Used Ism 4 for sale (58,059)

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4/1 Folding Machine Machine configured for folding up to 16 pages. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – 1 electronic knife – Mobile delivery Inverter-controlled folding speed adjustment Bjdpfx Aey Tu Nasfmewp Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. The machine is in good condition and ready for operation.

Condition: good (used), Polar Mohr LW 1000-4 Paper Stack Lift This device is in excellent technical and visual condition. This is the current production model. Hydraulic drive. 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Bodpfoy Tu E Uox Afmewp Load capacity: 1000 kg. Pallet dimensions: 1200 x 800

Condition: used, functionality: fully functional, machine/vehicle number: UFS/200DTFVRE480 / UFS 1078, Year of construction: 1999, operating hours: 1,900 h, load capacity: 2,000 kg, lifting height: 4,800 mm, fuel type: electric, battery weight: 1,000 kg, Equipment: pallet forks, Due to business closure, being sold for immediate sale. The electric forklift is in good condition and was used exclusively indoors on smooth concrete floors. The tires are in good condition. The overall condition is acceptable. Total weight (without battery) is 3.25 tons, the battery weighs approximately 1.0 ton. Charger included. No transport included. Bsdoza A Ehspfx Afmjwp

Condition: excellent (used), Year of construction: 2023, We offer this very good Format-4 tempora F600 edgebander, year of construction 2023. Bedpfx Afjzak D Semewp If you have any questions or need more information, feel free to send us a message or give us a call. Dobrý den, prodame olepovačku Format4 Tempora F600 PUR + Eva. Stroj z roku 2023, nalepeno cca 60km hran. Vybaven glue boxem pro lepení pur technologií. Dále 2x vanicka pro rychlou výměnu barvy lepidla Pur/eva. Bližší info v odkaze zde:

Condition: new, Welding electrode for contract welding Manufacturer: Duramit W4 Bsdpfx Aohhyitsfmewp Material: 1.2567 Diameter: 6 mm Length: 450 mm 40 pieces per package 6 packages available 95 euros per package

Condition: new, Welding electrode for contract welding Manufacturer: Duramit W4 Material: 1.2567 Diameter: 3.25 mm Length: 350 mm 120 pieces per package 2 packages available Bsdpfxjhhyizs Afmowp 95 euros per package

Condition: excellent (used), Year of construction: 2011, 1. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2011 Output: 110 - 1250 kW. Connection pressure: 15-500 mbar. Bwjdpfx Afjzaa Uasmop 2. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2005 Output: 120 - 1250 kW. Connection pressure: 15-500 mbar.

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Bwodpfx Aforrh T Ajmsp Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, mileage: 272,600 km, power: 260 kW (353.50 HP), first registration: 08/2015, fuel type: diesel, number of seats: 41, gearing type: mechanical, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Our internal number: 1014 * NEW PAINT in 05/2026 * MB Tourismo RH K * Vehicle registered and in operation - mileage and condition may therefore vary. * CLUTCH and dual-mass flywheel replaced in September 2025 * In September 2023, over EUR 24,000 net was invested in this vehicle, including, among other things, through Evobus, with a new turbocharger, new retarder, air conditioning compressor serviced, all V-belts and idler/tensioner pulleys replaced, transmission sealed, oil pan sealed, oil change, etc. * First registered 08/2015 * First owner + Will registration * Mileage - original * 6-speed manual transmission * 39+1+1 seats / adjustable sideways and rearwards * Three-point seat belts * Tables on the back of the seats * DVD and monitor * TINTED GLASS * Retarder * Cruise control * Distance control cruise control * ABS, ESP, EBS * Fog lights * Immobilizer * LED lighting * Brake assist * Lane keeping assist * Rear view camera * Toilet * On-board kitchen * Nozzle ventilation * Reading lights * Ski box compartment * Trailer hitch * Central locking * Raise/lower * USB connection * NEW TIRES ON FRONT AND REAR AXLE in August 2025 * Vehicle length: 10.32 / 2.55 / 3.37 m+ * etc. * PICK-UP PRICE - FINAL PRICE! * All information without guarantee * Subject to prior sale * We refer to our terms and conditions Bedpfxey U A S Ss Afmowp

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4 Folding Machine Machine in very good condition, ready for operation. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – Mobile delivery Infinitely variable folding speed control via inverter Cassette noise reduction Bjdpfxsy Sd U Aj Afmjwp Compressor included Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. Made in Germany.

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Coolant device Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! Bwodpfx Ajq Ulucjfmop THE MACHINE IS IN GOOD CONDITION !!!

Condition: used, functionality: fully functional, mileage: 629,000 km, first registration: 10/2011, fuel type: diesel, empty load weight: 11,700 kg, maximum load weight: 26,000 kg, tire condition: 70 %, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 500 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 8,310 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, differential lock, fog lights, power mirror, trailer coupling, truck registration, Mercedes Benz Actros 2541 Roll-off tipper PRISMAG SA26L 6x2 Front leaf suspension - rear air suspension Differential lock Automatic transmission GVW 26,000 kg – payload 14,300 kg Trailer coupling (permissible gross combination weight 44,000 kg) Euro 5 Total vehicle length: 8.31 m Wheelbase: 4.20 m ABS 3rd axle steerable and height-adjustable Tyres 70% 500L tank Bwedpfx Afsyfg Rrjmep Fog lights Sun visor Central locking Air conditioning Air-suspended driver’s seat Electric windows and exterior mirrors All information provided without guarantee / errors and omissions excepted.

Condition: excellent (used), Year of construction: 2020, 1. WEISHAUPT WM-G10/4-A, (with gas duct) - Output: 100-1100 kW - Design: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2015 (1 unit), 2013 (2 units available) 3. WEISHAUPT WM-G10/2-A Design: ZM-LN Output: 75-630 kW Year of manufacture: 2021 Bsdpowgyrtofx Afmswp 4. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 125-900 kW - Design: ZM-LN - Year of manufacture: 2011 5. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2011 6. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2009

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Bjdpoywpahsfx Afmjwp Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: good (used), 4 x Bonfiglioli wind turbine gearbox JB00001227 SN B6201603697 Bwodpfx Afowg E Utemjp

Condition: used, Year of construction: 2015, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of axes: 4, number of slots in tool magazine: 16, Equipment: CE marking, For sale is a well-equipped CNC machining center, FORMAT-4 profit H10 22.32, manufactured in 2015. This machine is perfectly suited for precise processing of wood, MDF, plastics, and sheet materials. The FORMAT-4 H10 stands out for its high traverse speeds and robust construction. Particularly noteworthy are the powerful 10 kW HSK-F63 milling spindle, the 360° C-axis, and a total of 16 tool positions. Technical Data * Manufacturer: FORMAT-4 * Model: profit H10 22.32 * Year of manufacture: 2015 * Type: CNC machining center Bsdpfjy Smi Aox Afmjwp Working Area * X axis: 3,120 mm * Y axis: 2,160 mm * Z axis: 105 mm Traverse Paths * X: 4,050 mm * Y: 2,560 mm * Z: 280 mm Traverse Speed * X/Y: 100 m/min * Z: 30 m/min Milling Spindle * 10 kW HSK-F63 milling spindle * Speed range: 1,000 – 24,000 rpm * Clockwise/counterclockwise rotation * Ceramic bearings * Air-cooled Tool Changer * 2 tool changers with a total of 16 tool positions * HSK-F63 interface * Tool slots on the machine frame and mounted laterally Additional Units * C-axis 0–360° Vacuum/Table * Matrix/grid table * 2 vacuum pumps, each 250 m³/h * Two rows of stops Control/Software * FORMAT-4 H10 control system * WoodFlash software * DXF import * 3D graphic display * Parametric programming * Tool database for up to 500 tools * Mobile operator console * Handheld terminal Additional Equipment * Automatic central lubrication * UPS for the control computer * Network/internet preparation * Central extraction system * Preparation for drilling head * Operator tools and documentation included Condition: Machine from ongoing production. Well-maintained condition. Inspection by appointment possible.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,000 kg, load capacity per storage section: 3,000 kg, total length: 34,000 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, pallet spaces: 144 euro pallets, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 34,000 mm, support length: 2,700 mm, 4 rows of pallet racks (4 x M45112711-2) each 8.5 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 3 beam levels, shelf load capacity 3,000 kg. - 16 frames (RM4511 - RAL5019) - 32 footplates, shims, mounting hardware - 64 floor anchors (ZZBA1210) - 72 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Bsdpfx Afoy R R R Iemjwp Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction site/assembly location - Unloading from truck to be carried out by the buyer with their own lifting equipment. - Deliveries possible throughout the entire territory of the Federal Republic of Germany; except islands! Deliveries to EU countries are possible by separate arrangement.

