Used Jig Grinding for sale (4,269)

Condition: used, Year of construction: 1990, table length 600 mm Gedpfjw Eykyjx Afiouh table width 380 mm control FANUC 0-M longitudinal travel 500 mm cross travel 300 mm largest grinding diameter 230 mm control FANUC 0-M Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35

Condition: good (used), Year of construction: 1975, Coordinate grinding machine HAUSER Type: 5 SM built in 1975 with 2 axis digital readout Heidenhain . Gusdpfx Ajr H Dvdofieh Table: 750 mm X 620 mm Travels: X700 mm Y500 mm Z150 mm Grinding head speeds : 9000 - 80 000 rpm Total power : 6,3 KW Good condition in stock. Dimensions of the machine : 2500 mm X 1700 mm X2700 mm Weight approx. 5100 kg. Documentation available.

Condition: used, Year of construction: 1981, x-travel 650 mm y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 total power requirement 15 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____ Gedot Hw S Uepfx Afiouh Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, Being in course of recondtion completion in our worshop in Gals, Switzerland Can be inspected under power Machine in perfect condition, revised and checked out thoroughly. Positioning accuracy max. 0.003 mm on full travel. Geometry as per original protocol, as new. Specifications: - Control Fanuc 15 MB, 6 axes X, Y, Z, C, U, W and rapid stroke Z-axis - 7th axis in option: A-axis rotary table - Table travel : 650 x 450 mm - W-axis travel: 500 mm Gusdpjw Ed E Ijfx Afieh - Hi-Cut system Accessories: - CBN rotary form dressing equipment - 1 grinding spindle 45S ( 9,000 to 45,000 rpm) - 1 set of collets E19, dia 4, 6, 8, 10 mm - 1 set of gring arbors, length 35, 50 and 100 mm - 1 set of clamping tools OPTIONAL: - Grinding spindle 60S, 9'000 to 60'000 rpm

Condition: ready for operation (used), Jig grinding machine HAUSER 5 SM Table length: 750 mm Table width: 620 mm Longitudinal travel (X-axis): 700 mm Transversal travel (Y-axis): 500 mm Vertical travel (Z-axis): 150 mm 2 columns execution Travel of the vertical slide: 500 mm Passage from grinding motor to table: 500 mm Max grinding diameter with display-plate: 300 mm Passage between the columns: 840 mm Max angle with taper grinding: up to 16 degrees Vertical travel of grinding spindle, stepless: -From 3 mm -Up to 145 mm Travel speeds, stepless: up to 2.8 m/min Radial fine feed of U-axis: up to 4.5 mm Planetary motion speeds of C-axis, stepless: Guedpfxjuyuuns Afijh -From 10 rpm -Up to 280 rpm Total power required: 6.3 kW Aprox weigth 5.000 kg Jig grinding machine HAUSER 3 SMO Table length: 595 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm 1 column execution Travel of the vertical slide: 500 mm Passage from grinding motor to table: 490 mm Distance from spindle-center to vertical slide: 310 mm Max. grinding diameter: 220 mm -With display-plate: 280 mm Max. angle with taper grinding: -Up to: 12° Vertical travel of grinding spindle (stepless): -From: 1 mm -Up to: 110 mm Travel speeds (stepless): -Up to: 6 m/min Planetary motion speeds (stepless): c axis -Up to: 330 rpm Spindle motor: 7.50 kw weight: about 2000 kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Jig Grinding Machine / Brand: Hauser / Type: S 50 / Adcos, Year of construction: 1986, Modernization: 2018 Modernization in 2018 included: - New drives and electronics - Fire extinguishing unit, Brand: Kraft & Bauer - Extraction unit with stand and special bonnet, Brand: Büchel - Control Adcos CNC 800 - New command unit - Electronic hand wheel - Hydraulic Z-axis lifting unit - ASS with crash sensor Godpfx Afern Trheijuh The machine can be inspected by appointment under power. Operating hours (26/02/2024): * Total switch-on hours: 32.065 * Spindle hours: 13.414 TECHNICAL SPECIFICATIONS: * Control: Adcos CNC 800 Working range of the slides: Adjustment range: * X-axis (table slide): 900 mm * Y-axis (grinding head): 600 mm * W-axis (movable crossbeam): 600 mm * Z-axis: 170 mm SHZ (Z-axis free programmable in 10 grinding levels) * Workpiece height: approx. 500 mm Accuracy: approx. 5 µ/min Table surface: 640 x 950 mm Load: 1 tonne Working range of the grinding head: Speed with electric motors: 4.000 – 80.000 rpm Speed with air turbines: bis 40.000 und 160.000 rpm EQUIPMENT: * Grinding contact indicator * Extraction system * Fire extinguishing system * Documentation There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: used, Year of construction: 2001, table length 600 mm table width 380 mm control FANUC 16i-M longitudinal travel 500 mm cross travel 300 mm largest grinding diameter 230 mm Jig grinding machine | HAUSER - S35-400 Gedswmwwyspfx Afieuh The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35

