Used Ice Cream Maker for sale (1,521)

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, actuation type: hydraulic, punching force: 80 t, punching diameter: 32 mm, sheet thickness (max.): 20 mm, oil tank capacity: 70 l, overall weight: 2,600 kg, type of input current: three-phase, Equipment: foot remote control, Combined Punching and Shearing Machine Tagliaferri FICEP MOD. 805N. Hydraulic. Twin-cylinder. Used, CE certified. Year of manufacture: 2000. In perfect working condition. Punching force: 800 kN. Punch stroke length: 0 to 40 mm. Maximum punch diameter: 32 mm. Maximum thickness: 20 mm. Round bar cutting: diameter 45 mm. Square bar cutting: 45 mm. Angle bar cutting at 90°: 130x130x14 mm. Angle bar cutting at 45°: 80x80x8 mm. SHEAR FOR FLATS: Blade length: 460 mm. Flat 450x15 mm. Flat 350x18 mm. Flat 200x21 mm. Flat 100x25 mm. At 45°: 100x100x16 mm. RECTANGULAR NOTCHER: Flats: 13 mm. Notcher width: 50 mm. Nodpfxjywtx Ij Ahvocp Notching depth: 100 mm. Flats: 10 mm. Notcher width: 127 mm. Notching depth: 63.5 mm. Working height: 955 mm. Approximate weight: 2,500 kg. Motor power: 7.5 kW. The machine is supplied with various punches.

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. Ncedofbl E Sspfx Ahvsp 7900 kN clamping force. 500 mm plunger stroke Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) The machine is DISMANTLED. Has been repainted recently.

Year of construction: 2014, condition: good (used), Technical data capacitor Volume flow max.: 300m³/h Condenser mass max. in delivery condition: approx. 430mm x1610 mm high Cylindrical part: approx. Ø 273 mm Weight of the chamber in delivery condition: approx. 80 Kg Content upper part (condenser): approx. 30L Content lower part (receiver): approx. 28 L Material elastomers: NBR/FKM/PTFE Temperature condenser max: 1 to 80°C Condenser vacuum max: 0 to 1000 mbar (absolute) (Condenser not suitable for overpressure!!) Temperature exchanger max: 1 to 80°C Medium exchanger: water Njdpfx Aocpwhbshvjcp Water pressure exchanger max: 10bar Exchanger material: CU-tinned Material condenser: stainless steel Technical questions or other sizes on request.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Mixer tank with blender, YIT Industrial and Network Services Ltd 2010. 3000L, stainless steel. ABB motor and SULZER gearbox. Siemens 7ML5221-1AA1, SITRANS Probe LU ultrasonic level transmitter monitors level and volume in liquids and slurries. Sprinkler washing system. Drain outlet at the bottom and a tap on the side. Nsdeylpxfjpfx Ahvocp Condition like new with minimal usage. Estimated motor hours: under 100h. Has been used for clay and glaze. Second tank in main picture included in the price, tank only – no motor, etc.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera Ncodpfxeyvhwie Ahvsp - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: - Print job preparation: UltiMaker Cura 5.7.1 or newer - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: not inspected (used), functionality: unexamined, No reserve price - guaranteed sale to the highest bidder! Nodpfxjyr Hxps Ahvecp Placing a bid obligates timely collection between 04.05.26 and 07.05.26. Auction of the following hand tools: MAKITA straight grinder MAKITA angle grinder MAKRA deburring tool MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 400 x 350 x 150 mm Weight: 20 kg External reference: 33

Condition: used, Oil Mist Extractor, Emulsion Mist Separator, Used Machine Manufacturer: IFS Industriefilter Service GmbH Ncedpfxsyn Rmie Ahvep Type: IFM 2000 Overall dimensions: Width: 1170 mm Depth: 700 mm Height: 1100 mm Weight: 136.5 kg Year of manufacture: 1995 Electrical data: 400V, 1.5 kW, 3.2 A Filter size: 605 x 615 mm

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Nedjv Nztxepfx Ahvocp Type: 1-Chamber Cleaning System Inner Tank: 750 x 600 x 770 mm Year of Manufacture: 2022 THIS DEVICE HAS NEVER BEEN USED.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Boxmaker 2500 working width, fully automatic, 2 flexo printers 500x200 mm, 2 die cutters for hand holes, or depending on the installed die, year of manufacture 2023. Ncedpfx Aoxgbycehvjp

