KBA RAPIDA 105-6+L ALV CX

Year of construction

2008

Condition

Used

Location

Čestlice

Machine data

Machine type:: KBA RAPIDA 105-6+L ALV CX

Year of construction:: 2008

Condition:: used

Price & Location

Location:: Čestlice, Czech Republic

Call

Details about the offer

Listing ID:: A21816483

Reference number:: 4008

Update:: 11.05.2026

Description

Year: 2008

Condition: Funkcional, dismontled in the warehouse

Six-colour sheetfed offset press with coating tower including chambre coater (L) extended unloader (ALV) and carton equipment up to 1,2 mm

Technical parameters:

- Maximum sheet format: 740x1050 mm
- Minimum printing format: 350x500 mm
- Maximum speed: 15 000 sheets / hour
- Usable materials: cca.60g/m^2 max 1,2mm
- High of the stock:
- loader 1300 mmm
- unloader: 1200 mm
- Double diameter impressions and transfer system

Basic specification:

Loader equipment:

- Drive Tronic loader
- Sheet splitting with 4 lifting and 6 transporting suction cups (2 of which are long jump suction cups)
- Format presetting from the Ergo Tronic controle panel

Loading equiment:

- Pneumatic traction pads with automatic format adjustment via menu from the Ergo Tronic controle panel

Print unit equipment:

- Automated plate changing (SAPC)

Color wheel equipment:

- Color Tronic tinting with 35 zonal blades, each 30mm wide

Interpreter equipment:

- Powder device WEKO AP 130

Gallery at the machine:

- Ergonomic gallery on the device and oparator side

Machine equiped:

- Equipment for printing cardboard up to 1,2 mm

o Manual skid steed loader

o Equipment for carton management in printing units

o Monitoring the pasage of sheets

o Roll down roller shutter for stop-free unloading

- Extended unloader / delivery 2600 mm
- Full automatic plate changing with pneulatic plate bending device
Dedpfxjy H Hgdo Albekt
- Machine elevation by 375 mm
- ACR Controle(automatic Register)
- Connection to the existing Logotronic basic systém (CIP 3)
- Connection to the existing Densitronic S console
- Color zone status and measured values for Densotronic
- Baldwin blankets and impression cylinders washing devices
- Combined cooling / temperature controle - Baldwin unit
- Grafix dusting with iuonization and connection to the controle panel
- Infrared and hot air dryers in delivery

Seller

Registered since: 2018

53 listings online

Call

Send inquiry

Telephone & Fax

+420 311 ... show

+420 222 ... show

Fax:

These listings may also fit your interest.

Auction

Digital print machine Canon DreamLabo 5000 (2015-3)

Sachsen-Anhalt

18,251 km

Digital print machine
CanonDreamLabo 5000 (2015-3)

€2,500

To the auction

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Dkodpfx Alozx E N Sjbot Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

See details

Listing

Filderstadt

18,618 km

Imagesetter
Heidelberg105

Call

Auction

Digital print machine Canon DreamLabo 5000 (2015-7)

Sachsen-Anhalt

18,251 km

Digital print machine
CanonDreamLabo 5000 (2015-7)

€2,500

To the auction

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Djdpfx Aozx E Axslbskt Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

See details

Auction

Saddle stitcher Heidelberg Stitchmaster ST 450

Gelderland

18,552 km

Saddle stitcher
HeidelbergStitchmaster ST 450

€10,000

To the auction

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,812 h, functionality: fully functional, product width (max.): 480 mm, product height (max.): 12 mm, product length (max.): 320 mm, TECHNICAL DETAILS Performance (cycles/hour) Speed: max. 14,000/h Wrapping speed: max. 14,000/h Pre-folding: max. 12,000/h Piston opening: max. 12,000/h Offset stitching: max. 12,000/h Dodpfxszw Ak Rj Albokt Dimensions – Width × Spine Length Uncut: max. 320 × 480 mm Uncut: min. 85 × 128 mm Single-up Cut: max. 315 × 475 mm Minimum cut size: 80 × 120 mm Double-up Uncut: min. 85 × 210 mm Trim mark Cut: min. 2 × 64 × 100 mm Product height (compressed) 3-knife cut: max. 12 mm Middle cut as trimming cut: 10 mm Middle cut as punching cut (half punching width): max. 6 mm Triple cut as trimming cut: 5 mm MACHINE DETAILS Operating hours (according to counter): 14,812 h EQUIPMENT 1 CHU feeder 2 DVU vertical feeders 2 DHU horizontal feeders 1 Stitchmaster three-knife cutting machine with middle cut 2 knife sets 4 stitching heads CHA forklift Note: Further technical details can be found in the attached document.