Condition: excellent (used), Year of construction: 2025, Format 4 Kappa 450 x-Motion 2-axis control, height and tilt adjustment Technical data: - Cutting length: 2800 mm - Cutting width: 1300 mm - Cutting height: 155 mm - Max. saw blade Ø 450 mm - X-motion control - Angle scale with length compensation - Extractable Ø 120 mm - Motor power: 10 kW Bwjdpfxsy Rp D Te Afmsp - Year of construction: 2025 Duplex mitre fence

Condition: used, Year of construction: 2013, machine/vehicle number: CA47, Used capsuling equipment Nortan Prisma 4T 6000 bph This used capsuling equipment was rebuilt in 2013 as a new, and shrink-wrap capsule type. Safeguards are available for this Used rotary capsuling machine There are three different sets of bottle equipment available. The machine has been checked before dismantling. It is in good working condition and has been in operation until September 2021. It has automatic storage for the shrink capsules. A photocell connects the components to the main structure, which releases capsules for incoming bottles, completely automatically and synchronized. Despite its simplicity, maintenance is very important for this capsuling machine. The thermal heads and their gaskets, need to be checked carefully. The electrical panel is in order and complete with all cables and PLC, manuals, and wiring diagrams. The floor space required for this used capsuling machine square meters 4,50. Max. speed is 6,000 b\h. The Used rotary capsuling machine, has a whole set of stars, augers, and counter-stars to convey the bottle correctly. The direction of entry is from left to right and therefore clockwise. This machine is specific for glass containers. It can handle formats ranging from 0.50 L, to 0.75 L up to the size of 1 L. Bjdpfevguvzex Afmewp Nortan is one of the most common brands in circulation, it is therefore easy to find any spare parts for the machine.

Year of construction: 2023, operating hours: 770 h, condition: ready for operation (used), Wood production line manufactured in 2023. This ISM ATM-01 is a custom-made automatic production line designed for the fully automated manufacturing of wooden garden screens from individual planks. It features automatic discharge and stacking of finished screens, tilting stacks for efficient processing, and is adjustable for five different screen types. If you are looking to get high-quality wood processing capabilities, consider the ISM ATM-01 machine we have for sale. Contact us for further details. • Type: Automatic production line for wooden garden screens (custom-made) • Process: Manual loading of planks and intermediate slats into magazines; fully automatic production thereafter • Features: • Automatic discharge and stacking of finished screens • Tilting stacks for efficient processing • Adjustable for 5 different screen types • Last maintenance: June 2025 • Documentation: User manual, spare parts list, technical drawings, CE dossier Bwodpfxey Am Aws Afmjp

Condition: ready for operation (used), Year of construction: 2013, operating hours: 42,000 h, functionality: fully functional, overall weight: 3,315 kg, total length: 3,200 mm, total width: 1,630 mm, total height: 1,960 mm, motor manufacturer: Siemens, power: 236 kW (320.87 HP), volume flow: 3,013 m³/h, operating pressure: 4 bar, noise level: 77 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 1 unit Low-Pressure Screw Compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3,013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Bjdpfx Aeywr Tksfmewp Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3,630 rpm Speed control: with integrated frequency converter Cooling: Water-cooled with stainless steel shell-and-tube heat exchanger FUNKE 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Dimensions Length: 3,200 mm Width: 1,630 mm Height: 1,960 mm Weight: 3,315 kg Also available: Cyclone Afterseparator Manufacturer: BZ Zyklone Model: 175 (stainless steel) Condensate drain Bekomat Shell-and-Tube Heat Exchanger Manufacturer: Funke Model: A100 805-6-1Pass Material: Stainless steel 2x Rubber Expansion Joints 1x Intermediate Flap Valve DN 150 with Auma Actuator SG 05.1 F07 1x Cooling Water Control Valve Samson 3274 DN 50 PN 16 1x Steel Pipe DN 150 with 2x 90° bends

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany Bwodped Tbbdjfx Afmep - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) Bwedpfx Afjfdkb Temep - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Bjdpfxod Tqalo Afmewp Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted finish (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, 2.56 m high, with base section, 1.0 m usable depth (1.2 m overall depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Fastening material (screws, nuts, and washers) (*No paint damage!) Net price for self-collection: €1,490.00 plus VAT. Delivery possible for an extra charge. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Rack height 2,560 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery time - Self-collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notification before delivery. The material is packed in a way that allows for easy unloading. Bodpfx Afeguk A Hemjwp The subfloor must be made of concrete, level, and suitable for dowels, and must be able to bear the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the floor, as well as any necessary official permits. The rack uprights must be anchored in the floor on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm from the top edge of the upright on the uppermost storage level.