Used Inclined Elevator for sale (2,053)

Condition: used, San Cassiano ER2 bowl lift for San Cassiano DF300 bowls including automatic bowl rotation, scraping system lifting height aprox. 220cm total height 320cm Bledpjiv Ak Hjfx Acyjp Pictures BEFORE reconditioning

Year of construction: 2025, condition: new, Capacity up to 2000 kg/h Mill motor 3,0kW Blodps Hmtdsfx Acyjp Elevator motor 0,37 kW Stepless speed regulation with frequency inverter Automatic start-stop-function for the elevator controled by 3 member sensor in the hopper from the following machine (press, mashpump,..) Stainless-steel construction on 4 wheels (2 tractable, 2 fixed roller) Dimensions: (lxwxh) 3100x675x2200mm weight: 230kg Fold-away sorting table integrated Central wastewaterdrain on the bottom (ø75mm)

Condition: new, 🔹 Quick Description of the 7 Elevators for Sale • Manufacturer: ThyssenKrupp (TK Elevator) • Models: Evolution Blue (L1–L2) and BO61 (L3–L7) • Quantity: 7 passenger elevators L1 – Evolution Blue • 1600 kg, 2.5 m/s, 28 stops, 104 m travel Blsdpew R H Saefx Acyjp • Machine-room-less, high-capacity L2 – Evolution Blue • 1100 kg, 1.75 m/s, 6 stops, 17 m travel • Compact machine-room-less unit L3–L6 – BO61 (x4 units) • 900 kg each, 3 m/s, 26 stops, 104 m travel • Rope-driven with machine room • High-speed mid-capacity models L7 – BO61 • 900 kg, 3 m/s, 26 stops, 104 m travel • Same system as L3–L6, with slightly different car dimensions ⸻ ✅ In total: • 2 Evolution Blue elevators (1100–1600 kg) • 5 BO61 elevators (900 kg each) • All modern, rope-driven passenger lifts designed for mid/high-rise use.

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Engine: 11.1 kW 2760 rpm -Individual components: see photos Blodewbqawspfx Acyop -Dimensions: 1010/480/H1050 mm -Weight: 263 kg

Condition: new, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering function, axle load scales, total loading area length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each rated at 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear incline, laterally adjustable loading ramps, wooden floor 68 mm thick, storage box with lid for lashing chains or straps, contour marking as per regulation, rotating beacon, spring-loaded parking brake, including axle load indicators, vehicle fully hot-dip galvanized, surcharge for: hydraulic ramp displacement = price: €1,000. -- Subject to errors, mistakes and changes, sample images --, More data at: !, More details: ! Blodpjxt U Awjfx Acyep

Condition: used, WEBSTER & BENNETT EH 72” ELEVATING RAIL VERTICAL BORER MAKE WEBSTER & BENNETT MODEL EH 72” Bljdpfxjxt Hybj Acyjp TABLE DIA 1850 mm SWING 2150 mm HEIGHT UNDER RAIL 1200 mm SPEED UP TO 83 rpm FEED RATE 0.004-0.875 inch/min PLUS UPGRADED WITH BALL SCREWS 2 AXIS DIGITAL READ OUT MIMIK COPYING ATTACHMENT ELEVATING RAIL SET OF JAWS SET OF TOOL HOLDERS COLUMN MOUNTED MOTOR

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About us Since 2014, as a machinery manufacturer, we have been developing and producing our equipment in Austria. In addition to our individually customizable standard machines, we are also capable of providing bespoke solutions. We are happy to send you our product catalog—simply get in touch with us. --- Machining Center HSC 544HP 3rd Generation Key Data - Travel: 500 x 400 x 330 mm - BT30 spindle with 30,000 rpm and 6 Nm - 18-position tool magazine - Feed rate up to 27 m/min - incl. portal elevation and rotary-swivel table with 160 mm table diameter - Compact dimensions: W 1,460 x D 1,470 x H 2,110 mm, weight approx. 2,200 kg The machines are configured and assembled according to customer specifications. Depending on your requirements, numerous options are available, such as various spindle types up to 60,000 rpm, different cooling systems, direct path measuring system, integrated automation, etc. Control System - CS-Lab / AMT | Beckhoff optional - Intuitive and customizable user interface and easy operation via touchscreen - S-curve acceleration for dynamic axis movement with high precision - Integration of robots, pallet changers, workpiece changers, etc., possible Machine Frame - Solid mineral cast frame optimized by FEM simulations - Very high vibration damping, rigidity, and optimal thermal behavior - Use of roller guides instead of conventional ball guides for maximum stiffness - High-speed ball screws with reduced heat generation Drive Train Blodpfx Asxtvhuecysp - Precisely matched AC servo drives for high contour accuracy - Direct-drive, backlash-free ball screws Overview of Spindle Types 60,000 rpm | 0.3 Nm 40,000 rpm | 0.9 Nm 36,000 rpm | 2.4 Nm 30,000 rpm | 3.5 Nm 30,000 rpm | 6.0 Nm 20,000 rpm | 10.5 Nm We will be happy to provide you with competent and comprehensive advice in order to offer exactly the right solution for your machining task.

