Used Jig Borer for sale (265)

Condition: ready for operation (used), Maximum material height: 50mm Built-in extraction system Table dimensions: 1000x650mm Arm clearance: 980mm Motor power: 0.75kW Iodpfx Adjv Hdlxjnsa

Year of construction: 2018, condition: excellent (used), From insolvency: Model RRI 8460 serial no.18/70139708 with TENSION DEVICE SPITZNAS WITH AUTOMATIC FEED mODEL 512089940 in original case Isdpjk T Av Refx Adnea

Condition: new, Technical specifications:Dimensions and weightsWorking height 850 - 1150 mmRocker support 735 mmLength approx. 1270 mmWidth / depth about 730 mmHeight about 1130 mmWeight approx. 121.5 kgdriveDrive type electric motor with direct driveElectrical dataRecording power 7.5 kWSupply voltage 400VPhase (s) 3 PhCurrent type ACMains frequency 50 HzsawbladeDiameter 700 mmcutting capacityRocker round wood 240 mmRocker turning cut 250 mmRocker firewood 370 x 240 mm Isdpfsvwfxhsx Adnsa

Year of construction: 2005, condition: good (used), From insolvency: Ijdpslczd Hefx Adnea Spitznas model 512120010 year of manufacture unknown with TENSION DEVICE SPITZNAS WITH AUTOMATIC FEED mODEL 512089940 in original case

Condition: used, Year of construction: 1996, Serial number: 8xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21912 Iodpfx Adsxz N Ahjnoa Specifications: 1996 model 1848 hours (I'm a little worried) 564 stroke hours 82 kW Weight: 8160 Machine width: 230 cm Winch Directional instrument Boart HD125 hammer Chassis Diesel heater Videos Ready for delivery Description: We have a 1996 Nemek 503 TXI drilling rig w/ low hours for its age for sale. Errors and defects may occur as the rig is from 1996. But the owner says it works as it should. It has few hours on the engine and hammer in relation to its age. Ready for delivery Own weight: 8160 Engine hours: 1848 Model: 503 TXI borerigg m/ lite timer i forhold til alder

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Iedpfxexyadto Adnja Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: good (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 120 mm, table length: 600 mm, table height: 380 mm, type of input current: AC, We are selling our Hauser S3 coordinate grinding machine The machine is in good condition and still in operation. Year of manufacture: 1991 Travel: 400x250x120 mm Table: 600x380 mm Notes: - The price does NOT include any accessories! - Collection by the buyer, ex works. Iedpfsxzqbxsx Adnea - Collection date to be agreed with the seller. - No warranty - Advance payment (invoice) or cash payment upon collection

Condition: excellent (used), Year of construction: 2005, load capacity: 5,000 kg, Self-supporting, braked rotating device for jig construction, tool making for assembly, welding, painting, etc. with foot-operated remote control, right/left switchable with speed control upon request, surcharge €400 when working with warning light Machine is technically in new condition, almost unused Dimensions: Height to axle center 1000mm Isdpshtrp Isfx Adnea Mounting plate 400 x 400 mm Hole spacing approx. 240 x 240 mm External dimensions of box section 1000mm x 850mm More machines of this type in various sizes are in stock. Load capacity up to 5000 kg New machine price over €20,000

Condition: good (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 288, Space requirement incl. additional equipment – Width: approx. 3000 mm Depth: approx. 3000 mm Height: approx. 3500 mm Machine dimensions: Width: 1590 mm Depth: 1530 mm Height: 3000 mm Frequency converter: 510 x 270 x 710 mm Hydraulic unit: 710 x 510 x 470 mm Electrical cabinet: 1340 x 450 x 1670 mm Industrial vacuum cleaner: 590 x 370 x 590 mm Tool cabinet: 1000 x 500 x 1000 mm Packing crate for the machine: 1500 x 2100 x 2700 mm Gross weight of the machine with standard accessories: approx. 2500 kg Net weight of the machine with standard accessories: approx. 1750 kg Scale reading on partial drums: 0.01 mm Scale reading on vernier: 0.001 mm Iodpfx Aoxzc Rxjdnsa Guaranteed positioning accuracy: 0.003 mm Power requirement: approx. 6.0 kVA Compressor suction capacity: approx. 9 m³/h Usable table surface: 550 x 320 mm Table adjustment range: 400 x 250 mm Vertical slide stroke: approx. 500 mm Max. clearance between grinding motor and table: approx. 500 mm Distance between spindle center and vertical slide: 310 mm Max. grinding diameter: approx. 220 mm Grinding diameter with intermediate plate: approx. 280 mm Max. included angle for taper grinding: 12° Stepless vertical stroke adjustment of grinding spindle: 3–110 mm Stepless adjustment of stroke speed up to: Stepless adjustable planetary movement speed: approx. 5–330 rpm Stepless speed range of grinding motors: 9,000–80,000 rpm Stepless speed range of grinding turbines: up to 225,000 rpm.

