Used Kempact 253 R for sale (66,719)

Condition: ready for operation (used), Nilfisk Scrubber-Dryer Scrubtec R 253 B Combi Scrubber-Suction Machine Working width: 530 mm Suction width: 720 mm Tank volume: 70 l fresh water / 70 l dirty water Total weight: approx. 342 kg 0.6 kW You are welcome to visit us for an inspection. We can also arrange affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Dcsdpfxjzw Dxvj Aiiep Deviations in technical data and errors in the description of the article may occur and are subject to change.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine Dsdpfx Aewfdm Esiiocp EPS cutting machine with 4 independent moving axes and variable machine table.

Condition: new, Year of construction: 2023, operating hours: 150 h, Used Kaeser Booster Compressor N253-G (9/40) without start control / star-delta connection Year of Manufacture: 2023 Operating Hours: 150 hrs Equipment - Compressed air aftercooler design: finned-tube type - Oil supply: via oil pump - Oil pressure monitoring - Oil pressure and discharge temperature indication Technical Data Inlet pressure: 9 bar(g) Final pressure: 40 bar(g) Capacity at 40 bar: 1.74 m³/min Minimum ambient temperature: 2 °C Maximum ambient temperature: 40 °C Compressor block speed: 1,135 rpm Number of cylinders: 2 Drive motor rated power: 11.0 kW Dedpfxezaaqzj Aiijcp Motor efficiency class: IE3 Motor protection class: IP55 Electrical supply: 400 V / 3 Ph / 50 Hz Sound pressure level: 76 dB(A) Compressed air inlet connection: G 3/4" Compressed air outlet connection: G 1/2" Visit our always have a large selection of new and used compressors in stock!

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,202 h, laser power: 2,700 W, travel distance X-axis: 2,500 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 2530 Plus was manufactured in 2005 and will come with a Storemaster. It features a powerful 2700 W laser and includes advanced equipment such as a laser cutting head with 3.75" and 7.5" lenses, automatic sheet edge detection, and programmable cutting gas selection. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 2530 Plus CO2 laser cutting machine we have for sale. Contact us for further details. Dodpsz R Aa Rofx Aiiecp - Mains Supply: 400 V / 50 Hz- Connected Load: 63 kVA- Control Voltage: 24 V =- Required Fuse Protection: 3x 100 A- Compressed Air Connection: 7-10 bar- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 16 bar- Standard Equipment: Hi-Las high-pressure cutting, Laser cutting head with 3.75" lens, Laser cutting head with 7.5" lens, Cutting head quick-change device, Automatic sheet outer edge detection, Positioning laser diode, Programmable cutting gas selection/pressure setting, Microweld, SprintLas, Capacitive height control (DIAS III), ContourLas, AutoLas Plus, Oil spray device, Automatic pallet changer, Working area lighting, Slag/small parts chute, Multi-chamber dust extraction, Compact dust extractor, Automatic shut-off, Safety devices, ToPs 100 lite, Tele-diagnosis device, RJ45 network connection- Special Equipment & Accessories: 3.5" floppy disk drive, Detailed operating manual, Automatic pallet changer with safety light barrier, AutoLas Plus, Clamping jaws for Pallet A+B (4 pcs each), Additional 3.75" laser cutting head, Loading device (overhauled in workshop 2017), Programming software TRUMPF TruTops Laser, Gas fittings, Teleservice via Internet- Chiller Unit (Riedel L15/21-TR3.23, YOM: 10/2004): 400 V / 50 Hz, 42 A, IP54, Refrigerant R134a (11.5 kg), Max working pressure 20.2 barStoremaster:- Drawer Usable Area: 2,500 x 1,250 mm- Max Load per Drawer (evenly distributed): 3,000 kg- Max Load per Top Level (evenly distributed): 3,000 kg- Max Load per Rack Block (evenly distributed): 60,000 kg- Max Load at Crane Hook: 325 kg- Max Load under Vacuum Lifter (evenly distributed): 180 kg- Special Equipment: SCHMALZ vacuum lifter- Dimensions (from technical drawing): Height ca. 3,500 mm / 4,170 mm (modified/adjusted height ca. 3,500 mm), Width ca. 3,600 mm - 5,900 mm depending on layout/extension, Depth ca. 2,700 mm - 4,700 mm- Upper Grid Floors Capacity: 7,500 kg surface load each