Condition: used, Year of construction: 2000, functionality: fully functional, The used BIGLIA B 501 YS CNC lathe with live tooling and sub-spindle is a fast, compact-medium size inclined bed CNC lathe, featuring an ASA 6" main spindle with "C" axis, FANUC 18i-T CNC controller with color LCD, year of manufacture 2000, compliant with CE standards. It is equipped with a sub-spindle (also with "C" axis), 12-station electrically driven turret with Y axis, dual chuck, tool presetting, and bar feeder interface. ASA 6" spindle size Main spindle chuck diameter: 210mm Bodpfjxf I I Rsx Acyjlp Main spindle bar capacity: 52mm Sub-spindle bar capacity (ASA 5"): 52mm Sub-spindle chuck diameter: 160mm Main spindle max. power: 26 kW Spindle speed: 4,000 rpm (both spindles) Maximum distance between spindles: approx. 50,000mm Y-axis travel: 120mm (+/-60mm) Live tooling power: 3.7 kW Machine weight: 5,300 kg The scope of supply is completed by a set of fixed tool holders, a set of live tool holders (as shown in photos), and a belt-type chip conveyor.

Year of construction: 2025, condition: new, neu 2025 030161 Bjdjxcg Ecspfx Acyelp November 2025, Zwischenve Deutschland 7170.9 € 138.4 € 23 mm MK 2 260 mm 20 - 2000 U/min 1,5 kW M16x1 430 mm 715 mm 1800 mm 290 kg manuell mm/U 110 mm 230 - 850 mm 420 x 340 mm 100 mm Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Manual feed Main switch Gewindeschneideinrichtung Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: good (used), Code: 0413 Brand: STEMAS - ITALY Model: PAF - CE Standard Automatic electronic 6-group sanding machine for edges, for panels, on flat and shaped edges, solid, veneered, unfinished, painted, profiles, funeral caskets, frames and various - CE Standard Technical data: Working height min/max mm 15/100 Working length min mm 200 Feed on track Electronically controlled infeed guide Carpet with speed variator 6/30 mt/min Electronic pressure group lifting Panel support with electronic positioning Feed on track with rubber pads and adjustable rubber pressure wheels 1° Group swivelling oscillating sander - Pneumatic pad - Motor Hp 4 (Kw 3) electronic speed - Inverter electronic lift - Automatic group entry - Electronic group inclination - Belt cleaning blower - Suction mouth diameter mm 150 Bljdpfxextnc Do Acysp 2° Group swivelling oscillating sander - Pneumatic pad - Motor Hp 3 (Kw 2,2) electronic speed - Inverter electronic lift - Automatic group entry - Electronic group inclination - Mechanical indicators SIKO - Belt cleaning blower - Suction mouth diameter mm 120 3° Group swivelling oscillating sander - Pneumatic pad - Motor Hp 3 (Kw 2,2) electronic speed - Inverter electronic lift - Automatic group entry - Electronic group inclination - Mechanical indicators SIKO - Belt cleaning blower - Suction mouth diameter mm 120 4° Group oscillating sander - Pneumatic pad - Motor Hp 2 (Kw 1,5) electronic speed - Inverter electronic lift - Automatic group entry - Electronic group inclination - Mechanical indicators SIKO - Belt cleaning blower - Suction mouth diameter mm 120 5° Group swivelling brush - Brush diameter mm 180 - Motor Hp 2 - Mechanical adjustment by handwheel - Electronic speed - Reverse rotation - Suction mouth diameter mm 100 6° Group swivelling brush - Brush diameter mm 180 - Motor Hp 2 - Mechanical adjustment by handwheel - Electronic speed - Reverse rotation - Suction mouth diameter mm 100 Max pressure 10 atm Additional rollers Set of belts Overall dimensions: Machine mm 7400 x 2200 x 1700 h Electrical cabinet mm 1200 x 600 x 2200 h

