Used Inclined Elevator for sale (2,058)

Condition: excellent (used), REF: MM6164 1 x Inclined conveyor with height adjustable feet, single-speed. Previously used as an outfeed conveyor for a VFFS bagging machine.  Kedpfxjw H I Agj Affefa Technical specification ⚙️ ✅ Belt diameter - 2950mm long x 250mm wide. ✅ Infeed height - 350mm.  ✅ Outfeed height - 850mm.  ✅ Overall dimensions - 2950mm long x 450mm wide x 850mm high. ✅ Electric supply - 240 V / 50 hz / 1 phase.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06007153/001, total height: 6,050 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 210 kg, construction height: 6,050 mm, input voltage: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial Number: 06007153/001 Kjdpfx Afsxq Tbtsfofa Year of manufacture: 2006 Total load capacity: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available upon request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (Height adjustable to available space) Power supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed; more or heavier trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Storage capacity with 36 trays: approx. 95 m², each tray approx. 2.64 m² - Electronic volume measuring system with 25 mm grid on the display - Access opening with sliding doors for protection of personnel and stored goods - C2000 Control System, with B/W OP2000 display - LED anti-glare lighting above access point - Toothed-belt drive for minimal noise - Toothed-belt drive for fastest order picking - Shelf spacing adjustable in 25 mm increments by configuring support profiles, ideal for high-density storage - Weight management system monitors the load per tray - Includes light pointer Price: On request only by e-mail Price: excluding VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from brands such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: like new (used), Item: D-7033-Elevator Elevator with plastic conveyor, Stainless Steel support structure, Dimension: Length: 2000 mm, Approach H.: 250 mm Kfjdpfxsitk D As Affja Discharge H.: 1050 mm, Width: 250 mm Flight H.: 30 mm Distance: 250 mm

Condition: excellent (used), For sale we offer a used ascending belt conveyor. Z-belt conveyors are used in all industries. technical data: Manufacturer: Vanderlande Total width 620mm, belt width 500mm, Length of the upper part 500 mm, length of the rising part 3950 mm, length of the lower part 1200 mm. Upper height H=2280mm Lower height from the floor - 950 mm. These conveyors are used and in very good condition. All offered conveyors are checked in our company before sale. Please contact us to check availability. The price is for the whole conveyor and its construction (see picture). Any configuration is possible. Kfodpfx Afoix Nmzsfja !! We offer large quantities of the proposed goods in various configurations !!!

Year of construction: 2005, condition: like new (used), Climbing device / Facade climbing device Kodshydxzjpfx Affefa Power Climber Facade lift / Facade climbing basket The device comes from government ownership and, according to the authorities, has never been used. The device can be loaded and shipped!

Condition: excellent (used), Year of construction: 2017, For sale is a bucket elevator/chute/conveyor in excellent condition. Made of stainless steel, 3mm thick. - Swedish production. - height about 8.3m (can be shortened) - made of stainless steel. - gear motor 4 kw. - inner hole of the pipe 23 cm x 26 cm Kfedpfjxnpgaex Affoa - bucket size: 18 cm, also stainless steel. - 6 buckets per meter. - there is a control panel. - pneumatic distributor. - dust extraction system with a fan. Price 4600 eur There is also an identical chute, only made of black metal. Price 3000 + VAT.

Condition: excellent (used), REF: MM6214 1 X Outfeed stainless-steel framed elevator conveyor. Technical specification ⚙️ ✅ Belt width - 330mm. Kfedpfx Afsxd Uplefja ✅ Infeed height - 150mm. ✅ Outfeed height - 1050mm. ✅ Overall dimensions - 2000mm long x 600mm wide x 1140mm high. Note 🗒️ Previously used as outfeed from VFFS bagger.

