Used Kigo Powder Coating for sale (3,080)

Condition: new, empty load weight: 4,100 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,880 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 131 mm, Equipment: ABS, Frame Central axle steel frame welded construction in lightweight design, optimized for weight, with tipping outriggers and rear tipping shaft; Hitching Tow bar, bent, with height-adjustable heavy-duty screw hitch eye 50 mm Supporting system 1 piece of mechanical support jack with crank on the left side in the direction of travel, 1 piece of step bracket screwed on Axles SAF Intradrum axles with drum brakes, S-cam brake 420/180 mm, Load capacity 9 t/axle, reinforced axle housings, off-road design, automatic brake linkage adjuster Wheels 4 steel rims 11.75 x 22.5, silver Braking system/suspension Two-line compressed air braking system Braking system manufacturer according to factory choice EBS system 2S2M, 2nd axle sensed RSS/RSP stability program Spring brake parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Hose lines laid under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Fgedpfx Ajz R Sx Rjh Eji Tipper body Steel welded construction Fixed steel front wall 4 mm, approx. 980 mm high 2 step brackets inside and 1 on the outside of the front wall Fine-grained special steel floor sheet 5 mm 5 pairs of high-swiveling lashing rings 5 t 1-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, foldable with extended pivot pin locks and spring-assisted lifting mechanism, as well as additionally pivoting Side walls left and right with manual central locking 2 rear corner posts at sideboard height, mounted permanently on the side Steel rear wall 4 mm (HB400), approx. 980 mm high, pivoting with recessed mounting, hooks for metering chains on the rear wall and underside of the body Rear wall lock = automatic pneumatic lock With sealing strips Tarpaulin Plastic roll tarpaulin incl. aluminum tube and hand crank, without customs lock, in the direction of travel on the right horizontal tarpaulin bar rope fastening, tarpaulin overhang approx. 200 mm, front and rear zigzag fastening, tarpaulin overhang approx. 400 mm, stop bracket and locking device for rolled-up roll tarpaulin in the direction of travel on the right, Bracket for hand crank Tarpaulin fastening in the direction of travel on the left with 2 tension straps with rubber pads and tension latches on the underside of the body Tarpaulin color similar to RAL 9006 white aluminum Lighting/electrical system 24-volt lighting system according to ECE regulation R48 2 full-LED multi-chamber taillights "Aspöck" 2 LED position lights at the front 2 LED outline lights at the rear Flashing LED side marker lights, controlled via the turn signal 1 fixed electrical connection cable with 15-pin plug Painting Steel granulate cleaning, multi-layer epoxy zinc phosphate primer and spray painting with 2-component polyurethane topcoat Chassis = RAL 7021 black gray Tipper body incl. front wall = RAL 7021 black gray Side walls = RAL 7001 silver gray Rear corner posts = RAL 7021 black gray Rear wall = RAL 7021 black gray Wheel hubs black = powder-coated Support feet black = powder-coated Lateral underrun protection = factory choice Plastic parts black, unpainted Accessories/General 2 pairs of plastic single-wheel mudguards, with splash protection Fixed aluminum trapezoidal underrun guard, unpainted 2 wheel chocks, with bracket Noise damper = rubber pads Errors and omissions excepted.