Condition: used, machine/vehicle number: 208 597, x-travel:400 mm y-travel:250 mm workpiece height:500 mm grinding diameter:220 mm table surface area:600 x 320 mm throat:310 mm range of angles:12 ° Gedpfxscxxuwo Afiouh grinding wheel stroke - vertical:110 mm stroke speeds:0 - 6 m/min grinding spindle speed:max 50.000 U/min peripheral speed:max 35 m/sec workpiece weight:80 kg weight of the machine ca.:2 t dimensions of the machine ca.:1,2 x 1,3 x 2,3 m

Condition: used, Year of construction: 1987, x-travel 400 mm y-travel 250 mm workpiece height 485 mm Control ELESTA CNC 314 total power requirement 10 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Guedot Hw Txepfx Afioh Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm 18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4.000 kg Accessories / Special Features: * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with a free programming,the U-Axis is not interpolating it is just an infeed axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis W Axis for vertical positioning of grinding head, Z Axis as high speed stroke axis, also for blind-hole grinding and surface grinding. U Axis for the infeed cycles during bore grinding. C Axis Feed for the of the Planetary Head. * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets * Built-on Acoustic Grinding Contact Display Device Model KSV 5. * Separate coolant unit with band filter. * Built-on fire extinguishing system. Separate switch and control cabinet. Covered working area. Separate hydraulic unit * Central lubrication, service tools. Condition : Very good - Machine can be inspected under power. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: reconditioned (used), Year of construction: 1998, operating hours: 44,675 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 140 mm, spindle speed (max.): 60,000 rpm, spindle speed (min.): 9,000 rpm, workpiece weight (max.): 800 kg, table width: 860 mm, table load: 1,500 kg, travel distance W-axis: 635 mm, Equipment: documentation/manual, Fully overhauled and in perfect condition as per original specifications and accuracy. 6 Axis X-Y-Z-C-U 7th axis CNC-rotary table with tailstock in option Control: Fanuc 15 MB Grinding Spindle 60S speed 9,000 to 60,000 rpm Hi-Cut system with full enclosure Godpfx Aswb Db Uofisuh CBN Form rotary dressing with Fischer spindle and Dr. Kaiser diamond wheel This machine is under power and can be seen in our facility in Gals, Switzerland Garantee of 6 months Shipment, installation and training can be provided

Condition: used, Year of construction: 1968, Technical details: x-travel: 400 mm y-travel: 250 mm workpiece height: 500 mm grinding diameter: 220 mm table surface area: 600 x 320 mm Godpfovbzwzex Afieuh throat: 310 mm range of angles: 12 ° grinding wheel stroke - vertical: 110 mm stroke speeds: 0 - 6 m/min grinding spindle speed: bis 50000 U/min peripheral speed: max. 35 m/sec capacity: ca. 7 kVA power capacity: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 3 x 3 x 3 m rotary table d = 300 mm frequency changer *

