Used Kirchner Leipzig Planer for sale (2,398)

Condition: used, Model - CR1100D Max. Width of planing - 1100 mml Min. Thickness of planing - 8 mm Max. Thickness of planing - 150 mm Min. Length of planing - 435 mm Bottom spindle speed - 4500 RPM Electric power - 75 kW Feed drive motor - 5 HP Pressure roller elevation motor - 2 HP| Dust hood outlet dimensions - O125 mm x 1, 200 mm x 4 Cutter-head diameter - 150 mm Dsdowf Hbrjpfx Alfswd Air pressure - 4~6 kg/cm Table height from floor - 990mm Machine dimensions (L x W x H) - 2800x2150x2000 Net weight (Approx) - 4600 kgs Gross weight (Approx) - 4950 kgs

Year of construction: 2021, condition: used, Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage. Dsdpszzdyusfx Alfjwd

Condition: new, CASADEI PF 52 TERSA Planer – Holzkraft CASADEI Dimensions and weights: - Length (product) approx.: 2750 mm - Width/depth (product) approx.: 1500 mm - Weight (net) approx.: 680 kg Planing: - Total length of tables: 2720 mm - Infeed table length: 1498 mm - Maximum chip removal in planing: 8 mm - Length of planing fence: 1200 mm - Height of planing fence: 190 mm - Swivel range of planing fence: 90 – 45 ° Dust extraction connection: - Diameter of dust extraction port: 120 mm Installation information: - Space requirement length: 2750 mm Djdpou T Hrcefx Alfowd - Space requirement width/depth: 1604 mm - Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Electrical data: - Power of drive motor: 7 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Planer cutterhead: - Type of planer cutterhead: TERSA - Diameter of planer cutterhead: 120 mm - Number of planer knives: 4 - Speed of planer cutterhead: 5000 min⁻¹ - Maximum planing width: 520 mm

Condition: new, Year of construction: 2026, machine/vehicle number: DMS 51 E, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, type of input current: three-phase, planing width: 510 mm, tool diameter: 100 mm, rotational speed (min.): 5,000 rpm, total length of planing tables: 860 mm, overall weight: 640 kg, Equipment: CE marking, Thickness planer DMS 51E with a three-row spiral cutterhead, 84 knives, four-way rotatable, and reversible indexable inserts 15x15x2.5mm. Planer width 510mm, 2 table slide rollers with fine adjustment in the thickness table. The thickness table is mounted on four large-sized spindles, ensuring stability and preventing tilting; the height adjustment of the thickness table is motorized via push buttons with fine adjustment and an electronic digital display, as well as an integrated handwheel on the side. Thickness table dimensions are 860 x 530mm, working/planing height is 3.5-230mm. Maximum chip removal is 6mm. Steel infeed roller with spiral teeth for optimal feed, and a satin-finished steel outfeed roller. Feed speed is continuously adjustable from 4-20 m/min. Djdpfxsz E A U Ns Alfowd Minimum working length is 240mm. Dust extraction nozzle Ø160mm, standard with noise protection cladding. The robust steel-cast iron construction ensures a perfect planing result. The machine is test-planed at our facility before delivery.

Condition: used, Year of construction: 1997, Working width: 500 mm Planer cutterhead: Strip cutter Dwedpfez I Iumsx Alfod Number of cutters: 4 Length of surfacing table: 2800 mm Adjustment of surfacing table: Lever Indication of chip removal: Scale Adjustable angle of the fence: yes Motor power: 5.5 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 900 kg

Condition: used, Year of construction: 1979, Working width: 630 mm Planing height: 220 mm Planing shaft: Strip cutter Number of cutters: 4 Height adjustment: Handwheel Planing thickness indicator: Scale Feed rate: infinitely variable Infeed roller: Rubber Outfeed roller: Rubber Table rollers: yes Motor power: 5.5 kW Dust extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Dwodpfx Asz I Iutolfsd Weight: 1000 kg