Year of construction: 2008, condition: used, Year: 2008 Condition: Functional, dismontled in the warehouse Six-colour sheetfed offset press with coating tower including chambre coater (L) extended unloader (ALV) and carton equipment up to 1,2 mm Technical parameters: - Maximum sheet format: 740x1050 mm - Minimum printing format: 350x500 mm - Maximum speed: 15 000 sheets / hour - Usable materials: cca.60g/m^2 max 1,2mm - High of the stock: - loader 1300 mmm - unloader: 1200 mm - Double diameter impressions and transfer system Basic specification: Loader equipment: - Drive Tronic loader - Sheet splitting with 4 lifting and 6 transporting suction cups (2 of which are long jump suction cups) - Format presetting from the Ergo Tronic controle panel Loading equiment: - Pneumatic traction pads with automatic format adjustment via menu from the Ergo Tronic controle panel Print unit equipment: - Automated plate changing (SAPC) Color wheel equipment: - Color Tronic tinting with 35 zonal blades, each 30mm wide Interpreter equipment: - Powder device WEKO AP 130 Gallery at the machine: - Ergonomic gallery on the device and oparator side Machine equiped: - Equipment for printing cardboard up to 1,2 mm o Manual skid steed loader o Equipment for carton management in printing units o Monitoring the pasage of sheets o Roll down roller shutter for stop-free unloading - Extended unloader / delivery 2600 mm - Full automatic plate changing with pneulatic plate bending device - Machine elevation by 375 mm - ACR Controle(automatic Register) - Connection to the existing Logotronic basic systém (CIP 3) - Connection to the existing Densitronic S console - Color zone status and measured values for Densotronic - Baldwin blankets and impression cylinders washing devices - Combined cooling / temperature controle - Baldwin unit - Grafix dusting with iuonization and connection to the controle panel Fgodpjy H Hgdofx Ah Eji - Infrared and hot air dryers in delivery

Year of construction: 1982, condition: used, Manesty – ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP system to guarantee fast return to production In conjunction with our m-tecTM control system, Oystar Manesty provides a fully validatable Clean in Place (CIP) option. From the initial rinse through to compressed air cleaning of solution tubes, the XLTMCota Clean in Place (CIP) was designed to promote fast return to production by eliminating the need for manual cleaning. Simple and fast loading and unloading facility Tablets can be loaded with the front door closed or open using simple load chutes designed to suit different types of containers. Tablets are discharged by reversing the direction of the drum. This method has been proven to be extremely fast and gentle at the same for safe handling of the finished product. TECHNICAL INFORMATION Weight : 1590 kg Coater Dimensions : H 2065 x W 1665 x D1475 Spray Guns : 3 Working Volume : 170 L Compressed Air Consumption (5bar from Coater) : 7.9 Fodpfx Aezg I T Aeh Esgi Air Volume Range (m3/hr) : 1500 – 2500 Main Heater Temperature Range (°C) : 10 – 85 Main Heater Steam Consumption ( kg/hr ) : 117 Sold with : Donaldson Torit – Dust collector DCE DF02 12R

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300S Dust Extractor with Dust Filters The CORMAK FM300S dust extractor with dust filters is a professional machine designed for the efficient removal of chips, sawdust, and fine dust generated during wood processing. Thanks to its dual filtration system, powerful three-phase motor, and well-designed construction, the FM300S woodworking dust extractor is an ideal solution for both medium-sized and larger production workshops. Main Advantages of the Machine High extraction capacity – 3,900 m³/h – effective operation even with large amounts of contaminants Dust filters included – ensure efficient particle separation and cleaner air 2.2 kW three-phase motor – guarantees continuous and reliable operation Balanced metal impeller – reduces vibration and noise Mobile construction with 4 castor wheels – easy to move even in confined spaces Quick bag fastening system – convenient and fast maintenance 1 x 150 / 3 x 100 mm extraction outlets – enables simultaneous operation with several machines Fodez A T Hqepfx Ah Esgi Construction and Technology The FM300S dust extractor is built on a stable steel frame, powder-coated for improved resistance to industrial conditions. The machine is equipped with a WhirlWind series metal impeller, which provides efficient suction while maintaining a low noise level. The large extraction outlet allows the machine to operate with up to three processing stations simultaneously, significantly increasing the productivity of the workshop. Precision and Operating Efficiency The advanced extraction system combines high negative pressure with efficient filtration of fine particles through integrated dust filters. As a result, the CORMAK FM300S sawdust extractor not only helps keep the work area clean but also contributes to operator health and the reliable operation of woodworking machinery. Applications The FM300S is designed for professional users who require continuous operation with saws, milling machines, planers, and other equipment generating significant amounts of sawdust and wood chips. The dust extractor is ideally suited for: woodworking workshops, furniture manufacturing plants, craft workshops, local dust extraction systems in production lines. Standard Equipment mobile metal base with castor wheels, 2 fabric waste collection bags, 2 dust filters (main filters), Y-shaped extraction connector. Optional Equipment 100 mm extraction hose, galvanized clamps, filter cartridges with filtration efficiency down to 2 microns. Technical Specifications Specification Value Extraction capacity [m³/h] 3,900 Negative pressure 1,750 Pa Noise level 75 dB Bag capacity [l] 150 Number of bags 2 (waste collection) Diameter of extraction outlets [mm] 1 x 150, 3 x 100 Dimensions (L x W x H) [mm] 1,400 x 570 x 1,960 Weight [kg] 64 Motor power [kW] 2.2 Power supply 400 V / 3-phase User and Maintenance Manual (DTR) YES CE Declaration of Conformity YES

