Used Gildemeister As 67 for sale (240)

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Manufacturer: GILDEMEISTER Kdjdpfx Aoxmd Txebnor Type: AS - 16 Year of construction: 1990 Max. Rod diameter: 16 mm Number of spindles: 6 Pcs Guide rod length: 3,3 m Further information: The machine can be viewed under power by arrangement.

Condition: new, Lathe completely overhauled, both electrically and mechanically, restored to like-new condition with repainting. Replacement of the electrical cabinet with a Siemens Series 1500 PLC. Overhead control panel. Replacement of cables and microswitches. Kodod Hza Ispfx Abnsdr Overhaul of the main motor. Replacement of the leaking lubrication oil pump. Replacement of the tool cooling pump. Check of the door closing system with an electromechanical system. Pneumatic unit. Loader interface. End-of-bar position 1. Replacement of all bearings. Overhaul of carriages. Replacement of camshafts. Replacement of all lubrication distributors. Replacement of working and threading clutches. Pneumatic tailstock. Fixed and rotating front chucks. Diameter variation 20. CE certification with attached documents.

Condition: new, Year of construction: 2025, Gildemeister 20, completely rebuilt to like-new condition - AC motor for production time control Kjdpsfzk S Defx Abnodr - AC motor for threading - GM-type, soundproofed housing - Frequency converter for programming spindle speed - 20 mm, 25 mm, 28 mm bar passage with integrated loader - Optional: CNC cross slides for X and Z axes, CNC pick-up with CNC recovery slide - CE marking

Condition: used, Year of construction: 1973, 3 Gildemeisters AS32-6 in good state for sale - must go due to cessation of activities Different separate spare parts available, among which a new tapping device, a new bronze crown wheel for the main drive, a cross drill device, several gripping spindles for processing the rear of product and several other spare parts €9.500 per Gildemeister Kjdpfx Abed S E Itonsdr

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,975 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, center width: 600 mm, center height: 340 mm, controller model: Siemens Sinumerik 840D SL, TECHNICAL DETAILS Maximum turning height: 340 mm Turning diameter over bed: 680 mm Turning diameter over slide: 565 mm Distance between centers: 600 mm Spindle bore: 65 mm Spindle speed: 0–5,000 rpm Travel in X-axis: 260 mm Travel in Y-axis: 635 mm MACHINE DETAILS Control system: CNC Controller: Siemens Sinumerik 840D SL Power: 25 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,500 x 2,300 mm Weight: 6,500 kg Operating hours: 10,975 h Kjdpfszuwx Djx Abnedr EQUIPMENT Documentation CE marking CE certificate

