Used Inclined Elevator for sale (2,063)

Condition: used, Year of construction: 1986, RUTHMANN work platform, type: MTS 260, built in 1984, 4-way hydraulically extendable and supportable support, 3 levels hydraulically extendable, lifting height approx. 26.00 m, working height approx. 27.50 - 28.00 m, retracted height approx. 3.60 m, lateral reach approx. 24.00 m, swivel range 360 degrees, platform load capacity 250 kg, emergency lowering, double insulation against max. 1000 volts, auxiliary drive, differential lock, heated exterior mirrors, pop-up window, roof hatch, static driver's seat, height and inclination adjustable, middle seat, rotating beacon, battery isolator, leaf spring suspension, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this object. Please contact us! Lsdevnpmdopfx Affeak

Condition: used, Swing loader, rotating and tipping frame, lifting tipper, forklift tipping container, tipping container, tipping skip, tipping device for loading trolleys, loading trolleys -Handover: in its current condition as inspected -Status: cannot be tested because no software has been programmed. -Tipping device: made of stainless steel -Ejection height: approx. 1600 mm -Use: for bakery products or the food industry Laedpfx Afeupbdyjfok -Individual components/dimensions: see photos, roller spacing 1640 mm -Dimensions: 2500/2000/H1720 mm -Weight: 1740 kg

Condition: good (used), Code: 0278 Brand: TECNOMAX SCM Model: ST 4 ELITE - CE Standard Laedpfxsx Ivuao Affok Saw spindle moulder with tilting blade and scoring unit for carpentry, furniture, wooden window frames, doors, panels and various - CE Standard Technical data: Squaring carriage length 3200 mm Blade inclination 90-45 degrees Max saw blade diameter with scoring unit mounted 315 mm Max saw blade projection from the table at 90°/45° mm 100/70 Cutting width at parallel guide 1000 mm Scoring unit blade diameter 100 mm Spindle moulder Useful spindle length 125 mm Spindle rotation speed rpm 3500/6000/8000/10000 Max tool diameter 210 mm Three-phase motors 5,5 Hp Suction inlet diameter mm 120 Overall dimensions of assembled machine mm 3600 x 3000 x 1100 h Overall dimensions for transport mm 3600 X 1600 X 1100 h Weight kg 645

Condition: new, Sturdy cast steel construction High-precision sizing slide made of anodized aluminium with a travel of 2250 mm Maximum saw blade diameter of 315 mm possible, saw blade can be tilted 45 Large trimming frame (960 x 600 mm) with telescopic aluminum fence that can be extended up to 2660 mm Heavily ribbed dressing work tables made of gray cast iron, re-annealed and stress-free for decades of stability and flatness Helical toothed steel feed roller for even material feed Three milling speeds, manually adjustable Milling spindle with right/left rotation Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Dressing table width 410 mm Dressing table length 1810 mm Chip removal max. 4 mm Thicknessing table length 605 mm Thicknessing table width 410 mm Working height min. 3 mm Working height max. 230 mm Feed speed 7 m/min Chip removal max. 4 mm Suction nozzle diameter 4 x 120 mm Planer cutterblock type TERSA (3 pcs.) Planer shaft diameter 72 mm Speed 5200 min-¹ Circular saw Edging length 2250 mm Cutting width with rip fence 900 mm Max. Cutting width to the left of the saw blade 2310 mm Saw blade inclination 90 - 45 ° Max. Cutting height at 90° 90 mm Max. Cutting height at 45° 63 mm Saw blade diameter 315 mm Saw blade speed 4000 min-¹ Sliding carriage and table Length of sliding table 2600 mm Spindle diameter 30 mm Speeds 3500/7000/ 10000 min-¹ Milling tool diameter max. lowerable/ not lowerable 180/ 210 mm Power drive motor 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx. 560 kg INCLUDING OPTIONS - Handwheel with gravitational-numerical display for thicknessing table positioning - Sliding carriage length 2600 mm - Professional stops - "TERSA" planer cutterhead - Right-left rotation of the cutter Laedpfsiiynnox Affek