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 747 kg, maximum load weight: 1,953 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 170 2700 2, Rear Tipper + Enclosed Leaf Grid 60cm NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Loading platform height: 66cm Total weight: 2700Kg Payload: 2073Kg Braked tandem axle trailer Overrun brake and handbrake by KNOTT 2x 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning closure Can be folded down and removed on all sides Enclosed leaf grid 60cm made of hot-dip galvanized steel Also can be opened and removed on 4 sides 15mm thick, non-slip, and robust screen-printed wood floor Additional steel plate on the wood floor Automatic support wheel with 400Kg support load 6 noise-reducing lashing eyes with 800Kg tensile force Reinforced 13" C-tire with steel valve M+S tires Net/rope hook on the frame 13-pole connector LED marker lights at the front Lights at the rear with reversing light and triangular reflector Upper frame mounted on rubber pads Large tilting angle of 51 degrees rearwards Hand pump with adjustable handle OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION STARTING FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) Fgsdpez A T Uhjfx Ah Eoi -Spare wheel with holder -Without side boards (price reduction) -Side board height increased to 35cm -Black Edition (Powder-coated side boards and rims in black) -Integrated ramp rails 2800Kg -Electric tilting operation -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on the tilted vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also enclosed -Extension side boards 30cm with tensioning closure -Flat cover with or without bows -High cover 160cm or 180cm Further accessories available upon request! Plus shipping to Gera and vehicle registration document 200 € net. Pictures are examples and may show optional accessories that incur extra costs. Haven't found the right trailer yet? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all kinds of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230 Dust Extractor with Dust Filter The CORMAK FM230 with a dust filter is a compact, mobile, professional-grade dust extractor designed for the efficient removal of wood chips, dust, and sawdust in woodworking workshops. Thanks to the use of a dust filter, the machine provides not only high suction performance but also improved filtration efficiency, significantly enhancing air quality in the workplace. Main Advantages of the Machine Extraction capacity of 1,000 m³/h – ideal for use with low- and medium-powered woodworking machines. Dust filter – effectively captures small particles, including fine sanding dust. 0.75 kW / 230 V motor – quiet, energy-efficient operation without the need for a three-phase power connection. Mobility – four castor wheels allow the extractor to be easily moved around the workshop. Compact design – the machine takes up little space, making it an ideal choice for small workshops. Construction and Technology The machine is equipped with a metal sawdust fan, ensuring a long service life and reliable operation. The high-quality dust filter efficiently separates dust particles from the airflow, helping to reduce airborne dust in the workshop. The robust powder-coated housing protects the internal mechanisms, while the sealed suction system prevents pressure losses. Precision and Operating Efficiency The CORMAK FM230 woodworking dust extractor provides stable and consistent suction. An extraction capacity of 1,000 m³/h combined with a low-power motor enables efficient operation with a single woodworking machine without interrupting the work process. Thanks to its fine-particle filter, it is also an excellent dust extractor for fine dust generated during wood sanding. Applications Small and medium-sized woodworking workshops Craft and production facilities Technical schools and educational workshops Hobby woodworking workshops The FM230 is ideally suited for use with: milling machines, planers, jointers, belt sanders, Fgodez A Ut Eepfx Ah Eei thickness planers. Standard Equipment Dust filter Waste collection bag Castor wheels with brakes Bag fastening clamp Optional Equipment Ø100 mm extraction hose Suction outlet reducers Additional set of filter bags Technical Specifications Specification Value Motor power 0.75 kW Extraction capacity [m³/h] 1,000 Negative pressure 1,800 Pa Noise level 70 dB Negative pressure 1,020 Pa Noise level 70 dB Bag capacity 60 l Number of bags 2 (filter + waste collection) Extraction outlet diameter 100 mm Dimensions (H x W x L) 1,500 × 420 × 600 mm Power supply 230 V Weight 27 kg