Condition: used, Year of construction: 1975, x-travel 420 mm y-travel 270 mm workpiece height - mm table-size 254 x 482 mm throat 254 / 318 mm grinding spindle speeds 12. - 60.000 U/min. spindle stroke 92 mm spindle turning speed range 90, 136, 184, 280 U/min number of strokes adjustable 2 - 120 Hübe bei 51 mm 0 1,25 µm bei 30 mm Required air-pressure 7 bar weight of the machine ca. 1430 kg dimensions of the machine ca. 1,45 x 1,2 x 2,4 m The Moore gauge grinding machine is equipped with grinding heads that are driven by an air turbine. There are 4 grinding heads available. Guedpfxevgnm Ts Afijh Pneumohydraulically controlled up and down stroke movement, infinitely adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the measuring spindles with vernier 0.001 mm, contour grinding, cone grinding, groove grinding, eccentric adjustment of the grinding spindle. Machine body made of Meehanit cast, strong internal ribbing, cross slide fully supported - no overhang of the table, heating in the main spindle housing. Special price! Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1999, table length 600 mm table width 380 mm control FANUC 16-M longitudinal travel 500 mm cross travel 300 mm largest grinding diameter 230 mm Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Gusdpfx Ajw Eyk Hjfioh #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35

Condition: used, machine/vehicle number: 1484.04.01, x-travel:700 mm y-travel:400 mm workpiece height:620 mm Gusdpfx Afocxxxuoioh table::1000x630 mm internal grinding diameter:250 mm :115 mm feed speeds infinitely variable:0,5-63 mm/min total power requirement:6 kW weight of the machine ca.:4,5 t dimensions of the machine ca.:2375 x 2470 x 2560 m precision machine with high-speed spindle 30000-60000 rpm as well as second high-speed auxiliary spindle (12000-30000 rpm), facing slide head +/- 50 mm traverse, feed display, digital RPM display, ARKURITE model VRO 300 electronic stepless speed adjustment, digital control with RS 232 interface, stepless pendulum stroke 5-100mm, stepless planetary spindle speed 5-250 rpm, reading accuracy 0,001 mm, selector switch for manual / NC operation

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 250 mm workpiece height mm Control CNC 314 ELESTA total power requirement 15 kW weight of the machine ca. 5500 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Gujdpfxot Hxcno Afioh Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight/Total weight approx. 4.000/5.500 kg Accessories / Special Features: • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation with a free and easy programming for Linear and circle interpolation. Direct Input of data on keyboard, also loading data on RS 232 connection. There is also a handwheel control device for setting – up purposes. Manual feed correction during the working cycle possible. • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good for blind holes. • W Axis for vertical positioning of grinding head slide, • U Axis for the infeed cycles during bore grinding, grinds different bore-Ø automatically. • C Axis Feed for the of the Planetary Head, grinds radii and contours • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some collets and arbors • Built-on Acoustic Grinding Contact Display Device Model KSV 5. • Separate coolant unit with band filter. * Built-on fire extinguishing system. • Separate switch cabinet and control unit, Separate hydraulic unit with oilchiller, • Central lubrication, service tools, collets and grinding arbors/tools. Condition : Very good - Machine can be inspected under power commissioned by a Specialist. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: new, Year of construction: 2025, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Godpfxsq Nf Uwj Afijuh Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: as good as new (ex-display), functionality: fully functional, Table size 540 x 250 mm Max table travel 560 x 260 mm Max distance from table to spindle center 450 mm Table slide-way Double-V rail Feed of cross handwheel, per revolution 5 mm Feed of cross handwheel, pe graduation 0,02 mm Feed of vertical handwheel per revolution 1,25 mm Feed of vertical handwheel per graduation 0,01 mm Wheel speed (50 Hz) 2850 rpm Wheel speed (60 Hz) 3440 rpm Wheel size 200x31,75x20 mm Power of spindle motor 1500 W Hydraulic station motor 1500 W Working pressure 3 Mpa Godeu Hzg Rspfx Afisuh Max runoff 18 L/min Fuel tank capacity 80 L Coolant pump 40 W Machine's net weight 900 kg Size 1,80x1,40x1,80 m Robust and reliable construction. Zero working hours Price should remain the same till end of December.