Condition: as good as new (ex-display), Year of construction: 2026, - NEW - Manufacturer: Ganner Gannomat Type: SELEKTA 253 220 V, 1 phase, 50 Hz complete in standard version with: - Fully automatic electronic control with program selector switch COILING-GLUING-INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of the dowel feed rate - Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed gluing system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via time preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the gluing system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - Control light for glue residue level indicator in the glue container - 1 stainless steel container for 5 kg of glue and 1 stainless steel container for 5 l of water Dodpfodwi Rkox Aiijcp for flushing/cleaning - 4 rollers for moving the machine including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm Insertion allowance 7 - 20 mm Air connection: 6 bar Price ex warehouse 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, overall weight: 2,700 kg, heating capacity: 27 kW (36.71 HP), fuel: diesel, Equipment: documentation/manual, type plate available, We offer a like-new H&R 2708. Manufacturer: H&R Model: 2708 Year of manufacture: 2021 Dodps Ahip Sofx Aiijcp Condition: like new Machine type: wheel loader (yard loader) with pallet fork, quick coupler, electric joystick, and adjustable snow blade. Price: €12,000. If you have any questions or require further information, please feel free to send us a message or an email.

Condition: refurbished (used), Year of construction: 2014, operating hours: 617 h, functionality: fully functional, fuel type: electric, Hako Jonas / Sweepmaster B 980 R Fully reconditioned sweeper with new batteries, new drive wheel, 6-month warranty, and new DGUV V3 inspection including test report. Dcjdpfx Ajyalv Ajiiop Working width with side broom: 95 cm Main brush width: 70 cm Max. area performance: 5,800 sqm/h Container capacity: 60 L (2 x 30 L) Drive type: Battery Battery V/Ah: (24V) 4 x 6V 240Ah GEL Installed new parts / repairs carried out: - All drive belts replaced - New drive wheel - All bearings replaced - New GEL batteries - New heavy-duty wheels - All rubber strips replaced - New cartridge filter - Sweeping unit drive motor completely overhauled - Drive motor completely overhauled incl. brand new drive wheel - Sweeping unit completely overhauled incl. new main brush and new side broom Additionally, we offer: Service, repairs, and sales for all common Hako models.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Press force: 225 t Bending length: 3050 mm Throat depth: 405 mm Table width: 140 mm Machine weight (approx.): 14,100 kg Dedpfx Ajzw Adqsiijcp Space requirement (approx.): 4000x1900x3100 mm Accessories: - Control system upgrade in 2026 to Cybelec VisiTouch - 1 bending aid - Side protective doors - Laser safety system - Pneumatic tool holder EHT 26 mm - Crowning - Pneumatic die shifting - Foot switch - Controlled axes: y1, y2, x, R, z1, z2

Condition: excellent (used), mileage: 525,445 km, power: 265 kW (360.30 HP), first registration: 10/2004, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro3, number of seats: 2, total length: 9,190 mm, Equipment: ABS, crane, electric window regulation, retarder, = Additional options and accessories = - Lift Axle - Radio/CD player - Steering Axle = Remarks = Crane Number of hydraulic extensions: 2 Number of support legs: 2 Load Hook: × Meter capacity: 8 m Capacity kilo: 5580 kg = More information = General information Number of doors: 2 Year of construction: 2004 Cab: single Registration number: 1RNL674 Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering Weights Empty weight: 12.760 kg Carrying capacity: 13.240 kg GVW: 26.000 kg Functional Crane: FASSI F 130 A, behind the cab Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good Dcjdpfszvq Egex Aiiop Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 525,445 km, power: 265 kW (360.30 HP), first registration: 10/2004, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro3, number of seats: 2, total length: 9,190 mm, Equipment: ABS, crane, electric window regulation, retarder, = Additional options and accessories = - Lift Axle - Radio/CD player - Steering Axle = Remarks = Crane Number of hydraulic extensions: 2 Number of support legs: 2 Load Hook: × Meter capacity: 8 m Capacity kilo: 5580 kg = More information = General information Number of doors: 2 Year of construction: 2004 Cab: single Registration number: 1RNL674 Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering Weights Empty weight: 12.760 kg Carrying capacity: 13.240 kg GVW: 26.000 kg Functional Crane: FASSI F 130 A, behind the cab Extendable superstructure: Yes Condition Dcodpfx Aszvq E Toiijp Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Year of construction: 2018, operating hours: 10 h, condition: good (used), functionality: fully functional, Subject: RZ125-315 pump with diffuser, impeller for water with blades - Pump operating parameters: Q = 80-150 m³/h H = 14.7-12.5 m - Material: cast iron, grade ŻL250 - Sealing: rope seal - With 3SIE160L-6 motor, 11 kW, 960 rpm, 400V Dcodpfx Aioztxvnsiop 2. Quantity: 2 pcs.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Djdpfxsv Iy H Io Aiiocp Pallets: Textile - 40 x 55 cm, 8 pieces Pockets - 30 x 40 cm, 8 pieces Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg Power supply: 380V Price negotiable