Condition: new, maximum load weight: 35,800 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Fgedpfx Ahoz Dmnwe Eji Excerpt from the equipment. Complete equipment available upon request. Chassis, gooseneck: Special steel frame made of high-strength fine-grain steels, electrically welded at the connection points, well-dimensioned outer frame. 3-axle arrangement. Wheel arch above the axles with spray mist suppression. All steel parts sandblasted. Lateral impact protection made of anodized aluminum mounted. Increased point load of approx. 30,000 kg over approx. 5,000 mm. Special design in the gooseneck area for maximum possible low-bed length in combination with the AluLeg outrigger supports, instead of telescopic outrigger winches, max. rear pivoting radius of the semi-trailer tractor unit 2,100 mm. Special superstructure with rear girder widening: DINKEL - special superstructure. Self-supporting aluminum roof beam / profile approx. 100 x 100 mm, sliding tarpaulin with plastic flaps. Rear girders can be widened to approx. 4,200 mm (only for loading and unloading). Three sliding girders per side with rubber strap relief. Additional center girder locking in the roof beam and parking position, by means of a pull cable and spring latch. DINKEL - lifting roof, mechanically height-adjustable. Lifting roof height approx. 400 mm, operable on both sides or on one side. Without opening the opposite side and the doors. Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with height adjustment in the girders. Front cover on the front wall for operation under a tarpaulin up to a total height of 4,400 mm. Four rows of stackable approx. 150 mm aluminum slats on the side, with 450 mm pockets at the bottom, above 4 rows of individual pockets. In the upper bed, only 3 rows of insert slats. Evenly distributed spacing. Floor: approx. 27 mm special water-resistant glued beech - screen-printing panels, rough surface. Steel sheet in the wheel arch area. Forklift-compatible according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking/release safety valve). Spring brake cylinders as parking brake. Wabco Smart Board with odometer and unit load display. Including WABCO tire pressure monitoring system. Axles: 3 x 10,000 kg SAF/Sauer with drum brakes in a low-bed design. Air suspension with lifting and lowering device, total stroke approx. 230 mm. Third axle as a friction-controlled trailing axle with electric and mechanical lock. Twin tires: 235/75 R 17.5, -12-ply. Premium brand of our choice, including E-wheel chocks. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, top. Painting: Chassis with superstructure in RAL color of your choice. Center girders, axles powder-coated black. Corner girders in hot-dip galvanized design. Plastic parts black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment including: - E-supply line 15-pin - Air suspension in ECAS design, operation on the semi-trailer - Overwidth signs front and rear in galvanized, steplessly telescopic design with attached marker lights including sockets for flashing beacons (small signs) - Center girders with additional roof beam locking, by means of a pull cable - operation from below - Sliding tarpaulin support unlocking also from

