Used Kempi Minarc 150 for sale (19,238)

Condition: new, Year of construction: 2025, fuel type: diesel, power: 120 kW (163.15 HP), motor manufacturer: Perkins 1106A-70TG1, General information Field of application: Construction Weights Empty weight: 1.341 kg Functional Generator capacity: 150 kVA CE mark: yes Other information Fuel consumption: 22,6 L/Hour at 75% Load Prime Hedpfowafy Asx Afisnu Generator: FG Wilson FGL30080 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 327 l Transport dimensions (LxWxH): 2,45x1,01x1,544 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Year of construction: 2018, condition: excellent (used), Heraeus Kendro HeraCell 150 Co2 Incubator Technically and optically as good as new HeraCell 150 incubator HERAcell has instead of the instead of the usual water tray new type of water reservoir. This ensures high relative humidity (rH) and, above all and above all for short moisture recovery times. Compared to conventional CO2 incubators with water trough HERAcell achieves a moisture recovery time up to five times faster humidity recovery time. Consistent humidity Short humidity recovery times play an important role, especially when the the door of the incubator has to be opened frequently door must be opened frequently or volumes of media are processed. For devices with a water tray the air layer between the bottom and tray prolongs the moisture recovery time. The result is high evaporation rates in the cultures. HERAcell, on the other hand, ensures very short - up to five times times faster - thanks to superior thanks to superior technology: - Large water surface area (due to the use of the entire inner chamber floor) - Direct heat transfer from the heated floor into the humidifying water - Patented floor heating after after door opening and during O2 gassing Early water level alarm The water level is continuously monitored monitored, and an acoustic and and optical alarm signals signals in good time that water needs to be needs to be topped up. ContraCon - decontamination with moist heat at 90 °C The patented automatic decontamination system specially developed and patented for Heraeus incubators ContraCon decontamination routine has been proven in independent independent tests at 90 °C and high and high humidity to eliminate a large number of microorganisms, including Hjdjiv S E Uspfx Afisnu mycoplasmas completely eliminated

Condition: excellent (used), Year of construction: 2004, The machine can be inspected under power. Hsdpfsxmttnex Afienu

Condition: used, Year of construction: 1985, Please contact ATS Norway for more information Please provide reference number upon request: 18856 Specifications: 1985 model Complete unit Control cabinet Motor 3 conveyors Small screen Hodpevgybpsfx Afisnu Ready for delivery Description:Used cubicator for sale, sold complete with motor, control cabinet, 3 conveyors, and small screen.Currently configured for cubical shaping of crushed rock (gravel/fines), but can be adapted for other applications.In working condition and ready for transport. Own weight: 10000 Model: BN 150 kubisator

Condition: like new (used), Year of construction: 2011, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 5,000 rpm, travel distance X-axis: 157 mm, travel distance Y-axis: 35 mm, travel distance Z-axis: 464 mm, rotational speed (max.): 6,000 rpm, total height: 1,885 mm, total length: 3,675 mm, total width: 2,258 mm, overall weight: 9,000 kg, CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464,8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Number of lower turrets: 1 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Part catcher Workarea light Bar Loader ILS - RBK Machine running time: Nominal Kva: 67,2 Hnjdpfx Aexiwnnsfiju Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height mm: 1.885 Weight kg: 9.000

Condition: new, The B 150 D Belt/Disk Sander from KNUTH is a robust and precise machine designed for efficient grinding in the Grinding Machines category. This heavy belt grinder features a large grinding surface with a durable sanding belt that runs over a wide contact roller, which measures 200x150 mm, ensuring excellent grinding results on flat surfaces, edges, and radii. Its powerful main drive allows for effective grinding, deburring, and chamfering tasks. The adjustable grinding support, complemented by an eye protection shield, prioritizes user safety and maximum accuracy during operation. Designed with user convenience in mind, the B 150 D allows for quick belt changes without the need for tools and includes integrated vacuum exhaust to maintain a clean work environment. This machine comes with a base, one sanding belt, a safety observation shield, and operator instructions. You can take your craftsmanship to the next level with the B 150 D Belt/Disk Sander; order online today! Hnsdpfxep Auhuo Afiou

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Serial number: CAT00C71TGTY01744 Weights Empty weight: 1.918 kg Functional Generator capacity: 150 kVA CE mark: yes Other information Generator: Caterpillar LC 3114H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 349 l Transport dimensions (LxWxH): 3,52x1,13x1,81 Production country: CN Hnedpfxowqkn Tj Afiju Additional information Please contact Kenny Bongers, Tijmen Pesselse, DPX Power or Arjen van Dijk for more information

Year of construction: 2020, condition: like new (used), functionality: fully functional, Brand new never used. Please check out our other listings as well. Hnsdpovzr Udjfx Afieu