Condition: used, Year of construction: 1993, Technical details: saw blade diameter: 250 mm Dedpfju Nifyox Aiiecp saw blade drill hole: 30 mm Cutting depth: 68 mm Cutting length: 450 mm total power requirement: 2,55 kW weight of the machine approx.: 150 kg dimensions L x W x H: 0,85 x 0,86 x 1,4 m This circular saw is hand operated, equipped with a table support 400 x 860 x 22mm, relocatable, which is placed on a frame. Uses: Wood, thermosetting plastics, plaster, chipboard and other similar materials. Details of the swivel arm: Length 800mm, max. projection 580mm, swiveling 45° right/left their indication via radial scale. Sawhorse data: Feed manually (handle), tiltable 90° left their indication via radial scale, motor 380V with 2,700 rpm, protection class IP44, *

Year of construction: 2023, condition: used, VIOLI Drawing Bench VM/TRI25-3s Manufactured in 2023 The VIOLI Drawing Bench VM/TRI25-3s is a robust and innovative machine designed for precise and efficient metal drawing, featuring a 3-meter useful length and a powerful 2,500 kg pulling capacity. Its patented hydraulic system ensures linear pulling, compact design, and consistent quality. TECHNICAL SPECIFICATIONS Useful Length: 3 Meters Pulling Power: 2,500 kg Drawing force: Max. daN 2500 Operating hydraulic pressure: 180 bar Drawing speed: Min. 0 m/min. - Max. 17 m/min. Drawing reduction: Around 15% of the section Clamping force POINTER: 100 Ton Tolerance: 1 mm Power supply: 400 V - 50 Hz Electric power: 9,2 KW Hydraulic oil: ISO 46 Motor Power: 9.2 kW - 380 V, 50 Hz Noise: At the workplace LP < 70 dB(A) Hydraulic System: Proportional hydraulic pump Carriage Sliding: with ball circulation guides Construction and movable installation of a hale holder to house 1 O hales in line with the trolley; Predisposition for cooling the lubricating oil with the insertion of a stainless steel pipe coil in the tank; Adjustable Die holder; Bar support system; Tank with pump for lubrication; Opening/ closure of pliers operated manually by pneumatic pistan; Compliance: Machine comply with the UE conformity regulations. DETAILED FEATURES Operating System: The system uses a hydraulic piston and patented technology for optimizing space, ensuring linearity with the drawing hole, and minimizing bending of the supporting structure. It allows for a compact die length and double the useful pulling stroke. Caliper Return: A patented double-circuit chain technology returns the caliper to its starting point. This allows the hydraulic piston's length to be half of the useful working stroke. Pulling Power: The pulling power is in line with the drawing die. Speed Control: Manual adjustable speed from 0 to 16 meters per minute (0−16 Mt/m). It offers fine regulation of the speed and constant speed derived from the hydraulics. Tolerance: The tolerance is 1 mm. Hydraulic System: Features a proportional hydraulic pump. Motor Power: 9.2 kW - 380 V, 50 Hz. Carriage: Carriage sliding with ball circulation guides. Hole Holder: Construction and movable installation of a hole holder to house 10 holes in line with the trolley. Lubrication: Includes a lubrication tank with a lubrication pump. There is also a predisposition for cooling the lubricating oil with a stainless steel pipe coil in the tank. Die Holder: Adjustable. Bar Support: Includes a bar support system. Pliers Operation: Opening and closure of pliers are operated manually by a pneumatic piston. Dcedpfx Aeyl U Sqeiijp Control Panel: The machine is equipped with a control panel FUNCTION The hydraulic drawing bench VM/TRI253S is a machine used for the cold reduction of the cross section of a metallic rod, both with round or shaped profile, or of an empty or “animated” metallic tube. The reduction of the section is obtained by passing the product through a calibrated drawing die and pulling it, using a mechanical clamp with the force required to obtain the reduction of the section. COMPOSITION OF THE DRAWING BENCH The machine is composed of the following main components: - Metal structure - Carriage equipped with a hydraulically controlled clamp - Carriage drive unit - Hydraulic system - Electrical system Metal structure The metal structure is composed of a recirculating ball guide. At the end of the rails, a suitable sized plate supports t...