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us. Fedpozyc Riefx Ah Ejgi

Condition: used, Year of construction: 2026, New demonstration machine! General technical features: - Control: 7.0" touchscreen ConnectTouch control - Cutting height and cutting angle electronically controlled, digital input of cutting height and angle (controlled positioning of the motorized axes) and movement of the motorized axes in hold mode (axis movement via push button); display resolution: 0.1 mm or 0.01°; repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron, table extension as standard across the entire table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite structure, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm, main saw blade ø 30 mm with additional holes, scoring saw ø 36 mm, tool cutting width max. 20.0 mm for machines with single-sided tilting, 6 mm for machines with double-sided tilting; saw blades up to 350 mm can be lowered under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool tilt: 0° to + 47°, tilting only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / saw blade ø 450 mm; T7710/1: +45°: 106 mm / ø 450 mm; T7710/2: +45°: 104 mm / ø 450 mm; -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, due to its design, the motor can be overloaded several times its rated power for a short period of time and thus offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is rotatably mounted around its vertical axis. In addition, it can be swiveled to the right, so that larger components can also be processed easily - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stop elements; dimension display via scale with magnifying glass; cutting length 95 - 2000 mm, extendable up to 3220 mm - Cross table: Made of powder-coated steel, workpiece support in anodized aluminum, two sliding supports for extending the support area; length stop can be placed in the front and rear position without lifting; one-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating, Cast iron: Table surface finely milled, Aluminum: Aluminum components anodized - Protective cover / extraction: Height-adjustable protective cover incl. interchangeable rear part for miter cuts; protective cover for saw blades up to ø 450 mm (optionally 550 mm); extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; total extraction connection Ø 140 mm; minimum air volume: Vmin 18.5 m3/min at 20 m/s, negative pressure 1,400 Pa - Electrical equipment: Contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (control panel, stand) Fjdpfxjz A Hh Uo Ah Eegi

Year of construction: 2012, condition: used, film width: 450 mm, roll width: 500 mm, machine/vehicle number: BA-18609, Equipment: CE marking, Coating Line Used for coating of battery electrodes - Roll width 500 mm - max. Web width 450 mm - max. Coating width 400 mm - Web speed 0.1-5 m/min - Various substrate films such as copper, aluminium, PET and PES - Doctor blade & slot die coating - Web guide system - Corona pre-treatment - integrated x-Ray areal weight measurement Fsdpozzpqrefx Ah Esgi - 1x infrared oven - 2x convection oven Length coater: 14 m The buyer is responsible for the proper disassembly and pickup of the machinery.

Condition: used, “FED” Drum Coater Fsdpsz Har Ijfx Ah Eogi Type Crumb breader for dry coatings all stainless steel belt width 400 mm adjustable speed min. 300 gr coating material adjustable angle fom 0 to 8° overall dimensions (L x W x H) : ± 4.400 x 1.450 x 1.800 mm infeed belt belt width 300 mm Elevating spiral screw

Condition: used, functionality: fully functional, machine/vehicle number: WD210844A, Year of construction: 2023, operating hours: 385 h, lifting height: 3,040 mm, fuel type: diesel, mast type: simplex, construction height: 2,385 mm, power: 18 kW (24.47 HP), fork carriage width: 1,300 mm, fork length: 1,600 mm, empty load weight: 2,090 kg, total length: 2,918 mm, drive type: Diesel, construction width: 2,260 mm, Reach truck Chassis number: WD210844A Fgede Aat D Rjpfx Ah Esi Load center: 600 Fork width: 170 mm Fork thickness: 55 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 23x8.5-12 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 23x8.5-12 Rear tire condition: 80 - 100% Description: The unit has been visually and technically refurbished. Maintenance including engine and drive oil has been performed. UVV inspection has been renewed. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, CE certificate, interior mirror, Folding warning lights, special paint in gray. The forklift is primed, phosphated, and powder-coated. Hood, tailgate, lifting mechanism, driver protection, and attachments are painted in RAL 7016 anthracite gray.