Condition: ready for operation (used), Year of construction: 2001, operating hours: 60,837 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 635 mm, spindle motor power: 28,000 W, total width: 1,750 mm, overall weight: 5,700 kg, controller manufacturer: HEIDENHAIN, number of axes: 4, This 4-axis Gildemeister CTX 400 twin was manufactured in 2001. It features a maximum swivel diameter over bed of 570 mm and a maximum turning length of 635 mm. The machine is equipped with a Heidenhain CNC Pilot control system and offers a speed range of 25 – 5,000 min⁻¹. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 twin horizontal turning machine we have for sale. Contact us for further details. - Maximum swivel diameter over bed: 570 mm- Maximum swivel diameter over cross slide: 420 mm- Max. turning length: 635 mm- Bar diameter (main and counter spindle): 65 mm- Chuck diameter (max.): 250 mm- Speed range: 25 – 5,000 min⁻¹- Drive power (main spindle): 28 / 21 kW (100% / 40% duty cycle)- Max. torque (main spindle): 320 / 240 Nm- Drive power (counter spindle): 12 / 9 kW- Spindle bore: 79 mm (spindle bearing 120 mm)- C-axis: Available (for main and counter spindles / C-axis operation)- Control system: Heidenhain CNC Pilot- Machine width: approx. 1,750 mm (without auxiliary units such as chip conveyors)- Operating Hours: 60,837 h- Voltage: 400 V / 230 V / 24 V- Power: 44 kVA- Frequency: 50 Hz- Current: 64 A / 80 A- Included Accessories: 2x jaw chucks, 2x clamping chucks, soft jaws, base jaws, various collets (RD65, RD80, E185, E173, etc.), reduction tubes, chip conveyor (Bürener Maschinenfabrik), cooling unit/filter system, slotting unit (Hub 32), complete documentation manuals Ksdpfx Aozvxkdobnodr Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,229 h, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller manufacturer: FANUC, controller model: 310i-S, number of axes: 8, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Specification • Mechanical and electrical preparation for fire extinguishing system • Coolant system suitable for oil (max. 32 cSt) and emulsion • Coolant tank capacity: 600 liters • Coolant filtration: 50 µm • Coolant chiller unit • Coolant pump pressure: 8 bar • Coolant pump pressure: 20 bar • Chip conveyor • Chip discharge height: 1250 mm • Bar loader: IEMCA Boss 332E • Maximum bar length: 3 m • Oil mist separator: Bristol B270/E • Sliding headstock travel: 80 mm • Tooling on slides • Tool breakage detection system • Machine commissioning (max. 3 days) • Spindle bore: 25 mm (upgraded) • Chip discharge height: 1250mm Kdjdpfxox D H I To Abner Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 2005, Technical details: swing diameter: 320 mm control: 840 D SIEMENS turning speeds: 5000 1/min spindle drive: 20 / 27 kW chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm turret head: 12 Pos. tool holder: VDI 40 toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, Ksdpemcibwsfx Abnedr 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" (in total) MACHINE WILL GET NEW (OVERHAULED) SPINDLE (0 hours) *

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Accessories: Kedpev Epzvofx Abnsdr Chip conveyor Tool holders, chuck jaws

Condition: used, Year of construction: 2003, turning diameter 210 mm turning length 580 mm control 840 D Siemens centre height 190 mm turning diameter over bed 330 mm turning dia. over face-slide 260 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 10 / 7,5 kW max. Torque 115 / 86 Nm spindle bore 68,5 mm max. usable bar diameter 51 mm C - Axis 0,001 ° travel -x axis 185 mm travel -z axis 455 mm number of toolpositions 12 pos. tool taper VDI 30 Driven Tool Stations: 6 pos. tailstock adjustment 400 mm intake pressure max. 4.000 N rapid traverse X: 20 / Z: 30 m/min Feed force ( X / Y / Z ) 4,5 kN total power requirement 21 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 8,0 x 2,2 x 2,0 m CNC Turning- and Milling Center GILDEMEISTER - CTX 310 V3 Kjdpotqmmuofx Abnodr - incl. 2x reduction tubes

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed: 560 mm Swing diameter over cross slide: 250 mm Spindle bore: 65.3 mm Max. power: 15 kW Speeds: 11.2 - 2,240 rpm Distance between centers: 1,000 mm Quill diameter: 80 mm Quill taper: MT 5 Including chip conveyor Including complete documentation Kjdpfx Aovn Rlzjbnedr Immediately available from stock

Condition: used, Year of construction: 2003, Technical details: turning diameter: 640 / 400 mm turning length: 1500 mm control: Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis): ±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/24/60 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 12 / 23 kW Torque of milling spindle: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool, milling spindle: 1,6 s Spindle 1 RPM: 4000 1/min Spindle 1 power: 36/ 45 kW Spindle 1 Torque: 730 Nm Spindle 1 max. bar diameter: 90 Spindle 2 RPM: 4000 1/min Spindle 2 power: 36 / 45 kW Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 c-axis: 0,001 ° Travel turret 2 x: 225 mm Travel Turret 2 z: 1595 mm RPM of rotary tools turret 2: 4000 1/min no. of tools in turret 2: 12 VDI 40 high-pressure pump: 20 bar total power requirement: 110 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3 x 4,6 x 3,1 m Accerories Chip conveyor Automatic door High performance turning and milling center with milling head (X, Y, Z, B-Axis), tool magazine with 120 pos. HSK-A 63. Excellent for manufacturing excentric parts. Coolant system with 1000 l tank and coolant system 4 kW. Both spindles have differencial pressure clamping system Steayrest for lower turret dia 8-101 mm. Parts gripper for turret No. 2 with 3-jaw chuck for parts with max. dia. 140 mm. Conveyor belt for finished parts. Preparation for 3D-probe Toolmonitor Artis Machine can be shown under power. Kedsyv Dnkepfx Abnjdr *