Condition: used, Year of construction: 2005, functionality: fully functional, 1. Manufacturer • Manufacturer: Karl Eugen Fischer GmbH 2. Machine Identification • Machine type: Adhesive Strip Applicator with Layer Gauge • Model: HTBC • Year of manufacture: 2005–2015 (serial production range) 3. Intended Use • Cutting and application of rubber strips and/or ply materials • Designed for use in tire manufacturing and rubber processing 4. Mechanical Construction • Heavy-duty steel frame construction • Industrial green paint finish • Elevated operator platform with integrated access stairs 5. Conveyor and Material Handling • Wide flat-belt conveyor system for continuous transport of rubber sheets • Conveyor system integrated into the cutting and application process 6. Unwinding and Rewinding System • Overhead and lower roller stations • Designed for handling liner and ply materials • Configured for controlled unwinding and rewinding operations 7. Electrical Equipment • Power supply: 400 V / 50 Hz • Control cabinets: – Large, free-standing grey control cabinet bank – Integrated climate control system 8. Safety Equipment Laodpfox Iuf Rjx Affok • Yellow safety fencing • Mechanical safeguarding of hazardous areas

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability Lodpfx Afsv Nhg Sefoak and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: used, mileage: 70,800 km, power: 324 kW (440.52 HP), first registration: 11/1982, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: green, gearing type: mechanical, total width: 2,500 mm, total height: 3,600 mm, Equipment: all wheel drive, crane, Heavy-duty all-wheel drive 8x8 tractor unit for heavy trailer loads, recovery operations, etc. Equipped with WSK torque converter transmission, rear trailer load capacity of 100,000 kg, front coupling for shunting, 2 x Rotzler recovery winches each with 200 kN (40,000 kg) pulling force and approx. 50 m cable length, 1 x Rotzler self-recovery winch with 80 kN (8,000 kg) and approx. 55 m cable length, 1 x Rotzler auxiliary winch for reeling out the two recovery winch cables with 6 kN (600 kg) and approx. 100 m cable length. Fitted with 1 x Palfinger loader crane PK 8200A, lifting 3,150 kg at 2.5 m and 970 kg at 7.7 m. Platform length approx. 3,650 mm, side wall height approx. 680 mm, cargo area for ballast and recovery equipment, approx. 13,000 kg steel and ballast weight, climbing ability at 20% incline: approx. 110,000 kg. Fuel tanks: approx. 400 + 210 liters, 10-cylinder turbo water-cooled engine, fording depth: 800 mm. Top condition. Vehicle may have advertising stickers and/or lettering. Ljdpfxox Ayxve Affsak

Condition: good (used), hydraulic unit -The hydraulic unit comes from a hydraulic elevator -Design: IM 1209 Ljdpeb A Iw Ssfx Affoak

Condition: new, The SBS 235, a versatile Horizontal Mitre Cutting Bandsaw from KNUTH, is designed for semi-automatic operations in industrial settings. This compact machine features a rigid vise with a lateral slide and a cast-iron saw frame that swivels up to 60° right and 45° left, enabling efficient cutting of various workpiece dimensions. The powerful motor ensures continuous operation, while the bi-metallic saw blade provides stability for heavy machining tasks. Equipped with an advanced coolant system and mechanical quick-action clamping, the SBS 235 streamlines your workflow, reducing downtime and enhancing productivity. Users will appreciate the easy manual feed for precise handling and the quiet operation during use. With capabilities to cut round pieces up to 225 mm and flat pieces measuring 150x245 mm, this Horizontal Mitre Cutting Bandsaw is perfect for small batches. Request a quote today for the SBS 235 and elevate your cutting operations! Laedjuxdfyjpfx Affsk

Year of construction: 2014, condition: used, inclination 0,5 - 6,3 ° speed 700 m/min stroke 100 mm Lodpsxukrwefx Affjak max. diameter 270 mm pitch angle +/- 45 ° Cutter Spindle Diameter 68,23 mm table height over floor 930 mm weight of the machine ca. 3 t dimensions of the machine ca. 1,35 x 1,75 x 2,2 m