Condition: used, all stainless steel Fgede Aa Rkujpfx Ah Esi belt width 400 mm mobile adjustable speed filling capacity 27 L weight: 390 kg dimensions (l x w x h): ± 2.860 x 750 x 1.450 mm With adjustable take-over outfeed conveyor

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 16, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-16 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-16 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -16 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 254 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 15 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 14 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 10 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-16 RACK - User’s Manual - Assembly Instructions - Rating plate Fjdpfohbduzsx Ah Eegi - 12 months’ warranty We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2027, functionality: fully functional, cooling capacity: 12 kW (16.32 HP), High-quality air-to-water heat pump. This unit is characterized by its extremely quiet and efficient operation, and the use of a future-proof, natural refrigerant. • Natural refrigerant R290 (propane): Extremely environmentally friendly with a minimal GWP of 3. Absolutely future-proof and compliant with strict F-gas regulations. • Inverter technology: Equipped with a continuously variable BLDC rotary compressor. The output is flexibly adapted to the actual demand. • High supply temperatures: Effortlessly provides outlet temperatures of up to 70 °C – ideal for heating, cooling, and hygienic hot water preparation. • Robust design: Self-supporting, galvanized steel frame with weather-resistant polyester powder coating (RAL 7037PB) and sound-insulated compressor compartment. • Type: Air-to-water heat pump (outdoor installation) • Cooling capacity (A2): 12.0 kW • Refrigerant: R290 (propane, 3.30 kg filling quantity) • Voltage supply: 3 / 400 V / 50 Hz • Dimensions (LxWxH): 2076 x 712 x 1353 mm • Net weight: 387 kg • Hydraulic connection: G 1.1/2" Fsdpfsr D R Thsx Ah Ejgi Ordered ex works and precisely tailored to the desired application.

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 m weight of the machine ca. 200 kg dimensions of the machine ca. 1,9 x 0,81 x 0,86 m For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Fjdpfx Aogvqz Ish Eogi Container volume: approx. 600 l

Condition: used, • Length 2000 mm • Width 800 mm • Height 1000 mm • Blue/Black powder-coated • Price €125 Fgsdpfx Ajw E Ezdeh Esi

Condition: excellent (used), roll diameter: 50 mm, roll width: 310 mm, Knapp roller conveyor curve, 90° reversing roller row/ct2167 Manufacturer: KNAPP Track width: 315mm / total width: 385 mm Inner curve length: 1390 mm Outer curve length: 1930 mm Roller material: Steel Roller diameter 50 mm Bearing steel rollers Powder-coated, perforated steel frame Guide rail, belt drive SEW Eurodrive drive. Fgodswyut Espfx Ah Eoi Power: 0.25kW, speed: 39m/min

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM470 Dust Collector is a high-performance industrial sawdust extraction system designed for large woodworking workshops and industrial production facilities. Equipped with a robust construction and a multi-fan extraction system, it delivers maximum efficiency and reliability in demanding working conditions. Key Features Impressive airflow capacity of 6,800 m³/h – provides efficient extraction of sawdust and wood chips from multiple workstations simultaneously. 5.6 kW motor – three-phase 400 V power supply ensures stable and reliable continuous operation. Balanced metal impeller – guarantees smooth, quiet, and vibration-free performance. Large collection capacity with 8 × 200 L bags – reduces emptying frequency and enables uninterrupted operation. Heavy-duty steel construction – powder-coated housing provides excellent resistance to mechanical damage and corrosion. Construction and Technology The CORMAK FM470 woodworking dust collector is equipped with a durable steel fan featuring a precisely balanced impeller, ensuring stable airflow and long service life. The housing is manufactured from thick steel profiles, protecting the unit against mechanical damage and demanding workshop conditions. The bag mounting system with clamps and fastening rings allows quick installation and replacement of large fabric filter bags. The design also provides easy access for maintenance and servicing. Precision and Performance The high efficiency of the FM470 dust extraction system results from optimized fan geometry and a large filtration surface area provided by the collection bags. Stable airflow ensures effective removal of dust and chips, improving machine performance, workplace cleanliness, and operator comfort. Applications The FM470 is ideal for: Industrial woodworking and furniture manufacturing plants – extraction of chips from routers, planers, saws, and thickness planers. Factories and production halls requiring clean air and high-capacity dust extraction. Technical schools and educational workshops – providing a safer working environment. Fodpfx Ahovu Ryrs Esgi Mobile and central dust extraction systems – serving as a powerful industrial sawdust collector. Standard Equipment 8 fabric filter bags (200 L each) Bag mounting system (clamps and fastening rings) Optional Equipment Ø100 mm extraction hose Galvanized hose clamp Technical Specifications Specification Value Extraction capacity 6,800 m³/h Collection bag capacity 8 × 200 L Number of bags 8 Extraction inlet 1 × Ø180 mm, 4 × Ø100 mm Overall dimensions (L × W × H) 3,560 × 580 × 2,200 mm Weight 152 kg Motor power 5.6 kW Power supply 3-phase, 400 V

