Used Kempi Minarc 150 for sale (9,950)

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2205882, warranty duration: 12 months, Equipment: documentation/manual, GEM 520 CARTON SEALER WITH SIDE DRIVE BELTS FOR UNIFORM CARTON SIZES CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ - Width: min. 100 mm - max. 520 mm - Height: min. 100 mm - max. 520 mm TECHNICAL DATA: - Drive & guide belts: vertical - Carton size adjustment: manual - Sealing unit: bottom & top - Standard version: T22 / T23 - Tape width: from 38 to 50 mm depending on unit - Adjustable tension - Max. tape roll diameter: 360 mm - Tape roll core: 76 mm - Power supply: 400V, 3-phase, N, PE - 50/60 Hz - Consumption: 0.25 kW - Protection rating: IP 54 - Working environment: +5°C to max. +35°C - Conveyor speed: 22 m/min Kdedjz Dwfmjpfx Ah Eot - Average output: 1,000 cartons/hour - Working height: 650 mm - Weight: 144 kg - Machine dimensions (L x W x H): 1,170 x 880 x 1,450 mm The illustration may show options subject to a surcharge.

Condition: used, Year of construction: 2013, Year of manufacture: 2013 240 V, IP 65 Operating pressure: 6-8 bar Kdodszrglzjpfx Ah Eot

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY VC 650/150 Tech injection molding machine ENGEL ERC 13/1-F robot – SET 1 Year of manufacture: 2005 Clamping unit design: ENGEL tie-bar-less Clamping force: 1,500 kN / 150 t Control system: ENGEL CC200 – color touchscreen Injection unit: 650 Screw diameter: Ø45 mm Screw stroke: 200 mm Screw L/D ratio: 20 Injection volume: 318 cm³ Injection shot weight: approx. 290 g PS Maximum injection pressure: 2,040 bar Maximum screw speed: approx. 315 rpm Maximum injection flow rate: approx. 179 cm³/s Mold opening stroke: approx. 500 mm* Maximum distance between platens: approx. 700 mm* Nozzle stroke: 350 mm Nozzle clamping force: 67 kN Cylinder heating power: approx. 13.3 kW Number of heating zones including nozzle: 5 Kdsdpjzxqycefx Ah Est Hopper capacity: approx. 80 l Machine weight: 9,500 kg Robot: ENGEL ERC 13/1-F Robot manufacturer: ENGEL Robot year of manufacture: 2005

Condition: excellent (used), functionality: fully functional, Used Maguire plastic drying units are for sale. This listing includes a total of 13 units, with the option to purchase individual units or a larger package. Available are Low Pressure Dryer and Vacuum Batch Dryer / vertical dryer models. Condition as shown in the photos. Price depends on the selected unit and quantity. These dryers are designed for drying plastic granules. The units are used, and their technical and visual condition corresponds to the photos. Additional photos of a specific dryer can be provided upon request. Available units: No. Designation Type / model as shown in the photos 1 D067 Maguire Low Pressure Dryer, model LPD2HE4 2 D049 Maguire Low Pressure Dryer, model LPD1HE4 3 D084 Maguire Low Pressure Dryer 4 D099 Maguire Low Pressure Dryer, model LPD1HE4 Kjdpjzc D Ebofx Ah Eodt 5 D054 Maguire Low Pressure Dryer, model LPD1HE4 6 D051 Maguire Low Pressure Dryer, model LPD1HE4 7 D065 Maguire Low Pressure Dryer, model LPD1HE4 8 D071 Maguire Low Pressure Dryer, model LPD1HE4 9 D068 Maguire Low Pressure Dryer, model LPD2HE4 10 D076 Maguire Vacuum Batch Dryer, model VBD-150 11 D081 Maguire Vacuum Batch Dryer, model VB-150 12 D089 Maguire Vacuum Batch Dryer, model VB-150 13 D091 Maguire Vacuum Batch Dryer, model VB-150

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 04058-00, control type: CNC control, actuation type: hydraulic, controller model: CNC 5000, working width: 1,250 mm, operating speed: 250 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 25 A, type of input current: three-phase, Equipment: CE marking, emergency stop, ORNS Twin-Pro 150 G – Year of manufacture 2015 – Ready for immediate use For sale is a well-maintained JORNS Twin-Pro 150 G from the year 2015. The machine is in good technical and visual condition and is fully functional. The system is ideally suited for the economical production of roof and facade profiles as well as sophisticated edge profiles. Technical data: Manufacturer: JORNS Kodezmfibepfx Ah Eodt Type: Twin-Pro-150G-RH-UV-SLE-1150-CP100-6.4-mp Year of manufacture: 2015 Serial number: K14044 Control: CP100 Working depth: 1,150 mm Usable length: 6,400 mm Steel: up to 1.5 mm Aluminum: up to 2.5 mm Special features: Good condition Available immediately Ideal for sheet metal workers, roofers, and facade companies The machine can be inspected by appointment. We look forward to your inquiry for further information.