Condition: like new (used), Year of construction: 2010, operating hours: 11 h, functionality: fully functional, MailBag - foliranje revij in knjig ali listov, z naslovi ali brez naslovov. Stroj je deloval samo 11 ur, kupljen je bil nov, leto 2011. Iedpfx Adjxy Szkjnea

Condition: used, Year of construction: 2004, Serial number: EKJ0043xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21885 Isdpfsxy Eyasx Adnea Specifications: - 2004 (2012) model - Hours: Approx. 600 - Weight: 6200 kg - Chassis from 2004 - The rest is from 2012 - Drilling equipment is not included - 2 engines can be included as parts - Ready for delivery Description: The rig burned down and then everything was replaced in 2012. The chassis is from 2004, but the rest has been replaced. The job was done by Epiroc. The machine is ready for delivery. Own weight: 6200 Engine hours: 600 Model: 2004 (2012) Welldrill 3050CR Borerigg

Condition: excellent (used), Year of construction: 2015, Okamoto ACC 64 CA Surface grinding machine Okamoto ACC 64 CA with CA Surface Grinding Control, year of manufacture 2015, excellent condition. CE compliant!! The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: Isdpfx Adoxp H Ikonja - Year of manufacture: 2015 - Table size: 605 x 400 mm - Table travel: 800 x 440 mm - Distance spindle center (min/max): 22.5 – 522.5 mm - Max. load: 1000 kg - X axis longitudinal travel: 3000 – 25000 mm/min - Y axis crossfeed: 0 – 2000 mm/min - Rapid traverse: 4000 mm/min - Z axis infeed: 0.0001 – 0.001 mm - Rapid traverse: 1000 mm/min - Grinding wheel: 355 x 38 x 127 mm - Speed: 500 – 2500 rpm - Motor: 5.5 kW - Weight: 4950 kg - Dimensions: 3550 x 2695 x 2203 mm Accessories and features: About the machine: Offered here is a surface grinding machine Okamoto ACC 64 CA with CA Surface Grinding Control. This universal surface grinding machine is in excellent original condition. It comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. With a grinding path of 800 mm longitudinally and a cross travel of 400 mm, this machine is ideal for toolmaking, jig manufacture, and small batch production. The series stands out for its comprehensive standard equipment and ease of operation. The robust spindle head design and the double V-guideways in both longitudinal and cross axes ensure lasting precision. The intuitive operation of the control elements simplifies handling and significantly increases productivity. The guideways are automatically lubricated via a central lubrication system. The Okamoto has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Okamoto under power on site. You can find further surface grinding machines from reputable manufacturers on our website.

Condition: used, functionality: unexamined, workpiece weight (max.): 5,000 kg, Two-column coordinate boring machine CNC Manufacturer: Mikromat WMW Type: CBKoZ 1400x2240/2 Control: Siemens 840D (installed approx. 1997) Space required: 7000 x 6500 x 5300 mm (LxWxH) Weight: 22,500 kg incl. - tool holders shown - extensive documentation. For further information, see attachments. The machine can be tested/demonstrated on site under power. Freight basis: From location, without dismantling The buyer must dismantle and load the machine himself. A 10-ton bridge crane is available for this purpose, which was also used to assemble the machine at the time. Further assistance and the use of a forklift truck may be possible by arrangement. All information without guarantee. Subject to prior sale. Iodpfexyq Hxsx Adnsa The object of purchase is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duties by the seller or for any injury to life, body or health.