Condition: new, Year of construction: 2027, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye Fgjdpfsvv Rfkex Ah Eei CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, The AL-KO CLEAN VAC central vacuum units are the ideal solution for direct extraction from handheld processing machines and as central vacuums for cleaning entire workshop or production areas. Wherever high suction power is required or long piping runs need to be bridged, AL-KO CLEAN VAC units are the perfect solution. Applications: - Extraction for handheld processing machines, e.g. in joineries, grinding shops, training workshops - Cleaning vacuuming of floors and machines in workshops, production areas or warehouses - Direct extraction at small diameters such as filling stations, dosing systems, etc. Advantages: - High suction power up to 25,000 Pa negative pressure - Perfect plug & play: fully pre-assembled at the factory. Fully operational after connecting power and compressed air - 100% air recirculation via M-class dust filters (residual dust < 0.1 mg/m3) with optional H13/H14 post-filter stage Fedpfowwt Aaox Ah Eogi - Attractive appearance and additionally weatherproof - Low-noise operation thanks to sound-insulated and powder-coated housing - Easy handling: set up, connect, immediately ready for operation at the customer’s site

Condition: new, working width 1200 mm weight 350 kg dimensions 1200 x 1500 x 750 mm Bucket width approx. 1200 mm Bucket depth approx. 1500 mm Bucket height approx. 750 mm Entry pockets 70 mm x 180 mm Weight approx. 350 kg Capacity approx. 900 liters Made in Germany, powder-coated Fgedox Dc U Ajpfx Ah Esi

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,515 mm, A18 GW26M0151130 Refrigerated box trailer, manufacturer: Unsinn, UKT 6°C 2513-13-14, 2500x1350x1900mm, cooling unit: CIBIN, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg... and much more. Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics. Axles (for braked version): AL-KO brake system. Fgsdeyn Uc Ijpfx Ah Eoi Body: Thermo-sandwich construction * Inner and outer panels made of galvanized and powder-coated steel sheet for heavy-duty use * Insulation: PU core * Rear door: double-leaf, with aluminum hinges * Refrigeration compartment lever lock and stainless steel door retainer * Rear frame and edging profiles made of special anodized aluminium profiles for an attractive appearance * 3-sided all-round impact protection Subject to errors and prior sale.

Condition: new, functionality: fully functional, Year of construction: 2024, total height: 1,240 mm, WKS003 Tool cabinet set for bending with five vertical pull-outs of 180mm each Dimensions: W=1040mm, D=1300mm, H=1240mm Two-colour powder-coated (Trumpf) Housing: gentian blue structure (RAL5010) Pull-outs: white structure (RAL9002) Payload of 900 kg per pull-out Fedpfxeur Itmo Ah Eegi Product code: 94032080 manufactured: DE/08 Weight: 445 kg net (475 kg gross) Pre-assembled as a set for approx. 33 running metres of press brake tools. Max payload 900 Kg for each drawer

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 475 kg, total length: 1,300 mm, total width: 1,040 mm, total height: 1,240 mm, number of drawers: 5, Directly from the manufacturer, the original from the patent holder Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing: black-grey structure (RAL 7021) Pull-outs : black-grey structure (RAL 7021) Payload per pull-out 900 kg Product code: 94032080 Swiss commodity code: 9403.2010 Fgjdpfx Ajuuamwjh Eoi Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 running meters of press brake tools completely assembled. Available in various sizes and with many accessories!