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. Kjdev S Synopfx Ah Eedt No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: good (used), Year of construction: 2006, machine/vehicle number: 91426, Offer 25227 Technical specifications: - Pressing force: 150 t - Working width: 3600 mm - Clearance between uprights: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustable backgauge range: 120 mm - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 3850 x H 2300 x D 1600 mm - Weight: approx. 8700 kg Includes: - Swivel arm – operator panel with ATL 550 control - For pressing depth & backgauge - Motorized backgauge - Crowning device - FIESSLER Lasersafe - 4-way universal die, segmented punch tool & “gooseneck” die - Two-hand operation desk, foot pedal, Kedpfxswvih Nj Ah Eedt

Condition: good (used), Year of construction: 1994, Pressure: 315 t Stroke: 20-150 mm Adjustable ram stroke min./max.: 20 - 150 mm Ksdpoz Dvvwofx Ah Eodt Table size: 1780 x 1250 mm Ram area: 1500 x 1000 mm Total power requirement: 75 kW Machine weight approx.: 46 t Additional information: - Installation height with max. stroke, adjustment at the bottom, installation at the top: 00 mm - Table opening: 1200 x 300 mm - Recess in the table: 1300 x 400 x 80 mm - Stroke rate continuously adjustable: 20-120 strokes/min.

Condition: used, Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 180 mm, turning length: 180 mm, turning diameter: 180 mm, spindle bore: 42 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 60 rpm, overall weight: 6,000 kg, CNC LATHE GTS-150 For sale GTS-150 CNC lathe, a compact yet powerful machine suitable for precise and efficient turning operations. Thanks to its rigid construction, high spindle speed, and reliable FANUC control, this machine is an excellent choice for versatile workshop and subcontracting use. Technical specifications: Max. turning diameter: Ø180 mm Max. turning length: 180 mm Max. swing over cover: 180 mm Chuck size: 6″ Bar capacity: Ø42 mm Spindle bore: Ø51 mm Spindle speed range: 60–6000 rpm Spindle motor: 5.5 / 7.5 kW Spindle bearing diameter: Ø80 mm Spindle nose: A2-5 X1 / X2 travel: 155 mm Z1 travel: 180 mm Z2 travel: 500 mm Controller: FANUC 18i-TB Hydraulic / coolant tank capacity: 50 / 140 L Machine dimensions (L × W × H): 2.4 × 1.7 × 1.8 m Machine weight: approx. 6000 kg General: Rigid and stable construction Kedox Hr Slepfx Ah Eedt High-speed spindle with precise motion control Suitable for both single-piece and series production Excellent choice for subcontracting and precision machining Machine comes with IEMCA bar feeder Ask quote including transporation. Verify all specifications with the seller.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 1,332 h, construction height: 180 mm, construction width: 220 mm, No minimum price—guaranteed sale to the highest bidder! Markforged Metal X TECHNICAL DETAILS Printing process: ADAM – Atomic Diffusion Additive Manufacturing Build volume: 300 × 220 × 180 mm Max. part size: 250 × 183 × 150 mm Max. part weight: 10 kg Layer height after sintering: 50 µm and 125 µm MACHINE DETAILS Supported materials: Copper, 17-4PH stainless steel, Inconel 625, H13 tool steel, D2 tool steel Print chamber: heated Print bed: heated, vacuum-sealed print plate, automatic print bed leveling Printing system: two nozzles for metal material and release material Dimensions & Weight Dimensions: 575 × 467 × 1,120 mm Weight: 75 kg Power supply: 100–120 / 200–240 V AC Current consumption: 12 / 6 A Connection: IEC 60320 Type C20 Operating hours: 1,332 h EQUIPMENT Markforged Wash-1 Debinder Markforged Sinter-1 Sintering System Markforged Wash-1 TECHNICAL DETAILS Debinder Supported materials: all metals Cleaning media: Opteon SF79, Opteon SF80, or Tergo Metal Cleaning Fluid Control: integrated control system Workpiece holder: Stainless steel basket Washing area: 356 × 254 × 203 mm Washing volume: 18,356 cm³ MACHINE DETAILS Power supply: 110–120 V AC, single-phase Current consumption: 11 A Peak power consumption: 1,320 W Dimensions & Weight Dimensions: 609 × 685 × 1,067 mm Weight: 136 kg FEATURES Integrated control system Stainless steel basket Shut-off at low fluid level Shut-off at high vapor pressure Markforged Sinter-1 TECHNICAL DETAILS Furnace specifications Supported materials: chemically debound parts printed with Metal X Heating element: Kanthal Control: preprogrammed automatic cycle control Sintering cycle: 26 h Max. internal temperature: max. 1,300 °C Sintering capacity: 141 mm inner diameter × 305 mm length Sintering volume: 3,020 cm³ Sintering surface area: 348 cm² for a ceramic setter plate Setter plate dimensions: 11.4 × 30.4 cm Process gases: argon, argon-hydrogen mixture Retort: high-purity, carbon-free refractory retort Ksdpfx Aszx Rkbjh Ejdt MACHINE DETAILS Exhaust air requirement: 100–150 CFM, external exhaust Power supply: 200–240 V, single-phase Current consumption: 30 A Recommended circuit breaker rating: 50 A Dimensions & Weight Dimensions: 1,270 × 510 × 720 mm Weight: 136 kg FEATURES Pre-programmed automatic cycle control Kanthal heating element Ceramic setter plate High-purity, carbon-free refractory retort

