Used Inch Series M for sale (32,399)

Condition: used, Year of construction: 2009, Overview This KEG bottling unit Micromat 2/2-b was built by M+F KEG Technik in 2009. It is composed of a KEG washer and KEG filler. Until dismantling it was used in a brewery in Belgium. Technical details  Capacity: 20- 35 keg/h KEG type: 20l/30l DIN and EURO Fitting type: Typ S Station 1: Interior cleaning Station 2: Rinsing, sterilization and filling Semi automatic system with intergrated CIP, CIP tank at the back of the installation Dimensions  Length: 1,100 mm Width: 1,300 mm  Height: 2,200 mm +/- 50 mm  Electrical connection Voltage: 230/ 400 V, 50 Hz, 3 phases Connected load: 0,5 kW (without tank pumps)  Cjdpfx Aexrfcxob Tjhf

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min Chjdpfsxur Sfjx Ab Tef • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: Chipboard 38 mm, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights are available on request. Our team will be happy to advise you! Delivery scope: - Columns - Main and secondary beams - Bracing cross-members - Flooring - Fastening materials PRICES: Variant I: Base area: 25 m² | Area: 5,000 x 5,000 mm | €2,711.50 net, plus transportation and VAT. Variant II: Base area: 50 m² | Area: 5,000 x 10,000 mm | €4,756.00 net, plus transportation and VAT. Variant III: Base area: 75 m² | Area: 5,000 x 15,000 mm | €6,659.80 net, plus transportation and VAT. Variant IV: Base area: 100 m² | Area: 5,000 x 20,000 mm | €8,662.00 net, plus transportation and VAT. Variant V: Base area: 100 m² | Area: 10,000 x 10,000 mm | €8,381.70 net, plus transportation and VAT. Variant VI: Base area: 150 m² | Area: 10,000 x 15,000 mm | €12,162.50 net, plus transportation and VAT. Variant VII: Base area: 200 m² | Area: 10,000 x 20,000 mm | €15,136.80 net, plus transportation and VAT. Variant VIII: Base area: 300 m² | Area: 20,000 x 15,000 mm | €22,782.72 net, plus transportation and VAT. Further variants available upon request. Optional accessories: - Guardrails - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS WITH US: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp Cjdpfx Abjxdvhps Tehf ⚙️ CUSTOM PLANNING & TAILOR-MADE PRODUCTION This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and the intended area of application. Our planning department will provide you with an individual, non-binding quotation based on your specifications. Whether for new construction, expansion, or modernisation of existing systems – we support you with sound technical expertise and practice-oriented solutions. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The additional costs depend on the delivery location and the scope of the order and can be requested from us individually. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The price is stated per unit/excluding VAT, or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry, and crafts. We continuously offer attractive used deals from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, tank capacity: 425 l, GENERAL Equipment: Spray head, control cabinet (no guarantee) Design: upright Heating/Cooling: available Insulation: available Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Agitator: magnetic stirrer Mounting type: mobile frame Location: External storage Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 425 liters Double jacket volume: 28.0 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: pharmaceuticals TANK Max. tank operating temperature / °C: 150 °C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar EQUIPMENT Manhole / dome: hand hole Outlet: available AGITATOR Codpfx Absxqaf Se Tehf Agitator arrangement: bottom-mounted

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW Chedpfx Aslvtm Seb Tsf - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2011, Technical details: Cjdpfx Asu N Artjb Tehf measuring range X-axis: Länge: 0 - 160 mm measuring range Y-axis: Höhe: 0 - 425 mm Tool table: Auflage: Ø 95 mm tool taper: SK 50 tool taper: drehbar 360° weight: 12 kg dimension L-W-H: 420 x 165 x 775 mm This is a bench top unit. Application: Alignment of rotary milling tools. Measuring method: manual alignment with/via digital display Measuring bar manually movable Measuring beam transverse (X) 160mm and vertical (Y) 425mm movable with measuring sensor Measuring display: both axes digital, voltage 1.5 V (AA battery) *

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Incl. Sampling unit specicon Cedpfx Ajir E E Eeb Tshf

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, The best onion peeler in the world, the most expensive but the hardest, the most simplest ! Fully services, we can offer full support for our clients, machine been fully refusrbishment and ready to work. Capacity of peeled product depending of onion size: Pjtx Eswb Uuxodn Dorc 50-70 mm +-250 kg/h 60-80 mm +-450 kg/h 70-90 mm +-750 kg/h 90mm+ +- 1000 kg /h Csdpfoxta U Ejx Ab Tshf Machine is fully stainless steel ! Very little used after full service ready to work, we help you with technical support and with spare parts ! Machine require air screw compressor min 2700 l/m 5-8 bar We can help configurate your factory!