Condition: used, Year of construction: 1990, machine/vehicle number: 3048 & 3047, Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of manufacture: 1990 Machine No.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outside broaching tractive force: 25.000kg Dsdpfoinim Tox Aiijcp cutting speed: 7,2 / 8,1 / 9,6m/min maximum tool length: 3520mm passage width: 520mm clamping area of the tool carrier: 3520 x 460 mm dimension: 12.300 x 6.400 x 4650mm power supply: 380V 50Hz / 110kW Accessories/ special equipment: - 6 tool carriers for tool change - machine documentation Remark / General The machines are in a good condition. The machines are dismantled and stored in our warehouse. The total volume of the plant is several trucks (approx. 70to per machine). The machines have produced connecting rods for passenger car diesel engines. Chain broaching machines are designed for mass production. The continuous (backstroke-free) working process in chain broaching is designed for maximum achievable productivity in external broaching. The chain broaching process is the only broaching process without a backstroke of the tools or workpieces. In chain broaching, the workpiece is continuously moved past the tool and thus performs the feed movement. and thus carries out the feed motion. This unique broaching process is only used for very large quantities in series production.

Condition: new, Year of construction: 2018, New R&B Plastics Machinery MAX 5-Extruder System Heavy-duty, purpose-engineered multi-extruder system manufactured by R&B Plastics Machinery, consisting of four MAX 1-1/4" × 30:1 extruders mounted over one MAX 2" × 24:1 main extruder, complete with specialty mounting structure, material loaders, heated adapters/hoses and centralized Allen-Bradley PLC controls. The system was fully assembled, integrated, inspected and pre-shipment tested at R&B's Saline, Michigan facility and has never been placed into production. Extruders (4) R&B MAX 1-1/4" × 30:1 X102 or equivalent bimetallic barrel liners Interchangeable standard-output screws Rossi gearboxes with high-temperature Viton seals 5 HP Marathon AC motors Four heat/cool barrel zones Heaters, high-speed blowers & dual thermocouples Rupture discs & pressure transducers Watlow melt-temperature probes & mica band heaters Stainless-steel hoppers Adjustable 45° feed-throat/carrier assemblies (1) R&B MAX 2" × 24:1 Main Extruder Djdpfozz Thbox Aiiocp Non-vented, air-cooled configuration MAX IMPACT high-output screw Colmonoy 56 flight lands X102 or equivalent bimetallic-lined barrel 25-30 HP Marathon Blue Max TEFC motor Rossi helical gear reducer Maximum screw speed: 100 RPM Three individually controlled heat/cool zones Melt-temperature & pressure transducers Stainless-steel hopper and water-cooled feed section Multi-Extruder Mounting System Engineered for 4 × 1-1/4" extruders over 1 × 2" main extruder Heavy-duty welded mounting frame Individual adjustment posts & safety stops Specialty extended main base Material Handling & Transfer (5) Foremost B-6-2 self-contained vacuum loaders (4) R&B heated adapter assemblies (4) heated hose assemblies, up to 12 ft R&B MAX PLC Control System Allen-Bradley CompactLogix PLC 15" Allen-Bradley operator control screen (4) 5 HP + (1) 25-30 HP Allen-Bradley VFDs PLC-controlled extruder heating/cooling Air-conditioned main electrical cabinet EWON remote-access system Integrated wire trays and electrical distribution Designed for 380 V / 3 Phase / 50 Hz Open-architecture electrical drawings, machine logic and documentation Condition: NEW / Never Used Complete documentation and operating manuals available. Important Scope Information Profile/die tooling and water bath are not included. Proprietary zipper/profile tooling and associated proprietary components are not included. The control cabinet contains provisions for additional downstream equipment, including water-bath and winder connections; these provisions should not be interpreted as inclusion of that downstream equipment in this R&B system listing. Equipment is stored and ready for shipment. Inspection available.