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS Gusdpfxjirfpgj Afijh AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: new, functionality: fully functional, Year of construction: 2025, Microsilica, also known as silica fume or condensed silica fume, is a byproduct of producing silicon metal or ferrosilicon alloys. Microsilica powder grinding mills are used to process microsilica powder for various applications, including the production of high-performance concrete, refractory materials, and other specialty products. Grinding mills play a crucial role in reducing microsilica particles to the desired fineness. Here are some key aspects related to microsilica powder grinding mills: 1. Mill Types: - Ball Mill: A traditional ball mill is commonly used for grinding microsilica. It relies on the impact and attrition forces to reduce particle size. It is effective for both wet and dry grinding. - Vertical Roller Mill (VRM): VRM technology is known for its energy efficiency and the ability to grind materials into a narrow particle size distribution. It is suitable for grinding microsilica. 2. Grinding Process: - The grinding process involves feeding microsilica particles into the grinding mill. The grinding media (balls or rollers) inside the mill crush and grind the microsilica particles into a fine powder. 3. Particle Size Distribution: - Controlling the particle size distribution is crucial for achieving the desired properties in the final product. The grinding mill should be equipped with mechanisms to control and monitor particle size distribution. 4. Mill Design and Components: - The design of the grinding mill, including the type of grinding media, liners, and the grinding chamber, influences the efficiency and performance of the milling process for microsilica. 5. Air Classification (Optional): - In some cases, air classification systems are integrated into the grinding process to separate fine particles from coarser ones, ensuring a more uniform product. 6. Control Systems: - Advanced grinding mills often come with automated control systems to regulate various parameters such as feed rate, mill speed, and product fineness. 7. Material Handling: - Efficient material handling systems are essential to transport microsilica to and from the grinding mill. This may involve pneumatic or mechanical conveying systems. Godpfxjq Nxp So Afiouh 8. Cooling Systems: - Grinding processes generate heat, and efficient cooling systems are often integrated to maintain the temperature within a controlled range. 9. Dust Collection: - Microsilica powder grinding can produce airborne dust. Dust collection systems are necessary to maintain a clean and safe working environment. 10. Quality Assurance: - Grinding mills for microsilica should be equipped with quality assurance features, such as in-line particle size analysis, to ensure consistency in the final product. When selecting a microsilica powder grinding mill, factors such as production capacity, energy efficiency, and the required particle size distribution should be considered. Additionally, mills should be chosen based on the specific characteristics of the microsilica being processed and the intended application of the final product.