Condition: excellent (used), Year of construction: 2020, L+M EcoCell 3.9-1200 C Dust Extraction System TECHNICAL DATA Manufacturer: L+M AG Model: EcoCell 3.9-1200 C Year of Manufacture: February 2020 Airflow Volume: 3,000 m³/h Voltage: 400 V Current Draw: 7.60 A Power: 5.50 kW Frequency: 50 Hz ATEX Compliance: ATEX 2014/34/EU Control System: Reco RM-DPC Micro FP Filter Status Display: FC-240 Spark Detection: Control Logic PAN-705 Spark Control Panel Filter Elements: 9 units SCOPE OF DELIVERY Includes (not an exhaustive list): - L+M EcoCell 3.9-1200 C dust extraction system - Filter status display - Spark monitoring system - 9 x filter elements - VDL rotary airlock with motor drive - Control cabinet with operator controls - Additional WESCO separator Chsdpfx Absxflx To Tof Exact scope of delivery as shown in the photo series The L+M EcoCell 3.9-1200 C dust extraction system was built in February 2020 and offers a high-performance and safe solution for industrial extraction and filtration tasks. With an airflow volume of 3,000 m³/h, a power rating of 5.50 kW, and robust ATEX certification according to 2014/34/EU, the system is ideally suited for use in hazardous (explosive) environments. It features a state-of-the-art Reco RM-DPC Micro FP control unit and an FC-240 filter status display for precise system monitoring and management. For added safety, it is equipped with a PAN-705 spark detection system. Nine high-performance filter elements ensure efficient separation of dust particles. The configuration also includes a motor-driven VDL rotary airlock, a control cabinet with operator elements, and an additional separator from WESCO. This combination guarantees a reliable, safe, and durable dust extraction solution for demanding industrial applications. No guarantee is provided for the accuracy, completeness, or timeliness of the information.

Condition: used, XSK-400 Rubber Mixing Mill – Two-Roll Open Type | Wuxi Double Elephant Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XSK-400 Country of Manufacture: China Technical Data: Roller Diameter: 400 mm Working Width: 600 mm Roller Speed ​​Ratio: 1 : 1.35 Front Roller Speed: 17.45 m/min Main Motor Power: 45 kW Motor Speed: 980 r/min Voltage: 380 V Frequency: 50 Hz Batch Capacity: Approx. 20-30 kg Machine Weight: Approx. 7,000–8,000 kg Description: The XSK-400 Mill for Rubber is a high-quality two-roll open mixing mill manufactured by Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. (China). Designed for rubber compound mixing, warming, and sheeting, this machine ensures stable performance, precise temperature control, and long-term durability. Perfect for industrial rubber production, hose and seal manufacturing, and laboratory compound processing. Main Features: Heavy-duty chilled cast iron rolls with excellent hardness and finish Water-cooled drilled rolls for temperature stability Low-noise hardened gear transmission for smooth performance Motorized nip adjustment for roll spacing precision Safety stop controls and reliable electrical components Durable construction, easy maintenance, and long service life Csdjxrdgvopfx Ab Tehf Applications: Rubber and silicone compound mixing Plastic and rubber sheeting Hose, gasket, and belt manufacturing

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSE 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is installed above the wall + Fan in the height Air capacity: 7,200 m³ / h Motor: 0.75 kW explosion-proof (ATEX) Exhaust air pipe: 500 Ø mm Chjdpfx Absfv Hiqo Tjf depth: 900 mm The pipeline should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Chedpfx Aoxmu T Njb Tef Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: excellent (used), Precision workshop micrometer from renowned German manufacturer Mahr, model Marameter M, designed for highly accurate measurement of external diameters in the range of 0–40 mm. The device is in very good condition, fully functional, and stored in its original wooden protective case. Chedexmlgtepfx Ab Tjf Specification: • Measuring range: 0 – 40 mm • Model: Marameter M • Manufacturer: Mahr (Germany) • Catalogue number: 3206064 • Application: precise measurement of external diameters / shafts / cylindrical components • Durable metal housing • Arm with interchangeable measuring tips • High measurement stability and repeatability • Comes with the original wooden case Condition: • Used, very well preserved • Last calibration: 2023 • Ready for use in a measurement room or laboratory.