Condition: good (used), Year of construction: 2011, Technical Specifications (Spark 2530) • Plate size: up to 25” x 30” (635 x 762 mm) • Resolution: 2,000–4,000 ppi (up to 10,160 ppi for security) • Software: Grapholas CDI, supports 1-bit TIFF & LEN files Djdpfsw Tc Uisx Aiiocp • Dimensions: W 1,600 mm · D 870–1,180 mm · H 1,070 mm • Weight: 1,000 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PL071105402R, year of last overhaul: 2024, conveyor belt width: 122 mm, Equipment: documentation/manual, M&R dryer for plastisol and water-based inks in textile printing, with a large width of 122 cm. The dryer is in excellent condition and is electrically powered. The belt is wide enough to accommodate two rows of textiles side by side! Dsdpfow Stp Isx Aiiscp We have already disassembled the dryer and prepared it for shipping. Therefore, there are no costs for disassembly. We will also take care of loading it onto the truck. We have a very reliable shipping company locally. The shipping costs depend on the destination. We recommend a direct shipment, which we can arrange!

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical specifications: - Bending and rolling processes performed manually, - Max. working width: 1020 mm - Max. material thickness (St 40): 1.25 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of the upper die: approx. 85 mm - Max. adjustability of the bending die: 20 mm - Shaft diameter: 55 mm Dcedpfx Aiof S Tg Teisp - Upper shaft can be pivoted outwards - Rear shaft can be adjusted parallel and at an angle - Space requirement: approx. W 1500 x H 1400 x D 750 mm - Weight: approx. 400 kg

Condition: good (used), Year of construction: 2009, CNC control, control panel, computer monitor, screen, TFT industrial monitor -Manufacturer: B&R, control panel, operating terminal, control panel -Type: PowerPanel 500 5PP5:210261.001-01 -Individual components: see photos Djdjtrzp Eepfx Aiiecp -Number: 2 terminals available -Price per piece -Total dimensions: 740/730/H210 mm -Weight: 26 kg/pc.

Condition: used, B&R Provit Controller 5C2001- removed from K-Tec 200-1000S - removed from running machine Dodep Rb Hcepfx Aiiecp - fully functionalIf the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the ufacturer: B&R spare part no.: 1 manufacturer no.: 5C2001.16 Dition: gebraucht