Condition: ready for operation (used), The positioner SILVESTRINI Mod. SA 1 ORBIT EL T5 are composed by: HEADSTOCK Section The structure in rugged electro-welded steelwork, supporting a motorized (horizontal axis) rotation system. The rotation is given by a gear motor that, by means of a pinion, meshes with a large slewing bearing, to which is fixed the ORBIT Structure. This section is equipped with lateral precision guides to permit the ORBIT vertical lifting movement. The elevation is hydraulic, by means of hydraulic piston on which are inserted special clamping safety valves, that prevent the fall of the table, in case of accidental breakage of tubes. Laedpfx Afox Imnqjfsk On the horizontal axis is installed an electric rotating joint for the connexions with the Orbit table (vertical axis). This permits the total axes free rotation. MECHANICAL STRUCTURE ( ORBIT) It Is constructed in rugged electro-welded steelwork and holds a rotating table (motorized like the over mentioned headstock) that will support thу working pieces in high accuracy. A special bronze rotary earth connection (Silvestrini patent) transmits welding current. Technical specifications related to the workpieces: Cap: 5 ton Table dia: 1000 mm Max rotation speed of the table: 1 rpm Lifting stroke: 1000 mm Lifting speed: 700 mm

Condition: new, GRAULE ZS 85 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 85 N cross-cut and mitre saw - inclinable - Material feed shoulder made of laminated wood - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 85 N to ZS 170 Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Lodpfx Afeu R Sycsfoak - new exhibition machine -

Condition: used, mileage: 468,120 km, power: 324 kW (440.52 HP), first registration: 01/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2026, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, navigation system, parking heater, HydroDrive, PTO (power take-off), ABS, ASR (traction control), differential locks, engine brake, hill start assist, air conditioning, auxiliary heater, navigation system, heated and electrically adjustable exterior mirrors, electric windows for driver and passenger doors, roof hatch, multifunction steering wheel, driver’s comfort suspension seat, 1x sleeping berth, fog lights, automatic daytime running lights, 2x rotating beacons, hydraulic connection for trailer (dual circuit), elevated exhaust system, air suspension with raise/lower function on rear axle. Vehicle may be covered with advertising decals and/or lettering. Our offer does not generally include new technical inspection (TÜV). If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops! The vehicle may be covered with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. We will be happy to provide you with a financing or leasing offer for this item. Lajdpfx Ajxv N A Roffok Please feel free to contact us!

Condition: good (used), Code: 0465 Brand: IDM - SCM GROUP Model: IDIMATIC 49-20 Automatic edge bander for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various Technical data: Min/max gluing height mm 10/50 Min/max edge thickness mm 0,4/20 Min panel width mm 60 Min panel length mm 140 Adjustable feed speed m/min 12/18 Electric press lift Telescopic support for large panels Soundproof cabin Lodpfx Afevhc E Hsfsak Composition: Anti-adhesion unit: spreads anti-adhesive liquid on the upper and lower surfaces of the panel Gluing unit with pre-melting unit Pressure rollers End trimmer unit for front and rear vertical cutting of excess edging - N° 2 motors 0,5 Kw at 12000 rpm - Tool diameter mm 110 Top/bottom trimmer unit with superimposed motors for trimming the upper and lower sides of the excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Top/bottom trimmer and beveller unit for final upper and lower trimming of excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Manual turret device - automatic positioning of the tool post and front copiers according to the different edge band thickness Routing unit makes through holes and non-through holes in the edged side and on the upper and lower parts of the panel and is time controlled Cleaning unit for brushing and polishing of the edge bands applied - N° 2 motors 0,18 Kw at 1400 rpm which can be inclined vertically between 0° and 30° Compressed air 7-8 bar Overall dimensions mm 5600 x 1000 x 1500 h Weight kg 2500

Condition: used, mileage: 36,000 km, power: 375 kW (509.86 HP), first registration: 06/2023, fuel type: diesel, empty load weight: 16,000 kg, maximum load weight: 17,000 kg, overall weight: 33,000 kg, axle configuration: 6x6, wheelbase: 4,200 mm, brakes: engine braking, color: brown, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, crane, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: in transit, StreamSpace, Mercedes PowerShift 3, large cab, 1x comfort seat, 1x bunk, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, electric roof, auxiliary heater, air horn, ABS (anti-lock braking system), traction control system (ASR), constant throttle, PTO, differential lock, fog lights, high beams, work lights, storage box, leaf/air suspension, crane behind cab, emergency stop, grab control, foldable, elevated seat, 2-point hydraulic support, 2x hydraulic extensions, green environmental badge. Wheelbase: 4200 mm Body: ARCHIVE IMAGE! Tractor unit with crane Palfinger Epsilon S260Z96 with crane cab 9t front axle, rear axle planetary gear 300, 13.4t Electronic braking system with ABS and ASR, ABS can be deactivated, drum brakes front and rear, stabilizer front axle and 1st rear axle, reinforced stabilizer 2nd rear axle, condensate monitoring for compressed air system, electronic parking brake, smoker package, seat belt monitor, lower comfort bed, electric stationary air conditioning, residual heat utilization, additional hot water heater, additional thermal insulation, reverse warning system, PSM 2nd generation, StreamSpace, rain sensor, light sensor, electric lifting roof, MirrorCam, comfort central locking, off-road driving mode, Mercedes PowerShift 3, PowerShift Advanced, Multimedia Cockpit, Remote Online, Remote Connect, pre-installation for toll recording, navigation system, transmission oil cooler, LED daytime running lights, reinforced engine mounts, refrigerator, high performance engine brake, skid plate under bumper, climate package, PTO MB 123-10c MPA N-/M-speed. Load diagram: 4m-5300kg, 5m-4230kg, 6m-3520kg, 7m-3000kg, 8m-2610kg, 9m-2300kg! Grab available at extra cost! Ljdpfx Afexuhb Nofsak Matching Doll timber trailer available for €36,900 net extra, see -9277-! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted!

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: Lajdpfox Ifgrex Affok - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: new, Technical data: Working width mm 1.350 Min./max. working height mm 4 - 170 grinding belt width/ length mm 1.370/ 2620 Ledjhtuvrjpfx Affoak Main motor power kW 15,0 with inverter Feed speed variable m/min 3,5 - 18 Working aggregates: 1st unit: "RA" inclined ribbed steel contact roller diameter 160 mm 2nd aggregate: Combi: rubber coated grinding roller diameter 160 mm, 45 Sh Elastic electronic link sanding shoe "MESAR" with 24 segments Version C: - Elastic electronic sanding shoe "MESAR" complete with: - Pneumatic cylinder (On/Off) for the automatic on/off of the sanding roller sanding shoe unit - Activation of the sectors by the electronic control which synchronizes their insertion with the feed speed and controls the number of sectors according to the workpiece geometry. and allows the selection of more or less sectors on the left and on the right side of the workpiece. Versions 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar in the infeed. Other equipment: Roller table in infeed and outfeed for long workpieces Perforated table and transport carpet Vacuum table with electric fan 4 kW (5,5 PS ) integrated in machine frame Oscillating blow-off device 2nd unit Touch screen 10,4" screen with 'eye S software integration ATTENTION: PICTURES are EXAMPLE PICTURES OF A SIMILAR SD70!

Condition: new, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Saw blade guide top, Saw blade guide at bottom, Quick clamping device via eccentric lever ----- Technical data ----- Rollers Ø: 430 mm, Ledpfx Afsu R S Akjfeak max. cutting height: 270 mm, max. cutting width with fence: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, Table size: 610 x 431 mm, Table inclination: -10 - +45 °, Motor 400 V: 1.5 kW, suction nozzle Ø: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm - new exhibition machine -

Condition: new, maximum load weight: 48,000 kg, overall weight: 58,000 kg, axle configuration: 3 axles, loading space length: 12,690 mm, loading space width: 2,540 mm, total width: 2,550 mm, total height: 3,000 mm, Equipment: ABS, Loading bed: 8,230 mm, bed loading height: approx. 960 mm, extendable to 3,000 mm, rear incline: 620 mm, gooseneck: 2,100 mm + incline 1,740 mm, storage box on gooseneck, steel drop sides 400 mm, 6 heavy-duty lashing rings per side, hydraulic ramp (split) (LxW) 3,200 x 750 mm, electric hydraulic pump, hydraulic quick-release coupling system, landing gears, 2 drop supports at rear, extendable warning signs, loading pressure gauge, ABS, EBS, "KOC" axle(s), 3rd axle: self-steering axle, drum brake system, air suspension with lift/lowering function, lift axle, LED lights, 2x storage boxes, vehicle may have advertising decals and/or lettering. Our offer generally does not include a new TÜV approval. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! Vehicle may have advertising decals and/or lettering. Our general delivery and payment conditions apply. We are happy to provide a financing or leasing offer for this unit. Please contact us! Laodpfxjw Dxpxe Affek