Condition: like new (used), Year of construction: 2005, Self-supporting, braked rotating device for jig construction, tool making for assembly, welding, painting, etc. with foot-operated remote control, right/left switchable with warning light when working with speed control on request (additional charge approx. €400) Machine is technically in mint condition, almost unused Weight 1200 kg Dimensions: Height to axle center 1000 mm Mounting plate 400 x 400 mm Hole spacing approx. 240 x 240 mm Iedpfx Adshua Dfjnea External dimensions of box section 1000 mm x 850 mm More machines of this type in various sizes are in stock. Load capacity up to 5000 kg New machine price over €20,000

Condition: good (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 149, • DIMENSIONS AND WEIGHTS Iedpfxsxzc D Es Adnoa Space requirement including additional equipment Width: approx. 3000 mm Depth: approx. 3000 mm Height: approx. 3500 mm Machine body dimensions: Width: 1590 mm Depth: 1530 mm Height: 3000 mm Frequency converter: 410 x 250 x 610 mm Hydraulic unit: 710 x 510 x 470 mm Electrical cabinet: 1170 x 420 x 1260 mm Vacuum cleaner: 440 x 270 x 400 mm Tool cabinet: 1000 x 500 x 1000 mm Packing crate for machine: 1480 x 2100 x 2700 mm Gross weight of machine with standard accessories: approx. 2500 kg Net weight of machine with standard accessories: approx. 1750 kg Resolution on partial dials: 0.01 mm Resolution on verniers: 0.001 mm Guaranteed positioning accuracy: 0.003 mm Power requirement of the machine: approx. 6.0 kVA Compressor air intake capacity: approx. 9 m³/h Usable table area: 550 x 320 mm Table adjustment range: 400 x 250 mm Vertical slide stroke: approx. 500 mm Maximum clearance between grinding motor and table: approx. 500 mm Distance between spindle center and vertical slide: 310 mm Maximum grinding diameter: approx. 220 mm Grinding diameter with intermediate plate: approx. 280 mm Maximum included angle for taper grinding: 12° Infinitely variable vertical lift of the grinding spindle: 3–110 mm Infinitely variable stroke speed up to Infinitely variable planetary motion speed: approx. 5–330 rpm Speed range of grinding motors (stepless): 9,000–80,000 rpm Speed range of grinding turbines (stepless): up to 225,000 rpm

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade manufacturing fixtures, jaws, tooling, jigs and end-use parts.  Designed for use in production, it prints parts that are stronger than machined aluminum,  at a fraction of the cost.  It combines the best surface quality, build size and reliability.  Speed up production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, available only on the X7. Technical specifications: Printer features Process: Fused filament fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Iodpevvldusfx Adnea Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100-240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available Fibers: Carbon fiber, Carbon fiber FR, Glass fiber, Aramid fiber (Kevlar®), HSHT glass fiber Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Filling: closed cell filling: multiple geometries available Software Eiger Cloud: Slicing, parts and build job management (other options at additional cost) Security: 2-factor authentication, Org Admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 On sale from Location Condition: used Scope of delivery: (see pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 started remaining filament rolls of Onyx (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, mileage: 415,000 km, Year of construction: 2018, Serial number: WDB9630041022xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21273 Specifications: Model year: 2018 Mileage: approx. 415,000 km EU-approved until: 05.08.2026 Wheelbase: 550 cm 4x2 354 hp Full air suspension Retarder Winch capacity (front and rear): 5.5 or 6 tons (unsure) Jige International Simplex GT5 superstructure Underlift Tires (see pictures) Automatic transmission Remote control DAB radio AC/climate control Sleeper bed Video available Delivery by agreement Description:2018 MERCEDES-BENZ ACTROS 1935 4x2 recovery truck.The control unit has recently been overhauled.Owner is unsure if the winch capacity is 5.5 or 6 tons.Video available.Delivery by agreement. Maintenance / Work that needs to be done: Replace EGR valve (due to leakage) Replace crankcase ventilation Replace intercooler hoses (due to burnt oil residues) Replace right rear tail light Replace right-side contour light on sun visor Replace white/red marker lights on both sides at the rear Replace right-side side marker light Replace parking brake switch Replace battery Km: 415000 HK: 353 Technical approved: Yes EU-approved until: 05.08.2026 Own weight: 11540 Total Weight: 7385 Payload: 7385 Isdpfx Adsxatpisnja Width: 254 Length: 978 Euro: 6 Model: ACTROS 1935 4x2 bergingsbil. Nyoverhalt styringsenhet. SE VIDEO

Condition: used, Hello, For sale: Coordinate drilling machine BKOZ 800x1200. The machine is operational and in continuous use; inspection and testing are possible on site. Iedpfx Adexyi N Eonea The price listed in the advertisement is net; VAT is to be added. The machine can be viewed in Starachowice, Kwiatkowskiego 13. Phone contact available from 7:00 to 16:00 668495897