Condition: used, total width: 3,900 mm, total height: 1,800 mm, Colour: Grey Empty weight: 4.200 kg Dimensions (LxBxH): 190 x 390 x 180 cm - CE marking present: Yes - Serial number: 90-58-07 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 5: - - Spindle type: Top - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 6: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - Max. planing width [mm]: 240 - Max. planing height [mm]: 120 - Feed table length [mm]: 1440 - Feed roller diameter [mm]: 1400 - Feed motor [kW]: 5.5 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 150 - Options: Powered rollers in table - Feed speed: Manual - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 35 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 128 - Power [kW]: 80.0 - Transport dimensions: 1900mm x 3900mm x 1800mm (l x w x h) - Transport weight [kg]: 4200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Djdpjz Nc Nusfx Alfswd VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Second-hand Weinig Profimat 23 E automatic planing and moulding machine for four-sided planing and profiling of timber, with a long dressing table. Dwedpfx Alsz E Rbqjfsd Technical data: - Spindle 1: Bottom / 4 kW / 40 mm - Spindle 2: Right / 40 mm - Spindle 3: Left / shared motor with #2 / 40 mm - Spindle 4: Top / 5.5 kW / 40 mm - Spindle 5: Bottom / 4 kW / 40 mm - Spindles: 5 - Working width: 230 mm - Working height: 120 mm - Feed: 2.2 kW - Planing table length: 2,500 mm

Condition: used, SCM F410 Jointer 4-knife cutterhead Fence with comb guides Width 410 mm Table length 2600 mm Dwsdpfx Aoz Szbcslfjd Adjustable infeed table angle Well-maintained machine, quiet operation

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: AB / 162765, overall weight: 1,410 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 33 A, We offer this used SCM COMPACT XL 4-side planer, year of construction 2004. Serial number: AB/162765 Year of manufacture: 2004 year Weight: 1.410 kg Nominal voltage: 400 V Dwodpfoz Hacysx Alfed Phases: 3 Current: 33 A Frequency: 50 Hz Short-circuit current: 10 kA If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Combination jointer-planer machine Manufacturer: SCM LINVINCIBLE Type: 2200 Planing width: 50 cm Feed height: 20 cm 3-knife cutterhead 2 feed speeds Adjustable jointer fence Adjustable sliding rollers in the planer table Dwedpfez Ef Ifox Alfod Condition: see images, or refer to the item description. Parts can also be picked up on site. All dimensions are approximate. All information is provided to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are an estimate; they may vary depending on the distance and unloading possibilities. The items can be picked up on site or shipped at the buyer's expense. The stated selling price is a net amount plus VAT. An invoice with VAT breakdown is included with the goods. Warranty basis: Due to wear and tear on used parts, the items are generally sold as defective – for spare parts – only to commercial businesses. By submitting his bid, the buyer accepts this as the basis of the purchase contract. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: used, TOS P23 four-sided planer – 250 x 180mm Dedpfx Aoz Niiijlfewd Manufacturer: TOS SVITAVY Model: P23 Max. height: 180mm Max. width: 250mm Adjustable feed rate: 5-40 m/min 8 cutterblocks 2 x bottom 2 x right 2 x left 2 x top Pneumatic roller pressure Robust planer

Condition: used, maximum load weight: 211 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,070 mm, loading space width: 1,080 mm, total width: 1,495 mm, total height: 1,150 mm, A56 GW26GA01430, Product information "STEMA FT 8.5-20-10.1B" incl. jockey wheel and shock absorbers for 100 km/h with confirmation - all players from BSG Chemie Leipzig have signed here; subsequently coated with UV-resistant clear lacquer * Optimum road holding due to stable chassis with safety V-drawbar * Robust rubber spring axle with independent wheel suspension * Maintenance-free compact wheel bearings Dedpfx Alsyqdtujfewd * Solid side walls with double corrosion protection through GALVALUME (aluminum-zinc coating) * Large and stable lashing hooks for securing loads (model-dependent) * Sturdy cast steel toggle-clamp fasteners (model-dependent) * Non-slip, waterproof phenolic plywood floor * All-round protected multifunction lights * Incl. lid Low loader by STEMA, type FT 8.5-20-10.1 with lid, gross weight: 850 kg, overrun braked, lid color: green/white, 100 km/h approval ...and much more. Subject to errors and prior sale.

Year of construction: 2014, condition: like new (used), "EASY PLUS" electronic control from the control panel 2 axes: - Automatic control of the left spindle vertical and horizontal position of the upper spindle. - Selection of the feed speed. - 7 "color LCD display Min.working width (finished size) 25 mm Working width (finished size) 230 mm Min.working height (finished size) 6 mm Working height (finished size) 120 mm Min. Length of a single element 450 mm Variable feed speed controlled by an inverter 5 - 25 m / min Pneumatic pressure of the feed shafts Top feed shaft in front of the planer 3kW feed motor power 5.5 kW planer motor power Vertical spindle motor power (single) 11kW Power of the upper horizontal spindle motor 9kW Spindle speed 6000 rpm. Dwsdpjh Nvt Usfx Alfed Spindle diameter 40 mm Length of the vertical spindles 140 mm Length of the horizontal spindles 250 mm Axial adjustment of the vertical spindles relative to the 40 mm worktable Axial adjustment of the horizontal spindles in relation to the right ruler of 40 mm Min./max. tool diameter on the planer 120 - 140 mm Min./max. tool diameter on vertical spindles 100 - 180 mm Max. Profile on the vertical spindle 40 mm Min./max. tool diameter on the upper spindle 125 (100-180) mm Feed shaft diameter 140 mm Length of the feeding table 2000 mm Quick adjustment of the table at the entrance and 10 mm ruler Manual pump for greasing the STD table

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Planer cutterhead: Tersa Number of knives: 4 Height adjustment: electric Indicator for planing thickness: mechanical counter Feed rate: 7-11-15-19 Infeed roller: steel, segmented Dwedpfx Alshpl T Hofed Pressure bar: segmented Outfeed roller: rubber Table rollers: no Table extension: yes, infeed and outfeed Motor power: 7.5 kW Dust extraction connection: 160 mm Machine length: 1070 mm Machine width: 900 mm Weight: 750 kg

Year of construction: 2001, condition: like new (used), Max. workpiece dimension 220 × 120 mm Min.worked dimension 8 × 5 mm Min. Workpiece length (with pre-planing) 380 mm Max. planing height 10 mm Length of the feeding table 2000 mm Spindle diameter 40 mm Lowering under the table 10 mm The diameter of the planing heads 125 mm Head height 125 × 23 mm Djdpfx Aljih H Ndofewd Profile head spindle height 125 × 130 mm Diameter of the profiling cutter with 2nd and 3rd spindles 120 ÷ 140 mm Diameter of the profiling cutter with 4 spindles 125 ÷ 140 mm Profiling cutter diameter 145 × 12 mm Spindle speed 6000 g / 1 ' Feed speed 8 m / 1 ' Diameter of the feed rollers 140 mm Diameter of 2 extraction nozzles 100 mm The diameter of 2 extraction nozzles is 120 mm Motor power of 1 spindle 5.5 (4) hp (kw) Motor power 2/3 spindle 7.5 (5.5) hp (kw) Motor power 4 spindles 5.5 (4) hp (kw) 3 feed motors 2.25 (1.65) hp (kw) Net weight 1,220 kg Noise level 80-86 db (A)

Condition: new, Working width 530 mm Length of the planing table 3.000 mm Number of knives 4-TERSA St. Motor output 4 kW FIMAL surface planer type PF 530 N ----- NEW MACHINE "Partnership Edition" Technical specifications: ----- Planing table dimensions: 3,000 x 530 mm Feed table length: 1,800 mm Dressing fence dimensions: 1,500 x 175 mm Swivel range stop: 0 - 45 ° 4-knife cutterblock system TERSA d = 120mm: 5,000 rpm Max. Chip removal dressing according to CE: 8 mm Motor 50 Hz., 4 kW / 5,5 PS Sound level according to EN 27960: 82.9 - 88.9 dB (A) Basic equipment: Electrics according to CE standards Magnetic brake Extraction nozzle d = 150mm Bridge protection control panel operated above Original AIGNER aluminum stop with integrated auxiliary stop ----- Special offer from stock: ----- All prices plus VAT / plus Freight and assembly according to expenditure Dodpfx Alsxmk A Hsfswd (Technical information according to the manufacturer - without guarantee!)

Condition: ready for operation (used), Planing machine constant table Planing width max. 605 mm Planing height 2-sided 200 mm Planing height 4-sided 200 mm Feed rate 7 - 9 - 11.5 - 14.0 - 18.0 - 23.0 m/min OPTION: Feed rate up to approx. 50 m/min Motors Planing shaft, lower 7.5 kW Planing shaft, upper 11.0 kW Vertical spindle, right 11.0 kW / D 40 mm Dsdpfx Alswg S Tvofewd Vertical spindle, left 11.0 kW / D 40 mm 5th shaft, horizontal 15.0 kW Feed 2.4 / 3.0 kW Power 1.1 kW Planing shafts with 6 knives For feed rates up to 24 m/min, 3 knives are sufficient 3 knives are in operation, and 3 sharp knives are in reserve Additional unit: 5th working shaft, horizontal, 15 kW Outfeed unit: roller width 350 mm Machine sold in condition A, B, or C A) repaired B) repaired and with new electrical system OPTION Pre-sizing unit at the machine infeed with planing head width 200 mm and motor 3.5 kW