Condition: new, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering function, axle load scales, total loading area length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each rated for 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear incline, side-adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, contour marking according to regulation, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, surcharge for: hydraulic ramp adjustment = price: 1,000 €, -- Subject to misprints, errors and changes, sample pictures --, More data at: !, More details: ! Bledpjxghu Tsfx Acyjp

Condition: used, mileage: 105,741 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 12/2016, loading space length: 2,700 mm, loading space width: 2,070 mm, loading space height: 16,454 mm, loading space volume: 10 m³, emission class: euro6, color: blue, number of seats: 6, Equipment: ABS, air conditioning, electronic stability program (ESP), Flatbed tarpaulin bow construction, double cabin with 4 doors, aluminum side walls 400 mm, screen-printed floor, 4 lashing eyes on each side, all-wheel drive, electronic stability program, differential longitudinal lock, ABS, ASR, automatic climate control, warm/cool air duct to the passenger compartment, driver and passenger airbag, heated and electrically adjustable exterior mirrors, electric window lifter on driver and passenger door, static driver's seat, height and inclination adjustable, automatic daytime running lights, fog lights, rear leaf spring suspension, vehicle can be covered with advertising and/or labeled Bodpfevnngiex Acyolp Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About us Since 2014, we have been developing and manufacturing our systems in Austria as a machine builder. In addition to our customizable standard machines, we are also capable of providing special solutions upon request. We would be happy to send you our product catalog—just contact us. Machining Center HSC 544HP 3rd Generation Key Specifications - Travel range: 500 x 400 x 330 mm - BT30 spindle with 20,000 rpm and 10.5 Nm - 18-position tool magazine - Feed rate up to 27 m/min - Includes portal elevation and rotary-swivel table, table diameter 160 mm - Compact dimensions: W 1,460 x D 1,470 x H 2,230 mm, weight approx. 2,200 kg The machines are configured and built according to customer specifications. Depending on requirements, numerous options are available, such as various spindle types up to 60,000 rpm, different cooling systems, direct path measuring systems, integrated automation, and more... Blsdpfxjxtvfys Acysp Controller - CS-Lab / AMT | Beckhoff optional - User-friendly and customizable interface, easy operation via touchscreen - S-curve acceleration for dynamic axis movement with high precision - Integration of robots, pallet changers, workpiece changers, etc., possible Machine Frame - Solid mineral cast machine frame optimized via FEM simulations - Excellent vibration damping, rigidity, and optimal thermal characteristics - Use of roller guides instead of standard ball guides for maximum stiffness - High-speed ball screws with minimal heat generation Drive Train - Precisely matched AC servo drives for high contour accuracy - Direct-drive, backlash-free ball screws Spindle Types Overview 60,000 rpm | 0.3 Nm 40,000 rpm | 0.9 Nm 36,000 rpm | 2.4 Nm 30,000 rpm | 3.5 Nm 30,000 rpm | 6.0 Nm 20,000 rpm | 10.5 Nm We are happy to provide you with competent and comprehensive advice to deliver the ideal solution for your machining application.

Condition: new, The KNUTH R 60 V is a powerful and versatile radial drilling machine designed for exceptional drilling, reaming, and countersinking in steel or cast iron, making it a preferred choice among professionals in production and construction companies. This robust machine features a premium construction with a large column and a highly torsion-resistant boom, ensuring maximum rigidity and minimal clamping offset. With its motorized boom height adjustment and oil-bath lifting gears, operators experience smooth handling, even with large and heavy workpieces. Additional highlights include infinitely variable spindle speeds with a digital display and an integrated coolant system, ensuring reliability and cost-effectiveness. The R 60 V, part of the renowned Radial Drilling Machines group, stands out for its modern design and user-friendly operation. Contact us to request a quote and elevate your drilling capabilities with KNUTH’s exceptional machinery. Bjdpfx Acsuyic Hjyelp