Condition: excellent (used), Year of construction: 2009, operating hours: 8,000 h, functionality: fully functional, compressed air connection: 8 bar, warranty duration: 6 months, Equipment: documentation/manual, FOR SALE – TOSH LOGICA 05 / TZS1 High-Precision 1/2 Colour Pad Printing Machine for Heels, Wedges & Cylindrical Rolling Applications Isdpfx Adoxyiprenea Offered for sale: TOSH Logica 05 / TZS1 – an industrial pad printing machine designed for demanding 1/2-colour decoration applications requiring high precision, repeatability, and controlled rolling movements. This model is optimized for the footwear industry, but thanks to its robust construction and rolling printing capabilities, it is also suitable for many non-footwear applications, such as cylindrical objects that demand precise controlled rolling transfer. TECHNICAL HIGHLIGHTS - Fully electric drive with comprehensive numerical control for every movement, ensuring outstanding print stability, accuracy, and repeatability. - Hermetic oval ink cup system – extended size 340 × 120 mm, supporting large clichés and extended printing surfaces. - Standard cup diameter: 2 x 160 mm included, but this unit is equipped with the larger 340 × 120 mm variant for extended artworks or long rolling prints. - 1 fixture (toe/counter-toe type) with vacuum hold-down, originally designed for heels/wedges but fully adaptable to custom jigs for other products. - Advanced NC-controlled rotation axis enables precise angular positioning from 0° to 180°, supporting complex shapes and asymmetric objects. - Supports multiple printing modes: • Front/Back cycle • Rolling cycle • Combined cycle (mixed rotation + rolling) - Programmable pad descent stroke for irregular geometries. - Decoration area limiting device – ideal for textures, partial prints, and precise transfers of artwork. - Self-diagnostic function, memory for all parameters, and fast job changeovers.

Condition: like new (used), Year of construction: 2006, 2000 kg load capacity Isdpfx Ajhwv R Dsdnja Cantilevered rotating device with brake for jig construction, tool making for assembly, welding, painting, etc. with foot-operated remote control right/left switchable with clamping frame for elevation of approx. 1000 mm Machine is technically in new condition, almost unused Dimensions: Height to center of axle 850 mm More machines of this type in various sizes are in stock. Load capacities from 500 kg to 5000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 1,020 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left Ijdeid Iymepfx Adnsa To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: used, WEBSTER & BENNETT DH 48” VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL DH 48” TABLE DIA 1219.0 mm SWING 1524 mm HEIGHT UNDER RAIL 650.0 mm SPEED 4.5 – 100 RPM Iodpfxoxcn Hue Adnsa FEED RATE 0.0050” – 0.250” / 0.127 – 6.035 mm/min PLUS 2 AXIS MITUTOYO DIGITAL READOUT 4 JAW CHUCK 4 CHUCK JAWS SAFETY GUARDING COUNTERWEIGHT CLEAN CONDITION

Condition: good (used), Year of construction: 1987, We offer you: Jig Grinding Machine Manufacturer: HAUSER Model: S3-DR Year of manufacture: 1987 Technical specifications: Travel: - X-axis: 400 mm - Y-axis: 250 mm - Z-axis: 300 mm Accessories, depicted tools and clamping devices are included in delivery only if specified in the additional information. Subject to changes and errors in technical data and information, as well as prior sale! Iodoxw Sx Rjpfx Adnja

Year of construction: 2006, condition: like new (used), Rotating device cantilever, braked for jigmaking, toolmaking for assembly, welding, painting etc. with foot remote control, right / left switchable with warning light during operation machine is technically in new condition, almost unused weight 1250 Kg dimensions: Height to axle center 1000mm mounting plate 400 x 400 mm Iodpshtzuvefx Adnoa hole spacing approx. 240 x 240 mm outer dimensions box part 1000mm x 850mm there are more machines of this type in different sizes in stock. load capacity up to 5000 Kg new price of the machine over 20.000.-€

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 2000 kg load capacity Cantilevered rotating device with brakes for jig construction, tool making for assembly, welding, painting, etc. with foot-operated remote control right/left switchable Ijdpfx Aehwv Rvsdnja Machine is technically in mint condition, almost unused Dimensions: Height to center of axle 850 mm More machines of this type in various sizes are in stock. Load capacities from 500 kg to 5000 kg