Condition: new, overall weight: 2,000 kg, empty load weight: 383 kg, maximum load weight: 1,617 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, brakes: other, machine/vehicle number: NEW-13, New series ! Braked tandem high loader with aluminium drop sides foldable and removable on all sides, 4 lashing brackets on each side in a V-groove, automatic jockey wheel, 13-pole electrical system, hot-dip galvanized and welded steel frame, low loading area height plus freight to Gera and vehicle registration fee net 200 € net Optional accessories at extra charge: equipment for 100 km/h approval, flat tarpaulin, high tarpaulin, leaf grille, spare wheel, etc. Financing / leasing possible Pictures exemplary, partly with accessories against surcharge !!! Hnedpfeghpcdjx Afiju

Condition: excellent (used), Year of construction: 2002, Tampoflex TF 150 E tampon printing machine cliché board: 400x250mm tampoprint control voltage: 230v 50Hz air: 4-6 bar Hjdpfx Afeh Rv Sisijnu machine dimensions: 1200x1600x600 weight: 240 kg

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, metal band saw machine -Manufacturer: Pehaka, horizontal band saw automatic band saw -Drive: 0.8 kW -Cutting data flat: 320 x 150 mm -Cutting data square: 150 mm -Saw blade speed: continuously adjustable, 20 - 195 m/min Hjdpfx Afohwxb Tjijnu -Saw band: approx. 3700 mm -Coolant system -Dimensions: 1800/940/H1310 mm -Weight: 528 kg

Condition: excellent (used), mileage: 186,225 km, power: 110 kW (149.56 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, wheelbase: 2,800 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6, loading space width: 2,310 mm, loading space length: 3,670 mm, loading space height: 510 mm, Year of construction: 2015, VF6NSTG40E451466 = Further information = Technical information Number of cylinders: 4 Engine displacement: 2,953 cc AdBlue system: Yes Maximum front axle load: 2,500 kg Maximum rear axle load: 4,600 kg Hjdpfxevkp Nke Afienu Dimensions Dimensions (L x W): 579 x 237 cm Weights Unladen weight: 3,273 kg Payload: 3,227 kg GVW: 6,500 kg Maintenance, history, and condition General technical inspection (AIT): inspected until November 2025 Technical condition: very good Visual condition: very good Identification License plate: 53-BHT-9 Further information Contact Sales for further information. = Company information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. MOB: Nederlands) Available on What's App and Viber. When you pay by bank transfer, the money needs to be tranfered to our Bank Account underneath. Always check the payment details that are stated on our website. In case you have received other information please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bench details: Rabobank Lane of Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Serial number: CATDE150PN7F00113 Weights Empty weight: 1.902 kg Functional Generator capacity: 150 kVA CE mark: yes Other information Fuel consumption: 24.8 Liter per Hour at 75% Load Generator: Caterpillar A2625L41 Frequency: 50 Hnodpfxolwitio Afisu Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 325 l Transport dimensions (LxWxH): 3,34x1,172x1,749 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information

Condition: good (used), Year of construction: 1994, I will sell a Tampoflex Jumbo 150-400 pad printing machine, manufactured in 1994. Functional and in good condition. Hnedpfx Afev Eqateieu

Condition: repair required (used), Year of construction: 2002, functionality: limited functionality, cutting height (max.): 150 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, input frequency: 50 Hz, overall weight: 7,800 kg, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, Equipment: CE marking, Used Mayer AL150 (advanced line) saw for aluminium up to 150mm thick. Technically and visually in excellent condition, with normal signs of use, but for its age and operational hours it is very tidy. Saw length: 3,200 mm Hnedpfjxmbhyox Afiju Saw depth: 3,200 mm Control unit OK Saw motor OK incl. frequency inverter Drive/positioning of rip fence OK Saw carriage feed motor/cabling NOT OK!! Machine is dismantled and stored at our warehouse in Barneveld. Immediately available including modern PC (Dell XE2) with Windows 7 (see photos)

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 45 mm Injection pressure 2116 bar Clamping Unit Clamping force 1500 kN Opening stroke 300 mm This Battenfeld VM 150/750V R1520 UNIGLOG B6S was manufactured in 2011. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Battenfeld VM 150/750V R1520 UNIGLOG B6S. Contact us for more information. Application Types Injection Moulding Hnjdpfjxg Uikjx Afiju

Condition: used, mileage: 198,098 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,400 mm, overall weight: 3,500 kg, empty load weight: 2,105 kg, maximum load weight: 1,395 kg, first registration: 06/2016, loading space length: 3,050 mm, loading space width: 2,000 mm, loading space height: 400 mm, emission class: euro6, color: blue, driver cabin: other, brakes: other, number of seats: 3, Equipment: ABS, air conditioning, airbag, cabin, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, Condition: see photos. Body/Superstructure: High & Long Box, furniture transporter, fleece-lined interior walls with load securing rails on both sides. Loading dimensions: Length = 3,083 mm x Width = 1,765 mm x Height = 1,894 mm. Rear wing doors 270 degrees, right sliding door, LED interior lighting, air conditioning, 3 seats, reversing camera, automatic transmission, cruise control, load assistant, radio navigation with color display, Bluetooth phone, hill descent control assistant, multifunction steering wheel, electric mirror adjustment, heated exterior mirrors, electric windows, ABS/ASR/ESP, airbag, central locking with remote control, headlight range adjustment, wheelbase 3,682 mm, gross vehicle weight 3,500 kg, kerb weight 2,105 kg, payload 1,395 kg. If a new TÜV inspection is required, we would be happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, WITHOUT new DGUV, WITHOUT new SP, WITHOUT new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend a viewing and inspection of the item to avoid any misunderstandings regarding its condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. Hjdpfoxl Smdsx Afisnu

