Used Indigo 3050 for sale (382)

Year of construction: 1989, condition: good (used), Stop, depth stop, length stop for press brake, bending machine, guillotine shear... -Spare part: Stop bar comes from a Dorsten BBM press brake, type: APE80-3050 -Servo motor: Manufacturer Stromag -Servo motor: Type: FGP311/005-40AA -Stop ruler: 2630 mm -Length (unit of measurement) approx.: 800 mm -Dimensions 2630/800/H340 mm Hodegrzu Uopfx Ag Isfg -Weight 480 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 37,364 h, This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 6,000 W CO₂ laser and a generous working area of 3,000 × 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO₂ laser cutting machine we have for sale. Contact us for further details. • Laser Power: 6000 W • Laser Type: CO₂ • Supply Voltage: 400 V / 50 Hz • Connected Load: 109 kVA • Control Voltage: 24 V • Required Fuse Protection: 3 × 160 A • Compressed Air Connection: 7–10 bar Hedpfx Ajynlhnog Iofg • Nitrogen Connection (N₂): 30 bar • Oxygen Connection (O₂): 20 bar • Working Area (Sheet Format): 3000 × 1500 mm

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 3/3320, cutting length (max.): 3,050 mm, Cutting length 3050 mm Rear stop Hsdpoyv Uv Sefx Ag Iofg Pneumatic pressure beam

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device Hfjdpfxsxacfge Ag Ieg * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON Hfsdpfx Agegu N Alo Iog 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: new, PRICE: 2850 EUR Dough mixer Hodpfxjuu Evws Ag Iofg Container volume: 80 liters Dough mixers are intended for professional use in the bakery and catering industry They are used to prepare primarily dough, but they can also be used to prepare other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger amounts of dough continuously They consist of a container for ingredients and a mixing tool (spiral) Features: Flour capacity: 30 kg Test capacity: 50 kg Container capacity: 80 liters Mixing speed: 125/250 rpm Bowl speed: 12.5/25 rpm Voltage: 380V 50Hz Electricity: 3.5kW Machine size: 950x590x1100 mm Weight: 290 kg

Condition: like new (used), 50 linear meters pallet racking Nedcon New equipment, see pictures! Hfedpfxjfkgq So Ag Ijg A premium racking system from the renowned manufacturer NEDCON—a subsidiary of Voestalpine AG, headquartered in the Netherlands. Height: 7 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam load capacity per level: 3050 kg Negotiable price: €10,950 net ex stock The offer includes: + 19 pre-assembled frames, depth 110 cm, height 7 m + 144 beams, length 2.7 m, 3050 kg load capacity/level + 288 safety locking pins + 38 concrete anchors Load capacity signs, documentation, etc. are included. Additional accessories can be found in our accessories catalogue. Frames painted blue RAL 5019, bracing galvanized. Heights from 2 m to 7 m in stock. Bay load: 12 tonnes, higher bay loads available on request. Beams painted orange RAL 2008. Beam lengths in stock: 1.85 m, 2.7 m, 3.3 m, 3.6 m. Items are in stock. Transport and assembly available on request. Different configurations available on request. Over 2,000 meters in stock. Viewing possible at any time by appointment. Further information upon request. Constantly over 5,000 linear meters of pallet racking from various manufacturers available from stock. (Changes and errors in technical data, specifications, and prices as well as interim sale reserved! Please see our Terms and Conditions; all prices excl. VAT ex stock.) Purchase / Sale We are constantly looking for or offering numerous items from various sectors – broom-clean company clearances – business liquidations – Fast – flexible – efficient! We also clear or dispose of items on behalf of insolvency administrators. Send us a brief description and we will get back to you promptly. To visit our website, please click on our logo!

Condition: like new (used), 40 linear meters Pallet Rack Nedcon New, see pictures! A top-quality racking system from the major manufacturer NEDCON – a subsidiary of Voestalpine AG, headquartered in the Netherlands. Height: 5.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam capacity per level: 3050 kg Negotiable price: €6,990 net ex stock Offer includes: + 15 pre-assembled frames, depth 110 cm, height 5.5 m + 84 beams, length 2.7 m, load capacity 3050 kg per level + 168 lock-in safety clips + 30 concrete anchors Load capacity signage and documentation included as standard. Additional accessories available in the accessories catalogue. Frames blue RAL 5019, bracings galvanized. Heights from 2 m to 7 m in stock. Field load capacity up to 12 tons; higher field loads on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Hodpfxofkgpwj Ag Isfg Goods are in stock. Transport and installation available on request. Other configurations available on request. Over 2,000 meters in stock. Inspection possible by appointment at any time. Further information available on request. Constant stock of over 5,000 linear meters pallet racking from various manufacturers. (Subject to changes and errors in technical data, specifications, and prices. Intermediate sale reserved! See our terms and conditions. All prices excl. VAT, ex stock.) Purchase / Sale: We are continuously searching for and offering many items from various sectors – Broom-clean company clearances – Company liquidations – Fast – flexible – efficient! – We also clear and/or dispose for insolvency administrators. Send us a brief enquiry, and we will contact you promptly. To visit our website, please click on our logo!