Condition: excellent (used), Year of construction: 1995, operating hours: 1,234 h, functionality: fully functional, 1 GUBISCH - window production line type CENTROMAT-CD-SUPER (output 3 - 4 parts per minute. Number of units to be produced in 8 hours, approx: 200 pieces) with the following machine components: 2 cross-cut saws > 2 cross-cut saws electronically controlled: yes > Number of tools: 1 piece > Spindle speed: 3000 rpm > Tool diameter max.: 350 mm > Motor power: 3 kW 2 left and 2 right vertical slot spindles > Number of tools: 3 pieces > Spindle stroke: 3x100 mm > Spindle speed: 4200 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 3 profiling spindles vertical right > Number of tools: 3 pieces > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW 3 Profiling spindle vertical left > Number of tools: 3 pcs. > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW Dsdpfev A It Sox Alfewd Other features: > Online capable: yes > Double parts package: yes > Screen control: yes Detailed description on request.

Condition: used, Year of construction: 1992, completely shut down used good condition cleaned functionally tested partially overhauled Manufacturer: Martin Type: T 53 Year of manufacture: 1992 Machine no.: V190268 GS-tested for wood dust Control panel at the top Pendulum guard Table edges with low noise Safety cutter block Table adjustment with foot-operated hydraulics Digital display for chip thickness Digital display for groove depth Automatic brake Groove depth adjustment Motor kW: 5.5 Planing width approx. mm: 510 Table length approx. feeding length mm: total 2840 Dust extraction connection D mm: 160 Space requirement approx. L x W x H mm: 2900 x 900 x 1100 Weight approx. kg: 1000 Djdpoz Np I Eefx Alfswd Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty.

Year of construction: 1978, condition: good (used), Weinig U 17N 7-head four-sided planer Planing width: 170 mm Planing height: 120 mm Number of spindles: 7 Dedpfeg Sa R Dox Alfjwd Spindle arrangement: bottom/right/left/right/top/bottom/universal Electric height adjustment Feed rate: 6.5 to 45 m/min Drive for feed rollers: cardan shafts 11 pull rollers from above

Year of construction: 1995, condition: good (used), planing width 220 mm planing height 140 mm Dedpfx Aleg E Uqcsfowd tool diameter max 160 mm 2 x 5.5 kW main engines 3 kW feed motor feed speed 6 - 36 m / min - on the inverter feed on cardan shafts heads supported on both sides electric height adjustment

Year of construction: 1997, condition: excellent (used), max width of the workpiece 23cm max height of the workpiece 18cm Dwodpfxok Dxraj Alfed 1 lower horizontal spindle 2 right vertical spindle 3 left vertical spindle 4 top horizontal spindle heads adjustable up / down, right / left spindle diameter 40mm Hydraulic side feed on the feeding table

Year of construction: 1996, condition: excellent (used), working width 230mm working height 120mm 8 heads Dwjdpfx Alelx Ei Rofsd arrangement of heads: bottom (grooved)/right/left/right/top/top/bottom/universal head adjustment in two axes spindle diameter 40mm smooth adjustment of the feed speed digital displays of working dimensions electric adjustment of the pressure beam, left and upper heads pneumatic clamps of the pulling rollers grooved top

Condition: good (used), Year of construction: 2000, Leadermac LMC 523 Smartmac four side planer - year of production 2000 - DTR - electronic height and width adjustment - possibility to save permanent parameters TECHNICAL PARAMETERS: - planing width 230 mm - planing height 140 mm - diameter of the spindles 40 mm 1 lower spindle 7.5 kW 2 right spindle 5.5 kW 3 left spindle, 5.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW smoothly adjustable feed 3 kW feed motor power electronic height adjustment electronic adjustment of the left head feed on cardan shafts five top steel pull rollers two upper rubber pulling rollers one role in the table top pulling pneumatic material pressure Dodpfeifftxex Alfowd minimum material length 400 mm length of the preliminary table 2000 mm chrome tables stub diameter 5 x 125 mm Machine dimensions 370 x 200 x 190 cm weight ~ 3000 kg