Condition: used, Cutter SCM Kfedpfx Afeuzivpefja

Condition: used, Year of construction: 2007, turning length 2500 mm Kedpfxswwaruj Affsfa control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: new, functionality: fully functional, warranty duration: 6 months, New log carriage, 17° inclined Log length: 2 – 5 m Diameter: 200 – 1000 mm Clamping dogs: 3 units Clamping dog opening: 1000 mm Longitudinal adjustment: 1 dog adjustable – 2 dogs fixed Clamping jaw opening: 900 mm Kfodoxl Thcspfx Affja Clamping dog adjustment: servo-electric Cable drive: 45 kW

Condition: used, Used bucket elevator with plastic buckets from Apollo High capacity (15 t/h) Kjdpsxd U Egofx Affefa Lifting height = 6.66 m Gentle product handling Some buckets only 3 years old! Bucket width = 750 mm Hydraulic chain tensioning

Condition: new, Year of construction: 2025, Vice is made of high-quality cast iron. Due to its precise guiding, this vice is used in industries where precision is key. Swivel base allows for 360o adjustment in the horizontal plane, and 90o adjustment in the vertical plane. Jaw inserts made of tool steel, hardened (55+- 3HRC) and precisely ground. Vice features Cast iron rotary QHK machine vice, useful while working with grinding, milling, drilling and planing machines, etc. Made of high-quality cast iron Equipped with swivel base with 360o pitch, 1o gradation Kfodjvxgkzopfx Affea Body, along with the moving jaw, is made of high-quality cast iron Top side of the lead screw secured from dirt and chips Possible disassembly of the swivel base While replacing inserts it is advised to machine their surfaces attached to the vice in order to achieve the accuracy parameters specified in the technical documentation

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, We now have 2 well-maintained Kardex Shuttle XP 1000 Vertical Lift Modules. These units are in excellent condition and have been regularly serviced to ensure they perform at their best. Each machine comes equipped with approximately 40 trays of varying load capacities. Specifically, 20 trays have a capacity of 535 kg each, while the other 20 trays can handle up to 950 kg. This flexibility allows for efficient storage and management of materials with different weights and volumes. What sets these vertical lift modules apart is their slightly narrower outer width of 2,180 mm and tray width of 1,850 mm. Machines with these dimensions are rare in the second-hand market but are highly sought after due to their ability to fit into tighter spaces. Specifications: Kjdpfx Asuhvpmjffsfa Height: 7 950 mm Width vertical lift module / tray: 2 180 mm / 1 850 mm Depth vertical lift module / tray: 3 100 mm / 864 mm Number of trays:Approx. 40 Maximum weight per tray: 535 kg - 950 kg Electronics: 3/N/PE 400V, 23A The machines is right now located in Denmark, Copenhagen and are avalible for delivery in December.

Condition: excellent (used), Year of construction: 2013, - Content: 68 + 7 HL - With vibrating beak - 3 side elevation of the hopper - Lifting frame, max. lift: 1000 mm - Max. discharge height: 2150 mm Ksdpfxsq Uk Rls Affefa - Machine only very little used - In very good condition Dimensions : - Hopper length : 4740 mm - Width : 2200 mm - Dump height : 1440 mm

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Kfodpfx Asv Nw Npeffja Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: new, Year of construction: 2020, machine/vehicle number: 198.06.00005, Electric scissor lift 9.9 M Max. working height: 9.9 m Max. platform height: 7.9 m Overall width: 1180 mm Platform length: 2450 mm Platform dimensions: 2250 x 1160 mm Extendable platform: 900 mm Rated lifting capacity: 460 kg Battery: 24V DC (4 x 6V225Ah) Operating weight: 2,400 kg Kfodpfx Asgdyybjffsa

Condition: excellent (used), Year of construction: 2020, Shredder, ideal for pallet shredding, with inclined conveyor belt and magnetic drum. Rotor width 1000 mm, rotor diameter 368 mm. 56 knives on the rotor, 40 x 40 mm concave. 45 kW motor. Various screen sizes included. Kfsdpfow Tyflox Affea

Condition: ready for operation (used), A vertical upward clamping jaw elevator and a vertical downward clamping jaw elevator in stainless steel design are available. This is a conveyor system for overcoming height differences in production lines. Bottles, jars, cans and also cartons etc. can be conveyed upwards and downwards. (1) Upward elevator, output: 14,000 cans/h (empty containers open), speed: 25m/min, format diameter: 100mm, format height: 50-80mm (400g), total length with infeed and outfeed section: 2500mm, frame width: 1050mm, infeed height: 900mm, outfeed height: 2600mm, height difference: 1700mm, drives: frequency-controllable, motor power: 1.1kW. (2) Downward elevator, output: 14,000 cans/h (empty cans open), speed: 25m/min, format diameter: 100mm, format height: 80mm (400g), total length with infeed and outfeed section: 2500mm, frame width: 1050mm, infeed height: 900mm, outfeed height: 2600mm, height difference: 1700mm, drives: frequency-controllable, motor power: 1.1kW. On-site inspection is possible, were completely overhauled in the past. Ksdpfou Av Egex Affsfa