Condition: good (used), Year of construction: 2016, functionality: fully functional, PASSPORT™ Automatic T-Shirt Unloader Chjdpfjqvmkdex Ab Tjf - automatic unloader for textiles - fully working - not much use

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system for 6 m room size with 1 m auger extension with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Chjdpfxouq Iy Rj Ab Tef Photo is from another system as mine is still packed

Condition: used, XK400×1000 Rubber & Plastic Mixing Mill – High-Performance Two-Roll Mill Chsdpfxexrc Eqe Ab Tof Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XK400×1000 Main Technical Data: Roll diameter: 400 mm Working length: 1000 mm Front roll speed: 14.85 m/min Rear roll speed: 18.85 m/min Speed ratio: 1 : 1.27 Max roll gap: 10 mm Batch capacity: 25–35 kg Motor power: 37 kW (Siemens IE3 motor) Control system: Siemens S7-300 PLC with Profibus Length: 4400 mm Width: 1710 mm Height: 1850 mm Weight: ~8500 kg Description: The XK400×1000 Mixing Mill is a heavy-duty two-roll open mill designed for rubber and plastic compound mixing, warming, and sheeting. Built with precision alloy rolls, Siemens electrical control, and a robust gear transmission system, this machine ensures stable, low-noise operation, high efficiency, and long service life — perfect for industrial rubber production, laboratories, and plastic processing plants. Key Features: Alloy chilled cast iron rolls – HS70±2 hardness for long life Water-cooled drilled rolls with rotary joints for temperature control Low-noise gear drive with hardened gears Motorized roll gap adjustment (0.5–10 mm) Forced thin-oil lubrication system 4 emergency stop buttons for operator safety Premium Siemens control & electrical components Applications: Rubber compounding and mixing Sheet forming for rubber and plastics Hose, seal, and belt production

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 30.20 Dry splash wall Cjdpfx Asfr T Emob Tshf Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: new, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other variants available] - Grid spacing: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard P6, raw/white - Load capacity: 500 kg - Colour: RAL color of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights are available on request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing cross-members - Flooring - Fastening material PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus transport costs and VAT. Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus transport costs and VAT. Variant III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus transport costs and VAT. Variant IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus transport costs and VAT. Variant V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus transport costs and VAT. Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus transport costs and VAT. Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus transport costs and VAT. Additional configurations available. Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg Codpfxexpizts Ab Tohf - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your warehouse platform exactly according to your operational requirements – tailored to area, load-bearing capacity, platform height, and intended application. Our planning department will prepare a custom, non-binding offer for you based on your specifications. Whether new construction, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipment is available at an additional cost. The extra costs depend on the place of delivery and the size of the consignment, and can be specified individually on request. PAYMENT TERMS Payment terms will be agreed upon when placing the order. The price is to be understood as unit/net price or as stated in the description (plus VAT). You will of course receive an invoice showing VAT. ABOUT US The company DLK, located in Nordhorn, deals in new and used products for warehousing logistics, conveying technology, mezzanine floors, textile storage solutions, as well as in machinery for commerce, industry, and craft trades. We constantly offer attractive used machines from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us at any time. ✅ Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Chsdpsfr T Eqsfx Ab Tsf Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: new, TECHNICAL DATA: - Footprint: 15,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm particle board (P6 raw/white) - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms are expandable in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Delivery scope: - Columns - Primary and secondary beams - Bracing crossbars - Flooring panels - Fastening materials PRICES: Variant I: Footprint: 30 m² | Area: 5,000 x 6,000 mm | €3,598.65 net, plus transport costs and VAT. Variant II: Footprint: 60 m² | Area: 5,000 x 12,000 mm | €6,418.50 net, plus transport costs and VAT. Variant III: Footprint: 60 m² | Area: 10,000 x 6,000 mm | €6,423.45 net, plus transport costs and VAT. Variant IV: Footprint: 90 m² | Area: 5,000 x 18,000 mm | €9,104.40 net, plus transport costs and VAT. Variant V: Footprint: 120 m² | Area: 5,000 x 24,000 mm | €11,890.80 net, plus transport costs and VAT. Variant VI: Footprint: 180 m² | Area: 10,000 x 18,000 mm | €16,281.60 net, plus transport costs and VAT. Variant VII: Footprint: 240 m² | Area: 10,000 x 24,000 mm | €21,471.36 net, plus transport costs and VAT. Further variants available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision guard YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp Codpjxpizasfx Ab Tjhf ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your requirements – tailored to surface area, load capacity, installation height and intended area of use. Based on your specifications, our design department will prepare an individual, non-binding offer for you. Whether new construction, expansion or modernization of existing systems – we support you with expert know-how and practical solutions. TRANSPORT & INSTALLATION We are happy to assist with the transport and installation of the goods. This item is available for collection. Delivery or shipping is available for an additional charge. Additional costs depend on the delivery location and volume of the shipment and can be quoted individually on request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The stated price is per unit/net, or as specified in description (plus VAT). You will of course receive an invoice with VAT indicated. ABOUT US The company DLK in Nordhorn deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The building blocks of success at DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Please let us know your volume flow and we will select the right cyclone for you. Different versions available: - Legs, made of painted square steel profiles - Rotary valve and transition piece with inspection flap - Inlet box with non-return valve - Tangential outlet with/without pressure relief surface - Square diffuser with/without pressure relief surface - Sound insulation Of course you can also obtain all accessories from us such as fans, exhaust pipes, deflector hoods etc. Functionality: The polluted air is tangentially fed into the cylindrical upper part is introduced, causing the air to rotate. The material is placed under the Influence of the centrifugal force in the direction of the cyclone circumference pressed out and led out through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located Outlet pipe on top. The deposition efficiency increases with the feed rate, but also the pressure loss and thus the energy consumption. It is therefore it's important to find a good compromise. We have developed a range of cyclones optimised for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry Chjdpfx Ajftb Ebob Tof At the bottom, the cyclone can be designed with the correct size based on the air volume and a typical pressure drop in the range of 1000 Pa can be selected. Operating pressure +/- 5