Condition: like new (used), 25 linear meters Pallet Racking Nedcon Brand new, see pictures! A top-quality racking system from the major manufacturer NEDCON—subsidiary of Voestalpine AG, headquartered in the Netherlands. Height: 3.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam load capacity: 3050 kg per level Negotiable price: €3,290,-- net ex stock Offer includes: Hfjdpfxsfi U Aio Ag Isg + 10 pre-assembled frames, depth 110 cm, height 3.5 m + 36 beams, length 2.7 m, 3050 kg load capacity per level + 72 safety clips + 20 concrete anchors Load capacity signs, documents, etc. are of course included. You can find additional accessories in the accessories catalogue. Frames in blue RAL 5019, bracing galvanized. Heights from 2 m to 7 m available from stock. Bay load capacity 12 tons, higher bay loads available on request. Beams in orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods available from stock. Transport and assembly available on request. Other configurations available on request. Over 2000 meters available. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5000 linear meters of pallet racking systems from various manufacturers in stock. (Specifications, details, and prices as well as prior sale subject to change and errors excepted! Please refer to our Terms and Conditions. All prices excl. VAT, ex stock.) Purchase / Sale: We are constantly looking for or offering a wide range of items from various sectors: - broom-clean business clearances - Company liquidations - Fast - flexible - efficient! We also clear out or dispose of goods for insolvency administrators. Write to us with a few details and we will get back to you promptly. To visit our website, please click on our logo!

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 3050-750-600 RA1694 Technical data: Conveying length (NL): 3050 mm Framework width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Hfjdpfx Agjxnthzs Ijg Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2011, functionality: fully functional, HP Indigo 7500 Printing Press. Year 2011 In full working order. (Still in production) Hfodsyk Iwdepfx Ag Iog Includes HP RIP and Chiller unit. Counter impressions (See Photo) Video can be sent on request. Will be disconnected and made ready for loading by HP engineer.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,880 h, load capacity: 5,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 130 kW (176.75 HP), fork length: 1,200 mm, empty load weight: 21,810 kg, total length: 7,820 mm, drive type: Diesel, construction width: 2,490 mm, Rotating telehandler Load centre: 600 Mast type: Telescopic Transmission: Hydrostatic Technical condition: Good Front tyres type: Pneumatic Front tyres size: 445 / 65 R22.5 Front tyres condition: 60 - 80% Rear tyres type: Pneumatic Rear tyres size: 445 / 65 R22.5 Rear tyres condition: 60 - 80% Hfsdpfxex Ixn Nj Ag Ieg Third hydraulic valve, Remote control on request, supplied with bucket or light material bucket (1000 or 1500 litre), swivelling man basket.