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3360.75 € 1 13 mm MK 2 220 mm 40 - 4000 U/min 0,54 (230 V, frequenzgere kW M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg Bsdpsxcbhrsfx Acyolp 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Equipment and technical data: Motor power: 3 kW / 4 HP Spindle speed: 5,000 rpm Spindle diameter: 120 mm Number of knives: 4 Feed speed: 8 + 14 m/min Bledoxr R T Aspfx Acyep Maximum planing height: 230 mm Extraction port: Ø 150 mm Surface table: two-piece, foldable, synchronized on both sides Table height adjustment: via double universal joint shafts, handwheel with scale indicator Thickness planer: with outfeed roller, spring-mounted, feed rollers driven synchronously Fence: tiltable, inclination with magnifying scale display Standard features: TERSA cutter block or alternative knife block, brake, undervoltage release Dimensions: 2,040 × 410 mm (surface tables) Weight: 560 kg Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale weight: 700 kg, overall weight: 33,000 kg, oil tank capacity: 2,000 l, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 FU Year of construction 2010 Operating hours approx. 40.000 hours, as of July 2025 Main press force 880 kN Specific pressing force 107 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 990 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 105 kW Total current consumption 200 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 500 up to 700 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 14,000 x 23,000 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2010 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 13,905 mm Length goose neck 3,732 mm Grade 30° Nominal width 1,800 mm Effecting width 1,641 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 12,200 x 3,000 x 1,500 (l x w x h) Scope of delivery: The conveyor belt (without steel podium and maintenance platform), baling press, bale chute and wire drawing stations are for sale, without wire. The plant will remain in operation until March 2026, when it will be replaced by a new press line. Bljdpfsxr N Tbjx Acysp Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, mileage: 26,469 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 11/1986, color: red, total length: 6,900 mm, total width: 2,500 mm, total height: 2,850 mm, Fire engine, pump FP 8/8, differential lock rear, static driver's seat, height and inclination adjustable, pop-up window, headlight range adjustment, halogen fog lights, 2 x rotating beacons, reversing lights, trailer hitch, leaf spring suspension, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Bljdjvnnvwspfx Acyop Please contact us!

Condition: used, WeightPack, Krones & Posimat 750ml Bottle Bleach Filling Line comprising: Bjdpfsxr A Hzox Acyolp Lanfranchi bolted stainless steel bottle silo Posimat Access Series N23 bottle unscrambler (2012) Krones Contiroll Labeller (2012) Krones Checkmat 731 inspection system (2012) WeightPack WFT 36/8-141 AC, 36 head rotary bleach filler with cap applicator, hopper & elevator

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 750 mm center height: 180 mm / (250 mm = option) Workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder correction quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 12,5 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: net 3500 Kg Infeed drive by DC motor Air cushion supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Bjdpfxjiv Auds Acyslp Feed control digital with Siemens panel and Siemens SPS for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel scale in X and Z axis make HEIDENHAIN. similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: new, Year of construction: 2024, SCHORR track dumper with box, tipping hydraulics and ride-on platform 500 kg load capacity 9.2 hp engine -- Self-propelled & powerful caterpillar drive -- Large & high-quality tipper body -- Folding ride-on platform fitted as standard -- Width of only 680mm -- Top price-performance ratio -- NEW & IMMEDIATELY AVAILABLE! The SCHORR track dumper RR500DHKB has a hydraulic tilt drive and a payload of 500 kg as well as a powerful 9.2 hp single-cylinder 4-stroke gasoline engine. Thanks to its slim design (680 mm), the minidumper can also drive through narrow paths and doors, making it an extremely flexible means of transportation. Thanks to the minidumper's powerful track drive, you can also overcome rough terrain, inclines and kerbs with ease. The rubber tracks provide a secure footing in any working area. Lifting and lowering the tipper body is effortless and requires little effort, even when fully loaded. With a robust trough made of thick sheet metal and removable side walls, the loading area can be enlarged if required, allowing Euro pallets or firewood to be transported, for example. SCHORR RR500DHKB minidumper - The advantages at a glance: -- Self-propelled & powerful caterpillar drive -- Large and high-quality tipper body -- Folding ride-on platform fitted as standard -- Removable side walls allow the loading area to be enlarged Technical data: Load capacity: 500kg Weight: 284kg Tilt drive: Hydraulic Engine: 9.2 HP (Loncin, 270cc) Starter: Cable starter Length: 950mm Width: 680mm Height: 465mm Track width: 180mm Pump flow rate: 9 L/min. 3 forward gears 1 reverse gear Removable trough Type of packaging: Plywood box Packaging size: 167x77x113cm Our minidumper is extremely maneuverable and is often used on construction sites, in agriculture and forestry or in gardening and landscaping as well as for conversion work. Especially in combination with one of our mini excavators, the track dumper is a worthwhile investment. The excavated material can be easily transported into a container or similar with the mini dumper. Of course, we always have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Whether you want to have the minidumper delivered or collect it from our premises in 48465 Schüttorf, we have the right solution for everything. Please feel free to contact us. In order to make pick-ups and viewings as convenient as possible for you, we would like to point out that they are only possible by telephone appointment. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! Bljdpemv Eu Rofx Acyop We at SCHORR will be happy to answer any questions you may have about our minidumpers. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: used, Serta Blow Moulding Line & CMI IC Filler Line 3x Beccaria TV 2500 granule mixer dryers, 2,500L capacity Maguire gravimetric blender 3x Serta ESH10 3 head extrusion blow moulding machines with Moretto hopper loaders Tria BM90-42 granulator with acoustic enclosure (2014) CMI IC 18/5 14PP DOS 6000, 18 head rotary filler (2005) with cap applicator, hopper elevator Blsdpfx Aexr Ar Docysp ProSystem NV003 case packer ProSystem Rotafilm AV1 pallet wrapper