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 782 mm, total length: 1,220 mm, total width: 424 mm, Tested forklift battery for your forklift - 48V 5PZS 775AH - DIN C + 1 year warranty + includes Aquamatik (automatic watering system) + includes end connectors & REMA 320 plug (other plug types available upon request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,220 mm Width 424 mm Height 782 mm Weight: approx. 1,150 kg Suitable for the following models and others: Dcedpfxjy Rnn Ds Aiiop Atlet REACH TRUCK Atlet UHD 250 Atlet UHS Atlet UMS 160 Atlet UND 140 Atlet UNS 200 Caterpillar N Caterpillar NR16N2H Caterpillar NR16NH Caterpillar NR20N2H Caterpillar NR20NH Caterpillar NR20NHA Caterpillar NR25N2X Caterpillar NR25NH Crown ESR Crown ESR 3020-1.4 Crown ESR 3020-1.6 Crown ESR 3020-2.0 Crown ESR 4000-1.4 Crown ESR 4000-1.6 Crown ESR 4000-2.0 Crown ESR 4500 Crown ESR 4500-1.4 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5000-2.0 Crown ESR 5260 Crown ESR 5260-1.4 Crown ESR 5280 Crown ESR 5280S-1.6 Crown ESR 5280S-2.0 Hyster R1.0 Hyster R1.4 Hyster R1.4H Hyster R1.6 Hyster R1.6HD Hyster R2.5 Jungheinrich ETV Jungheinrich ETV 214 Jungheinrich ETV 216 Jungheinrich ETV 320 Jungheinrich ETW 216 Linde A (1250) – 5022-00 Linde A – 5224-00 Linde R 14 – 1120-00 Linde R 14 – 1120-00 – frontal battery change Linde R 14 G – 1120-00 – frontal battery change Linde R 14 HD – 1120-00 Linde R 14 HD – 1120-00 – frontal battery change Linde R 16 – 1120-00 Linde R 16 – 1120-00 – frontal battery change Linde R 16 – 115-00 Linde R 16 AS – 1120-00 – frontal battery change Linde R 16 AS 1270 – 1120-00 Linde R 16 G – 1120-00 – frontal battery change Linde R 16 HD – 1120-00 Linde R 16 HD – 1120-00 – frontal battery change Linde R 16 S – 115-00 Linde R 16 S ACTIVE – 115-12 Linde R 20 – 1120-00 Linde R 20 – 1120-00 – frontal battery change Linde R 20 – 115-00 Linde R 20 G – 1120-00 – frontal battery change Linde R 20 HD – 1120-00 – frontal battery change Linde R 20 W – 1120-00 – frontal battery change Linde R 25 – 1120-00 Linde R 25 – 115-00 Linde R 25 F – 8923-00 Linde R 25 W – 1120-00 – frontal battery change Mitsubishi RB14 Mitsubishi RB14-25 Mitsubishi RB14N Mitsubishi RB16 Mitsubishi RB16NH Mitsubishi RB25N2X Still FM 14 Still FM 17 Still FM 20 Still FM-4W 25 Still FM-X 12 Still FM-X 14 Still FM-X 17 Still FM-X 20 Still FM-X 25 Yale MR 16 Common battery sizes are available – please enquire. Transport possible.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 782 mm, total length: 1,220 mm, total width: 352 mm, Tested forklift battery for your truck - 48V 4PZS 620Ah - DIN C + 1 year warranty + Includes Aquamatik (automatic filling system) + Includes end cell connector & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity test protocol included on delivery) + Year of manufacture: 2024 Djdpey Rniujfx Aiiecp Dimensions: Length 1,220 mm Width 352 mm Height 782 mm Weight: approx. 960 kg Suitable for the following models and many others: Linde A (1250) - 5022-00 Linde A - 5224-00 Linde R 10 B - 1120-00 Linde R 10 B - 1120-00 - front battery change Linde R 12 B - 1120-00 Linde R 12 B - 1120-00 - front battery change Linde R 12 C - 1120-00 Linde R 14 - 1120-00 Linde R 14 - 1120-00 - front battery change Linde R 14 B - 1120-00 - front battery change Linde R 14 G - 1120-00 - front battery change Linde R 14 HD - 1120-00 Linde R 14 HD - 1120-00 - front battery change Linde R 14 W - 1120-00 Linde R 14 W - 1120-00 - front battery change Linde R 16 - 1120-00 - front battery change Linde R 16 AS - 1120-00 - front battery change Linde R 16 AS 1270 - 1120-00 Linde R 16 B - 1120-00 - front battery change Linde R 16 C - 1120-00 Linde R 16 G - 1120-00 - front battery change Linde R 16 HD - 1120-00 Linde R 16 HD - 1120-00 - front battery change Linde R 16 S - 115-00 Linde R 16 S ACTIVE - 115-12 Linde R 16 W - 1120-00 Linde R 16 W - 1120-00 - front battery change Linde R 20 - 1120-00 Linde R 20 - 1120-00 - front battery change Linde R 20 - 115-00 Linde