Condition: used, Year of construction: 2007, Technical details: turning diameter: 160 mm turning length: 300 mm control: Siemens 840D Spindle 1 Power: 22 kW Spindle 1 RPM: 5000 1/min Spindle 1 max. bar diameter: 65 Spindle 1 Torque: 150 Nm Spindle 2 power: 16,8 kW Spindle 2 RPM: 5000 1/min Spindle 2 torque: 100 Nm Travel for pick up of 2nd Spindle: W2=690 mm dimensions of the machine ca.: ´4,5x2,0x2,3 m weight of the machine ca.: 9 t Kdodpfezd Tcwox Abnjr Accerories Spindle 1 Collet chuck Spindle 2 Collet Chuck Chip Conveyor Parts catcher CNC turning center with 3 turrets with rotary tool drives and 2 spindles. There is an internal coolant system for the turrets with individual pumps *

Condition: used, Year of construction: 2008, control Siemens 840D powerline swing diameter 640 mm turning diameter 640 mm spindle distance 1.930 mm x1 axis 550 mm Kdedpfx Aezupqrjbnjr y1-axis 220 mm z1 axis 1585 mm b-axis 240 ° x2-axis 225 mm z2-axis 1.400 mm z3-axis 1.500 mm chuck diameter 250 - 400 mm bar material dia. 90 mm spindle head 220 h5 spindle bore diameter 107 mm diameter in the front bearing 150 mm chuck diameter 400 mm bar material dia. 90 mm spindle head 220 h5 spindle bore diameter 107 mm diameter in the front bearing 150 mm turning speeds 3.200/4.000 U/min tool taper HSK63-A spindle tunring speed 12.000 U/min drive capacity - main spindle 100/40% ED 13,2/22 kW Torque (100% ED / 40% ED) 60/100 Nm bearing diameter 80/55 mm Number of working hours ca. 96.571 h spindle hours ca. 43.720 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Year of construction: 2005, Gildemeister GLD25 Kdjdpfjzvpaijx Abnjr Machine in very good operating condition. It can be inspected at any time during production. Only 10,800 operating hours.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8042942713C, CNC lathe Manufacturer: Gildemeister Type: CTX 310 V3 Machine no.: 8042942713C Year of manufacture: 2008 Kjdpozvmnkefx Abnsdr Control system: Heidenhain IT Maximum turning diameter: 500 mm Spindle bore: 65 mm Drive power: 40/100% ED: 16/12 kW Speed range: 25-6000 rpm Weight (approx.): 3500 kg - 12-station turret - VDI 30 - Chip conveyor - C-axis - Powered tools, 12 stations - Bar feeding package - LNS short magazine, QuickLoad Servo 3 - Tailstock - Hainbuch ToplusMini centering chuck, 65 mm Subject to errors and omissions.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 01360004581, overall weight: 5,600 kg, CNC turning machine Manufacturer: Gildemeister Type: CTX 410 V3 Machine No.: 0136004581 Year of manufacture: 2006 Control system: Siemens 840D ShopTurn Swinging diameter: 505 mm Chuck diameter: 210 mm Spindle bore: 65 mm Drive power: 40/100% ED 21/28 kW Speed range: 25-5000 rpm Approximate dimensions: 4300x2000x1800 mm Approximate weight: 5600 kg - 12-position turret - VDI 40 - C-axis - Powered tools, 12 stations - Bar feeding package - Chip conveyor - Tailstock - SMW Autoblok 210BB - Powered tool holders, 3x axial - Powered tool holders, 2x radial - Various other tool holders - New motor for turret Kedpfxozvmizs Abnsdr Subject to errors and omissions.