Condition: new, Year of construction: 2024, SCHORR track dumper with tipping hydraulics and ride-on platform 500 kg load capacity 9.2 hp engine -- Self-propelled & powerful caterpillar drive -- Large & high-quality tipper body -- Folding ride-on platform fitted as standard -- Width of only 680mm -- Top price-performance ratio -- NEW & IMMEDIATELY AVAILABLE! The SCHORR track dumper RR500DHKA has a hydraulic tilt drive and a payload of 500 kg as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. Thanks to its slim design (680 mm), the minidumper can also drive through narrow paths and doors, making it an extremely flexible means of transportation. Thanks to the minidumper's powerful track drive, you can also overcome rough terrain, inclines and kerbs with ease. The rubber tracks provide a secure footing in any working area. Lifting and lowering the tipper body is effortless and requires little effort thanks to the hydraulic tipper drive, even when fully loaded. Another advantage of the minidumper is its extra-large hydraulic oil tank with oil filter. This ensures a long service life for the machine and minimizes maintenance requirements. With a robust body made of thick sheet metal and a straight outlet that ensures quick and easy draining, this dumper is a must for anyone who needs to transport heavy loads. Even tipping on slight inclines is no problem. The large tipping angle ensures that even fully loaded skips are emptied completely without you having to help manually. This saves time and effort and makes the minidumper an indispensable tool for anyone who values efficiency and performance. SCHORR minidumper - The advantages at a glance: -- Self-propelled & powerful caterpillar drive -- Large and high-quality tipper body -- Folding ride-on platform fitted as standard Technical data: Load capacity: 500kg Bodpfx Aemv Evrecyslp Weight: 280kg Tilt drive: Hydraulic Engine: 9.2 HP (Loncin, 270cc) Starter: Cable starter Length: 950mm Width: 680mm Height: 465mm Tire size: 180mm Pump flow rate: 9 L/min. 3 forward gears 1 reverse gear Removable trough Type of packaging: Plywood box Packaging size: 167x77x113cm Our minidumper is extremely maneuverable and is often used on construction sites, in agriculture and forestry or in gardening and landscaping as well as for conversion work. Of course, we always have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. In order to make collections and inspections as convenient as possible for you, we would like to point out that these are only possible by telephone appointment. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our minidumpers. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 22 h, Powerful mini dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 22 hours Bodpfx Acswh Nk Ieyjlp Year of manufacture: 2025 SCHORR tracked dumper RR500DHKA2 PRO: - 9.2 HP four-stroke engine - Self-propelled and powerful chain drive - 500 kg payload - Large and high-quality tipping trough with a large tipping angle - Foldable rider platform as standard - 6+2 gears - Robust and scratch-resistant - Top value for money SCHORR tracked dumper RR500DHKA2 PRO with hydraulic tipping system and rider platform The SCHORR tracked dumper RR500DHKA2 features a hydraulic tipping drive and a payload of 500 kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. The robust transmission has 6 forward gears and 2 reverse gears. Thanks to its slim design (710 mm), the mini dumper can also navigate narrow paths and doorways, making it an extremely flexible means of transport. The mini dumper's powerful track drive allows you to easily negotiate rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. With a robust dumper made of heavy-duty sheet metal and a straight discharge that ensures quick and easy discharge, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on gentle inclines is also no problem. The large tipping angle ensures that even fully loaded dumpers are completely emptied without the need for manual assistance. This saves time and effort and makes the motorized wheelbarrow an indispensable tool for anyone who values efficiency and performance. The smooth-running track brakes ensure the dumper's excellent maneuverability. TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR500 Model: DHKA2 Load capacity: 500 kg Tilt drive: Hydraulic (stepless) Traction drive: Chain Weight without/with packaging: 288 / 328 kg Drive Engine: Air-cooled single-cylinder four-stroke engine (OHV) Starter: Recoil starter Power: 9.2 hp Transmission: 6 forward gears / 2 reverse gears Speed Forward gear: max. 8 km/h Reverse gear: max. 5 Fluids Fuel tank capacity: 6 L (unleaded gasoline) Hydraulic oil tank capacity: 3 L (ISO VG 32) Transmission oil tank capacity: 1.5 L (SAE 80W-90) Engine oil tank capacity: 0.9 L (15W-40) Max. hydraulic oil flow rate: 9L/min Basic dimensions Total length of platform folded: 1800mm Total length of platform unfolded: 2000mm Total width (including chain): 710mm Total height: 1050mm Tank dimensions (internal dimensions): 740 x 665 x 435mm Tank dimensions (external dimensions): 1060 x 710 x 520mm Track width: 710mm Loading volume (liquid): ~ 200L Loading volume (heaped): up to 370L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Ground clearance: 120mm Packaging dimensions: 1890 x 740 x 1220mm Filling height Side: 810mm Front: 580mm A TRUE ALL-ROUNDER The RR500DHKA2 mini dumper offers a flexible and mobile solution for transporting materials (e.g., bulk materials) in construction projects, especially on uneven terrain. Thanks to its compact design and track drive, the dumper is highly maneuverable, making it particularly suitable for construction and gardening work.