Condition: new, functionality: fully functional, Year of construction: 2025, Cement Mill & Ultrafine Grinding Mill 🏗️ Introduction to Cement Mill & Ultrafine Grinding Mill In the world of construction and materials processing, achieving the right particle size is essential. Introducing the Cement Mill and Ultrafine Grinding Mill—two pivotal machines designed to deliver superior grinding performance for cement production and ultrafine materials. Let’s dive into their features and applications! 💼 🔥 What is a Cement Mill? A Cement Mill is a crucial piece of equipment in cement production. It grinds clinker, gypsum, and other additives to produce fine cement powder. This machine ensures the optimal particle size for high-quality cement, essential for building robust structures. 🚀 🔧 What is an Ultrafine Grinding Mill? An Ultrafine Grinding Mill is designed to produce extremely fine powders from various raw materials, such as minerals, chemicals, and industrial waste. It operates at high efficiency, delivering ultra-fine materials for advanced applications like coatings, plastics, and ceramics. 🌟 💼 Key Benefits of Using Cement Mill & Ultrafine Grinding Mill 1. High Efficiency: Both mills are engineered for maximum efficiency, ensuring rapid processing times and reduced energy consumption. 🌿💡 2. Superior Grinding Performance: Achieve consistent, high-quality output with precise control over particle size. 🏭 3. Versatility: Suitable for a wide range of materials, making them essential for various industrial applications. 🌳 4. Durability and Reliability: Built with robust materials, these mills offer long-lasting performance in demanding industrial environments. 💪 📈 Applications in Industry Cement Mill Applications: 1. Cement Production: Essential for producing high-quality cement for construction projects. 2. Infrastructure Development: Used in creating concrete for roads, bridges, and buildings. Ultrafine Grinding Mill Applications: 1. Mineral Processing: Producing ultra-fine powders for advanced material applications. Gjdpfxsq Nyydj Afisuh 2. Chemical Manufacturing: Used in creating fine chemicals for various industrial processes. 3. Environmental Applications: Grinding industrial waste for recycling and reuse. ♻️ 🌟 Conclusion Whether you’re in construction, materials processing, or advanced manufacturing, the Cement Mill and Ultrafine Grinding Mill are indispensable tools. Their efficiency, versatility, and superior performance make them a valuable addition to any production line. Contact us today to learn more about these innovative machines and how they can revolutionize your operations! 📞

Year of construction: 2025, condition: new, functionality: fully functional, A cement clinker grinding mill is a specialized equipment used to grind the hard nodular clinker into fine powder, which is cement. Most cement is currently ground in ball mills and also vertical roller mills, which are more effective than ball mills. Here are key features and information about cement clinker grinding mills: Gusdpfoq Nfbhjx Afieh 1. Raw Materials: - The main raw material for making cement is clinker, which is produced by sintering limestone and clay. Other materials such as gypsum, fly ash, or slag may also be added during the grinding process to achieve specific properties. 2. Grinding Process: - The clinker and other additives are finely ground in the grinding mill to produce cement. The grinding process is a crucial step in cement production and contributes significantly to the final quality of the product. 3. Types of Mills: - Ball Mills: Traditional ball mills are commonly used for grinding clinker. They operate by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. - Vertical Roller Mills (VRM): VRM technology has become increasingly popular for clinker grinding. These mills use a rotating table with rollers to crush and grind the clinker, providing energy efficiency and a smaller footprint compared to ball mills. 4. Gypsum Addition: - Gypsum is often added during the grinding process to control the setting time of the cement. It prevents flash setting of the clinker and facilitates the formation of a workable and pumpable cement paste. 5. Quality Control: - Quality control measures, such as monitoring the fineness of the cement, chemical composition, and other properties, are implemented during the grinding process to ensure the final product meets the required specifications and standards. 6. Clinker Cooling: - Before grinding, the clinker is produced by heating the raw materials in a kiln. The clinker is then cooled before entering the grinding mill to prevent excessive heat build-up during grinding. 7. Dust Collection and Environmental Considerations: - Dust collectors and air pollution control systems are often employed to capture and control the dust generated during the grinding process, addressing environmental and safety concerns. 8. Packaging and Storage: - After grinding, the cement is typically stored in silos before being packaged in bags or dispatched in bulk for distribution to construction sites or for sale in the market. Cement clinker grinding mills play a crucial role in the cement production process, and advancements in technology continue to improve the efficiency and environmental sustainability of the grinding process.

Condition: new, Year of construction: 2025, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Gedjq I Nw Ispfx Afijuh