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 02260005181, overall weight: 6,500 kg, CNC turning machine Manufacturer: Gildemeister Type: CTX 420 Linear V4 Machine No.: 02260005181 Year of manufacture: 2005 Control system: Siemens 840D ShopTurn Swinging diameter: 680 Chuck diameter: 250 Drive power 40/100% duty cycle: 37/25 kW Speed range: 20-5000 rpm Weight approx.: 6500 kg - 12-position turret Kdedezvmhdepfx Abner - VDI 40 - C-axis - Y-axis - Driven tools, 12 stations - Chip conveyor - Tailstock - SMW Autoblok 250 BH Subject to change without notice.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 58,132 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, spindle motor power: 21,000 W, total height: 1,700 mm, total width: 1,700 mm, overall weight: 5,700 kg, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT, product length (max.): 3,565 mm, workpiece diameter (max.): 420 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details. • Control Unit Brand: HEIDENHAIN • Control Unit Model: CNC PILOT • Distance Between Centers: 600 mm • Swing Over Bed: 570 mm • Swing Over Cross Slide: 470 mm • Maximum Turning Diameter: 420 mm Kdedpfozufq Iox Abnjr • Spindle Nose: DIN 55026 Flat Flange Size 170h5 • Front Bearing Diameter: 120 mm • Spindle Bore: 79 mm • Maximum Chuck Diameter: 250 mm • Maximum Torque: 320 Nm • Turret Type: Disc Turret • Tool System: VDI 20/20 • Tailstock Taper: MK4 • Tailstock Quill Diameter: 80 mm • Tailstock Quill Travel: 550 mm • Feed Drive X-Axis: 3.3 kW • Feed Drive Z-Axis: 3.3 kW • Lubrication Pump Power: 0.1 kW • Coolant Pump Power: 1.4 kW • Hydraulic Pump Power: 1.5 kW • Rapid Traverse X-Axis: 24000 mm/min • Rapid Traverse Z-Axis: 20000 mm/min • Feed Rate: 0.025–7000 mm/min • Thread Pitch Range: 0.025–3500 mm/min • Coolant Tank Capacity: 100 L • Power Supply: 400 V • Frequency: 50 Hz • Connected Load: 44 kVA • Rated Current: 64 A • Control Voltage: 24 V • Operating Hours: 58,132 h • CE Certified • Scope of delivery as shown, including 3 internal clamping heads • Configuration as shown: VDI30 disc turret Optional Equipment: • Tailstock • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2000, We offer this used Gildemeister TWIN 32 CNC turning and milling center, manufactured in 2000. DMG Gildemeister TWIN 32 with Y-axis Technical specifications: Year of manufacture: 2000 Main spindle: Speed: 8,000 rpm Maximum torque: 100 Nm Maximum power: 26 kW C axis: 0.001° Spindle bore: 32 mm Clamping cylinder: Through-hole cylinder Chuck: Hainbuch chuck Spindle counterspindle: Speed: 8,000 rpm Maximum torque: 100 Nm Maximum power: 26 kW C axis: 0.001° X axis: 145 mm Z axis: 380 mm Cylinder Clamping: Partial through-hole cylinder Chuck: Hainbuch chuck Kdodpfozvfq Rox Abner Turret No. 1: Number of stations: 12 Tool holder: VDI 25 Tool drive: 6,000 rpm X-axis: 220 mm Y-axis: 60 (+/- 30) mm Z-axis: 320 mm Turret No. 2: Number of stations: 12 Tool holder: VDI 25 Tool drive: 6,000 rpm X-axis: 120 mm Z-axis: 345 mm Equipment/accessories: Chip removal: Chip conveyor Workpiece removal: Gripper + step conveyor Machine data: Control: Sinumerik 840 D The geometry has been checked and adjusted on the machine. (Videos of the geometry setup can be sent) Linear guides on the Z3 axis have been replaced. The machine is fully operational and can be tested on-site while plugged in. Backups of machine data have been made on the machine. If you have any questions or require additional information, please send us a message or call us.

Condition: used, Year of construction: 2002, DMG Gildemeister CTX310 CNC Lathe with GE Fanuc Series 21i-T CNC Control, 12 Position Tool Turret, Collet Chuck, Hydrafeed Barfeed. S/No. 4662 (2002) Hours 39693 & 14215. S/No. 938205 (2002). Country of Origin: Italy Please Note: Filtermist shown not included in this lot, can be purchased separately. Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Ksdpfx Abjzvcqhenodr

Condition: excellent (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter in front bearing: 140 mm Spindle bore: 107 mm Kdedpfxex Sx Hts Abner Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis: 10/10 m/min Turret: Number of tool stations: 12 Of which driven tool stations: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-position turret, VDI 50, including 6 driven tool stations in turret, manufacturer SAUTER, DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • Extraction unit, manufacturer LTA • Various tool holders VDI 50 • CE-compliant In 08/2025, GILDEMEISTER service replaced the following parts: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 line-commutated return module, 1 control insert for 1 axis, 1 controller module for 2 axes inverter servo drive, 1 Simodrive power module for 1 axis motor. Total repair cost: EUR 17,000.00 net Important note: On this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year 1995), the positioning of the C-axis does not function and the driven milling unit rotates but does not engage. Otherwise, the machine is in perfect condition. A demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Gildemeister CNC lathe Model CTX 320 Linear Year : 2003 Working length : 600 mm. Max. working diameter : 245 mm. Spindle speeds : 6000 rpm. Spindle bore 80 mm Spindle speeds on the Sub spindle : 4000 rpm. Spindle borer : 65 mm. Number of tools : 12 pcs. No. of rotating stations : 12 pcs. Spindle speeds rotating tools : 5000 rpm. X-axis travel : 160 mm. Z Travel : 450 mm. Y-axis travel : +/- 35 mm. Control : Siemens Cycle hours : 29000 Ksdpfx Abjzu R E Djnsdr Equipped with : -Subspindle -ECO LM 65 loader -2 straight rotating tool -2 angle rotating tool -6 holder -Chuck -Manuals

Condition: excellent (used), I have a GILDEMEISTER CTX600E V3 CNC lathe with powered tool drive for sale. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX600E V3 Control System: Heidenhain 3190 Country of origin: Germany Year of manufacture: 1998 The machine is fully equipped with fixed, powered tool holders, as well as many soft and hard jaws. Machine parameters: - Turret: 12 tools in VDI-50 holders (6 powered tool slots) - Max. speed: 3600 rpm - C-axis - Powered tools - Hydraulic tailstock - Tool measurement probe - Max. turning diameter, X-axis = 500mm Kdedpfjzu Df Rex Abnsr - Max. turning length, Z-axis = 1000mm - Cooling system - Hydraulic 3-jaw chuck, 400mm - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 9 tons - Loading is included in the price The machine has undergone a complete inspection. It is in 100% working order, connected, and ready for operation. Stal-Com has been involved in the sale, service, and training of CNC machines from the DMG group for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers in Poland but also by customers from all over Europe and parts of Asia. Each machine can be inspected during production, as we also offer machining services. After purchasing a machine from our company, we provide training for the staff and can also set up production of parts at the customer's location. We cooperate with many companies on an ongoing basis, supplying them with new machine tools.

Condition: ready for operation (used), Gildemeister 852.14.00-00.21 circuit board (851.75.00-00.21), used, normal signs of wear, 100% functional. Ksdpei D U S Usfx Abnedr