R 20 G - 1120-00 - front battery change Linde R 20 G - 115-12 Linde R 20 S - 115-12 Linde R 20 W - 1120-00 - front battery change Still FM 14 Still FM 17 Still FM-X 12 Still FM-X 14 Still FM-X 17 Still FM-X 20 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV 216 Jungheinrich ETV 320 Jungheinrich ETV 325 Jungheinrich ETV C 16 Toyota/BT RRE 200 Crown ESR Crown ESR 3020-1.4 Crown ESR 3020-1.6 Crown ESR 3020-2.0 Crown ESR 4000-1.4 Crown ESR 4000-1.6 Crown ESR 4000-2.0 Crown ESR 4500 Crown ESR 4500-1.4 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5000-2.0 Crown ESR 5240 Crown ESR 5240-1.4 Crown ESR 5260-1.4 Crown ESR 5260-1.6 Crown ESR 5260-2.0 Crown ESR 5280S-1.6 Crown ESR 5280S-2.0 Atlet REACH TRUCK Atlet UMS 160 Atlet UMS 200 Atlet UNS 140 Caterpillar NR14/16 Caterpillar NR14N Caterpillar NR14N2S Caterpillar NR16N Caterpillar NR16N2HS Caterpillar NR20NH Hyster R1.6 Mitsubishi RB14N Mitsubishi RB14N2S Mitsubishi RB16N Mitsubishi RB20N2H Mitsubishi RB20NH Nichiyu FBR14-75B OM-Pimespo-Fiat XR 14 AC Rocla REACH MAST TRUCK Yale MR 14 Yale MR 16 Common battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 533 mm, Tested forklift battery for your truck - 48V 5PZS 775Ah - DIN B + 1-year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity protocol supplied with delivery) + Year of manufacture: 2024 Dimensions: Length 1,035 mm Width 533 mm Height 784 mm Weight: approx. 1,160 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde A - 5224-00 Linde E 16 - 386-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 10 Linde K 12 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - front battery change Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front battery change Linde R 16 N HD - 1120-00 - front battery change Linde R 20 N - 1120-00 Linde R 20 N - 1120-00 - front battery change Linde R 20 N - 113-00 Linde R 20 N - 113-00 - vertical battery change Linde R 20 SN - 115-08 - vertical battery change Still EK 11 Still FM-X 14 N Still MX 10 Still R 20-16 Still RX 20-18 Still RX 20-18 P Still RX 20-20 Still RX 20-20 PL Jungheinrich ETM 214 Dcjdpfx Asy Rnn Roiiop Jungheinrich ETM 216 Jungheinrich ETV Jungheinrich ETV C 16 Jungheinrich ETV Q 20 Crown ESR 5220-1.6 Caterpillar NOH10NH Caterpillar NR20NH Common battery sizes available - please enquire. Delivery possible.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 443 mm, Tested forklift battery for your forklift – 48V 4PZS 620Ah – DIN B + 1 year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,035 mm Width: 443 mm Height: 784 mm Weight: approx. 960 kg Suitable for the following models and others: Linde A (1120) - 52-00 Linde K - 5231-00 Linde K - 5231-00 - side extraction Linde K 10 Linde K 10 - vertical extraction Linde K 12 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - front extraction Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - front extraction Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 N - 1120-00 - front extraction Linde R 14 N - 1120-00 - vertical extraction Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 14 SN - 115-08 - vertical extraction Linde R 16 AS 1140 - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front extraction Dodpfxey Rnizs Aiiecp Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N - 115- - vertical extraction Linde R 16 N HD - 1120-00 - front extraction Linde R 16 SN - 115-08 Linde R 20 - 1120-00 Linde R 20 N - 1120-00 - front extraction Linde R 20 N - 113-00 Linde R 20 SN - 115-08 Linde V 10 E - 14 - vertical extraction Linde V 10 E Linde V 12 E - vertical extraction Linde V 12 E - vertical extraction Still EK 11 Still FM 14 N Jungheinrich EKS 312 Jungheinrich ET 214 Jungheinrich ET 216 Jungheinrich ETM 214 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 216 Jungheinrich ETV Q Jungheinrich ETV Q 20 Jungheinrich ETV Q 25 Crown ESR 5220 Crown ESR 5220-1.4 Crown ESR 5220-1.6 Caterpillar NR16N2C Hyster K1.0H Steinbock-Boss WR 16 Other common battery sizes available on request. Transport possible.