See details

Listing

Schwalmtal

18,594 km

Palletizer
QTMUNIPAL

Call

Condition: new, functionality: fully functional, input voltage: 230 V, Cobot palletising solution - Relieves employees from heavy lifting and monotonous physical strain - System can be configured and adapted to individual requirements - Requires less floor space than conventional palletising solutions (dimensions: 2,650 x 1,600 mm) - No stationary safety technology required, making UNIPAL easy and flexible to use - Dashboard for process overview - Up to 22 kg payload and 2,200 mm palletising height Dodpfx Asrbz Rxelbekt - Fast and easy retooling - Plug-and-play (requires 230 V mains supply) and 6 bar compressed air

See details

Auction

Depaneling system for printed circuit boards ASYS Divisio 3100 Inline

Hessen

18,516 km

Depaneling system for printed circuit boards
ASYSDivisio 3100 Inline

€40,000

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg Djdezvb I Eepfx Albskt EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

See details

Auction

Sachsen

18,251 km

Facing lathe
SeigerRecord L / CG4

€9,900

To the auction

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 1,800 mm, turning length: 600 mm, spindle bore: 130 mm, spindle speed (max.): 400 rpm, controller model: Siemens 840D Powerline, TECHNICAL DETAILS Turning diameter: 1,800 mm Turning length: 600 mm Dksdpfx Aszv Rlgjlbjt Spindle bore: 130 mm Spindle nose: DIN 55027, size 11 Speed range: 1–400 rpm MACHINE DETAILS Control system: Siemens 840D Powerline Total power requirement: 38 / 52 kW Dimensions & Weight Machine weight: approx. 25 t Transport width: 3,700 mm EQUIPMENT 6-jaw chuck

See details

Listing

Saddle stitcher with feeder and trimmer MÜLLER MARTINI Prima Plus

Helmstedt

18,281 km

Saddle stitcher with feeder and trimmer
MÜLLER MARTINIPrima Plus

Call

Year of construction: 2007, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Standards: · Standard accessories Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer Dkedpomn Sk Nefx Albet · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

See details

Auction

Plasma cutting machine MicroStep MasterCut Compact 6001.20P

Baden-Württemberg

18,685 km

Plasma cutting machine
MicroStepMasterCut Compact 6001.20P

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm Dedpjzv N Hpofx Albjkt MACHINE DETAILS Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Dust extraction system: Donaldson Torit DCE

See details

Auction

Vertical turning lathe Webster & Bennett EVOLUTION R 48R

Région wallonne

18,651 km

Vertical turning lathe
Webster & BennettEVOLUTION R 48R

€25,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, controller model: Siemens 840 D, table diameter: 1,220 mm, TECHNICAL DETAILS Table diameter: 1,220 mm Max. turning diameter: 1,500 mm Max. height under the cross beam: 900/1,200 mm Saddle travel, X-axis: 1,000 mm Table speed range: 4.5 to 100 RPM Feed rate range: 0.127 to 6.35 mm/rev Tool changer: 30 positions MACHINE DETAILS Control system: Siemens 840 D Main drive motor: 41 kW EQUIPMENT 8 clamping jaws 30 tool holders Dsdpfxezuy Eae Albokt Full enclosure Mist extraction system