Condition: new, Year of construction: 2025, power: 300 kW (407.89 HP), A ball mill is a key equipment in the grinding process of barite. It is designed to grind and blend solid or hard materials into smaller pieces, particularly powder. In a barite grinding plant, ball mill is often used for grinding barite into an ultrafine powder for various applications. Here are key features and aspects of a ball mill used for barite grinding in a plant: 1. Mill Structure: - The ball mill for barite grinding typically consists of a horizontal cylindrical shell with ends that are flanged and bolted on. The ends may contain openings for feeding and discharging the barite. 2. Grinding Media: - Steel or ceramic balls are commonly used as grinding media in the ball mill. The grinding media helps in the grinding process by reducing the size of the barite particles. 3. Rotation: - The mill rotates on its horizontal axis. The rotational motion of the mill, driven by a motor, causes the grinding media to cascade and grind the barite. 4. Feed and Discharge: - Barite is typically fed into the ball mill through a hopper or a conveyor. The ground barite particles are discharged from the mill through a discharge end. 5. Control System: - Modern ball mills are equipped with control systems to monitor and regulate critical parameters, such as mill speed, feed rate, and temperature. This allows for precise control of the grinding process. 6. Size Reduction: - The primary purpose of the ball mill is to reduce the size of barite particles. Grinding occurs as the barite is subjected to the impact and friction forces of the grinding media. 7. Classification: - Depending on the desired fineness, a classification system may be integrated into the ball mill to separate fine particles from coarse ones. This ensures that the final product meets the required specifications. 8. Dust Collection: - A dust collection system may be incorporated to capture and collect fine particles generated during the grinding process, ensuring a clean and safe working environment. 9. Liners: - The interior of the ball mill is often lined with wear-resistant materials, such as steel or rubber, to protect the mill shell from abrasion and ensure longer equipment life. 10. Application in Barite Processing: - The ball mill in a barite grinding plant is a crucial piece of equipment for processing barite ore into a fine powder. This powder is used in various industries, including oil and gas drilling, coatings, and pharmaceuticals. 11. Safety Features: - Safety features, such as monitoring devices and emergency shutdown systems, are typically incorporated into ball mills to ensure safe operation. The specific design and features of a ball mill for barite grinding can vary among different manufacturers and applications. It is essential to follow proper procedures and guidelines for the operation and maintenance of the equipment to ensure optimal performance and longevity. Guodpfoq Ngafjx Afish

Year of construction: 2025, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Guedpfx Aovzx Auefish Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Working Principle of Cement Mill The cylinder will rotate by the transmission device. Due to the inertial centrifugal force, the steel balls will stick on the liner plate and rotate with the cylinder together. When the steel balls come to a certain height, it will fall down by gravity and impact the raw material. And the repeated going-up, falling down, slide and roll of the steel balls can grind the raw material together with the liner plates.

Condition: good (used), Year of construction: 2025, Maynards is offering the machinery and equipment from GoodYear’s 17–22 inch passenger car and SUV tire production facility in Fulda. On-site production will continue until the end of September 2025. We invite you to express your interest and submit offers for the complete facility or larger equipment packages. Immediate purchase is possible. Gedpoxa Dqdjfx Afiouh Products (until closure): - High-performance and ultra-high-performance tires - Run-on-flat tires - SUV/4x4 tires - Diameter range: 17–22 inches Plant and Systems: - Mixing lines (Banbury 1–3) - Extrusion lines (Triplex, Quadruplex) - Apexing and filling/weighing systems - Steel cord production (winders, extruders, carousel, spoolers) - Tire building machines (R2.5, SOC-88, R1, ISR1, cutting machines) - Calendering lines (Comerio, framework, winding machines) - Tire curing and finishing lines - Tire curing presses (HF & Krupp, 77 units) - Grinding and cut-to-length machines (Matteuzzi, Collmann, Roentgen, TR5, TR7) - Cutting and calendering systems (Bias 66, KEF HTBC, rubber calender) - Tire carts - Tire testing equipment Utilities and Supply Systems: - Steam boiler systems - Water treatment - Oxygen supply & compressors Storage and Infrastructure: - Silos & oil tanks - Fire protection and safety systems (plant fire brigade) - Material handling and transport equipment (forklifts, tow tractors, pallet trucks) - Hydraulic pallet turners Workshop Area: - Maintenance of machinery and equipment Notes: - All machinery and equipment is offered “as is, where is.” - All Goodyear-specific data has been removed, and the software has been reset to factory settings.