Used Inch Series M for sale (73,429)

Year of construction: 2020, condition: refurbished (used), Painting cube on rollers Ready to plug in 230 V Ppedpfxefuhu Ao Aalsl Motor power: 1,1 kW volume flow: 2.500 m³/h Dimensions: 1200 x 1200 mm W X H Hose connection rear bottom side: 250 mm Double filtration system paper filter and Paintstop filter mat Spray booth Paint mist Dry spray wall Spray wall Paint wall

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H Pjdpfefn Ndcox Aalepl + Fan in the height Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Ppsdpfxofn Ndds Aalsl Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: used, mileage: 440,000 km, power: 390 kW (530.25 HP), first registration: 03/2003, fuel type: diesel, overall weight: 32,000 kg, gearing type: mechanical, Equipment: ABS, air conditioning, all wheel drive, crane, DAF 95XF - 530 Swap Body System - Tractor unit (articulated truck) or truck with platform body First registration: km 8x4 Leaf spring suspension front/rear Manual transmission Euro 3 emission standard Crane: Palfinger PK 90002 Year 2002 Radio remote control Winch Hook height approx. 35 meters 7x hydraulic extensions Fly Jib PJ154C on Fly Jib: 4x hydraulic + 2x mechanical extensions Tel: We are happy to assist you with financing or leasing EU sale: net price with company documents and VAT ID number VAT deposit €2,000 We speak English We speak Serbo-Croatian Our services for you: - Export registration plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation available - Shuttle transfer from Munich Airport or Passau train station Tel: Ppodpfjyamlrsx Aaljl

Condition: used, mileage: 440,000 km, power: 390 kW (530.25 HP), first registration: 03/2003, fuel type: diesel, overall weight: 32,000 kg, gearing type: mechanical, emission class: euro3, Equipment: ABS, air conditioning, all wheel drive, DAF 95XF - 530 Swap Body System - Tractor unit (articulated truck) or truck with platform body First registration: km 8x4 Leaf spring suspension front/rear Manual transmission Euro 3 emission standard Crane: Palfinger PK 90002 Year 2002 Radio remote control Winch Hook height approx. 35 meters 7x hydraulic extensions Fly Jib PJ154C on Fly Jib: 4x hydraulic + 2x mechanical extensions Tel: We are happy to assist you with financing or leasing EU sale: net price with company documents and VAT ID number VAT deposit €2,000 We speak English We speak Serbo-Croatian Our services for you: - Export registration plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation available - Shuttle transfer from Munich Airport or Passau train station Tel: Ppedpfxeyamlxe Aalol

Condition: used, mileage: 440,000 km, power: 390 kW (530.25 HP), first registration: 03/2003, fuel type: diesel, overall weight: 32,000 kg, gearing type: mechanical, Equipment: ABS, air conditioning, all wheel drive, crane, DAF 95XF - 530 Swap Body System - Tractor unit (articulated truck) or truck with platform body First registration: km 8x4 Leaf spring suspension front/rear Manual transmission Euro 3 emission standard Crane: Palfinger PK 90002 Year 2002 Radio remote control Winch Hook height approx. 35 meters 7x hydraulic extensions Fly Jib PJ154C on Fly Jib: 4x hydraulic + 2x mechanical extensions Tel: We are happy to assist you with financing or leasing EU sale: net price with company documents and VAT ID number VAT deposit €2,000 We speak English We speak Serbo-Croatian Our services for you: - Export registration plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation available - Shuttle transfer from Munich Airport or Passau train station Podpfxoyamllj Aalepl Tel:

Condition: excellent (used), CATALOG NO. 6985 Podex Swu Aspfx Aaljpl TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Conveyor belt, conveyor line, conveyor system, Used machine Manufacturer: M Fördersysteme Type: GFV/2 Overall dimensions: Width: 3100 mm Ppedpfx Asx Sd Shealsl Depth: 810 mm Height: 1100 mm Electrical data: 380V Belt size: 2590 × 580 mm Belt speed: 3.5 m/min Year of manufacture: 2005

Condition: used, mileage: 229,000 km, power: 228 kW (309.99 HP), first registration: 08/2005, overall weight: 18,000 kg, fuel type: diesel, gearing type: mechanical, Equipment: ABS, all wheel drive, crane, MAN TGA 18.310 First registration: 08/2005 !!!! ONLY 229,000 km !!!!! 4x4 - ALL-WHEEL DRIVE Wheelbase: 4500 mm Leaf spring suspension front/rear !!!!! RECOVERY WINCH AT THE REAR !!!!! !!!!! Winch for vehicle recovery !!!!! Crane: Palfinger PK16502 4x hydraulic extension/boom 2x mechanical extension/boom REMOTE - radio control Crane test book Hook height approx. 20 m Phone: We are happy to assist you with financing or leasing EU Sale: net price upon submission of company documents and VAT number We speak English We speak Serbo-Croatian Our services for you: - Export license plates - Export documents and EUR1 certificate - Worldwide transport Podpjx U N A Dsfx Aalopl - Accommodation options - Transfer from Munich airport or Passau train station Phone:

Condition: used, mileage: 229,000 km, power: 228 kW (309.99 HP), first registration: 08/2005, overall weight: 18,000 kg, fuel type: diesel, gearing type: mechanical, Equipment: ABS, all wheel drive, crane, MAN TGA 18.310 First registration: 08/2005 !!!! ONLY 229,000 km !!!!! 4x4 - ALL-WHEEL DRIVE Wheelbase: 4500 mm Leaf spring suspension front/rear !!!!! RECOVERY WINCH AT THE REAR !!!!! !!!!! Winch for vehicle recovery !!!!! Crane: Palfinger PK16502 4x hydraulic extension/boom 2x mechanical extension/boom REMOTE - radio control Crane test book Pedsx U N A Rjpfx Aalepl Hook height approx. 20 m Phone: We are happy to assist you with financing or leasing EU Sale: net price upon submission of company documents and VAT number We speak English We speak Serbo-Croatian Our services for you: - Export license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation options - Transfer from Munich airport or Passau train station Phone:

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. Ppedpfx Aaexa H Ewolol If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. Podpfx Aewzmcbjaljpl OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system Pedpfewfgbrsx Aalopl 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Year of construction: 2011, condition: used, Make: B&M, Year of manufacture: 2011, 2x degreasing, 2x rinsing, 1x residual water dryer, heating medium: natural gas, wastewater treatment unit, make Loft, burner, make Buderus, desalination unit, heat exchanger, switch and control cabinets, platform system, accessories Ppedpfxjx R D Ndj Aalel +++ Attention: Machine is part of an online auction! +++

Condition: used, Manufacturer: WIMACH-M Type: process vessel Ppjdpfx Asx R Dy Asalel Single jacket Total volume: +/- 2750 Litres Useful volume: 2500 liters Stirring power : 0,77 Kw

Year of construction: 2011, condition: used, Make: B&M, Year of manufacture: 2011, Part size: 1,200 x 800 x 400 mm, comprising: 4 painting robots, paint dryer, heat medium natural gas, max. temperature 100°C, exhaust air volume flow 1,500 m³/h, circular conveyor system by Hero, batch of load carriers, control and switch cabinets, preparation and supply racks, platform system, stairway access, accessories. +++ Attention: Machine is part of an online auction! +++ Pjdpfx Ajx Ry Rdsalepl

Condition: good (used), Transformer, converter, inverter, three-phase autotransformer -Input: 220 V -Output: 29.5 V 17 A -Technical data: see photos -Quantity: 2 available Ppodpfjb S Htdex Aaljl -Price: per piece -Dimensions: 140/120/H120 mm -Weight: 12 kg

Condition: good (used), Turning unit, turning device, turning table, conveyor belt, container turning device, welding turning device, welding device Podpfsca Iatjx Aalopl -Drive motor: 0.15/0.60 kW -Speed: 15/64 rpm -sealed: slewing ring -Device is: pneumatically tiltable -Dimensions: 2520/800/H380 mm -Weight: 524 kg

Condition: excellent (used), mileage: 575,974 km, power: 132 kW (179.47 HP), first registration: 02/2014, fuel type: diesel, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2014, Equipment: AdBlue, = Additional Options and Accessories = - PTO (Power Take-Off) = Remarks = WMAN13ZZ4EY312503 = Further Information = Unladen weight: 5,860 kg Payload: 1,630 kg Gross vehicle weight: 7,490 kg Pump: Yes Technical condition: very good Visual condition: very good Please contact Sales for further information. = Company Information = If you have any questions or suggestions, please do not hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the given information. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber) MOB: Dutch (Available on WhatsApp and Viber) When paying by bank transfer, the funds must be transferred to our bank account below. Always check the payment details listed on our website. If you have received different information, please contact us. Ppjdewxmdgepfx Aalol If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Ppedjxn Ax Aopfx Aalol

Condition: used, Year of construction: 2011, Technical details: measuring range X-axis: Länge: 0 - 160 mm measuring range Y-axis: Höhe: 0 - 425 mm Tool table: Auflage: Ø 95 mm tool taper: SK 50 tool taper: drehbar 360° weight: 12 kg dimension L-W-H: 420 x 165 x 775 mm This is a bench top unit. Ppodpsu N Artjfx Aaljl Application: Alignment of rotary milling tools. Measuring method: manual alignment with/via digital display Measuring bar manually movable Measuring beam transverse (X) 160mm and vertical (Y) 425mm movable with measuring sensor Measuring display: both axes digital, voltage 1.5 V (AA battery) *

Condition: used, Year of construction: 2003, operating hours: 23,000 h, Equipment: all wheel drive, Liebherr 924 !!! SPECIAL EXCAVATOR FOR FOREST/WOOD !!!! built in 2003 23000h New pump with invoice 16200¤ New engine with invoice 17700¤ 16ton winch with RADIO Psdpfxsvm N Dte Aalopl Balloon tires Hiab wood tongs built in 2016 Tel: We do your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number Sale outside EU: deposit 500¤ we speak English govorimo srpsko-hrvatski our service for you:* Export papers and EUR1 * Customs license plate Transport worldwide * Accommodation options Transfer Munich airport or Passau train station Tel:

Condition: good (used), Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift Ppodpfx Aajl U E Ttolel -Manufacturer: MO Weidmann, material lift assembly lift -Load capacity: max. 225 kg -Lifting height: max 1.78 m -Equipment: with winch, with standard fork -Dimensions: 1240/690/H2230 mm -Own weight: 76 kg

Condition: excellent (used), Continuous mixer M-tec D 10 Drive power 2,2 kW Mixer capacity approx. 20 l/min Pedpfx Aeirfp Ijalepl 14 pieces available Very good ready to use condition, directly from production!!!

Condition: reconditioned (used), Year of construction: 2016, M&J / Metso 6000-12 Preshredder (Mint Condition) 2 × 200 kW HDC with new P30 hydraulic pumps Installed in 20 ft container Complete with oil cooler Cutting table 6000-12 knives Complete with bearings and renovated hydraulic motors. Ready for immediate delivery – excellent condition, barely used. Ppjdjx Satuepfx Aaljl Perfect solution for high-performance shredding and heavy-duty applications. Contact us today for price and availability.