Condition: new, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm Chsdpfx Abexpil Es Tof - Clear height: 3,000 mm - Floor covering: 38 mm chipboard, raw/white, P6 grade - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended modularly as per the specified grid. Other sizes and heights available upon request. Our team is happy to advise you! Delivery scope: - Columns - Primary and secondary beams - Bracing crosses - Floor covering - Fastening materials PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €3,400.00 net, plus shipping and VAT Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €6,008.00 net, plus shipping and VAT Variant III: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €6,043.20 net, plus shipping and VAT Variant IV: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €8,512.54 net, plus shipping and VAT Variant V: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €11,154.85 net, plus shipping and VAT Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €15,343.02 net, plus shipping and VAT Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €20,081.60 net, plus shipping and VAT Additional variants available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING This platform system is an example from our standard range. Of course, we plan and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and intended usage. Our design department will prepare a custom, non-binding quote based on your specifications. Whether you are planning a new installation, an extension, or a modernization of existing equipment, we support you with professional expertise and practical solutions. TRANSPORT & ASSEMBLY We would be pleased to assist you with the transport and installation of the equipment. This item is available for collection. Delivery or shipping is possible at an additional cost. Additional costs depend on the destination and shipment scope and can be provided individually upon request. PAYMENT TERMS Payment terms are agreed upon at the time of order. Prices are per unit/net price unless otherwise specified (plus VAT). You will of course receive an invoice with listed VAT. ABOUT US DLK Nordhorn trades in new and used products for warehouse logistics, conveyor technology, warehouse platforms, textile storage, and machinery for commerce, industry, and the trades. We continuously offer attractive used equipment from various manufacturers/brands at favorable conditions. Please feel free to get in touch with any questions. ✅ Four wins – The success building blocks from DLK – Storage technology | Levelmaker® | Logistics | Solutions

Year of construction: 2020, condition: refurbished (used), Painting cube on rollers Ready to plug in 230 V Motor power: 1,1 kW volume flow: 2.500 m³/h Dimensions: 1200 x 1200 mm W X H Cjdpefuhu Aofx Ab Tshf Hose connection rear bottom side: 250 mm Double filtration system paper filter and Paintstop filter mat Spray booth Paint mist Dry spray wall Spray wall Paint wall

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof Csdjfn Ndcepfx Ab Tjhf exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Cedsfn Nddopfx Ab Tohf Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.