Condition: new, empty load weight: 1,101 kg, maximum load weight: 2,399 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,050 mm, loading space width: 1,790 mm, loading space height: 190 mm, loading space volume: 1.5 m³, color: silver, construction height: 1,450 mm, working width: 2,380 mm, Hydraulics, automatic reverse drive, NEW MODEL incl. 150cm long drive-on ramp, hot-dip galvanizing, parabolic suspension, aluminium floor, *immediately available * NEW MODEL incl. 150cm long drive-on ramp, parabolic suspension, aluminium floor 150cm long drive-on ramp, parabolic suspension, aluminum floor TECHNICAL DATA - Make: Hapert Trailers - Model: Indigo LF-3 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 405 x 179 x 19 cm - External dimensions (LxWxH): 589 x 238 x 145 cm - Loading height of floor: 42 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,101 kg - Payload: 2,399 kg - Chassis: Low loader (wheels next to the body) - Tires: 195/50R13C - Chassis: KNOTT parabolic suspension + 100 km/h - Support wheel: Yes, automatic - 100 km/h approval: YES EQUIPMENT: - Brake: Yes - Number of axles: 3 - Floor: Aluminum floor - Drop sides: Steel drop sides - Drop side height: 19 cm - Locks: Eccentric locks - Number of pallet spaces: 5 - Multifunctional vehicle: No - Tipping / lowering function: Without - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, square tube - Mudguards: Steel mudguards - Spare wheel: Optional, can be retrofitted - Bucket storage: Optional, can be retrofitted - Superstructures / attachments: Optional, attachable - Ramp chute: No - Ramps/ramp flap: Yes - Type of ramp: Continuous tailgate - Load ramps: - - Drive-on angle: approx. 20 - Supports: Integrated in tailgate - Lashing eyes: 10 - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents DESCRIPTION - 3x parabolic spring axle each 1. hot-dip galvanized - steel drive-on flap standing on shaft 150cm - sturdy eccentric locks - corner stanchions with locks for tailgate can be removed without tools - insertion option at all 4 corners for tarpaulin frames, grid attachment, robust support feet on the drive-on flap - lifting aid for drive-on flap - very low chassis for low drive-on angle - optionally with bucket tray - 10x lashing eyelets recessed into the side of the frame profile (1000dAN/kg) TÜV certified - perforated rail on three sides 6cm (Combi Protect Rail) can also be used with locking bars and lashing straps - round holes 25mm, Slotted holes 54x25mm - Parabolic spring axle from KNOTT - Automatic reverse drive - KNOTT overrun device and parking brake - Very sturdy bolted V-drawbar REINFORCED - 13-pin plug - Return travel license plug - reversing lights - large safety lights - rear lane departure lights - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved. Hfedou Hrl Rjpfx Ag Isg

Condition: new, The vertical shelving system is a sophisticated storage solution for the upright storage of long goods such as roof battens, skirting boards, pipes, or beams. It was specially developed for both commercial and private use and offers a particularly space-saving alternative to traditional horizontal storage. Thanks to the vertical storage, only a minimal footprint is required – ideal for confined storage areas or self-service areas in retail. The scope of delivery includes: 1x Vertical Shelving System, new Shelf height: approx. 3,050 mm Shelf depth: approx. 1,000 mm Shelf length: approx. 2,360 mm Overhang: approx. 500 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Hjdpjwd Srmofx Ag Isfg This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Year of construction: 2003, condition: ready for operation (used), Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible. Hjdpfxexaph Uo Ag Iofg

Condition: used, power: 129 kW (175.39 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2021, operating hours: 2,155 h, Equipment: all wheel drive, Drive: Wheel Empty weight: 21.810 kg Chassis type: rigid Lifting capacity: 4.999 kg Rental currency: EUR Please contact KEY-TEC Sales for more information Hodpsyhviiofx Ag Iofg

Condition: new, empty load weight: 860 kg, maximum load weight: 2,640 kg, overall weight: 3,500 kg, loading space length: 3,550 mm, loading space width: 200 mm, loading space height: 1,690 mm, tire size: 195/50r13c, *Low loader *construction machinery transporter tandem *for construction machinery, excavators, platforms, scissor lifts and many other vehicles. Hapert builds extremely stable *car trailers* such as this INDIGO LF-2 355x169cm. The *construction machinery trailer* is easy to load via a very stable lattice access flap. An absolute *universal trailer* not only for construction equipment but also for transporting lawn mowers, tractors, bulk goods and small vehicles. Full-length and accessible wheel arches make it easier to get out of a wheel loader. Here, the driver no longer damages the mudguard of the *car trailer*. The *machine transporter* is equipped with a stable lattice flap, parabolic suspension, automatic support wheel, accessible wheel arches, extremely stable welded and hot-dip galvanized frame and V-drawbar. Hsdpfsn E Rm Eex Ag Iefg We also offer accessories for machine transport trailers such as bucket storage, aluminum floor, tarpaulin with frame, lashing straps and anti-theft devices at a reasonable price.

Condition: used, The resonator of a Trumpf laser resonator is for sale here in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Trumpf • Laser system: L-3050 (6kW, built in 2005) Hsdpfx Ageyfnb Sj Ijfg Shipping available on request (also internationally) You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 3,050 mm, table width: 1,550 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, safety light barrier, skyCUBE XLs class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XLs class, produced by PFEIFER technology in Saxony, Germany, is engineered for your professional cutting tasks. It combines advanced productivity with economic efficiency and precision. The machine housing is manufactured from welded and bolted steel construction, specifically designed for industrial and commercial applications. The drive system developed by PFEIFER technology ensures both precision and high repeat accuracy. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, providing you with maximum safety. The ergonomic design with a pull-out worktable facilitates easy loading of the machine. Drawers in the lower section collect cutting residues efficiently. The skyCUBE laser software with file import capability generates precise laser cutting geometries for your requirements. Optimize your cutting quality and speed—even with thick materials—thanks to the 6kW laser power, including when using compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Monitor your production with ease: the large front doors allow convenient access to the entire working area. Position the operator console wherever you prefer. It is mobile, providing optimal visibility of the cutting process at all times. Naturally, your safety is the highest priority when operating the skyCUBE laser! The skyCUBE XLs is a Class 1 laser system. There is no risk of coming into contact with laser beam emissions or reflections during operation. Hfedpfsw Ebzmsx Ag Isg With all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass panels and a perfectly shielded cutting area reliably protect you from laser radiation risks, while an independent safety system enables loading without interrupting production. Select the laser power that best suits your requirements; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a factory-new laser machine from our own production) Maximum dimensions (L × W × H): 2310 × 8505 × 2505 mm / Laser machine: 4.0 T Power supply: depends on laser source (6kW), 400V/50Hz, 3-phase / 27kW Process gas control for: oxygen / nitrogen / compressed air according to material and process

Year of construction: 2023, condition: new, Parts washer designed for cleaning HP Indigo BID print units : uses existing HP imaging oil for the cleaning process with integrated pump and filtration unit . Designed with direct input from HP digital press users to create an effective and user friendly BID cleaning system for HP presses. Tel : 00 44 7711 894733 Hfjdpfx Aelblxqsg Iog

Condition: used, power: 129 kW (175.39 HP), fuel type: diesel, color: other, axle configuration: 4x4, Year of construction: 2018, operating hours: 3,945 h, Equipment: all wheel drive, Drive: Wheel Empty weight: 21.810 kg Chassis type: rigid Make of engine: Mercedes Hfsdpfx Aoxz Nxieg Iog Lifting capacity: 4.999 kg Top speed: 40 km/h Emission level: Stage IV / Tier IV final Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: good (used), fuel type: diesel, lifting height: 30,000 mm, mast type: telescopic, Year of construction: 2018, operating hours: 3,280 h, Year of manufacture: 2018 Model year: 2018 Empty weight: 21.810 kg Carrying capacity: 5.000 kg GVW: 26.810 kg Lifting capacity: 5.000 kg CE mark: yes Technical condition: good Visual appearance: good For Sale: Rotating Telehandler 30m / 5,000 kg – Year 2018 – Only 3,280 operating hours - AC - Forks - Remote - Winch 5t This powerful and versatile rotating telehandler is in excellent condition and ready for immediate use. Built in 2018 and with only 3,280 operating hours, this machine offers many more years of reliable performance. Ideal for construction, industrial and assembly work. Specifications ✔ Lifting height: 30 meters ✔ Lifting capacity: 5,000 kg ✔ 360° rotation ✔ 4-wheel steering for optimal maneuverability ✔ Radio remote control ✔ Hydraulic quick coupler ✔ Extendable stabilizers for maximum stability Hjdpfeyapcmex Ag Ijfg Equipment & comfort ✔ Fork carriage for versatile material handling ✔ Comfortable cab with excellent visibility ✔ Joystick control ✔ Air conditioning ✔ Parking heater – comfortable working in cold conditions Call now for more information or to schedule a viewing!

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Hodpfew S E N Tex Ag Iofg Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Condition: excellent (used), functionality: fully functional, operating hours: 58,000 h, laser power: 5,000 W, TRUMPF Trumatic L 3050 - 5 kw TECHNICAL DATA: Make TRUMPF Type Trumatic L 3050 - 5 kw Year of manufacture 2005 Working area 3,000 x 1500 x 115 mm Control Siemens Sinumerik 840 D Hfodpfxjrgaw Ho Ag Ieg Laser power 5,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 12 mm Operating hours approx. 58,000 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change cutting head device - Automatic sheet outer edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Position laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens - NEW transmitter tubes on delivery

Condition: good (used), Capacitive sensor, electronic sensor -Manufacturer: IFM -Product Type: KD-3050-BPOG Hfedpfx Ajb A E U Nsg Iog -Quantity: 4 available -Price: per piece -Weight: 0.5 kg