x 2.00 m Total machine weight: 3200 kg Max. mold weight: 860 kg