Condition: used, Year of construction: 2006, functionality: limited functionality, machine/vehicle number: 503487, Elevator, belt missing. 1400mm ALAP ZN 200, Antti-Teollisuus for sale Kfedpfxswiub Uj Affea

Condition: new, Year of construction: 2025, Abrasive Media Preparation 1x Sweeping Pit 1x Bucket Elevator 1x Air Separator 1x Electric Vibrating Sieve 1x Abrasive Media Hopper 1x 200l Pressure Blast Unit 1x Blast Hose, Blast Nozzle, Deadman Switch, Control Line 1x Control Cabinet Optional Accessories: - Cross Conveyor Screw over the entire blast room width (also serves as additional buffer storage for several hours of blasting) - Extension for 2 abrasive media types, ferritic and mineral - Drum Magnetic Separator Kodpfew Ivvcsx Affjfa - Final Demagnetizing Stage - Magnetic Drawer

Condition: ready for operation (used), Kardex Shuttle XP systems in stock: - 1 x Kardex Shuttle XP 250, height: 3950 mm - 2 x Kardex paternoster, height: 4000 mm - 1 x Kardex Shuttle XP 250, height: 5050 mm - 1 x Kardex Shuttle XP 500, height: 5980 mm - 1 x Kardex Shuttle XP 500, height: 6050 mm - 1 x Kardex Shuttle XP 250, height: 6450 mm Kodpowgz Rdsfx Affefa - 1 x Kardex Shuttle XP 250, height: 6950 mm - 1 x Kardex Shuttle XP 500, height: 7050 mm - 14 x Kardex Shuttle XP 500, height: 8550 mm - 3 x Kardex Shuttle XP 500, height: 9350 mm Machinehandel De Leeuw BV is one of the few companies in Europe that trades and stocks mainly used Kardex Remstar VLM automatic lift systems (Shuttle systems) and rotating storage systems (paternoster systems). See our website for the current stock. We assemble and/or dismantle these systems safely with VCA-certified technicians and have been doing this for more than 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, and Denocard.

Condition: new, Year of construction: 2025, - Cutting Force : 1600 Tons - Capacity : up tp 70 tons per hour - Side Compression Force : 2 x 220 Tons - Clemp Compression Force : 250 Tons - Electric Motor : 480 kW Kfsdpfx Afsgv Acuefsa - Machine Weight : 150.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW An Inclined Shear is a heavy-duty machine used in metal recycling facilities to cut various types of scrap materials efficiently. • Mixed and heavy-duty scrap can be processed (HMS 1 & 2, cars, pipes, etc. ) • No scrap length limit • No operator needed • Cut length adjustment options • Electric and Diesel options • Stationary and semi-mobile options • Hydraulic blade tightening system • The guillotine is made of casting • A remote diagnostic system is implemented • Automatic lubrication • Good output density • Heavy-duty structure • Chrome-plated & tampered shafts and sensitively honed cylinders • Special anti-wear plates Kodpfogv Abpsx Affefa • Reliable filtration system for the hydraulic oil • Reliable cooling system depending on the working climate • Top-brand hydraulic and electronic components The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Model: IS 1350 Cutting Force: 1.350 ton Hold Down Force: 250 ton Side Compression Force: 2x200 ton Cutting Width: 1.040 mm Number of Cuts: 2-3 cuts/min. Capacity up to 50 ton/h Weight: 128 ton Electrical Motor Power: 3x132 kW Chamber Dimensions: (W x L) 2,45 m x 8,5 m. General Dimensions: (W x L) 4,6 m x 11 m.

Condition: new, Year of construction: 2025, - Cutting Force : 700 Tons - Capacity : up tp 20 tons per hour - Side Compression Force : 2 x 85 Tons - Clemp Compression Force : 100 Tons - Electric Motor : 160 kW - Machine Weight : 55.000 kg - PLC Controlled Ksdpfjgv Aacsx Affjfa - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, - Cutting Force : 900 Tons Kedpjgv Aa Isfx Affefa - Capacity : up tp 25 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 220 kW - Machine Weight : 78.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable