Used Injection Moulding Machines for sale (64,260)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 62,073 h, General Data Measurements width 2200 mm Measurements depth 8500 mm Measurements height 2800 mm Machine weight 2759 kg Injection Unit Screw diameter 70 mm Clamping Unit Clamping force 4500 kN Crsdpfxexqh Uzj Ab Tsk This SUMITOMO SHI DEMAG El-Exis SP 450/920-2500 was manufactured in 2017. A robust electrical injection moulding machine, it features a screw diameter of 70 mm, a clamping force of 4,500 kN, and tiebar spacing of 920 mm. Despite its extensive use, it remains operational but requires attention due to a knee lever issue. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 450/920-2500 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2003, operating hours: 67,092 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, displacement volume: 5,655 cm³, ejector force: 118,000 N, ejector stroke: 300 mm, plate length: 1,690 mm, plate width: 1,960 mm, total height: 2,500 mm, overall weight: 76,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503007 manufacturer: BATTENFELD type: HM 10000-9200 controller: UNILOG B4 year of construction: 2003 Credpfx Absxqc Ago Tsk operation hours: 67092 h clamping force: 10000 kN distance between tie-bars h x v: 1120 x 1400 mm size of mould plates h x v: 1960 x 1690 mm min. mould height: 550 mm max. mould height: 1020 mm max. open daylight: 2120 mm opening stroke: 1100 mm screw diameter: 120 mm swept volume: 5655 ccm injection pressure: 1632 bar equipment included: screen text german complact flash drive core pulling hydraulically 4x Anti vibration mounts electric interface for handling units according to Euromap 12 interface for temperature control units increased oil cooler mould heating 16x measures of machine l x w x h: 11.6m x 2.9m x 2.5m total weight: 76500KG

Condition: used, Year of construction: 2001, Technical details: screw diameter: 30 mm closing force max.: 2000/ bei 175 bar kN opening force: 10 t screw revolutions per minute : 100 U/min control: FA-Inject 2000SIJECT OP37 system pressure: 175 bar injection pressure max.: 1600 bar injection volume max.: 800 cm³ closing speed: 200 mm/min ejection stroke: 150 mm force of ejector: 120 kN opening stroke: 550 mm daylight: 700 mm total power requirement: 36,5 kW weight of the machine ca.: 6,0 t dimension machine xH: 3,0x1,9x3,9 m dimensions electric cabinet LxWxH: 0,8x0,6x2,15 m Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume hydraulics 110 l, heating and cooling method thermal oil circulation system, nozzles stroke 20mm - nozzle type: single nozzle, heating capacity per heating plate: 8,1 kW, heating plate size 600x500mm, heating plate temperature=250°C Crjdpfju Nu N Rox Ab Tek The machine is not connected. We sell the machine as described and as is *

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Crodpextmp Njfx Ab Tek

Year of construction: 2016, condition: ready for operation (used), An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible. Cjdjxrf Nlepfx Ab Terk

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 61029386, clamping force: 2,000 kN, screw diameter: 70 mm, Equipment: documentation/manual, KraussMaffei 200/1400 CX POL BMC injection molding machine for sale in very good condition. Few operating hours, manufactured in 2017, commissioned in 2018. MC6 control. For details, please contact us by email! Thank you! Credpfx Aswz Iv Aob Tsk

Condition: ready for operation (used), Year of construction: 2017, operating hours: 62,311 h, General Data Measurements width 18000 mm Measurements depth 7000 mm Measurements height 2500 mm Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 3000 kN This SUMITOMO SHI DEMAG El-Exis SP 300/720-920 was manufactured in 2017. A robust electrical injection moulding machine, it features a screw diameter of 45 mm, a clamping force of 3,000 kN, and tiebar spacing of 720 mm. With 62,311 operating hours and 50,971,553 cycles, consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 300/720-920 electrical injection moulding machine. Contact us for more information. Application Types Crodpsxqiafsfx Ab Tek Injection Moulding

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Codpfeukn S Hsx Ab Tjrk Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: new, Year of construction: 2025, functionality: fully functional, clamping force: 6 kN, screw diameter: 14 mm, injection pressure: 2,023 bar, total length: 1,200 mm, total width: 743 mm, total height: 690 mm, overall weight: 315 kg, power: 4.1 kW (5.57 HP), input voltage: 400 V, warranty duration: 24 months, Equipment: documentation/manual, BOY XXS SP14 (ø14 mm Screw) Discover precision and performance with the BOY XXS SP14, equipped with a ø14 mm screw. Ideal for high-accuracy applications in compact production environments. Included Features: Credpfx Ajwi Hgisb Tok - 4 freely programmable inputs and outputs for maximum flexibility - EU67 interface for seamless robot integration - Comprehensive interface package including Network/Ethernet FTP, VNC, OPC-UA, EM77, and EM82 – license fee included - Mobile machine table with practical drawer for easy access and organization - Durable packaging in a heat-treated wooden crate, ensuring safe and compliant transport - Machines have never been unpacked and have 0 operating hours - Full Warranty is included NOTE: If interested there are two available machines of this kind (new and unpacked) Reason for selling: Purchased for a project that was cancelled. Sold and delivered by Earfab ApS. (DK) Prices are excluding VAT. and Taxes