Condition: good (used), Code: 0806 Brand: HIRZT - ITALY Model: B 300 - CE Standard Automatic edge bander for pre-glued edges in strips or rolls: melamine, plastic laminates, veneer, etc . up to 3 mm thickness - CE Standard Ledpfxox Ihuls Affsak Composition: Motor V. 220 single-phase Pneumatic end cutting unit (shear) front and rear Blower with air filter - Power 440 W Trimming copying unit with adjustment from the outside - Motors 220 x 2 W - Trimmer speed rpm 10000 End cutting finishing unit with foot control N° 20 rollers inclined on the plane Feed motor 13 wheels V.200 single-phase - Speed 4,7 mt/min Max edge thickness mm 3 Panel thickness min/max 10/50 mm Min panel dimensions mm 70 x 140 Total absorption Kw 3,8 Digital thermometer 10-350 degrees Extensible front support Overall dimensions mm 1800 x 700 x 1300 h Weight kg 250

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V Lajdpfedibw Aox Affsk suction connection 120 mm

Condition: used, maximum load weight: 22,590 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 07/1989, DIEBOLT two-axle telescopic semi-trailer with timber loading crane mounted on the gooseneck, loading area extension up to approx. 15,540 mm, Loglift grapple, bolster support, 1 x hydraulic extensions, grapple control, elevated control seat, BPW axle(s), twin tires, drum brake system, leaf suspension, tow coupling. The vehicle may have advertising decals and/or lettering applied. Our offer generally does not include a new technical inspection (TÜV). If a new TÜV inspection is required, we will gladly provide a quote from our partner workshops! The vehicle may have advertising decals and/or lettering applied. Our general terms and conditions of delivery and payment apply. Lsdexfpb Eepfx Affjak We can provide you with a financing or leasing offer for this unit. Please contact us!

Condition: good (used), Code: 0186 Brand: BIESSE ARTECH Model: AKRON 420 - CE Standard Automatic edge bander for wood, Pvc, Abs, and melamine edges for carpentry, furniture, kitchens, custom-made furnishings, panels and various - CE Standard Technical data: Panel height 10-60 mm Ledpjw D E Diefx Affjak Min/max edge thickness 0,4-6 mm Minimum panel length 140 mm Minimum panel width 50 mm Track feed speed 12 mt/min Protective cabin Composition: Gluing unit: Glue tank capacity 2 kg - Shear for 3 mm roll edges End tcutting unit: n° 2 independent high-frequency motors 0,5 Kw - Inclination from 0 to 15° Tilting fine finishing unit: 2 independent high-frequency motors 0,65 Kw , tiltable from 0 to 25° Brush unit: Brush diameter mm 150 - Motors Kw 0,37 each Suction port diameter mm 150 Compressed air 7 bar Overall dimensions mm 3200 x 1000 x 1500 h Weight kg 900

Condition: used, mileage: 10,481 km, power: 77 kW (104.69 HP), first registration: 10/1993, fuel type: gasoline, overall weight: 5,500 kg, next inspection (TÜV): 11/2025, color: red, gearing type: mechanical, number of seats: 6, total length: 6,030 mm, total width: 2,310 mm, total height: 2,550 mm, Equipment: ABS, Fire engine, GÖRLITZ body, type: TSF-W, double cabin with 3 doors, water tank: 500 liters, ABS, differential lock rear, heated windscreen, static driver's seat, height and inclination adjustable, pop-up window, headlight range adjustment, halogen fog lights in the front bumper, 2 x rotating beacon, Wandel & Goltermann WA-3 warning system, announcement loudspeaker, side reflectors, Rockinger tow bar, 7-pin trailer socket, leaf springs, tank approx. 70 liters, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Ledov Iidijpfx Affjak We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, mileage: 105,741 km, power: 120 kW (163.15 HP), first registration: 12/2016, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 6, loading space volume: 10 m³, loading space length: 2,700 mm, loading space width: 2,070 mm, loading space height: 16,454 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), Flatbed tarpaulin bow construction, double cabin with 4 doors, aluminum side walls 400 mm, screen-printed floor, 4 lashing eyes on each side, all-wheel drive, electronic stability program, differential longitudinal lock, ABS, ASR, automatic climate control, warm/cool air duct to the passenger compartment, driver and passenger airbag, heated and electrically adjustable exterior mirrors, electric window lifter on driver and passenger door, static driver's seat, height and inclination adjustable, automatic daytime running lights, fog lights, rear leaf spring suspension, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Lsdpfxevnngij Affjak We would be happy to make you a financing or leasing offer for this object. Please contact us!