Condition: excellent (used), Year of construction: 2019, Digital ceramic printing system for flat glass. Hodpfx Afeqlapzoisnu Max. glass size: 2400 x 4200 mm. Working height: 940 mm. Total length: approx. 5630 mm. Max. Width of the machine: approx. 4800 mm. Available from approx. end of January 2024.

Condition: reconditioned (used), - 150 mm cutting height - 500 mm cutting depth - Pneumatic saw stroke - 2 roller conveyors approx. 4,000 mm long Hnjdpfx Aevkf Naefiju - 500 mm roller width - 3 adjustable length stops

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding Hnjdpfx Afoxg Icksiou - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine Hnjdpfjg Dvdcox Afiju

Condition: ready for operation (used), Year of construction: 1990, functionality: limited functionality, Machine with 30 nail feeders in three nail boxes. Freely programmable nail release and stop position, as well as nail release monitoring for 30 nail feeders. Quick hammer box adjustment with various hammer boxes. Usable template length max. 3200 mm. Includes nail filling platform, control cabinet, control console, and ifm SPS Ecomat 100. Hodpfjxl D D Ujx Afienu

Condition: good (used), Indramat RAC 3.1-150-460-A0I-Z1-220 Spindle Drive Controller For sale is an Indramat / Bosch Rexroth RAC3.1-150-460-A0I-Z1-220 AC Main Spindle Drive Controller – used, but in good, working condition. Technical details: Supply voltage: 3 × AC 380–460 V Control voltage: AC 230 V Weight: approx. 49 kg Continuous current: approx. 92 A Max. output power: approx. 55 kW Ambient temperature: +5°C to +45°C (operation), −30°C to +85°C (storage) Hsdpfx Aexl A Ncofijnu Max. operating altitude: up to 1000 m above sea level. NN Protection class: IP10, humidity class "F" according to DIN 40040 Integrated cooling via fan Integrated emergency stop system Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 2004, Tiebarless Engel Victory 750/150 Tech (2004) Clamping force: 150 t Screw diameter: 50 mm Shot weight: 353 g Shot volume: 392 cm3 Platten size: 750 x 520 mm Mold height: 300 mm Maximum daylight: 900 mm Injection pressure: 1910 bar \+ Robot ERC Hnodswyb I Nepfx Afiju Type: Horizontal Drive: Hydraulic

Condition: used, Condition: Used machine Year of manufacture: 2014 Hedew Afxwspfx Afijnu Operating hours: on request Engine: Electric Maximum load capacity: 220 kg Platform size: 0.92 x 1.20 m Maximum working height: 14.60 m Maximum lateral outreach: 7.13 m Weight: approx. 6,975 kg Overall length: 6.05 m Overall width: 1.50 m Overall height: 1.97 m Key features: • 0.92 m x 1.20 m platform with low entry • Side entry with fall bar safety guard • Articulated joint at 7.07 m • Non-marking solid rubber tires 24x7.5 in / 600 x 190 mm • Travel speed - transport mode: 5 km/h • Travel speed - work mode: 0.60 km/h • Gradeability: 22% • 0.92 m x 1.20 m platform with low entry • Side entry with fall bar safety guard • Articulated joint at 7.07 m • Non-marking solid rubber tires 24x7.5 in / 600 x 190 mm • Travel speed - transport mode: 5 km/h • Travel speed - work mode: 0.60 km/h • Gradeability: 22% • 230 V power outlet • Warning buzzer and indicator light (tilt, overload, slope) • Lashing and tie-down points • Work basket with perforated floor • CAN bus technology • Easy Link • Integrated charger with voltage selector • Basket arm • Manual emergency descent • Negative brake on rear wheels • Non-marking tires • Emergency stop switch in the platform basket and on the upper carriage • Proportional control • Secondary Protection System (SPS) • Signal horn in the work basket • Smartview traction battery • Driving at maximum working height possible • Toolbox in work basket Leasing / financing available through leasing partner Hire-purchase option – rent first, then buy (rental fees can be deducted from the final purchase price) The offer is non-binding and subject to prior sale. We are happy to demonstrate the machine and provide you with a personalized offer. The machine has CE certification and all necessary documentation is available. No liability for input errors. Subject to prior sale and changes.