300 running metres of Nedcon pallet racking

300 lfm Palettenregal Nedcon H 6,5 m T 110 cm Auflast /Fach 3050 kg

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 44,000 kg, color: yellow, brakes: retarder, Year of construction: 2024, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Specially designed recovery arm with lifting eye for recovery, towing of damaged vehicles, trucks, tractor units, buses, trailers, etc. Full hydraulic system.3.Paint HDRV (STANDARD) IMMEDIATELY AVAILABLE STORAGE BOXES (inside): yellow RAL 1032 STORAGE BOXES (outside): yellow RAL 1032 LIFTING EYE: black, U-TEXT RAL 9005 RECOVERY ARM: black, U-TEXT RAL 9005 REAR SUPPORTS: black, U-TEXT RAL 9005 COUNTERWEIGHT (front, under cab, if applicable): black, U-TEXT RAL 9005, front smooth frame (STANDARD) - hot-dip galvanized - for mounting counterweight at the front - rear part in body color gearm (STANDARD) - lifting angle 40? (Fig. HDRV 1013) - Mounting plates for main and auxiliary cable winch - Shackle 2x15000kg - Left and right side in the rear part of the arm - Space for spare wheel holder on recovery arm.6.Lifting frame (STANDARD) - Range position with respect to horizontal axis -5° / +10° - Load capacity in retracted position 20000kg - Load capacity in extended position 10000 kg - Extension 3800mm - Range up to rear rafter supports (STANDARD) - Independently controlled - Maximum width -3000mm - Rotating supports for work on asphalt and rafter extendable beam No HDRV 1013 Single extension 0 - 3000mm Maximum payload 2000 - Storage of the tank behind the driver's cab - Relocation of the air tank behind Driver's cab - Battery relocation behind the driver's cab - AdBlue tank relocation - Counterweight behind the driver's cab on the front frame (weight 100kg) - Main cable winch COME UP Bison 50, mounted on the recovery arm, pulling force 22,5kg cable winch COME UP Bison 50, mounted on the recovery arm, pulling force 22,5kg hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - Hydraulic control block on the right side (STANDARD) - On the right side, in rear connections for supplying the braking systems, transferred from the chassis - Quick release with 20 meter cable - Air pressure roller, on the left side of the body, above rear axles Electrical plug connection for trailer + trailer coupling, from the chassis Belt aid 12V/24V, cable, lever, mounted on the right side - Jump start 12V/24V, cable, lever, mounted on the left side - Camera + LCD screen in Driver's cab - Camera above cable winches + LCD screen in control box SCREEN: ? Vibration resistance: 10G Nodpfoiuwl Sox Ahvewc ? Impact resistance: 100G ? Working temperature: -30 to + 70 ° C ? CE marking ? EMC approval: activation of emergency stop switch - Radio remote control - 1 function - Made of aluminum - Holder for tools and accessories - Floor with rubber mats - Small ladder - Auxiliary ladder in box opening - Doors - Railings on storage boxes - Stainless steel - Aluminum platform, perforated, mounted on the upper part of the storage boxes - Stainless steel holder in large storage box, behind the driver's cab, for fork, hook, open storage box edges with stainless steel profile in storage box lighting package complies with the road traffic regulations - LED lighting in storage boxes - LED lighting, outside - LED light warning bar GAMET DE LUX, 1800mm - Mounting of the light warning bar on the upper part of the body - Warning light ORANGE BLTZ, 2 pieces - front mounting - Warning light ORANGE BLTZ, 2 pieces - mounting on the rear - Warning light ORANGE BLTZ, 2 pieces - mounting on the edge of the last storage box door - switch for all spotlights on

Condition: good (used), Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520mm x 720mm Min sheet size: 220mm x 220mm Min weight: 130 gsm Max grammage: 350 gsm Operating temperature: 80-145°C Max working speed: 22m/min Weight: 750 kg Power supply 380V Additionally, 6 Bar air A steel, chrome-plated cylinder with a large diameter, filled with oil for greater operational stability. Pneumatic pressure, separation and automatic feeding from a high stack. Adjustable pressing force. Expanding shaft for attaching the foil, mounted on a tilting arm. Touch panel for easy operation. Sheet straightening module. Nodpfx Ahsw Ic H Ievjwc Receiving table. Ask about the product

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Nodpfx Ashzbipehvewc Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: good (used), 10,000 pieces Inserted gratings Gratings for pallet racks galvanized Inlay grids in different sizes, mesh sizes, load-bearing bar and weight load available: Negotiation price: from € 15,-- net per m² from stock Larger quantities on request! Insertion grid Mesh width Load bearing bar Load bearing bar direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99,5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Second-hand, very good condition, see pictures. Goods are in stock. Transportation possible on request. Njdpfx Aod Hvvgjhvowc Visits possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for and offering numerous articles from various areas clean-swept premises Liquidations quick-

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers Nwodpfx Aed Hxx Aehvsc - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Condition: used, Crossbeams: 2700x120x50 mm – 63 pieces 2700x120x50 mm – 1 piece 1800x100 mm (ideal for chipboard): 1 piece Frames: 5200x1000x95 mm – 17 pieces 4600x1000x90 mm – 4 pieces 2300x1000x95 mm – 2 pieces Nwsdpfx Ahsh Izr Uevoc If you require racks or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories and are happy to support you with your planning. Additional accessories such as: Frame, corner and collision protection, push-through protections, chipboards, wire meshes, rear wall grids, and depth supports are available. Shipping: Please inquire about shipping costs, specifying your postal code, location, and the quantity of items required. Additional services: Planning, rack assembly/disassembly, purchase/sale Changes and errors in technical data, specifications and prices as well as prior sale reserved!

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 Njdpfsdt Rgvjx Ahvjwc VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 693068, overall weight: 7,300 kg, power: 30 kW (40.79 HP), Walter Helitronic Vision CNC Tool & Cutter Grinder with Pallet Loader Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Vision, s/n 693068, year 2008 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Can be viewed under power. Specifications: • Longitudinal movement (X-axis) 480 mm • Y axis vertical movement 320 mm • Z-axis transverse movement 700 mm • Rotary table swivel range C-axis +/- 200 ° • Workpiece Holder ISO 50 • Max. Workpiece diameter 320 mm • Workpiece length circumferential grinding 370 mm • Workpiece length for face machining 320 mm • Accuracy linear resolution 0.0001 mm • Radial resolution 0.0001 ° • Diameter of the spindle 100 mm • Grinding wheel mount: HSK50 • Diameter of the grinding wheel 200 mm • Grinding spindle speed 0 – 12,000 rpm., • Top performance 30 kW • Connected load 35 kW (460 V / 60 Hz) • Weight approx. 7,100 kg Nsdpfxouqzdpe Ahvjwc • Dimensions L x W x H 3649 x 2490 x 2301 mm Accessories: • Does not include wheel opening stick fixture seen in the pictures • Stepless speed control, probe, pneumatic workpiece clamping • Electrostatic mist extractor • Fire extinguishing system • Oil collecting pan, 2 grinding wheel flanges, Complete set of Manuals • Turmoil Drive Chiller • Loader Pallets: 8pcs – 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 1-1/4” • 10pcs - HSK Wheel Arbors Software: • Windows XP Pro Svc Pack 3 • Tool Studio V3.3 • The computer was upgraded & is very fast rendering tools in Tool Studio Condition: • Excellent condition, very accurate & consistent. October 2023 Y axis Complete rebuilt, Linear motor, rails, Compensation Cylinder, Festo Booster Pump done by United Grinding. • 1 Micron Filtration system was used on the machine (not included), so it’s been kept extremely clean • We can load onto a flatdeck for shipping for $1200. We can also provide shipping quotes if you would like & crating for Sea Freight shipping.

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Nedpfx Ahsfhb Tksvjwc

Condition: used, High-lift pallet truck, pedestrian stacker, manual tiller stacker LOGITRANS Type LF 1001 / 1600 Tool lifter, tool changing trolley Njdpfsdz Spmsx Ahvowc Serial No: 051E04006100 Year of manufacture: 2005 Load capacity: 1,000 kg Lifting height: 1,600 mm Fork length: 600 mm Platform size: 800 x 650 mm Overall length: 1,200 mm Overall width: 800 mm Construction height: 1,930 mm - Lifting via mechanical hydraulic pump, operated by pump movement with the steering handle - 2 lifting speeds approx. 36 manual pump strokes to maximum lifting height of 1,600 mm or approx. 10 manual pump strokes for 100 mm lift. - Movable by manual pushing - Short forks with mounted load plate for workpiece support - Stable fork carriage guide in simplex mast - Ideal for equipping machines with tools or workpieces Net weight: 198 kg Very good condition