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Cjdjxrf Nrepfx Ab Tork

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Measurements height 2410 cm Csdpfxexp Snpj Ab Terk Machine weight 25340 kg This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Application Types Injection Moulding

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Measurements height 2410 Machine weight 26210 kg This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Application Types Crjdpfxoxp Sn As Ab Tsk Injection Moulding

Condition: ready for operation (used), Year of construction: 2018, operating hours: 40,365 h, General Data Machine weight 22000 kg Injection Unit Screw diameter 100 mm Clamping Unit Clamping force 2500 kN Opening stroke 650 mm Max open daylight 1500 mm Distance between bars 630 x 630 mm Ejector stroke 200 mm Ejector force for / back 60 kN Csdpfxsxpyuwe Ab Tsrk Additional Equipment Injection unit: 13000 kg Clamping unit: 9000 kg only hot runner is includeed This Otto Systems eKW 250/5500 PET was manufactured in 2018. It features a clamping force of 2500 kN, a screw diameter of 100 mm, and a maximum injection speed of 250 mm/s. The machine has a dry cycle time of 1.6 seconds and a total weight of 22000 kg. If you are looking to get high-quality injection molding capabilities, consider the Otto Systems eKW 250/5500 PET machine we have for sale. Contact us for more information. Application Types Injection Moulding

Year of construction: 2011, condition: ready for operation (used), General Data Measurements width 1.42 m Csdpfexpyp Uex Ab Tsrk Measurements depth 4.36 m Measurements height 1.95 m Machine weight 4700 kg This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter of 18 to 32 mm and a clamp force of 750 kN. The machine dimensions are 4.36 × 1.42 × 1.95 m, and it weighs 4700 kg. If you are looking to get high-quality injection moulding capabilities, consider the Milacron ELEKTRON 75 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 80 mm Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Clamping Unit Crsdpfoxpyt Hsx Ab Tok Clamping force 420 kN Ejector stroke 230 mm Additional Equipment SEPRO Robot Included This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, General Data Measurements width 2200 mm Measurements depth 7200 mm Measurements height 2400 mm Machine weight 17700 kg Injection Unit Screw diameter 60 mm Shot weight 723 g/hp max Injection pressure 2500 bar max Clamping Unit Clamping force 3200 kN Opening stroke 700 mm max Distance between bars 720 mm x 720 mm Mould height min 300 mm Size of mold platens 1040 mm x 1040 mm Additional Equipment The Wittmann robot is not included Conveyor belt is included, protective housing only for the electrical components No other peripherals are included. This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Application Types Injection Moulding Csdpfx Aoxpkqieb Tork

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. Crsdpfjxpkuzex Ab Tek Application Types Injection Moulding

Year of construction: 2002, condition: ready for operation (used), Injection Unit Screw diameter 120 mm Injection pressure 1172 bar This Husky GL 300PET P100/110 E12O was manufactured in 2002. It features a distance between tie bars of 720 × 720 mm, a maximum mold stroke of 700 mm, and a screw diameter of 120 mm. The machine offers a screw L/D ratio of 25.0:1 and an injection pressure of 1172 bar. If you are looking to get high quality molding capabilities consider the Husky GL 300PET P100/110 E12O machine we have for sale. Contact us for more information. Crsdpfsxn Uyrjx Ab Tjk Application Types Injection Moulding

Year of construction: 2007, operating hours: 88,893 h, condition: ready for operation (used), Control Unit Brand HAITIAN This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Credoxn Uxhopfx Ab Tjk

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1900 mm Measurements depth 6600 mm Measurements height 2400 mm Machine weight 14900 kg Injection Unit Screw diameter 50 mm Shot weight 482 g Stroke volume 530 cm3 Injection pressure 2426 bar Adjustable heating zones 5 Nozzle pressure 110 kN Clamping Unit Clamping force 2500 kN Opening stroke 670 mm Credpfxexnd Sqe Ab Tjk Max open daylight 1380 mm Mould height min 330 mm Mould height max 710 mm Ejector stroke 200 mm Ejector force for / back 81 kN Media Pump drive power 30 kW Oil tank 550 L This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Year of construction: 2021, operating hours: 5,797 h, condition: ready for operation (used), This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Application Types Codpfxsxnd Sko Ab Tjrk Injection Moulding

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Csdpfjxmbv Dox Ab Tjrk

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Application Types Crsdpfoxmbwbex Ab Tek Injection Moulding

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 1850 Measurements depth 5800 mm Measurements height 2200 mm Machine weight 9400 kg Injection Unit Screw diameter 45 / 48 / 50 mm Shot weight 229 / 289 / 357 g Stroke volume 286 / 318 / 393 cm³ Injection pressure 2494 / 1970 / 1878 bar Screw speed 270 rpm Clamping Unit Clamping force 1800 kN Opening stroke 540 mm Max open daylight 1230 mm Mould height min 300 mm Mould height max 790 mm Ejector stroke 200 mm Ejector force for / back 49 kN This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine. Crodpfx Ajxl H E Uob Tek Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2016, operating hours: 24,285 h, General Data Machine weight 4400 kg Control Unit Brand FANUC Injection Unit Screw diameter 36 mm Clamping Unit Clamping force 150-180 This FANUC Roboshot S150iA was manufactured in 2016. It is an electrical injection moulding machine featuring a screw diameter of 36mm and a closing force between 150-180 tons. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding Credpfxexllk Ae Ab Tsk