See details

Listing

Helmstedt

18,281 km

Stack lift
Polar MohrL 600-G-3

Call

Auction

Laser cutting machine TRUMPF TruLaser 3030 Lean Edition

Rheinland-Pfalz

18,597 km

Laser cutting machine
TRUMPFTruLaser 3030 Lean Edition

€10,500

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 35,623 h, machine/vehicle number: A1225A0041 / L20, controller model: SINUMERIK 840D SL, laser power: 3,200 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, The machine was exclusively serviced by Trumpf until 2023 as part of a maintenance contract. TECHNICAL DETAILS Working length: 3,000 mm Working width: 1,500 mm Working height: 115 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 115 mm Maximum workpiece weight: 900 kg Sheet thickness steel max.: 20 mm Sheet thickness stainless steel max.: 12 mm Sheet thickness aluminum max.: 8 mm Sheet thickness max.: 20 mm Djdpfx Ajzyakgelbskt Feed rate X-axis: 100 m/min Feed rate Y-axis: 200 m/min Feed rate Z-axis: 80 m/min Cutting speed: 140 mm/min Positioning speed X/Y-axis: 140 m/min Repeat accuracy: 0.05 mm Smallest programmable step: 0.001 mm MACHINE DETAILS Laser type: CO₂ laser Laser source manufacturer: Trumpf Laser source model: TruFlow 3200 Laser power: 3,200 W Laser wavelength: 10,600 nm Cooling type: Water Control type: CNC control Control manufacturer: Siemens Control model: SINUMERIK 840D SL Automation level: Semi-automatic Operating type: Electric Input voltage: 400 V Input current: 100 A Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 6,500 x 7,600 x 2,200 mm Total weight: 12,000 kg Laser hours NC control: 35,623 h Laser hours resonator / pump 1: 34,258 h Laser hours beam on / pump 2: 10,155 h EQUIPMENT CE marking Central lubrication system Cooling unit Documentation / manual Dust extraction Emergency stop switch Safety light curtain

See details

Auction

Hessen

18,524 km

Telescopic work platform
Up-RightAB 38

€4,600

To the auction

Condition: used, Year of construction: 2001, lifting height: 11,500 mm, TECHNICAL DETAILS Platform height: max. 11.50 m Number of people: max. 2 Weight of people: 215 kg Weight of materials: 55 kg The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. Dkjdpfx Aezwpd Relbot If the item is not collected on time, a storage fee of €20.00 per lot and for each day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the item on-site before the end of the auction.

See details

Listing

Tørring

18,061 km

Perfect binder
Horizon BQBQ 470

Call

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Equipment: clamp, Offer without obligations. Horizon BQ 470 Perfect Binder Year: 2018 Total counter: 600.000 Touch screen control panel Dkjdozc El Nspfx Albjt 4 clamps Hand feed station Milling head Spine glue length Cover nipping unit Milling and roughing Delivery Conveyor EVA glue tank Max. book size: 320 x 320mm Min. book size: 145 x 105mm Max. open cover size: 320 x 660mm Min. open cover size: 135 x 225mm Max. book thickness: 0.3 to 65mm Max. mechanical speed: 1,350 cycles/hr Machine is no longer in production. Available immediately. Horizon HT-30C On Demand Three Side Trimmer Serial: Counter: 600.000 Technical details Untrimmed book size Max. 320 x 235 mm (12.600" x 9.255"), Min. 200 x 134 mm (7.870" x 5.280"), Trimmed book size, Max. 305 x 230 mm (12.010" x 9.055"), Min. 200 x 134 mm (7.870" x 5.280"), Available immediately. Excellent condition - Located: Denmark Available:Immediately Price under request

See details

Auction

Hessen

18,524 km

Manual stacker
2x JungheinrichEPL 110

€800

To the auction

Condition: used, machine/vehicle number: 425130268, Year of construction: 2016, operating hours: 813 h, load capacity: 1,000 kg, fork length: 1,150 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Auction of two Jungheinrich EPL 110 (manufactured in 2016 & 2015) The 2015 unit is defective and will be sold as a source of spare parts! TECHNICAL DETAILS Lifting capacity: 1,000 kg Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 85 Ah Dimensions & Weight Dimensions (L x W x H): 1,600 x 800 x 1,940 mm Self-weight: 500 kg Serial number, unit 1: 425130268 Operating hours, unit 1: 813 h UVV certificate, unit 1: 04/2026 EQUIPMENT Integrated battery charger The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends. Dkedjzwpctspfx Albot

See details

Advertise here