Condition: new, power: 6.77 kW (9.20 HP), Year of construction: 2024, SCHORR track dumper RR500DHKAH PRO - Discover the advantages: - 9.2 hp four-stroke engine - Self-propelled & powerful track drive - Hydraulic scissor lift (discharge height 1.44m) - 500kg payload - Large & high-quality tipper body with large tipping angle - Folding passenger platform as standard - 6+2 gears SCHORR TRACK DUMPER DHKAH PRO WITH TIPPING HYDRAULICS, RIDER PLATFORM AND SCISSOR LIFT The SCHORR RR500DHKAH track dumper has a hydraulic tipping drive and a payload of 500 kg as well as a powerful 9.2 hp single-cylinder 4-stroke petrol engine. The special feature of the RR500DHKAH is the hydraulically controllable scissor lift function. This allows you to eject the transported material up to a height of 1.44 m - ideal for trailers, containers or other higher areas. Thanks to its slim design (700 mm), the minidumper can also drive through narrow paths and doors, making it an extremely flexible means of transportation. Thanks to the minidumper's powerful track drive, you can also overcome rough terrain, inclines and kerbs with ease. The rubber tracks provide a secure footing in any working area. Lifting and lowering the tipper body / box is effortless and effortless thanks to the hydraulic tipper drive, even when fully loaded. With a robust body made of thick sheet metal and a straight outlet that ensures quick and easy discharge, this dumper is a must for anyone who needs to transport heavy loads. Even tipping on slight inclines is no problem. The large tipping angle ensures that even fully loaded skips are emptied completely without you having to help manually. This saves time and effort and makes the motorized wheelbarrow an indispensable tool for anyone who values efficiency and performance. Bodpfxettg Ups Acyelp TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR500 Model: DHKAH Load capacity: 500kg Tilt drive: Hydraulic (stepless) Travel drive: Chain Weight without/with packaging: 363 / 388kg Drive Engine: Air-cooled 1 cylinder four-stroke engine (OHV) Starter: Reversing starter Power: 9,2PS Gearbox: 6 forward gears / 2 reverse gears Speed: forward gear Forward gear: max. 8km/h Reverse gear: max. 5km/h Liquids Fuel tank capacity: 6L (unleaded gasoline) Hydraulic oil tank capacity: 3L (ISO VG 32) Transmission oil tank capacity: 1.5L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Max. Hydraulic oil flow rate: 9L/min Basic dimensions Total length platform folded: 1900mm Total length platform unfolded: 2100mm Total width (incl. chain): 710mm Overall height: 1050mm Container dimensions (inside): 740 x 665 x 435mm Container dimensions (outer dimensions): 1060 x 710 x 520mm Track width: 710mm Load volume (liquid): ~ 200L Load volume (heaped): up to 370L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Ground clearance: 120mm Packaging size: 1890 x 740 x 1220mm Filling height Side: 1030mm Front: 810mm Discharge height min./max.: 810 / 1440mm We at SCHORR are happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or e-mail. We look forward to hearing from you and being able to help you with advice.