Condition: excellent (used), Year of construction: 2022, Technical data: - Total filter capacity approx. 150 l/min Kedpfx Aozk Ek Teh Eodt - Filter fineness approx. 3 μm nominal - Dimensions (W x D x H) approx. 1400 x 1300 x 1100 mm - Tank capacity approx. 800 l Equipment: - 2 filter groups, individually backwashable, each with 1 TCF filter tower - 1 filter pump - 1 pneumatic unit - 1 manual sludge removal system with sludge bag - Internal system piping - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 unit of machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 70 l/min - Delivery pressure: approx. 5 bar - Drive: 400V, 50Hz 1 unit of cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 80-120 l/min - Delivery pressure: approx. 1.5 bar - Drive: 400V, 50Hz, IE3

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, pressing force: 150 t, stroke length: 215 mm, reverse speed: 150 mm/s, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used, High quality fully serviced Bystronic Beyeler 4metre cnc pressbrake for sale Machine Specifications Manufacturer: Bystronic Beyeler Kjdezpxt Ejpfx Ah Esdt Model: PR 150 (Pressure Reference) Year of Manufacture: 2006 Tonnage Capacity: 150 Tons Bending Length: 4100 mm (4 Metres) Hydraulic tool clamping CNC Control System: Cybelec Modeva Control Total Axis Configuration: 7-Axis (Back gauge: X, X1, R, Z1, Z2 + Beam: Y1, Y2) Key Features & Maintenance Advanced Crowning: Equipped with a hydraulic crowning system to ensure precise bending accuracy across the entire 4-metre bed length. Complete with tooling package as per photos Civil Work Savings: Free-standing design that requires no pit floor excavation, simplifying installation and relocation. Certified Service History: Fully serviced and maintained directly by Bystronic UK, ensuring optimal operational efficiency and reliability. Condition: High-quality, used, and fully serviced condition.

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m Kjdpez Dv Uyjfx Ah Eodt - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, Honing: R 220 euro R 220 EC R 420 EC R 620 R 360 So DL Ksdpfxswfdbce Ah Ejdt R185 EC-KF Rcc4 Set Blasting: RSKI 1000 RSKI700-3d-atex RT 250 euro AM: C1 M1 M1 Basic S1 In addition to the machines mentioned and shown, we have many other machines and accessories (blasting systems, conveyor belts, and small machines) available in stock. The machines can be purchased or rented. Contact us for (free) advice on honing, tumbling, and blasting technology.

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Kedpox Eg T Ejfx Ah Esdt

Condition: good (used), functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 620 mm, table width: 450 mm, table length: 1,800 mm, rotational speed (max.): 6,000 rpm, overall weight: 4,500 kg, input voltage: 400 V, FOR SALE: Primero KM-150 Vertical Machining Center A reliable, well-maintained vertical machining center is available immediately from our stock in Finland. The Primero KM-150 is a versatile and robust machine suitable for a wide variety of milling, drilling, and contouring operations—an ideal solution for job shops, subcontractors, and production facilities seeking to increase capacity without the cost of a new machine. Key Specifications: Brand / Model: Primero KM-150 Year of Manufacture: 2002 Country of Origin: Taiwan Control: C-TEK (English language interface) Spindle Speed: 0–6,000 rpm Kdjdpjy Hmi Ssfx Ah Eot Spindle Power: 7.5 kW Tool Holder: BT40 Tool Magazine: 16 positions External Coolant System: Yes Axis Travels: X-axis: 1,500 mm Y-axis: 650 mm Z-axis: 620 mm Working Table: Length: 1,800 mm Depth: 450 mm Machine Dimensions & Weight: Width × Depth × Height: 3,000 × 2,280 × 2,550 mm Weight: 4,500 kg Why choose this machine? The generous 1.5-meter X-axis travel and a solid 1,800 mm table make the KM-150 especially suitable for larger workpieces, mold and die applications, and general production milling. The user-friendly, English-language C-TEK control provides intuitive operation, while the BT40 spindle interface is an industry-standard, ensuring easy access to tool holders and consumables.