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: Fully functional FICEP 1001 DZB saw and drilling line, including roller conveyors – infeed side max. 18.20 m, outfeed side max. 15.10 m, band saw cutting range up to 1,015 x 450 mm, CNC drilling unit. The machine has been regularly maintained by a specialist company. Sale ex works (without disassembly and reassembly – must be organized by the buyer). The machine is currently still in operation and can of course be inspected. Disassembly and reassembly can be organized – costs to be borne by the buyer. The system is sold as a used unit, without guarantee and without warranty. Ncjdpfeyrnp Ajx Ahvsp

Condition: ready for operation (used), functionality: fully functional, Machines for the production of structural packaging. Comprising a die-cutting platen H-142, year 1986, size 900x1400 mm; boxmaker by Pack Projekt, year unknown – purchased 2009 – feed width 1450 mm – additional creasing bar for height creases – slitting knives 350 mm; plus gluing machine (NOW WE HAVE A BUYER FOR THIS – RESERVED UNTIL 16.03.2026) for self-adhesive tape, silicone band dispenser, and tear strip – feed 1400 mm – year 2010 – hot melt system. All machines are used, operational, and in working condition. SEE PICTURES AND DOCUMENTS. NEW INFORMATION 16.03.2026: If someone is still interested in all three machines please get in touch, as we have made a time-based agreement with the interested party. Purchase of the remaining two machines: €28,000 net ex works (platen + boxmaker). If interested in individual machines, simply send your offer and specify which machine – we will get back to you. Nsdpfxoyan I Is Ahvocp

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Machine has very low hours Njdpfx Aev Iaqyohvjcp

Condition: used, Year of construction: 2014, functionality: fully functional, Single-shaft machine. Dimensions of the feed hopper: 1300 x 1400 mm. Hydraulic pusher with adjustable pressure and speed, depending on the power consumption of the rotating drum. Drive via gear motor with V-belt. Robust rotor made of certified construction steel. Rotor width: 1300 mm. Hopper length: 1400 mm. Rotor diameter: 368 mm. Nedox Anq Hjpfx Ahvjcp Main motor power: 30 kW. Teeth and counter-blades made from wear-resistant material. Replaceable reversible blades. Dimensions of reversible blades: 40x40x20 mm. Replaceable screen basket. Total weight: approx. 3,100 kg. Supply voltage: 380 V – 50 Hz.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Ncjdpfsynzg Hjx Ahvjp Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Year of construction: 2023, condition: as good as new (ex-display), Technical data: Inlet width mm. 650 Chopping height mm. 300 Output approx. 70 - 80 srm/h wood chips Chipping length approx. mm. 25 to 30 Infeed rollers piece 4 Rotor flight circle mm. 800 Chipping knife piece 2 counter knife piece 1 Feed motors kW 2x4,0 with cardan shaft weight approx. 7.000 Kg. infeed : horizontal Machine base : steel, gas-shielded welded Rotor : steel, inert gas welded, dynamically balanced. Bearing : Oversized roller bearings. Bearing housing : steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Hydraulic system consisting of: Hydraulic pump, diaphragm accumulator, Ncodpfsncd Duex Ahvsp cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding by 2 gear motors, direct engagement, NORD GEAR.

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Njdpfx Asncd Azjhvecp Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 Ncedpfxst Tyqmj Ahvep kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, functionality: fully functional, overall weight: 438 kg, The Dana Spicer 24000 series Powershift transmission is a rugged, hydrodynamic transmission designed for off-highway use, intended for heavy duty industrial, mining and construction machinery. It is designed for engines with a power range of 97–120 kW (130–160 hp). MHR model: An integrated unit that is installed separately from the engine (remote mount). Spicer Powershift Transmission series 24000 Model 3019FMHR24341-110 MHR MODEL The MHR Series is an integral transmission and converter assembly mounted remotely from the engine. This assembly minimizes external piping. This 3-speed powershift transmission is designed to handle heavy-duty applications, including lift trucks, rough terrain lift trucks, front-end loaders, rough terrain cranes, and other mining, construction, and industrial machinery. Maximum speed: 3100 RPM. Turbine stall torque: 980 Nm (industrial) / 1115 Nm (utility) Forklifts and rough terrain reachers. Wheel loaders (Front-end loaders). Vehicle cranes (Rough terrain cranes). Mining and construction machinery such as underground mining vehicles. Input Power kW 97 to 120 Input Maximum (RPM): 3100 Nedpfjv Eaqbox Ahvecp Turbine Stall Nm 980 Nm industrial / 1115 Nm Utility PDF brochure Service manual EN Shipping weight: 438 kg 1 piece in stock

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 03/2027, total length: 1,300 mm, total width: 775 mm, total height: 1,360 mm, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, power: 6 kW (8.16 HP), electrical fuse: 16 A, Spiral Mixer Masz SM 120 Kneading machine with advanced and highly robust technology! Digital LED panel control Dough mixer with 2 timer switches Bowl lighting & emergency manual control For min/max. 6 - 120 kg dough Flour dust hood & temperature display Stainless steel bowl and spiral Mobile machine DGUV V3-certified exclusively by us Connection: 400V, 16A-CEE plug Dimensions: 775 x 1300 x 1360/1800mm (W x D x H) Used machine With warranty & spare parts service Option: Delivery service Service package Maintenance contract Spare parts box for enhanced safety Commissioning & training Ncodpfxexxgmxs Ahvsp We have many more spiral mixers in stock!

Condition: good (used), Year of construction: 1984, ram adjustment: 100 mm, total height: 2,685 mm, table width: 1,000 mm, table length: 720 mm, installation height: 450 mm, stroke adjustment: 120 mm, total width: 1,270 mm, total length: 2,310 mm, overall weight: 10,500 kg, pressing force: 160 t, power: 11 kW (14.96 HP), Eccentric Press LE 160 C. Year of manufacture: 1984 (ZTS - Slovakia). Specifications: Maximum pressure: 160 tons. Stroke: 20-120mm. Number of strokes in single stroke mode: 30/min. Number of strokes in continuous mode: 50/min. Ram adjustment: 100mm. Maximum distance between ram and table: 450mm. Throat depth: 340mm. Ram clamping surface: 750 x 380mm. Njdpotzwqgjfx Ahvjcp Table clamping surface: 1000 x 720mm. Mounting hole in ram: Ø 50mm. Working air pressure: 0.4 - 0.6 MPa. Motor power: 11kW. Overall dimensions (Height x Length x Width): 2685 x 2310 x 1270 mm. Weight: 10,500kg. Machine is in good technical condition. Machine can be inspected and tested under power.

Condition: new, Good day, We hereby offer you, without obligation, a remaining stock of new, unused, original packaged sealing elements for occupied cable ducts (conduit pipes) from the manufacturer Formosa Supply Services Co. Ltd. Note: The above-mentioned technical data was taken from the operating manual, manufacturer’s brochures or other sources. We cannot guarantee the accuracy or completeness of this information. Scope of delivery: 1000 pieces of new sealing elements for occupied cable ducts, packed in units of 10 pieces per carton (27 x 26 x 4.5 cm) including a small plastic bottle of lubricant and installation instructions. Application area and condition: The small inflatable cushions are used for fixing and sealing cables with diameters of 0–32 mm in cable ducts (conduit pipes); please see the PDF description for more details. This is a remaining warehouse stock of new, unused, original packaged sealing elements. We would be pleased if these items are of interest to you. Your Mertens & Frowein GmbH Service Team Ncodpfx Ajymdg Hshvep

Condition: excellent (used), Year of construction: 2001, TUBULAR JUICE UHT STERILIZER MADE BY KF ENGINEERING, GERMANY CAPACITY 11 TONS PER HOUR FOR ALL JUICES, INCLUDING TOMATO MAX TEMP. 124 DEGR. C. PLC SIEMENS-7 Ncodpfxjv Tl D Nj Ahvjp

Condition: new, Year of construction: 2026, machine/vehicle number: A1481630, Complete finishing line max. product dim. lenth = 2000mm, width = 750mm, hight = 1000mm Ncsdpfx Ahjbqh R Tjvep max. weight 50kg (higher weight possible) speed up tp max. 1m/min. (higher speed possible) Please contact us for more information.

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. Ncjdpexb Ucaofx Ahvop The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: like new (used), Year of construction: 2010, FICEP ZAAG 1045 BH Main technical specifications - Minimum sawing capacity at 90°: 80 x 10 mm - Maximum sawing capacity at 90°: 1015 x 450 mm - Sawing capacity at 45°: 620 x 450 mm - Sawing capacity at 60° (only available on two flanges with relevant option): 350 x 350 mm - Mitre angles: +45° / -60° Njdpfx Ahswd Ugtjvscp - Bandsaw blade dimension: 41 x 1.3 mm - Bandsaw blade speed: 20 - 100 m/min - Band motor power: 5.5 kW - Working table height: 850 mm