Condition: used, Year of construction: 2013, operating hours: 18,698 h, functionality: fully functional, overall weight: 1,010 kg, load capacity: 150 kg, arm reach: 2,200 mm, ABB industrial robot with IRB 6620-150/2.2 manipulator and IRC5 M2004 controller for industrial automation applications. The unit has been tested and is in working order. Typical applications include handling, assembly, machining, and general automation. The payload is 150 kg with a reach of 2200 mm. Manufactured in 2013, it has 18,698 operating hours and RobotWare software version 5.15.2005.02. It is equipped with an interconnect cable set, two additional cables, a FlexPendant programming device, an RW Control Module Key, and the following options: DeviceNet Lean, ProfiNet Fieldbus Adapter, and Path Recovery. Kodpfszdahnex Ah Eodt

Condition: excellent (used), Year of construction: 2009, Arburg 420C 1000-350/150 / Production line with the Arburg Multilift H side robot / 2K machine Kjdpezy Iz Hofx Ah Eodt Year of manufacture: 10.2009 Injection unit: Screw diameter: 45 mm Shot weight: 210 g Injection pressure: 1670 bar Dosing volume: 230 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420x420 mm Mold size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with the Arburg Multilift H side robot 2K machine with rotary table Control system with air valve Hydraulic core pull x 2 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit – screw diameter: ⌀30 mm – 71 g/shot Rotary table available at an extra charge Side robot Arburg Multilift H Year of manufacture: 2009 5-axis robot: Z-axis with servo motor (electric); X, Y, B and C axes pneumatic Safety package for robots Robot with adapter, conveyor belt, protective housing Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 5210 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven Kdodpsxbtvfefx Ah Ejt

Condition: used, Year of construction: 2004, Filling content - 150 ltr. Agitator - 0.75 kW Ksdpfx Asz Aizyeh Eodt Bubble - 800mm Overall height - approx. 270 cm Filling opening - approx. 35 cm Spout - approx. 20 cm Tap - inch Smoke pipe - approx. 18 cm Fuel - wood / steam

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Complete sawmill for pallet lumber production, consisting of: Individual sale of machine packages is also possible. 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory inlet measurement system, manufacturer Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter 20 - 90 cm. Ksdpfjx T Azwox Ah Ejdt 2. Sawmill: Möhringer band saw, running band saw with Flexi Drive carriage. Splinter detection device. Log feeding with stepped singulation. Laser measurement system Bidac. Kallfass model trimming. Resawing: EWD Optimes with chipper PF 19 and double-blade saw NKU. Brodbaek edger. Stacking system for main product, empty pallet handling for main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electrical and electronic control cabinets, etc. Disposal. Detailed plans or a video can be sent upon request.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 30 h, pressing force: 150 t, stroke length: 1,200 mm, table width: 800 mm, table length: 800 mm, retraction force: 20.5 t, overall weight: 14,700 kg, Equipment: documentation/manual, safety light barrier, This is a brand-new Langzauner press that was never used due to a company restructuring. Kdjdjzh I Ddopfx Ah Est Data sheets can be provided upon request.

Condition: used, Year of construction: 2006, A production line with 3 KUKA KR 150-2 industrial robots for the production and handling of molded parts is offered. Rated payload per robot: 150kg, max. reach: 2700mm, 6 axes, pose repeatability: +/-0.06mm, protection rating: IP65, mounting position: floor/ceiling, axis speeds: A1: 110°/s, A2: 110°/s, A3: 100°/s, A4: 170°/s, A5: 170°/s, A6: 238°/s, motion ranges: A1: +/-185°, A2: 0° to -146°, A3: +155° to -119°, A4: +/-350°, A5: +/-125°, A6: +/-350°. Including peripheral equipment and accessories. Weight per robot without controller: approx. 1245kg. The production line was used, among other applications, for the production of plant containers and is ideally suited for processes involving plastics as well as processed fiber-based bio-residues and residual materials. It is particularly designed for molding, pressing, handling and automation processes. Inspection by arrangement. Kedpozu Ndxsfx Ah Eodt

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of manufacture: 2003 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Kdodpfszy I Rhox Ah Eet Additional equipment: Production line with the Arburg Multilift side robot 2K machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit - screw diameter: ⌀25 mm - 49 g/shot A rotary table can be purchased for an additional charge. Dimensions: Weight: 7300 kg All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, option for grinding on the inside or on a flat surface mechanical oscillation Kdedpfxezdypws Ah Est electric adjustment of the unit up/down height of the grinding belt: 150 mm table angle adjustment option for grinding curved components total motor power: 3.6 kW 2004 power supply: 380 V